Summary:
Because KWin is a very old project, we use three kinds of null pointer
literals: 0, NULL, and nullptr. Since C++11, it's recommended to use
nullptr keyword.
This change converts all usages of 0 and NULL literal to nullptr. Even
though it breaks git history, we need to do it in order to have consistent
code as well to ease code reviews (it's very tempting for some people to
add unrelated changes to their patches, e.g. converting NULL to nullptr).
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson, romangg
Reviewed By: #kwin, davidedmundson, romangg
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23618
Summary:
In some environemnts it is possible that udev detection of primary GPU
fails and it picks the first available card (normally card0). But it is
not desired, and it would be required to use different card (card1).
Introduce environment variable, which when used, will make it possible
to use different card node then one selected by udev.
You can use it like KWIN_DRM_DEVICE_NODE=/dev/dri/card1 kwin_wayland
Test Plan: Tested on the device where card0 was not usable for kms, but card1
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24051
We have lots of inconsistency at the moment in CMakeLists.txt files. Most
of it is due to kwin being a very old project. This change hopefully fixes
all of it.
Summary:
With nearest filter fractional scaling is blurry, always use linear filter
instead on Wayland.
Test Plan: Run Plasma session with patch and scale factor 1.9.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T10481
Differential Revision: https://phabricator.kde.org/D23986
Summary:
We repeat quite a lot of code that finds an output by xcb_window_t and
translates global X11 screen coordinates to output coordinates.
Test Plan: Compiles.
Reviewers: #kwin, gladhorn
Reviewed By: #kwin, gladhorn
Subscribers: gladhorn, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23947
Summary:
This patch further refines output management.
We go now through AbstractWaylandOutput virtual functions to enable and
disable outputs.
Dpms changes and enablement switches use separate code paths at start in the
Drm backend code since they are similar but not the directly same. Common code
is shared though, functions are renamed accordingly.
Asserts have been put in place to better understand and check the control
flow. A seemingly unnecessary call to DrmOutput::pageFlipped on reactivation
after Vt switch has been removed to allow for that.
In future patches we need to look additionally at the legacy mode switching
code path which was and is still not working and better handling of the
current monitor Dpms state. For example a monitor being switched off is not
properly acted on and the workspace still expanded.
Test Plan:
With one and two monitors:
* Dpms off/on
* Vt switches
* Screen disable/enable
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23600
Summary:
Make it more explicit what the relation is between Wayland and XDG objects
existing and enablement:
The ouput is enabled if and only if Wayland and XDG output objects exist.
We can simplify the code by replacing checks on the outputs with checking
the current enablement value.
Test Plan: Wayland nested and virtual backends.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23553
Summary:
This lifts the enablement code for outputs from the DRM backend to Platform
allowing other Wayland backends in the future to use this interface as well.
To do that we also create some helper functions on Platform level and have to
spill some KWayland classes into AbstractOutput what motivates a further split
of Platform into a Wayland child class like for AbstractOutput.
Test Plan: Disabled and enabled an output in DRM session.
Reviewers: #kwin
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23545
Summary:
Since we now use in the backends the OutputDeviceInterface for output data
all access must be complete before the Wayland server goes down. For that
introduce a new function to prepare shutdown in the backends.
While at it also remove the output deletion, since they get deleted through
Qt's object system leading to crashes on double free.
Test Plan: Shutdown works without seg faults in the Drm backend.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23602
Summary:
Switch to Q_ASSERT in order to make code a bit more consistent. We have
places where both assert and Q_ASSERT are used next to each other. Also,
distributions like Ubuntu don't strip away assert(), let's hope that
things are a bit different with Q_ASSERT.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: romangg, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23605
Summary:
KWin blits contents into a QImage raster buffer. Because of this we
don't need our underlying GL surface to be double buffered as it
effectively makes the whole thing tripple buffered.
Test Plan: Ran Aurorae, looked the same, should save some memory
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23331
Summary:
Aurorae has a timer between request update and updating the contents.
This makes some sense.
However on initial creation we want to snap the contents immediately as
otherwise we may be out by a frame between a new window being mapped and
the window decoration being rendered.
Test Plan:
Ran with Auroae
Windows opened immediately seemed to have a deco straight away
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23332
Summary:
With f013a4369c, cd6b69a4d2, d960be4b3f and edb200f6bc all possible
backends of a Wayland session have been ported to using the internal functions
of AbstractWaylandOutput's for managing outputs.
This removes the alternative code path used before in these backends, what
simplifies the code and is also a prerequisite to removing the Screens global
in the future.
Reviewers: #kwin, apol, zzag
Reviewed By: #kwin, apol, zzag
Subscribers: apol, kwin
Tags: #kwin
Maniphest Tasks: T11459, T11098
Differential Revision: https://phabricator.kde.org/D23485
Summary:
Get the physical size directly from the always available output device
interface instead of saving an additional copy in the abstract wayland
output class.
There is some ambiguity with orientation and naming that needs to be
cleaned up when output orientation is reworked.
Test Plan: Nested Wayland, Drm, virtual backends tested.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23496
Summary:
Get the pixel size directly from the always available output device
interface instead of saving an additional copy in the backends.
Test Plan: Nested Wayland, Drm, virtual backends tested.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23495
Summary:
Create output devices in virtual backend. For that the setVirtualOutputs call
can only come after the Wayland server has been initiliazied such that the
display exists to create the output and output device interfaces. Tests have
been adjusted for that.
Test Plan:
```
98% tests passed, 3 tests failed out of 148
Total Test time (real) = 362.97 sec
The following tests FAILED:
33 - kwin-testInternalWindow (Failed)
39 - kwin-testPointerInput (Failed)
101 - kwin-testMoveResize (Failed)
```
Failing of these tests looks unrelated to the change.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23477
Summary:
Since all Wayland session backends now use the same structure of
AbstractWaylandOutput we can create output devices like in the DRM backend.
First let us do this for Wayland nested sessions.
Test Plan: Manually with output-count 1 and 2. Outputs are correctly shown in KScreen.
Reviewers: #kwin
Subscribers: zzag, kwin
Tags: #kwin
Maniphest Tasks: T11140, T11459
Differential Revision: https://phabricator.kde.org/D23473
Summary:
With 1a11abc821 X11 standalone plugin uses the AbstractOutput interface for
managing its outputs. In there the refresh rate is stored in 1/μs.
Test Plan: currentRefreshRate() provides correct rate.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23265
Summary:
There is no point in using quint32 and casting back and forth in numerous places.
Fix a bunch of compiler warnings that we implicitly cast between signed and unsigned.
This makes things consistent with what we get from libinput.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: zzag, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23086
Summary:
This patch is a first take at splitting up of the Compositor class into
Wayland and X11 child classes.
In this first patch we mostly deal with setup and teardown procedures.
A future goal is to further differentiate the compositing part itself too.
Test Plan: Manually X from VT and Wayland nested. Autotests pass.
Reviewers: #kwin
Subscribers: sbergeron, anthonyfieroni, zzag, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D22195
Summary:
So far we were following a bit unique and rare doxygen comment style:
/**
* Contents of the comment.
**/
Doxygen comments with this style look balanced and neat, but many people
that contribute to KWin don't follow this style. Instead, they prefer
more traditional doxygen comment style, i.e.
/**
* Contents of the comment.
*/
Reviewing such changes has been a bit frustrating for me (so selfish!)
and for other contributors.
This change switches doxygen comment style in KWin to a more traditional
style. The main reason for doing this is to make code review process easier
for new contributors as well us.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22812
Summary:
Currently only SVG-based decoration themes react to border size changes.
QML-based decoration themes on the other hand, for example Plastik, don't
react to such changes, only new windows will have decorations with the
new border size.
BUG: 408035
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22665
Summary:
kwin(28512) QPainter::begin|QPainter::QPainter|KWin::Decoration::Renderer::renderToImage QPainter::begin: Paint device returned engine == 0, type: 3
kwin(28512) QPainter::setRenderHints|QPainter::setRenderHint|KWin::Decoration::Renderer::renderToImage QPainter::setRenderHint: Painter must be active to set rendering hints
kwin(28512) QPainter::setWindow|KWin::Decoration::Renderer::renderToImage|?KWinX11Platform.so? QPainter::setWindow: Painter not active
kwin(28512) QPainter::setClipRect|KWin::Decoration::Renderer::renderToImage|?KWinX11Platform.so? QPainter::setClipRect: Painter not active
Test Plan: seems to happen on startup, at least (when restarting kwin)
Reviewers: graesslin, zzag
Reviewed By: zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9014
Summary:
Currently code base of kwin can be viewed as two pieces. One is very
ancient, and the other one is more modern, which uses new C++ features.
The main problem with the ancient code is that it was written before
C++11 era. So, no override or final keywords, lambdas, etc.
Quite recently, KDE compiler settings were changed to show a warning if
a virtual method has missing override keyword. As you might have already
guessed, this fired back at us because of that ancient code. We had
about 500 new compiler warnings.
A "solution" was proposed to that problem - disable -Wno-suggest-override
and the other similar warning for clang. It's hard to call a solution
because those warnings are disabled not only for the old code, but also
for new. This is not what we want!
The main argument for not actually fixing the problem was that git
history will be screwed as well because of human factor. While good git
history is a very important thing, we should not go crazy about it and
block every change that somehow alters git history. git blame allows to
specify starting revision for a reason.
The other argument (human factor) can be easily solved by using tools
such as clang-tidy. clang-tidy is a clang-based linter for C++. It can
be used for various things, e.g. fixing coding style(e.g. add missing
braces to if statements, readability-braces-around-statements check),
or in our case add missing override keywords.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, apol, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22371
Summary:
Position and most importantly scaling will likely be the same on the next run,
This saves a flicker round at startup when scaling is different of 1 initialising the view at 1 then jumping at whatever the user requested.
Test Plan: Restarted my system several times
Reviewers: #kwin, #plasma, romangg
Reviewed By: #kwin, #plasma, romangg
Subscribers: davidedmundson, zzag, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22292
Summary: QColor::dark() and QColor::light() are obsolete since long time ago.
Reviewers: #kwin, apol
Reviewed By: apol
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22360
Summary:
QImage::byteCount() was deprecated in Qt 5.10. It is advised to use
QImage::sizeInBytes() method instead.
Reviewers: #kwin, apol
Reviewed By: apol
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22355
Summary:
QRegion::rects was deprecated in Qt 5.11. It is advised to use begin()
and end() methods instead.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22353
Summary:
To streamline Compositor code more remove the composite reset timer. The two
times it was used we can either use a singleshot timer instead or connect the
call to a different signal in the X11 backend.
Long term goal is to have a well structured init of the Compositor such that
we can call directly instead.
Test Plan: Manually in X and Wayland nested session.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D22270
Summary:
Font scaling is based on the screen scale factor so we can just return
dpi of 96.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22219
