Completing the task of replacing all NULL to nullptr in all the files in
libkwineffects folder.
(also substituting some "0" used as nullptr with nullptr)
REVIEW: 114823
* "" needs to be wrapped in QStringLiteral
* QString::fromUtf8 needed for const char* and QByteArray
* QByteArray::constData() needed to get to the const char*
Assume that the default framebuffer has the same dimensions as the screen.
By not quering the dimensions of the viewport we don't risk serialization
in drivers that use threaded dispatch.
This reduces the size of the geometry that needs to be uploaded by
one-third, and allows kwin to take advantage of the post-transform
cache in the GPU.
Expose bindArrays(), unbindArrays() and add a draw() method that takes
an offset and a count. This makes it possible to upload geometry, call
bindArrays(), and then call draw() multiple times to draw different
subsets of the uploaded geometry.
KWin always updates the array buffer binding before it calls GL functions
that reference it, so there is never any need to reset it.
This should eliminate half the calls to glBindBuffer() while painting
the scene.
These methods make it possible to write directly into the buffer object
when building vertex arrays.
If the buffer object cannot be mapped, the map() method will return
a pointer to local memory which will be submitted to the buffer object
with glBufferData() when unmap() is called.
This overload makes it possible to upload data of an arbitrary size and
type into the buffer object. The intent is for this method to be used
to upload interleaved vertex data.
This commit also adds setVertexCount() and setAttribLayout().
The rationale for decoupling attribute specification from data uploading
is that the attribute formats and layout change less frequently than
the vertex data.
The vertex count is also specified using a separate function to enable
the caller to upload data for multiple draw calls at the same time.
Store the formats as an array in GLVertexBufferPrivate.
This simplifies the code for enabling the generic vertex arrays,
and also makes it easier to add new arrays.
Consolidate the code for binding and unbinding the vertex arrays into
two new methods called bindArrays() and unbindArrays() respectively.
This patch also removes the three paint implementations, since the only
difference between them is the code that sets up the arrays. The actual
painting code is moved into GLVertexBuffer::render(), which uses the
new methods to bind and unbind the arrays.
In case OpenGL ES 3 is provided by the driver we can use the GLSL 1.40
shaders as GLSL 300 ES shaders. The #version declarative is rewritten in
such a case.
REVIEW: 110590
Allocate enough space to hold the geometry for multiple draw calls,
and use glMapBufferRange() to gradually fill the buffer. Once the
data store is full, it's orphaned and a new one is allocated.
Store the vertex positions and texture coordinates in the same buffer
object. This saves one buffer allocation in every setData() call.
The attributes are also interleaved as they are uploaded into the buffer
to maximize locality of reference.
This patch adds a link() function, along with bindAttributeLocation()
and bindFragDataLocation().
These functions must be called after creating the program, but before
linking it.
A new ExplicitLinking flag must be passed to the constructor to prevent
automatic linking. This is to keep existing code working without
modifications.
Use glGetStringi() to list the extensions when the GL version is 3.0
or greater. glGetString() does not accept the GL_EXTENSIONS token
in an OpenGL core context.
Add an option to kcmcompositing in the 'Advanced' tab, to enable or
disable color correction. It is specified that it's experimental and it
needs Kolor Manager.
Before painting for a particular screen, ColorCorrection::setupForOutput
should be called.
A screen property is added for WindowPaintData.
In kwinglutils, The fragment shaders are intercepted before being
compiled and they get a couple of lines of code inserted in order to do
the color correction. This happens only when color correction is enabled, of
course.
For D-Bus communication with KolorServer, everything is async.
The implementation basically manages a set of color lookup tables for
different outputs and for different window regions. These are taken via
D-Bus. Each lookup table has around 700 KB.
This commit reintroduces the changes from the former merge with the
"color2" branch. In this form, it can be easily reverted.
REVIEW: 106141
This was originally added by d467fc1bdbcf69bd6ef213bd909633c2edfb6878,
to prevent alpha ending up to be 0 with blending disabled. Apparently,
that was a driver issue that is no longer present.
REVIEW: 107090
This merge is incomplete and it does not include the review number of
the associated review request. It should have been pushed as a single
commit, because the merged commits were not intended to be published in
their form.
This reverts commit dcba90263069a221a5489b1915c5cf1ca39d090c, reversing
changes made to 50ae07525c7fde07794e7548c3d6e5a69cb1a89d.
Conflicts:
kwin/scene_opengl.cpp
kwin/scene_opengl.h
If the build option is enabled KWIN_HAVE_OPENGL_1 is passed as a compile
flag when build against OpenGL.
This compile flag is meant to replace the KWIN_HAVE_OPENGLES. So far code
has been ifdefed for special behavior of OpenGL ES 2.0 and to remove
fixed functionality calls which are not available in OpenGL ES 2.0.
With this build flag the fixed functionality calls which are only used in
the OpenGL1 Compositor can be removed and keeping the KWIN_HAVE_OPENGLES
for the real differences between OpenGL 2.x and OpenGL ES 2.0.
E.g. a call like glColor4f should be in an
glColor4f(1.0, 1.0, 1.0, 1.0);
while a call like glPolygonMode should be in an
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
Building for OpenGL ES 2.0 of course implies that KWIN_HAVE_OPENGL_1 is
not defined.
The Egl backend is decoupled from the OpenGL ES build option which makes
it possible to use it as a replacement for glx.
To make this possible a new build flag is added when egl is available at
compile time and any egl specific code is now ifdefed with this flag
instead of the gles flag. In addition at runtime a windowing system enum
value is passed to the various detect methods to have egl/glx specific
detection for e.g. function pointer resolving.
By default egl is used if compiled with OpenGL ES, otherwise glx is used.
But in the non-gles case the windowing system can be selected through the
new environment variable KWIN_OPENGL_INTERFACE. Setting this variable to
"egl" the EglOnXBackend is used.
REVIEW: 106632
Results in cleaner changes.
Put all the color correction stuff from SceneOpenGL in SceneOpenGL2.
Conflicts:
kwin/eglonxbackend.cpp
kwin/glxbackend.cpp
kwin/scene.h
kwin/scene_opengl.cpp
kwin/scene_opengl.h
SceneOpenGL turns into an abstract class with two concrete subclasses:
* SceneOpenGL1
* SceneOpenGL2
It provides a factory method which first creates either the GLX or EGL
backend which is passed to a static supported() method in the concrete
sub classes. These method can test whether the backend is sufficient to
be used for the OpenGL version in question. E.g. the OpenGL 2 scene
checks whether the context is direct.
The actual rendering is moved into the subclasses with specific OpenGL 1
and OpenGL 2 code. This should make the code more readable and requires
less checks whether a Shader is bound. This is now known through the
Scene: the OpenGL1 scene will never have a shader bound, the OpenGL2 scene
will always have a shader bound.
To make this more reliable the ShaderManager is extended by a disable
method used by SceneOpenGL1 to ensure that the ShaderManager will never
be used. This also obsoletes the need to read the KWin configuration
whether legacy GL is enabled. The check is moved into the supported
method of the OpenGL2 scene.
REVIEW: 106357
The implementation consists of a class in libkwineffects.
There are some slight modifications in the compositor. Regions for
different outputs are drawn at different times.
Currently only per output color correction is implemented. However, the
grounds are prepared for implementing per window color correction
easily.
The ColorCorrection class needs to communicate via D-Bus with a KDED
module, KolorServer, which is a part of KolorManager.
The only visible part for the user consists of a check box in the
advanced tab for the compositing KCM.
The actual correction is done by injecting a piece of code in the
fragment shader, code that does a 3D lookup into a special color lookup
texture. The data for these textures is obtained from KolorServer. All
D-Bus calls are async.
