Summary:
A few areas in TabBox perform casts from Toplevel to Client. By casting
to Client instead of AbstractClient the Wayland windows are excluded.
This change addresses the problem by changing the casts where possible.
The only remaining cast to Client is for shading which is not (yet)
supported for Wayland windows anyway.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6273
Summary:
Based on the feedback from discussion on plasma-devel the currently only
default touch action on a screen edge should be window switching. Given
that our default window switcher is located on the left and works very
nicely for touch event it becomes the default action on the left screen.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5551
Summary:
There is a special mode in TabBox which is the noModifierGrab mode. This
is Alt+Tab active without a modifier being hold. This mode is entered
when being activated through screen edges (either pointer or touch). So
far this was not exposed to QtQuick and thus one could not end the mode
using pointer or touch. It is possible to select another window, but not
to activate it. That required the press of a keyboard key.
This setup is rather unfortunate. By exposing the mode to QtQuick we can
react from QtQuick side to it and invoke already exposed functionality to
select and item and directly activate it - existing left-over from the
Plasma Active window switcher.
Test Plan:
Tested on X11 and Wayland with an adjusted lnf package. It kind
of works, but there are additional issues on both X11 and Wayland.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5414
Summary: Last but not least the TabBox gets adjusted for the new touch callbacks.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D5281
Summary:
Prior to this change various event filters performed deep calls into
Xkb class to figure out the modifiers relevant for global shortcuts (aka
consumed modifiers). This shows that this is a general useful
information which should be available to all input event filters
directly.
Thus it's now added to the input events and exposed directly in
InputRedirection so that the calls into Xkb are no longer needed.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3810
Summary:
The interaction is changed to trigger the check for release from the
TabBoxInputFilter instead of reacting on modifier changes. That way
it's possible to check for the relevant modifiers getting released
instead of getting all modifiers in. Also this means that the checks
are only performed when relevant.
BUG: 368590
Reviewers: #kwin, #plasma_on_wayland, bshah
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2773
Summary:
So far TabBox used highlight windows by passing window ids around through
an X property. This doesn't work on Wayland where we don't have window
ids for our TabBox and the Wayland windows.
This change introduces a new Effect::Feature for HighlightWindows which
the HighlightWindowsEffect provides. The EffectsHandlerImpl has a new
method to highlightWindows which it delegates to that effect if it is
loaded by invoking a new performFeature method.
The TabBoxHandler now passes the highlighting to the effects system
instead of updating the x11 property. Thus this works on Wayland and
at the same time improves the X11 side by no longer having to go through
the property protocol.
Test Plan: Verified that Alt+Tab highlights the windows on Wayland correctly.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2630
Summary:
Toplevel::window() is the actual X11 window. This makes it difficult
to use as the generic identifier for both X11 and Wayland. The Wayland
ShellClient already had a windowId() which is now added to Toplevel as
a virtual method. On X11 (Toplevel default) it returns the window().
The method window() now returns XCB_WINDOW_NONE for classes without
the Toplevel::m_client, such as ShellClient. Thus it allows to properly
check whether we are on Wayland or X11.
The code is adjusted to use windowId where a generic id is needed and
to properly check whether the window is valid before using it where
a window() is used.
This also fixes at least one additional unknown issue in
Workspace::setActiveClient
where the windowId of a Wayland client was passed to X11.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1527
The TabBox implements methods for those events and performs same
logic as on X11. Click outside of TabBox closes. If the event is on
the TabBox we don't filter the event out and let the internal filter
forward the event.
By using QWindow we can also find the TabBox window on Wayland where
the winId is not really helpful.
This also changes the elevation from Unamanged to Toplevel, so that
it is no longer X11 specific.
Result: TabBox stays on top of all windows also on Wayland.
This is a temporary workaround for bug 349992 which causes freezes
during startup as kwin and kamd dead lock each other on DBus.
To workaround we don't call Activities::create and check in every
usage of Activities::self() whether the pointer is valid.
As a result kwin_wayland now starts pretty fast.
CCBUG: 349992
The change is mostly straight forward. Effects are straight forward
adjusted. Client::findModal is moved up, this causes still a few
dynamic_casts to Client. Mostly because Workspace::activateClient still
operates on Client.
As external interface it still returns Client* to not force the casts
to be done at usages. This will be changed once the users are migrated
to AbstractClient*.
This is now crucial, because while before
(the minimized) windows were conditionally
shown, but are now always behind the desktop.
Also, it makes the tabbox more consistent.
BUG: 344083
REVIEW: 122679
KGlobalAccel sets the timestamp as a property and we need to set our
x11Time to it otherwise following keyboard grabs might fail.
Requires 61e2a156678eef033b2629f7c72530dc78d7c3ac in kglobalaccel.
when restacking for shaded windows and uncomposited tabboxes
the group check should not be applied since we know better
eg. to restore a former order
CCBUG: 186206
REVIEW: 122469
The build option got introduced for Plasma Active back in a time
when we did not properly aim for convergence. In a Plasma 5 world
we want to have only one shell and one window manager which adjust
itself. This means we don't want a differently compiled kwin for
plasma active, but the same one. Thus the build option doesn't
make much sense any more. A KWin for touch interface needs to support
screenedges for the case that mouse is plugged in.
CCBUG: 340960
REVIEW: 121200
Like with WindowSwitcher the configured value might be for the
look and feel package and thus we should first try to locate it
from the look and feel package.
Both were only added for the use case of Plasma Active. In the next
iteration we won't need the embedded any more as Plasma is able to draw
thumbnails by itself. So there is neither need for the embedded
functionality nor for the D-Bus interface.
REVIEW: 118464
Instead of passing the macro based Predicate to findUnmanaged it now
expects a function which can be passed to std::find_if.
Existing code like:
xcb_window_t window; // our test window
Unmanaged *u = findUnmanaged(WindowMatchPredicated(window));
becomes:
Unmanaged *u = findUnmanaged([window](const Unmanaged *u) {
return u->window() == window;
});
In addition an overload is added which takes the window id to cover
the common case to search for an Unmanaged by its ID. The above example
becomes:
Unmanaged *u = findUnmanaged(window);
The advantage is that it is way more flexible and has the logic what
to check for directly with the code and not hidden in the macro
definition.
Forward all key press events to the TabBox if it is currently grabbed and
connect the TabBox to the modifiers changed signal for checking if TabBox
should be ended.
The modalActionSwitch was used to disable all of KWin's actions during
Alt+Tab. This is not needed as Alt+Tab uses a keyboard grab and thus
no action will be triggered anyway.
Furthermore the functionality had been broken for years. The effects
use an own KActionCollection so their actions aren't considered and
neither the scripts.
Client used to have dedicated methods for different icon sizes instead
of combining all pixmaps into one QIcon. This resulted in various parts
of KWin having different access to the icons:
* effects only got one pixmap of size 32x32
* decorations only got the 16x16 and 32x32 pixmaps combined into a QIcon
* tabbox could request all icon sizes, but only as pixmap
Now all sizes are available in one QIcon allowing to easily access the
best fitting icon in a given UI.
Our back shortcut is registered as Alt+Shift+Backtab but our converted
Qt key coming into the test method is Alt+Shift+Tab. The logic so far
made this always fire for the normal Alt+Tab shortcut as at some point
the Shift modifier gets removed to do the test.
To handle it properly we first have to extract all the modifiers to just
get the key. If the key is Tab, we replace it with Backtab, combine it
with the extracted mods so it will be Alt+Shift+Backtab which matches
the registered shortcut.
The existing backtab solution can probably be removed and is clearly
wrong as it uses the keys as flags which they aren't.
There used to be an own action collection in KDE 3 times for the
block global shortcuts shortcut. But the code ws disabled and by
that I didn't see it during removing the global shortcuts blocking.
And it explains why the global shortcut blocking didn't work.
