The signals operate on AbstractClient nowadays, so we can have one
implementation for both Client and ShellClient.
Only X specific connections are only done for Client.
So far only moving through useractions menu is possible and only through
cursor control (mouse events are lost).
A basic first autotest is added to validate the moving of Windows.
The problem we had was closing a glxgears through an Aurorae theme
crashed KWin inside QtQuick.
This test case simulates the sequence:
1. starts glxgears
2. wait till we have a Client for it
3. send mouse move to guessed close button position
4. send mouse press/release at that position
5. verify the window is closed
6. verify glxgears exits
With the given commit reverted this crashes, with it in place it passes.
Please note: on CI it might fail as glxgears is not yet installed. [1]
Also we cannot enforce using Aurorae from the test yet, though on
the CI system it should get picked automatically as no other deco
plugin should be installed.
[1] Sysadmin ticket already created
If the size is the same it's basically just a window movement. That's
nothing we need to roundtrip to the client, but can adjust the geometry
change directly.
The quick tiling test is adjusted to test this together with
sendToScreen. Each window is also sent to the next screen to verify the
state doesn't change and geometry is updated.
Note: the flag for quick maximization seems to get lost in this setup.
Very basic: all screens have same size and are ordered from left to
right. It's mostly meant to allow easy test cases with multi-screen.
The quick tiling test demonstrates how it's used.
Last commit removed a setGeometry call that I thought was only used to clear an edge (which we don't want) but was in fact crucial to the next test.
REVIEW: 125635
This is needed to properly restore to a valid geometry after quick
maximizing. Note: this is not yet perfect, actually it should be done
after initial placing, which means we do need a manage method like
Client.
The autotest for quick tiling is extended to cover maximize changes
and cover this case.
Base test verifies the quick tile positions. No maximization or direct
state changes tested yet.
Required to have Toplevel and AbstractClient exported. Otherwise we
cannot use the SignalSpy.
Add action type to screen edge show to allow raise/lower as well as
autohide
Add an action type to screen edge show to allow raise/lower as well as
autohide. This uses the same atom, using a mask to separate type and
location.
The logic for handling geometry changes is moved from the screenedge to
the client so that we can handle both types without screenedge needing
to know what the raise is for.
REVIEW: 124272
As expected in a025791d7b the tests
fail on the CI system due to llvmpipe. Let's try whether enforcing
O2 makes them run, if not update to switch to Q is following.
If the surface indicates that it doesn't want keyboard focus we shouldn't
give it keyboard focus.
This was a problem with Kate's autocompletion tool tip windows.
REVIEW: 125553
This is the beginning of a new testing era for KWin: finally we are
able to test against a running KWin. This works by making use of the
new virtual framebuffer backend for Wayland. It starts a specific
Application subclass which is mostly a fork of ApplicationWayland.
The individual tests are able to influence the socket name and the
size of the virtual screen. This is supposed to be done in
initTestCase. To know when KWin is fully started one can use the
workspaceCreated signal of KWin::Application. KWin is not started in
another process, but the kwin library is used, so the test has pretty
much full introspection to everything going on inside KWin. It can
access the Workspace, WaylandServer, fake input events through
InputRedirection and so on.
Once the test KWin is running it's possible to connect to it using
KWayland::Client library. This allows to introspect the Workspace
to see whether all worked as expected (e.g. correct stacking order,
active window and so on).
This first autotest is mostly meant to illustrate how to setup a
test and how one can use KWayland::Client to interact with the mock
KWin. For more tests it is suggested to move the connections to the
Wayland server in the init() and cleanup() methods.
The change also affects the qpa plugin: the specific check to only
run in binaries called kwin_wayland doesn't hold any more. This can
now be overwritten by an env variable.
Please note that this first test will probably fail in the CI system
as it might not have XWayland which is needed by KWin.
With Qt 5.5 the physicalSize of a screen is broken if the X system does
not provide the XRandR extension. This caused our screen edge test to
fail on the CI system (Xvfb) due to approach window being based on the
dpi.
The problem itself is addressed for Qt in:
https://codereview.qt-project.org/126808
This change just worksaround till the change has made it into our CI
system (at which point the expected fails will break).
Reviewed-By: David Edmundson
The test put a reference to the XCB::Window as data
to the _net_wm_transient property, not the window ID
This "works" (you get various garbage transients for
the leader in addition) as long as the window id itself
is the first item in the structure (because that is what
the test resolves to verify what it has done) bug fails
when the XCB::Window structure changes and anything
is the first item (or, btw., when the compiler feels
to re-align the structure and adds some padding...)
So let's fix the test by at least passing the proper
data reference.
is FIXED-IN: 5.4.1
REVIEW: 124888
also see REVIEW: 124864
# The first commit's message is:
do not switch desktop on resizing windows
REVIEW: 123599
# The 2nd commit message will be skipped:
# fix screenedge flipping merge
KWin::connection() uses the property to resolve the value instead of
using QX11Info. In practice this doesn't change anything at the moment,
but allows kwin_wayland to provide an xcb connection without depending
on QX11Info.
As we cannot make xcb_connection_t* available as a metatype, the
property's type is set to void*.
KWin::rootWindow() uses the property to resolve the value instead of
using QX11Info. In practice this doesn't change anything at the moment,
but allows kwin_wayland to provide a root window without depending on
QX11Info.
KGlobalAccel sets the timestamp as a property and we need to set our
x11Time to it otherwise following keyboard grabs might fail.
Requires 61e2a156678eef033b2629f7c72530dc78d7c3ac in kglobalaccel.
A wrapper class for MotifHints is added to xcbutils. This class manages
the information about the read Motif hints, so that Client doesn't need
to have a copy of the read states.
The class is designed in a way that during Client::manage we get rid of
another roundtrip.
REVIEW: 122378
It's a convenient class to encapsulate the ICCCM WM_SIZE_HINT.
Instead of exposing just the properties it provides accessors for
the interesting parts and applies sanity checks.
The test is flaky during the wait for Xephyr. Giving it more time should
hopefully make it more reliable.
The better way would be to switch to the command line argument
-displayfd pipeFd
unfortunately the Xephyr on the CI system does not yet support this
command line argument.
