othrwise closing a keepabove or desktop group
window would activate some random window and break
the state as a side-effect
REVIEW: 123783
CCBUG: 346837
CCBUG: 346933
CCBUG: 347212
instead of "just" the direct transient.
Reason is that many windows set dialogs transient
for an entire group (eg. all their document windows)
If there's only one window, that is equivalent to choosing
the direct transient leader.
Originally I wanted to allow this for any amount of
leaders and picked the first one, but that means if
you open 2 kwrite windows (from one PID!) and an
open dialog for kwrite #2 and close the latter,
the focus would be passed to kwrite #1
-> The focus chain is the better choice here.
(One could look up all leaders in the focus chain
OR the stack and use the most recent/top one,
but that's probably voodoo)
REVIEW: 123691
CCBUG: 347437
Moves the implmentation to AbstractClient. Methods are no longer virtual,
setActive calls a virtual protected method which is implemented in Client
for Client specific activation code.
The change is mostly straight forward. Effects are straight forward
adjusted. Client::findModal is moved up, this causes still a few
dynamic_casts to Client. Mostly because Workspace::activateClient still
operates on Client.
apparently some clients (randomly?) set
_NET_WM_USER_TIME to 0 (recorded for libreoffice,
audacity and perhaps firefox), so we allow to
forcefully have them accept the focus here
CCBUG: 340915
REVIEW: 122195
We are only using the UrgencyHint, InputHint and GroupLeader from
WMHints. Those are provided by NETWinInfo, so we can use the
functionality provided by NETWinInfo instead of calling XGetWMHints.
REVIEW: 120162
Use the timestamp from the xcb event which triggers the update whenever
possible. If we don't have access to the latest event, let's at least
update our own xTime prior to using it.
Slightly unrelated change included: Group switches the userTime from
XLib datatype to xcb datatype.
BUG: 335637
REVIEW: 118456
The Xcb::Property can wrap the xcb_get_property call and provides
convenient access methods to read the value of the reply with checks
applied. For this it provides a templated ::value method for reading a
single value or reading an array. There's also a ::toBool and
::toByteArray which performs the conversion directly with default values
for the type and format checks.
Xcb::TransientFor is changed to be derived from Property instead of
Wrapper directly, so that the reading of the property value can be
shared.
Xcb::StringProperty is a convenient wrapper derived from Property to
handle the reading of a string property providing a cast to QByteArray
operator. This replaces the ::getStringProperty from utils. Though the
separator functionality from ::getStringProperty is not provided as that
is only used in one function and handled there.
All the custom usages of xcb_get_property or getStringProperty are
replaced to use this new wrapper. That simplifies the code and ensures
that all properties are read in the same way.
REVIEW: 117574
Only delegated to Cursor::pos() anyway, so let's just use that directly.
Fixes the annoyances of having to mock it in the unit tests which include
utils.cpp.
REVIEW: 116900
Instead of passing the macro based Predicate to findClient it now
expects a function which can be passed to std::find_if.
Existing code like:
xcb_window_t window; // our test window
Client *c = findClient(WindowMatchPredicated(window));
becomes:
Client *c = findClient([window](const Client *c) {
return c->window() == window;
});
The advantage is that it is way more flexible and has the logic what
to check for directly with the code and not hidden in the macro
definition.
In addition there is a simplified overload for the very common case of
matching a window id against one of Client's windows. This overloaded
method takes a Predicate and the window id.
Above example becomes:
Client *c = findClient(Predicate::WindowMatch, w);
Existing code is migrated to use the simplified method taking
MatchPredicate and window id. The very few cases where a more complex
condition is tested the lambda function is used. As these are very
local tests only used in one function it's not worthwhile to add further
overloads to the findClient method in Workspace.
With this change all the Predicate macro definitions are removed from
utils.h as they are now completely unused.
REVIEW: 116916
As can be seen in [1] the patches to KWin were in CVS HEAD before the
protocol got standardized and it never got any adoption. It's neither in
the NETWM spec, nor implemented in Qt4 nor in Qt5. KWin did not even add
the protocol to the NET::Supported property.
Thus it doesn't make much sense to keep a protocol which nobody speaks.
Still the code around the protocol is kept and also the names are kept.
Only difference is that Client::takeActivity got removed and the code
moved to the only calling place in Workspace. Motivated by that change
the enum defined in utils.h is moved into Workspace, it's turned into
a proper QFlags class and used as a type in the method argument instead
of a generic long.
[1] https://mail.gnome.org/archives/wm-spec-list/2004-April/msg00013.html
REVIEW: 116922
They just delegate to same method from NET:: and those were used already
quite a lot in KWin already as classes inherit from NET and thus get it
directly.
REVIEW: 116918
When a client becomes active on a screen with a fullscreen
window on the ActiveLayer, that window needs to be withdrawn
from the active layer explicitly as it does not get this update
with deactivation.
REVIEW: 111084
For all the decoration updates called from Client into the decoration we
also have a signal being emitted. So turning the pure virtual public
functions into slots means we can just connect our existing signals and
get rid off the deep function calls.
The keepAbove/Below signals are changed to take a boolean argument as
needed by KDecoration and a few emitted signals are moved to a better
fitting location.
REVIEW: 110335
Split out the default and installed colormap from Workspace and put them
into an own class Colormaps.
The method updateColormaps is replaced by a slot update in Colormaps and
activeClientChanged signal is connected to this slot.
At the same time the colormap related code is straight forward ported to
xcb.
REVIEW: 110248
It's not a typical singleton as the ctor is not taking a Workspace* and
needs addtional data to be passed to NETRootInfo.
All the initialization code is moved to RootInfo::create() and the tear-
down code is moved to RootInfo::destroyed(). This includes the support
window which used to be a member of Workspace. It's only needed by
RootInfo, so there is no need to have the ownership inside Workspace.
Instead of using a QWidget we just create a normal window through xcb.
It gets destroyed again in the tear-down code after the RootInfo got
destroyed.
REVIEW: 110238
Main motivation for this change is that it's unhandy to have the class
definition in workspace.h and client.h while the implementation is in
events.cpp although nothing in events.cpp uses it directly.
By getting it out of workspace.h we get the header a little bit smaller
which should improve compile time given that it's included almost
everywhere.
In events.cpp the enum usage is changed to NETWinInfo as that's the class
where they are defined.
RootInfo does no longer hold a workspace pointer. Where it's needed it
uses the singleton accessor of Workspace.
REVIEW: 110199
Overall all notifications except compositing suspended by DBus were
configured by default to not have any action. This means all the time we
emit a notification we keep DBus and KDED busy for nothing.
All the cases when a notification is triggered ire also exported to
KWin scripting, so if one really needs to handle something in case a
window is moved, it could be done through a KWin script with much more
context about the event.
REVIEW: 110113
BUG: 258097
FIXED-IN: 4.11
Following the approaches of other split out functionality Screens is a
singleton class created by Workspace.
The class takes over the responsibility for:
* screenChanged signal delayed by timer
* number of screens
* geometry of given screen
* active screen
* config option for active screen follows mouse
The class contains a small abstraction layer and has a concrete subclass
wrapping around QDesktopWidget, but the idea is to go more low level and
interact with XRandR directly to get more detailed information.
All over KWin the usage from QDesktopWidget is ported over to the new
Screens class.
REVIEW: 109839
All activities related code moves into new singleton class Activities.
This class gets only included into the build if the build option is
enabled which means there are less ifdefs all over the code and it also
handles better the moc doesn't like ifdef case.
The class holds the list of open and all activites, the current and the
previous activity and the KActivities::Controller. It also emits the
signals for any activities related changes.
Workspace still contains some activities related code. That is the
adjustment on change of current activity. Nevertheless the code looks
much cleaner now and does not contain the confusing naming conflict with
takeActivity() which existed before.
In all the places where Activities got used the code got adjusted and
quite often the ifdef got added with a fallback for the disabled case.
Many headers included KLocale to use i18n and co. But those methods are
defined in KLocalizedString and not in KLocale.
With KF5 klocale.h does no longer include KLocalizedString causing lots
of compile errors.
