Summary:
QPainter doesn't render decoration shadows. It renders only
shadows provided through ShadowInterface.
With this change, painting of shadows is done in similar way OpenGL backend is
currently doing.
Before
{F5734867, layout=center, size=full}
After
{F5734870, layout=center, size=full}
Depends on D10811 (dummy decoration with shadows in autotests)
Test Plan:
* start kwin with QPainter backend enabled:
```
KWIN_COMPOSE=Q kwin_wayland --xwayland --windowed
```
* open konsole and kate:
```
DISPLAY=:1 konsole
DISPLAY=:1 kate
```
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: davidedmundson
Subscribers: abetts, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10943
Summary:
This problem appears if shadow corner tiles are too big and
some window has size smaller than 2 * shadowTileSize.
This change tries to address the problem above by exclusing
overlapping tile parts. If there are any two overlapping corners
then tile between them(top/right/bottom/left) is not rendered.
Also, because some corner tile parts can be excluded, corner tiles
are expected to be symmetrical(i.e. if we remove right half from
the top-left tile and left half from the top-right tile and
stick them together, they still look fine, there are no misalignments, etc).
Most shadows(e.g. shadows from Breeze) have such behaviour.
No tiles are overlapping
{F5728514, layout=center, size=full}
Overlapping tiles
{F5728516, layout=center, size=full}
And this is how it supposed to be
{F5728517, layout=center, size=full}
Test Plan:
* apply D11069 to Breeze
* in System Settings/Application Style/Window Decorations, choose "Very Large" shadow size
* open Konsole
* resize it to a minimum possible size
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, ngraham, anemeth, abetts, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10811
Summary:
The drm platform has a special handling for touch events while the
screen is in dpms. All touch events are filtered out, but a double
tap wakes up the screen.
Due to the filtering out of the events the idle timers were not reset.
So if you only double tapped, the screen turned on, but not off again.
This change updates the timestamp after double tap, so that the idle
timers are restarted. All other events are still filtered out, to not
have "fake" events (e.g. smart phone in pocket) wake up the device.
BUG: 392754
FIXED-IN: 5.12.6
Test Plan: only compile tested
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12668
Summary:
Changing the creation of the nested window from unstable v5 to v6 in
order to be supported on more compositors and to use KWin's better
supported platform.
Targeting 5.12 as this will help to remove support for unstable v5
from KWayland.
Test Plan: Run a nested KWin/Wayland on KWin/Wayland, everything looked fine
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11806
Test Plan:
Very minimal expansion of unit tests which uses WaylandScreens
Wrote mini app to debug actual output of xdg-output for testing the DRM code
Main relevant user of this is xwayland > 1.20 which I don't have, so that
part remains untested
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: romangg, graesslin, bshah, kwin
Tags: #kwin
Maniphest Tasks: T8501
Differential Revision: https://phabricator.kde.org/D12243
Summary: TTYs are only available for seat0, so when starting a framebuffer kwin on seat1, it never draws, because drawing is always suspended, because it is being treated as not active
Test Plan: The framebuffer backend draws on seat1, and /dev/fb1 and when I switch back to my Weston greeter, (when it's also using the frame buffer,) it doesn't try to draw on top of it.
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: davidedmundson, rkflx, graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9574
Summary: The warning that the format is unknown was being logged unconditionally
Reviewers: #kwin, bshah
Reviewed By: #kwin, bshah
Subscribers: rkflx, graesslin, cfeck, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9567
Summary:
Qt objects are treated as identities so remove the copy constructor and
an assignment operator. See, http://doc.qt.io/qt-5/object.html#identity-vs-value
IIRC some Qt objects(like QImage) have copy constructor for implicit data sharing,
but VirtualOutput doesn't have anything to share.
Also, it [this patch] fixes a compiler warning:
```
/home/vlad/KDE/src/kde/workspace/kwin/plugins/platforms/virtual/virtual_output.cpp: In copy constructor ‘KWin::VirtualOutput::VirtualOutput(const KWin::VirtualOutput&)’:
/home/vlad/KDE/src/kde/workspace/kwin/plugins/platforms/virtual/virtual_output.cpp:30:1: warning: base class ‘class QObject’ should be explicitly initialized in the copy constructor [-Wextra]
VirtualOutput::VirtualOutput(const VirtualOutput &o)
^~~~~~~~~~~~~
```
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: michaelh, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12214
Do not blindly select first EGL config from returned list, but choose the one that matches GBM surfaces, that will be created later.
GBM surfaces are created with GBM_FORMAT_XRGB8888 format, so choose the config that matches it.
With wrong format EglGbmBackend::resetOutput() will later fail with error EGL_BAD_MATCH.
Test Plan: Compile, run startplasmacompositor. Verify that OpenGL compositing is used, either by kwin debug console, or by kwin support information.
Reviewers: graesslin, davidedmundson, #kwin, #plasma_on_wayland, bshah
Reviewed By: davidedmundson
Subscribers: zzag, kwin, #kwin
Tags: #kwin, #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D11758
Summary:
Do not blindly select first EGL config from returned list, but choose the one that matches GBM surfaces, that will be created later.
GBM surfaces are created with GBM_FORMAT_XRGB8888 format, so choose the config that matches it.
With wrong format EglGbmBackend::resetOutput() will later fail with error EGL_BAD_MATCH.
Test Plan: Compile, run startplasmacompositor. Verify that OpenGL compositing is used, either by kwin debug console, or by kwin support information.
Reviewers: graesslin, davidedmundson, #kwin, #plasma_on_wayland, bshah
Reviewed By: davidedmundson
Subscribers: zzag, kwin, #kwin
Tags: #kwin, #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D11758
Summary:
This patch implements using EGL_IMG_context_priority to request
high-priority rendering contexts if the extension is available.
EGL_IMG_context_priority is currently used in this fashion by
e.g. Android's SurfaceFlinger (RenderEngine.cpp) and libweston
(gl-renderer.c) and seems promising given this widespread
acceptance.
Reviewers: #kwin, graesslin, romangg, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11572
Summary:
Implements a KWayland protocol to pass GBM fd from KWin to KRfb and
addictions to relevant projects from both sides.
Note that this patch does not affect default behaviour of mentioned projects. It can be used
only with KWIN_REMOTE=1 in env from KWin side and with preferredFrameBufferPlugin=gbm in krfbrc from
KRfb side. In all other aspects app behaviour remains unchanged.
Test Plan: Launched KWin in Wayland mode, launched KRfb in it, launched KRDC on a laptop, connected in read-only mode, observed a correctly retrieved desktop with Krfb window
Reviewers: graesslin, davidedmundson, romangg, #kwin
Reviewed By: davidedmundson, romangg, #kwin
Subscribers: kossebau, jgrulich, romangg, ngraham, alexeymin, aacid, kwin, #kwin, davidedmundson, plasma-devel
Tags: #plasma_on_wayland, #kwin
Maniphest Tasks: T5653, T7785
Differential Revision: https://phabricator.kde.org/D1230
Summary:
Since VirtualOutput is a QObject, store it per reference and not per value.
Also fix some compilation warnings.
Test Plan: Before and after 92% tests passed.
Reviewers: #kwin, davidedmundson
Reviewed By: davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11581
Summary:
This matches the DRM backend more closely and allows mid-test removal and
addition of virtual outputs with different properties in the future.
Test Plan: Before and after 93% tests passed.
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11351
Summary:
some drivers, like Mali have EGL_KHR_platform_gbm
but not EGL_MESA_platform_gbm
Test Plan: pending a test on rock64 board
Reviewers: #kwin, #plasma, davidedmundson, graesslin
Reviewed By: #kwin, #plasma, graesslin
Subscribers: graesslin, garg, davidedmundson, plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10346
Summary:
The support for interactive point selection was missing. This results in
the ColorPicker dbus API always returning an error on X11. We either need
to disable the ColorPicker on X11 or add support for this functionality.
As the X11 platform basically supports selecting a point in the
interactive window selection it makes more sense to add this missing
method in the platform than to disable support of color picker effect.
BUG: 387720
FIXED-IN: 5.12.1
Test Plan:
Run KWin/X11 on Xephyr and was able to pick a color and
kill a window
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10302
Summary:
The main reason for not having it as a mandatory dependency was that BSD
doesn't support it. But as I learned recently it is available on our CI
system. So BSDs have support now.
Even more it showed that the code doesn't compile if the dependency is
missing. And there's one thing I hate: broken build configuration
options.
So let's make UDEV and libinput a required dependency and get rid of the
problems.
Test Plan: Compiles
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10057
Summary:
While investigating BUG 387313 I noticed that blending might be disabled
for subsurfaces. Blending was disabled before rendering the subsurfaces
and it is not checked whether the surfaces have an alpha channel or not.
This change addresses this problem by disabling blending after all
subsurfaces have been rendered and enabling blending if a subsurface has
an alpha channel.
Unfortunately this does not fix the investigated bug.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10060
Summary:
x and y are always relative to the parent, adding parent.width to
calculate the position doesn't make sense.
Original author meant just "x: parent.width-1"
But we may as well just use anchors. Programatically it comes out the
same.
Test Plan:
No more weird vertical lines in the KCM when view is slightly less than 2 previews wide.
Modded colour to hardcoded "red" for easier visualisation, checked it looked ok when set as a real deco.
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9776
Summary:
This change finds the screen for a touch screen device based on:
* number available screens
* output name defined on the touch screen device
* internal screen
* and physical size
The id of the screen is stored in the Device allowing to adjust the
touch points accordingly. This means instead of transferring to the
combined display size the touch points are transferred into the output
space and the position of the output is added. Thus in a multi screen
system the touch points are properly mapped to the output.
Furthermore the screen orientation is passed to the Device and a
calibration matrix is set accordingly. Thus a transformed screen has the
touch screen transformed accordingly.
Please note that this only affects libinput on Wayland and not on X11!
The x11 standalone platform needs to gain similar code.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8748
With Wayland KWin needs to provide certain services, which were provided
before that by the Xserver. One of these is gamma correction, which includes
the - by many people beloved - functionality to reduce the blue light at
nighttime. This patch provides the KWin part of that. It is self contained,
but in the end will work in tandem with a lib in Plasma Workspace and a KCM
in Plasma Desktop, which can be used to configure Night Color.
* Three modi:
** Automatic: The location and sun timings are determined automatically
(location data updates will be provided by the workspace)
** Location: The sun timings are determined by fixed location data
** Timings: The sun timings are set manually by the user
* Color temperature value changes are smoothly applied:
** Configuration changes, which lead to other current values are changed
in a quick way over a few seconds
** Changes on sunrise and sunset are applied slowly over the course of few
minutes till several hours depending on the configuration
* The current color value is set immediately at startup or after suspend
phases and VT switches. There is no flickering.
* All configuration is done via a DBus interface, changed values are tested
on correctness and applied atomically
* Self contained mechanism, speaks directly to the hardware by setting the
gamma ramps on the CRTC
* Currently working on DRM backend, extensible to other platform backends in
the future
* The code is written in a way to make the classes later easily extendable to
also provide normal color correction, as it's currently done by KGamma on X
Test Plan:
Manually with the workspace parts and added integration tests in KWin using
the virtual backend.
BUG:371494
Reviewers: #kwin, graesslin
Subscribers: kwin, plasma-devel, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5928
Summary:
KWin was quite good in ensuring that you don't need to install by
passing paths to the tests. The new way is much nicer, so code is
adjusted for the new way. Also if we require a newer ECM in future we
need to support the new way.
No guarantee that the tests don't pick something up from the system env,
that needs more testing.
References: https://community.kde.org/Guidelines_and_HOWTOs/Making_apps_run_uninstalled
Test Plan: The tests which loaded helpers pass
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7543
Summary:
The addition of the test infrastructure is motivated by the regressions
caused by adding mode switching and transformation support.
A contributing factor to these regression is the fact that the DRM
platform does not have any tests. It is difficult to test this code as
it needs to work with hardware, thus we cannot use the real DRM library.
Instead we need to use mocking.
This change sets up some first basic tests with the help of a mockDrm
library. In order to better test the code as units the Drm classes are
slightly refactored. Most importantly the dependency to DrmBackend is
removed wherever possible and replaced by a simple int fd which is mostly
the only element used by the classes.
This first test introduces basic testing of a DrmObject. It is intended
to extend this to at least also test DrmPlane as a central piece of our
Drm platform plugin. This will also extend the tests of DrmObject.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8776
Summary:
We need to keep the DrmOutput object to still have the
WaylandOutputDevice.
Screens currently start off enabled as before.
In order to keep KWin to have a correct index based list of screens we
need to store a second vector of currently enabled outputs for the
screens interface.
Test Plan:
Had dual screens.
Disabled/Enabled each one through the kscreen KCM
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: ngraham, luebking, broulik, graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8796
Mesa's glXChooseFBConfig will not return any sRGB capable fbconfig when it
is not explicitly asked for. On some systems, the only ARGB32 visual is
paired with an sRGB capable fbconfig, so application windows using ARGB32
visuals would fail to display.
BUG: 387159
FIXED-IN: 5.11.4
Summary:
This is a tiny refactor so that DrmOutput can have WaylandOutput
dynamically
deleted and recreated at runtime as we disable outptuts.
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8794
Summary:
con->setOutput and crtc->setOutput is called in Output::~Output so this
is doing it twice redundantly.
More importantly Output::~Output calls crtc->blank(), which means we
need a valid CRTC object there.
Test Plan: Compiles
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: bshah, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8779
Summary:
The AMS code accesses elements in a vector which might not be valid. This
change refactors the code to be more robust, especially the DrmPlane,
which started to crash after adding transformation support.
BUG: 386490
Reviewers: #kwin, #plasma, fvogt, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8752
Summary:
This change introduces an OrientationSensor class which wraps a
QOrientationSensor. The OrientationSensor is hold by Screens and gets
enabled if Screens knows about an internal (e.g. LVDS) display which
supports rotation. In addition the OrientationSensor holds an KSni to
enable/disable the automatic rotation support.
The drm platform plugin is adjusted to make use of the OrientationSensor.
The API is defined in a way that this can also be implemented on other
platforms supporting rotation. Most important are hwcomposer and X11
standalone. The latter should be straight forward as rotation is provided
through XRandR. The former needs addition for rotation support first.
Test Plan: Rotated my Yoga 12
Reviewers: #kwin, #plasma, sebas
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8699
Summary:
The idea behind getting the supported transformations is to tell KScreen
which transformations are actually supported and thus not even allow the
user select a setting which is not supported.
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8645
Summary:
While KWin gained support for changing modes it did not yet forward it
to the Wayland OutputInterface. This change implements this missing todo
by finding the matching mode and marking it as current.
Test Plan: Run kinfocenter to verify the current mode is properly set.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8578
Summary: Mostly so DRM can report if it has AMS or not
Test Plan:
Ran on my DRM setup, printed debug.
Spawned nested compositor, printed debug on that
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8702
Summary:
This change fixes the hotspot calculation by introducing a dedicated
matrix to map the hotspot.
To better test the hotspot a small test application is added. The app
renders a red point at the cursor position and uses a cross for cursor
with the hotspot position being transparent. So if KWin renders the
cursor at the correct position a red point is visible in the center of
the cross. The test app supports several cursor hotspot positions:
* center (default)
* top left
* top right
* bottom right
* bottom left
To switch between the variants press the space key.
Test Plan:
Rotated screen, used test app to verify the hotspot is
correct. Also scaled display, still correct
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8668
Summary:
So far all outputs shared the same dumb buffer for the cursor image.
This doesn't work any more when screen rotation is enabled. For rotated
screens the cursor image per output is different. On some it might be
rotated, on some not.
To solve this problem the dumb buffers are moved from the DrmBackend to
the DrmOutput. The DrmOutput now creates the cursor images itself and
can rotate them if needed. Thus we get nicely transformed cursors.
Test Plan: Rotated screens, moved cursor around, image properly rotated
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8664
Summary:
This is meant to address Bug 372114. The problem here is that the KConfig
object (and its derivatives), that the freeze detection thread needs to
record the freeze, are not thread safe. When it happens that the main
thread is in fact not frozen, it is possible that the two stomp on each
other's KConfig object.
The solution applied here is to use the KSharedConfig::openConfig
function, which is thread safe, on the freeze detection thread. As was
mentioned by Martin Flöser in the discussion, the thread needs to obey
the name of the main config file of KWin, which can change in the future.
As a secondary issue, this patch also turns off KCrash reporting for
aborts due to a freeze being detected. IMO it is not very user friendly
to still show a crash report to the user, even after this bug is fixed,
for the deliberate SIGABRT. Maybe a less intrusive notification could be
used to tell the user why effects are suddenly disabled?
I've been using kwin with this change for several weeks now and it makes
the restarts of kwin due to freezes unobtrusive. However, most (I would
say almost all) of these freezes are actually instances where the system
is being slow after eg. screen resolution is changed.
BUG: 372114
FIXED-IN: 5.11.3
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: ngraham, graesslin, anthonyfieroni, cfeck, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8356
Summary:
This change refactors the way how the cursor position on a screen is
calculated. It is changed to a matrix multiplication with the
adjustments for the rotated screen just being additional steps added to
the matrix.
With this calculation I got correct positions for all variants of
scaled, rotated and differently positioned outputs.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8627
Summary:
When KWin successfully presents a new mode, it stores the current state
as the last working mode. If a new modeset is requested and the atomic
test fails, all is undone and reverted to this last knowing mode.
Currently included are:
* the mode
* global position
* transformation
This is only done on a modeset not when going to DPMS.
Test Plan:
Selected the not working vertical rotation and nothing bad
happened.
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8602
Summary:
This change hooks up the drm plane rotate with the rotation requests
from KScreen. Our requests support more than what KScreen exposes in the
UI, that is all the flipped variants. I do not really understand what
the flip means, so this is not implemented yet.
Furthermore this only implements the visual rotation and not the input
rotation. This means mouse movement and touch input is currently broken
on a rotated screen.
Please note that the hardware I used seems to not support the vertical
rotation. I'm not sure whether my code works. On my system it just
results in atomic commit errors and we need to go back to a previous
working state. This is not yet implemented. I need to test the vertical
rotation on my notebook, which should (in theory) support it.
Reviewers: #kwin, #plasma, subdiff, sebas
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8594
Summary:
A preparation step to support rotation of outputs. The idea is to rotate
using DRM directly and not add it to the compositors. With this change
and a small hack to try it, I was able to rotate the screen.
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8582
Summary:
Under wayland we support high DPI putting by putting a separation
between the logical co-ordinate system and the resolution of rendered
assets.
When a window is on a high DPI screen, we should render at the higher
resolution.
Like the window scaling this handles any combination of a 2x scaled
decoration being rendered on a 1x screen or vice versa.
---
This patch is a bit different from the other scaling stuff. We have to
generate the quads *before* we have an updated texture with the new
scale. This means the scale isn't attached to the buffer like elsewhere.
That's why I added a property in TopLevel so there's still one canonical
source and things can't get out of sync.
BUG: 384765
Test Plan:
Crystal clear breeze and oxygen decos on my @2x display
Drag windows to attached @1x display, things still look OK when across 2
screens
Changing the scale of a screen updated the decos instantly
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8600
Summary:
For software QtQuick rendering we want to create a pixmap buffer and
render our contents in there.
m_rendercontrol->grab does this, but also covers the GL side in pretty
much the same way that we were currently doing.
In doing so I found a bug in Qt, that's submitted upstream, and also worked round.
Test Plan:
Tested with forced software mode, could see an Aurorae decorations
Tested without (so normal code), could see an Aurorae decorations
Tested wayland on nvidia with software rendering, didn't freeze
Whether we then end up using GL, painter or xrender rendering is irrelevant
(but I tested two of them anyway)
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, apol, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8039
Summary:
- Actually use double layered compositing, previously both layers were
of type HWC_FRAMEBUFFER, instead of 2nd layer being
HWC_FRAMEBUFFER_TARGET. Thanks to @NotKit on telegram for pointing this
out.
- Use sourceCropf instead of sourceCrop, as sourceCrop is legacy option.
Test Plan: have to test on actual device, but test_hwcomposer does have similar code.
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8587
Summary:
This change hooks up the bits for changing the mode when a request to
change mode from kscreen is received. This includes:
* setting new mode in DrmOutput
* creating new buffers in SceneQPainter backend
* creating new GbmSurface in SceneOpenGL backend
Room for improvement:
* detect whether the new mode works and go back to old one if it fails
Test Plan:
Started both a QPainter/OpenGL session. Used kcmshell5 kscreen
to modify the resolution. Saw that it got applied, maximized a window to
verify it's correct. Changed back to original resolution. Verified it looked
good by maximizing a window.
Reviewers: #kwin, #plasma, subdiff, sebas
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8398
Summary:
Under wayland we support high DPI putting by putting a separation
between the logical co-ordinate system and the resolution of rendered
assets.
I didn't include window decorations in the previous wayland scaling
patchset. They were drawn them at a standard resolution, which is
implicitly scaled up.
This uses the Qt scaling, meaning oxygen and breeze (and others) get
perfect high DPI support with zero client changes.
Like the window scaling this handles any combination of a 2x scaled
decoration being rendered on a 1x screen or vice versa.
CCBUG: 384765
Test Plan:
export KWIN_COMPOSE=Q
Had two screens of different scales
It was the right size on both (as before)
Was super-sharp on the fancy screen
Reviewers: #plasma, hetzenecker, graesslin
Reviewed By: #plasma, graesslin
Subscribers: ngraham, graesslin, plasma-devel, kwin, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8504
Summary:
We want to translate by the monitor position, so that needs to be
the negative of the position.
But Kwin/KScreen treats 0 as the top of all monitors. GL treats 0 as
bottom, so that all needs inverting.
Hence this should be a positive y value for the viewport.
BUG: 386099
BUG: 385655
Test Plan:
Had two monitors
Side by side was - fine
Stacked vertically - still fine
Modded X code to extend in y instead of x.
3 monitors worked fine.
Nested wayland only seems to support one screen?
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8479
Summary:
there is no need for createOutput to be static, make it non-static,
this also fixes the build failure introduced in commit
02d3daf28a.
Test Plan: builds
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8430
Summary:
On Wayland we have the sync disabled as it doesn't work properly. This
allows us to also move the sync event handling into the X11 standalone
platform.
The code is slightly refactored: instead of passing the event to each
Client, we search for the matching Client. For that the SyncAlaram struct
is added to public section of Client. The method to handle the sync
doesn't need the event any more and is moved from events.cpp to
client.cpp.
Test Plan:
Run Xephyr+kwin_x11, resized a window and verified through
gdb breakpoint that the sync still works
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D7942
Summary:
With the new try of all compositor types supported there is an automatic
fallback from OpenGL to XRender/QPainter in case OpenGL setup failed.
So there is no need to invoke a method to do just that.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8364
Summary:
The test DontCrashUseractionsMenu (Waylandonly) found an issue in our
screen handling implementation in the QPA. The code exposed a short time
frame between the dummy screen getting destroyed and the first screen
being added. This could result in a crash of KWin.
There is actually no need to implement Screen on top of Wayland screen.
KWin has all the knowledge, so we can also base this on top of the
Screens API.
Advantages:
* no delays due to Wayland roundtrips
* handle screen getting removed (was a TODO)
* handle resolution changes (was a TODO)
The new implementation has a disadvantage that it destroys and readds
all screens whenever something around the screen changes. This shouldn't
be an issue in practice as it's only for the internal QPA and thus only
affects KWin internal windows which is placed in global coordinates
anyway. If it turns out to be a problem we need to track better the
screen changes - so far those were not tracked at all.
Test Plan: Run a few unit tests which change screens
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8345
Summary:
Allows to share the implementation in a better way and is a requirement
to get the Screen implementation in the QPA plugin to be based on
KWin::Screens instead of KWayland::Output.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8344
Summary:
So far KWin does not know which Compositors the platform actually
supports. This results in KWin happily trying to use the OpenGL
compositor on fbdev or the QPainter compositor on hwcomposer although
that is obviously going to fail as the platform doesn't support this.
By adding a pure virtual method all Platforms can define what they
support. In a later step the Compositor can use this to create an
appropriate scene and also perform proper fallback handling in case the
scene creation fails.
Test Plan: Compiles
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8316
Summary:
The Platform API is extended by a call to create the EffectsHandler. In
X11 standalone Platform a new EffectsHandlerImplX11 is added which
contains the X11 only parts of the EffectsHandler, such as grabbing the
X keyboard and the X11 mouse interception window.
The EffectsHandlerImpl gains some virtual methods for the parts which
are now done in the X11 specific implementation. In return we get rid of
lots of if-else structures checking for the operation mode.
Test Plan: Only compile tested.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7955
Summary:
In 47343fb we made GBM buffer shared.
What we wanted to do was:
Unbox the shared_pointer<GBMSurface> to give us a GBMSurface* object
Call the gbm_surface*() on that operator
Then cast that to a void* for eglCreatePlatformWindowSurfaceEXT
What we did:
Cast the std::shared_ptr<GBMSurface> to a gbm_surface* then cast that
to void*.
This is just a garbage value and it crashes in Mesa when we do our first
paint.
I've replaced that with an explicit method then we can use shared_ptr's
-> operator rather than get() which does the right thing in a readable
way.
Test Plan:
It crashed after rebasing to master (for Aleix too)
No longer crashes
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8251
Summary:
In 47343fb we made GBM buffer shared.
What we wanted to do was:
Unbox the shared_pointer<GBMSurface> to give us a GBMSurface* object
Call the gbm_surface*() on that operator
Then cast that to a void* for eglCreatePlatformWindowSurfaceEXT
What we did:
Cast the std::shared_ptr<GBMSurface> to a gbm_surface* then cast that
to void*.
This is just a garbage value and it crashes in Mesa when we do our first
paint.
I've replaced that with an explicit method then we can use shared_ptr's
-> operator rather than get() which does the right thing in a readable
way.
Test Plan:
It crashed after rebasing to master (for Aleix too)
No longer crashes
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8251
Summary:
The gbm_surface is owned by the EglGbmBackend, but it's not the only one
using it. The DrmSurfaceBuffer is also using it and needs it to destroy
the gbm_bo. Now this can become a problem in the following situation:
* a page flip is still pending
* the EglGbmBackend destroys the gbm_surface
-> when the page flip happens the DrmSurfaceBuffer will try to destroy
the gbm_bo and crash as the gbm_surface is no longer valid. This
situation can happen when switching screens or when switching compositing
backend (OpenGL 2 -> OpenGL 3).
To address this problem a class GbmSurface is added which wrapps the
gbm_surface pointer. The EglGbmBackend creates and holds a shared pointer
to the GbmSurface and passes that one to the DrmSurfaceBuffer. So when
cleaning up the gbm_surface only the shared pointer is reset and in case
the DrmSurfaceBuffer still needs it, it can access it without problems.
BUG: 385372
FIXED-IN: 5.11.0
Test Plan: Not yet
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8152
Summary:
Unfortunately a rather large change which required more refactoring than
initially expected. The main problem was that some parts needed to go
into platformsupport so that the platform plugins can link them. Due to
the rather monolithic nature of scene_opengl.h a few changes were
required:
* SceneOpenGL::Texture -> SceneOpenGLTexture
* SceneOpenGL::TexturePrivate -> SceneOpenGLTexturePrivate
* texture based code into dedicated files
* SwapProfiler code into dedicated files
* SwapProfiler only used in x11 variants
* Safety checks for OpenGL scene moved into the new plugin
* signal declared in SceneOpenGL moved to Scene, so that we don't need
to include SceneOpenGL in composite
Test Plan: Nested OpenGL compositor works
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7740
Summary:
A dedicated X11EventFilter is added and created from the X11Cursor in
case we have XFixes. This means some more X11 specific code is now only
on X11.
Test Plan: Only compile tested.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7843
If the system has a virtual device and KWin is run on virtual platform
we can assume the user intended that KWin should use the virtual device
and not a render node of the system.
This might fix the random test failures on build.kde.org (T6546).
Summary:
Only needed for kwin_x11 variant (required for the non-composited
Outline). As that's nowadays in the x11 platform, we can move the
complete XRenderUtils support into the platform. Thus KWin core does
no longer require to link it.
Test Plan: Compiles
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7760
Summary:
After changing the output configuration, the client expects that it is informed
whether or not a new configuration has been applied (or failed). This was ommitted
so far, meaning that clients wouldn't know what happened in kwin.
Since we don't track if a setting failed yet, send the applied() signal regardless.
CCBUG:384733
Test Plan: Verified that the signal arrived in libkscreen after changing scale of an output
Reviewers: graesslin, davidedmundson
Reviewed By: davidedmundson
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7910
Summary:
In the DRM plugin the cursor is currently is drawn at the native size
given.
Therefore we don't want to scale the icon offset as that leads to it
being drawn every so slightly off-sync.
BUG: 384769
Fixed-in: 5.11.0
Test Plan:
Kate now selects lines based on the middle of the cursor, not the top left.
I'd previously gotten so used to it, I hadn't realised it was actually a bug :/
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7868
No idea why the code compiles on my system. This change is based on the
output on build.kde.org.
CMakeFiles/testXRandRScreens.dir/__/plugins/platforms/x11/standalone/screens_xrandr.cpp.o:
In function `KWin::XRandRScreens::event(xcb_generic_event_t*)':
/home/jenkins/workspace/Plasma kwin kf5-qt5 SUSEQt5.9/plugins/platforms/x11/standalone/screens_xrandr.cpp:210:
undefined reference to `KWin::Options::currentRefreshRate()'
...
Summary:
The code in events.cpp was problematic as it was called in a Wayland
session. So KWin changed outputs, this gets mirrored to XWayland and
then KWin reacted on the XRandR event and might have even changed the
refresh rate due to that - bad idea.
This change moves the code into the already existing X11EventFilter for
XRandR events in XRandRScreens.
Test Plan: Run kwin_x11 in gdb on Xephyr, breakpoint in new code and triggered XRandR event
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7654
Summary:
Several of the subclasses are already derived from QObject.
The main reason is that the class should be moved out of KWin core in
order to move the OpenGL scene into a plugin. As Compositor calls into
the AbstractEglBackend to unbind the wayland display this creates a
problem which is easily solved by turning the AbstractEglBackend into a
QObject and connect to the signal emitted by the Compositor.
Test Plan: Compiles
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7669
Summary:
By moving the functionality into the Platform API we can also implement
support on other platforms which support this in general (e.g. DRM once
Roman's color adjustment patches landed).
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D7447
Summary:
Not needed except for X11/non-composited usage, so should be in the
plugin instead of core.
Platform API is extended to create a decoration renderer.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7444
This change is similar to D7232 and moves the scene_qpainter into a
dedicated plugin. Compared to the XRender case it's more complicated as
the platform plugins need to implement a platform specific backend.
The base implementation for this part used to be in scene_qpainter. As
the idea is to completly move it away from KWin core it would be point
less to still have the backend definition in KWin core, but it cannot
be in the scene plugin as otherwise all platforms need to link the
plugin.
To solve this a new platformsupport subdirectory is added which contains
the scene platform backend as a static library. For the OpenGL scene such
a static library will also be required.
Test Plan: SceneQPainter test still passes, nested compositor still works
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D7259
Summary:
First step for loading the compositor Scenes through plugins. The general
idea is that we currently needlessly pull in all the Scenes although only
one will be used.
E.g. on X11 we pull in QPainter, although they are not compatible. On
Wayland we pull in XRender although they are not compatible.
Furthermore our current Scene creation strategy is not really fault
tolerant and can create situations where we don't get a compositor. E.g
on fbdev backend the default settings won't work as it does not support
OpenGL.
Long term I want to tackle those conceptional problems together:
we try to load all plugins supported by the current platform till we have
a scene which works. Thus on Wayland we don't end up in a situation where
we don't have a working compositor because the configuration is bad.
To make this possible the switch statement in the Scene needs to go and
needs to be replaced by a for loop iterating over all the available
scenes on the platform. If we go there it makes sense to replace it
directly with a plugin based approach.
So this is a change which tackles the problem by first introducing the
plugin loading. The xrender based scene (as it's the most simple one)
is moved into a plugin. It is first tried to find a scene plugin and only
if there is none the existing code is used.
Test Plan: Tested all scenes
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7232
Summary:
KWin::displayWidth and KWin::displayHeight are bound to X11 which
doesn't make much sense on X11. In addition KWin internally knows
the overall display dimensions through the Screens singleton class.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D1798
Summary:
Creating the OutlineVisual is moved into the Platform API. The default
implementation creates the composited OutlineVisual. The X11 standalone
platform overrides it and creates the non composited outline in case no
compositing is used.
Test Plan:
Run kwin_x11 with KWIN_COMPOSE=N and KWIN_COMPOSE=X,
non composited outline and composited outline loaded
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7450
Summary:
This change splits out the X11 specific event filtering into a dedicated
X11EventFilter. It is created in the x11 standalone platform plugin when
the first Edge is being created.
Some of the X11 specific code is removed from ScreenEdges, though more
refactoring is possible in ScreenEdges to share more code between X11
specific and generic implementation.
Test Plan: Run KWin on Xephyr, screen edge approach effect still shows
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7406
Summary:
KWin::updateXTime only delegates into the platform API where the method
is a no-op. The actual implementation is moved into the X11 standalone
platform as it uses QX11Info which is non functional except on the X11
standalone platform.
This change exposes a problem with timestamp handling: on Wayland the
X11 timestamp does not get updated at all, causing e.g. window sync not
work correctly (c.f. bug 374881). We cannot implement the updating in the
same way as QX11Info/Qt xcb platform does it as that would introduce a
blocking roundtrip to XWayland which is dangerous.
As a side-effect this change removes linking to Qt5::X11Extras in kwin
core as it's no longer needed.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7515
Summary:
Based on the work of 3f4995fb9b this change
introduces a GlxContextAttributeBuilder to make the requesting of context
attributes cleaner, more verbose and less error prone copy and paste.
Test Plan:
Switched between Core and legacy and verified the output;
extended auto test
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D6411
Summary:
The OverlayWindowX11 also inherits from X11EventFilter and performs
the filtering itself.
Test Plan: Compiles, not yet tested as I'm on Wayland
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D7197
Summary:
The overlay window is only needed for the X11 based compositors. Given
that it is better suited in the X11 platform. Unfortunately it is not
possible to completely move it into the platform plugin as it is still
referenced in KWin core (e.g. SceneXRender). Due to that the
OverlayWindow in KWin core is turned into a pure virtual class with the
implementation being moved into the plugin.
The platform API gains a new virtual factory method which is only
implemented in the X11 platform.
Test Plan: Compiles
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7193
Summary:
Only build
* `virtual_terminal.cpp` in the presence of `linux/vt.h`
* `fbdev`-backend in the precense of `linux/fb.h`
Test Plan:
Reviewers: #kwin, #freebsd, graesslin, bcooksley
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6847
Summary:
Introduces a few more attributes needed for creating the OpenGL context
used by the QPA.
Test Plan:
Extended test and run KWin/Wayland and verified that OpenGL context
gets created correctly.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6734
Summary:
KWin already used C++14 constructs in a conditional way. This doesn't
make much sense today, it's better to just require C++14.
For KWin only gcc and clang are currently compilers of relevance. Gcc
supports C++14 since version 5 and defaults to C++14 since 6.1 [1].
Clang supports C++14 since version 3.4 [2].
An overview of compiler support in various distributions:
* Debian stable (stretch): gcc 6.3, clang 3.8
* Debian oldstable (jessie): 4.9, clang 3.5
* Ubuntu 17.04: gcc 6.1, clang 3.8
* Ubuntu 16.04: gcc 5.3, clang 3.8
* openSUSE Tumbleweed: gcc 7.1, clang 4.0
* openSUSE Leap 42.3: gcc ?, clang ? [3]
* FreeBSD: clang >= 34 in ports
* Slackware 14.2: gcc 5.3
This overview shows that every distro out there has at least one
supported compiler which can still compile KWin with this change.
[1] https://gcc.gnu.org/projects/cxx-status.html#cxx14
[2] https://clang.llvm.org/cxx_status
[3] Sorry I fail to understand openSUSE's package repository.
It seems that there is gcc 7 available, but gcc package is 4.8
Test Plan: Compiles on my neon system
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6634
Summary:
Aurorae did not render correctly. This change addresses the problem for
both maximized and restored windows.
BUG: 373319
FIXED-IN: 5.10.4
Test Plan: shaded windows with Plastik and SVG based theme
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6719
Summary:
On Wayland aurorae was creating a lot of stress for the system and
basically turning the system unusable in a short time. This was due to
a recursion starting to create OpenGL contexts. The window created a
decoration (aurorae) which created a QQuickWindow. For that KWin creates
an internal window which in turn triggers the creation of a window
decoration and so on and on.
By simply setting the render QQuickWindow as frameless we can prevent
this recursion.
Test Plan: Tested on Wayland and X11. On Wayland the recursion is gone.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6726
Summary:
Weird NVIDIA behavior fixup part 2. Now that we do no longer freeze when
NVIDIA decides to create an OpenGL error on startup
(aefb5f4dd9), we experience a new issue.
KWin is terminating (no idea why, [1]) and at the same time the OpenGL freeze
protection thread is still running. So far we did not terminate the
thread on shutdown and thus we hit an abort in Qt.
This change ensures that we properly terminate the thread on shutdown.
[1] My current theory is that games terminate KWin, common pattern of
bug reports is "steam".
BUG: 382283
FIXED-IN: 5.10.4
Test Plan:
Tortured KWin by making sure I go through the code path,
saw the abort without the patch, no more abort with the patch
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6735
Summary:
When returning early in DrmOutput::present() because of some error KWin
didn't delete the proposed buffer, therefore not releasing the surface
lock of the GBM buffer to the EGL surface.
This patch makes sure that on any error in present we cleanup the proposed
DrmBuffer.
Reviewers: #kwin
Subscribers: #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6660
Summary:
This is a regression due to changes in Breeze to support Qt 5.8+ behavior
change. KWin's own QPA operates like < Qt 5.7 and breeze was programmed
against that. Due to that it can happen now that Breeze hits code paths
in which KWin does not have a surface.
To trigger one only needed to open the user actions menu twice.
This change adds a test case which simulates the problem and fixes all
crashes happening in the code path.
Most likely shadows are now broken for KWin's own windows, this change is
only to prevent the crash and thus is for 5.10 branch, while shadow
fixing will go to master branch.
BUG: 382063
FIXED-IN: 5.10.4
Test Plan: New test case
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6533
Summary:
There is a regression in WindowBasedEdge::soStopApproaching. Due to
only operate when the edge activates for pointer it is possible that
the cursor polling stays active. Explaining the situation:
1. Activate switch desktop when moving window
2. Start moving a window
3. Move mouse into the approach geometry
-> doStartApproaching activates as we are moving a window
4. stop moving window
-> doStopApproaching early exits as the position does not activate for
pointer any more - we are not moving a window
-> cursor polling is still connected and whenever mouse enters edge
approaching is started
The analysis shows that the check whether activates for pointer is wrong
in the case of stop approaching. If the edge started to approach, we also
need to stop approaching.
This change addresses the problem by turning the check into whether the
connection for cursor position update is set.
This is the third bug fix to the X11 screen edge handling after
introducing touch screen edges. This needs more manual testing by
everybody in the Plasma team who is still using X11.
BUG: 381849
FIXED-IN: 5.10.4
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6467
Summary:
Mismatch in the major/minor version. Requesting 1.2 doesn't make any
sense given that KWin requires 2.1.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6401
Summary:
There was a regression introduced with bug fix eec6afe6 which added
a for pointer events only check also to doUpdateBlocking. Do to that
the edge blocking mechanism didn't work for touch edges.
BUG: 380476
FIXED-IN: 5.10.3
Test Plan:
verified with xwininfo that there is no longer a window when
in full screen. Activated edges through touch and pointer
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6304
Summary:
Based on earlier phab-request D2079. Adds the nvidia memory purge
extension to the robust context creation.
BUG: 344326
FIXED-IN: 5.10.3
Test Plan: Only compile tested as I don't have an NVIDIA card.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6344
With the recent patches AMS should be stable enough for daily use. It was
tested by several people in the last week without reporting back any problems.
So make it the new default on master.
Leave an env variable for now to deactivate it, in case something bad happens.
Reviewers: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5934
Summary:
As noted by Thomas L we're casting the scaleFactor to an int far too
early, which in the worst case means we end up with Aurorare themes not
rendering.
This moves the rounding to where it's used per border.
BUG: 380524
Test Plan:
Forced Xft.DPI to 95 with xrdb. Confirmed that it was broken
Applied this patch. Got decoration again
Reviewers: #plasma, mart
Reviewed By: #plasma, mart
Subscribers: mart, rikmills, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6099
Summary:
I keep having to re-add this patch locally to see which config is
actually in play.
Test Plan: Compiles
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5795
This patch makes the AMS execution path work with the new DrmCrtc and
DrmBuffer structure and solves major issues about:
* VT switching
* DPMS
* Hot plugging
* Logout
* Memory leaks
Test Plan:
Tested with Gl and QPainter.
Reviewers: #kwin
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5191
Split off GBM based buffers to a separate file, which gets only included,
when GBM is available.
Note, that this also removes the gbmCallback, since already before this
patch we did delete the buffers always without it.
The plan is to later use this file for via GBM directly imported Wayland
buffers as well.
Test Plan:
Tested with Gl and QPainter backends.
Reviewers: #kwin
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5179
To get an image from KWin to the screen in the DRM pipeline we combine a CRTC,
an encoder and a connector. These objects are static in the sense, that they
represent real hardware on the graphics card, which doesn't change in a
session. See here for more details:
https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-kms.html
Until now we used DrmOutput as the main representation for such an active
rendering pipeline. I.e. it gets created and destroyed on hot plug events of
displays. On the other side we had no fixed representation of the static kernel
objects throughout the lifetime of KWin. This has several disadvantages:
* We always need to query all available static objects on an hot plug event.
* We can't manipulate the frame buffer of a CRTC after an output has been
disconnected
* Adding functionality for driving multiple displays on a single CRTC (i.e.
cloning) would be difficult
* We can't destroy the last frame buffer on display disconnect because the CRTC
still accesses it and have therefore a memory leak on every display disconnect
This patch solves these issues by storing representations of all available CRTC
and Connector objects in DrmBackend on init via DrmCrtc and DrmConnector
instances. On an hotplug event these vectors are looped for a fitting CRTC and
Connector combinations. Buffer handling is moved to the respective CRTC
instance. All changes in overview:
* Query all available CRTCs and Connectors and save for subsequent hotplug
events
* Fix logic errors in `queryResources()`
* Move framebuffers, buffer flip and blank logic in DrmCrtc
* Remove `restoreSaved()`. It isn't necessary and is dangerous if the old
framebuffer was deleted in the meantime. Also could reveal sensitive user
info from old session.
Test Plan:
Login, logout, VT switching, connect and disconnect external monitor, energy
saving mode.
Reviewers: #kwin
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5118
Summary:
To have touch events working we need to do memory layout changes on the
xcb events. This is fine for identifying the touch events which should
trigger the screen edge. But when passed on to Qt to have QtQuick windows
(e.g. Alt+Tab) handle the touch events, this results in a problem:
Qt itself does also the memory movement and then the movement is double
and touch events break.
To prevent this problem an RAII class is added which moves the memory in
the ctor and moves it back in the dtor. So during KWin's processing it
has the right memory layout and later on in Qt's processing it has the
proper "wrong" layout which Qt can fix again.
Test Plan: Touch events in Alt+Tab work
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5549
Summary: Basically just a copy and paste from the relevant Qt Wayland
parts.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D5172
Summary: We need to set the viewport so that we scale from device pixels to global compositor space.
Test Plan:
Ran kwin_wayland properly on my laptop without setting KWIN_COMPOSE.
Most things worked.
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3504
Summary:
Another regression from enabling touch support on X11.
The approach window for pointer input gets unmapped as soon as the mouse
enters the window. This ensures that mouse motion events are not stolen
from other applications. But with the touch events we did not even react
on the enter event if it's not activated for pointer. The result was an
area around the screenedge being blocked for pointer input.
This change only creates and maps the approach window if the edge is
activated for pointer input.
BUG: 378951
Test Plan:
Activated edges through pointer and touch, reconfigured and tested
motion events
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5528
Summary:
With the TabBox I observed the following issue:
1: trigger TabBox through screen edge
2: exit TabBox
3: trigger TabBox again through screen edge
Actual behavior: in step 3 the GUI does not show. If now using Alt+Tab
to show the TabBox the gui shows, but through screen edge it stays
broken.
Investigation showed that the difference is a direct show in screen edge
case and a delayed show in Alt+Tab case. Futher investigation shows that
an invalid geometry gets requested in the broken case. While this might
indicate an issue in another area it makes sense to protect KWin
internally against it and not to break rendering.
Thus this change ensures that a valid FBO does not get replaced by an
invalid sized FBO.
Test Plan:
Tested that Alt+Tab works correctly when triggered through
edge
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5438
Summary:
Grabbing the touch events seems to cause issues. It seems to also grab
pointer events from touchpad and breaks touch input on other events.
Also testing shows that we don't need it and get touch ownership events
for our screenedge windows reported.
BUG: 378951
Test Plan: Triggered touch screen edge, normal system usage on X11
Reviewers: #plasma, #kwin
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5520
Summary:
Libdrm 2.4.78 introduces a version 2 and if KWin gets built against it
our code would break. Given that this change is for Plasma/5.8 branch.
Closes T5839
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Maniphest Tasks: T5839
Differential Revision: https://phabricator.kde.org/D5380
Summary:
Cursors are drawn low level, so need to go from global compositor space
to device space
(multiplied by the out scale)
Test Plan: Elements interacted underneath where the mouse was
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3499
Test Plan:
For the first time, actually plugged in my high DPI laptop.
Tested both 1x and 2x windows on 2 real displays one high DPI, one normal
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3498
Summary:
In theory we shouldn't need to scale input, however when in windowed
mode
we need to convert the host into output normal.
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3496
Summary:
Provides a virtual method in Screens where backends can supply the scale
of each screen, this is then set on each output.
For the X windowed backend this value is taken from a command line
parameter.
Test Plan:
Ran windowed mode with --scale 1 and 2
then kate --platform=wayland from another screen.
On the latter case UI elements were scaled up correctly
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3159
Summary:
This change extends the XInputEventFilter to also listen for all touch
events on the root window.
The touch points are passed to the new gesture recognizer in screenedges.
Please note that I'm not using X11 and have hardly tested this change in
real world. To our X11 users with touch screen support: please test!
Test Plan: Can activate and deactivate the screenedge.
Reviewers: #plasma, #kwin
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D5137
Summary:
Each Edge creates a SwipeGesture for touch activation. The swipe needs to
be a single finger starting from the edge into the screen for at least
20 %. The SwipeGesture and GestureRecognizer is extended to support the
use cases of the touch screen edge swipe.
New features supported by the gesture system are:
* minimum and maximum position
* a minimum delta for the swipe
* progress signal based on the minimum delta
* starting a swipe with a start point
The Edge has the progress signal connected to its approach signal, thus
visual feedback is provided through the screen edge effect.
The screen edge system supports touch only for the edges (corners are
too difficult to activate on touch screens). At the moment the following
features are supported:
* screen edge show/raise of windows (e.g. auto hidden panels)
* trigger the configured action
* trigger the configured callback function (e.g. script)
In future it might make sense to add a touch specific configuration
action to support different actions for screen edges activated by mouse
and touch.
BUG: 370323
Test Plan:
configured a screen edge and triggered through touch,
added an auto-hiding panel and triggered through touch
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel
Tags: #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D5106
This makes clicking the application menu button trigger the menu.
CHANGELOG: Aurorae window decorations now support global menu button
BUG: 375862
FIXED-IN: 5.9.5
Differential Revision: https://phabricator.kde.org/D5130
Summary:
aurorae themes have hardoded sizes in pixels in their config files,
but the framesvgs scale by themselves based on font dpi leading
to corrupt results
scale all sizes using the same logic(that's also used in c++ based
kdecorations), gives correct looking scaled decorations
BUG:375868
Test Plan: see screenshot
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5114
Summary:
In the current code we update the shadows during the decoration paint.
Because this is called in the middle of the Scene::paintWindow and we
have already painted the shadows/built quads, the setShadow() was
deferred to avoid the obvious bugs updating the shadow would cause.
This sucks because it means we're always out by one frame, and it means
we always do two updates.
As the shadow is taken from the buffer, we can solve that problem by
updating the shadow before any painting at the same time that we update the
buffer. This means we don't need the deferring hack.
This patch also fixes a related issue that m_padding could have
changed after the buffer is rendered, but before painting. This would lead to rendering a mess.
This patch caches the relevant padding at the time the buffer is
created.
@Notmart, this is subtly different from the patch I showed you last night,
for me it fixes things without your other patch, but I don't know. If it doesn't it's
still (IMHO) a lot cleaner.
Test Plan:
Ran an Aurorae theme
Maximised, restored, resized. Everything.
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D4990
Summary:
To ease development of touchpad gestures it's useful to have support in
the nested Wayland platform.
Test Plan: Shown in Debug Console of nested KWin
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5059
The logic on page flips was inconsistent in the sense, that it should never
release a GBM buffer before it's not used (i.e. viewable on the display)
anymore. This happened unintended until now (on page flip we never really
did something useful in the else statement, because if we're here it's not
a GBM buffer anyway).
With this patch we:
* delete on page flips always only the old buffer, which is not used anymore
* release the buffer earlier on interrupts like display disconnect in order
to be able to destroy the EGL context
Test Plan:
Tested in non atomic mode (atomic mode is obsolete right now until my other
WIP patch D4539 is ready to be merged): Login, logout, suspend, normal use.
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5060
Summary:
The functionality regarding triggering modifier only shortcuts is moved
out of Xkb - where it doesn't belong to - and is turned into an input
event spy listening for the changes it is interested in. Previously
the state got queried by asking e.g. for the pressed buttons, now it's
tracked directly.
The X11 side needs a larger change due to that as now pushing the events
into Xkb does not trigger modifier only shortcuts any more. Instead the
"normal" way through the platform API needs to be used which triggers the
processing of filters and spies.
The problem here is that our redirections only process events if they are
inited and that only happens on Wayland. We cannot call init on them as
that would create all the Wayland filters and spies and processing would
probably break. As an intermediate solution the spies are now processed
and there we know that it won't matter. A future solution would be to
remove the init checks completely and just send through both filters and
spies and ensure that on X11 only the supported ones are loaded.
Closes T5220
Test Plan: Tested on Wayland and X11
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Maniphest Tasks: T5220
Differential Revision: https://phabricator.kde.org/D4578
Summary:
Increases minimum Qt version to 5.7. This allows to drop the pre-5.7
virtual keyboard and various ifdefs for now unsupported versions.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4485
Summary:
InputRedirection has a workaround to add a connect on a QAction which
is used for a global shortcut. This is specific to the X11 platform as
the xtime needs to be updated.
This change adds a new virtual method to the Platform and moves the
implementation into the X11 standalone platform. Thus it does no longer
gets called on Wayland.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4168
Summary: This way they can be properly listed by Discover
Reviewers: graesslin, #plasma
Reviewed By: graesslin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3765
Summary: Enums taken from hardware/hwcomposer_defs.h header file
Test Plan: builds
Reviewers: #kwin, graesslin, mart
Reviewed By: mart
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3699
Summary:
HWcomposer version 1.4 introduced setPowerMode, which replaces the
blank(). This adds support for it. There are various code paths
possible,
- If KWin is built against hwcomposer 1.3 headers, then setPowerMode
code is not compiled in, and it will use blank to turn display off.
- If KWin is built against hwcomposer 1.4 headers, it will have
setPowerMode code path compiled in. It will be used only on devices with
1.4 and 1.5 version of hwcomposer.
This is slightly insane, because Android can report hwcomposer 1.5 even
when headers are of 1.4 version..
Test Plan: Tested this on Nexus 5X which reports 1.5 version of hwcomposer
Reviewers: graesslin, #plasma
Reviewed By: graesslin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3686
Summary:
This supports "grabbing" the pointer on right ctrl key just like on X11.
If the Wayland server supports pointer constraints protocol, the nested
Wayland compositor creates a confined pointer if the right ctrl key is
pressed.
On another right ctrl press the (active) constraint gets removed again.
To indicate the current state the window title gets updated. This also
implements window title support for the first time.
This change implement T4604.
Test Plan: Tested with a modified KWin with server-side pointer constraints support
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3488
Summary:
It's only needed by the GLX backend, so only find if we have GLX at all
and only link where needed. As it was handled incorrectly before, it's
now using proper ifdef.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3448
Summary:
Instead of having the egl extensions in the global kwinglutils lib it
becomes private to the AbstractEglBackend. Just like on glx the
glxextensions are moved into the platform.
The extensions are queried from initEglAPI, that is as early as possible
after initializing the EGLDisplay. This ensures that any implementing
subclass can access the extensions early enough.
As a note: the EglOnXBackend had a potentially wrong sequence for
initializing the buffer age extension. It is now moved to the correct
place where the result is needed for the first time.
From the global API eglExtensions are removed from hasGLExtension and
the eglExtensions function is dropped. As by that initEGL did not do
anything it is also dropped.
Test Plan:
Tested nested kwin on Wayland, still works, extensions shown
in debug console
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3396
Summary:
A new virtual method is added to Platform:
startInteractiveWindowSelection
The interactive window selection enters a mode where the user can select
a window through the pointer or keyboard device. The cursor is turned
into a crosshair cursor, unless another cursor name is provided (e.g.
pirate for kill window).
Once a window is selected the provided callback method is invoked with
the selected Toplevel as argument. In case the user cancelled the
selection a nullptr argument is passed in.
Currently it's only implemented by the X11 standalone platform using the
logic from KillWindow. Just instead of killing the window the callback
is invoked.
KillWindow loses the X11 implementation and interacts with the new
functionality in Platform by providing a lambda function for the
killing.
Test Plan: Killing of X11 windows is still possible
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3363
Summary:
And finally nothing inside libkwineffects, libkwinglutils,
libkwinxrenderutils and kwineffect and kwin core uses KWin::display.
We are finally XLib free!
This change drops KWin::display and removes the include to QX11Info from
kwinglobals.h. And the libraries no longer need to link X11Extras. Due
to that removal a few seeming unrelated changes are required to add the
include where needed and linkage to X11Extras.
The biggest change is to x11 platform plugin which still needs the
display and caches it in the Platform and passes it to various places in
a way that the code doesn't need to be adjusted.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3337
Summary:
KWin still resolves some OpenGL function pointers. For that it needs to
use either eglGetProcAddress or glxGetProcAddress. With other words the
method to resolve needs to know whether it is egl or glx and needs both
a dependency to egl and glx. Especially the dependency to glx is ugly as
that pulls in XLib into our library.
The way so far was to pass an enum value to the initGL method to know
whether it's EGL or GLX. With this change the enum value is removed and
replaced by a function pointer to resolve the methods.
This simplifies the resolve code and allows to completely remove the glx
variant we still had in the library. Thus kwinglutils library is now glx
and XLib free.
Test Plan: nested KWin with OpenGL/EGL still works
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3336
Summary:
This isn't used and if it was would give the wrong value.
Actual correct size can be determined via Screens object.
Test Plan:
Grepped it's not overriding anything
Compiles
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3385
Summary:
No need to resolve glx methods through the shared lib. At the moment
this duplicates some code, but will be cleaned up with a follow up
change.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3335
Summary:
Glx extensions are only interesting to the glxbackend. Given that
querying can be moved there.
In order to simplify the extensions can be stored in the OpenGLBackend
which also provides the convenience check as before.
The egl platforms should also be adjusted to query in that way and
remove it from the kwinglutils.
There is still a usage of the glxextensions inside kwinglutils to
resolve one function. That should also be moved into the platform.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3332
Summary:
Glx version is only required once in the standalone x11 platform. No
need to have that in the shared kwinglutils library.
Removes one xlib usage from shared kwin.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3329
Summary:
to uniquely identify screens (in QScreen::name()) add the conenctor
name and id (such as HDMI-A-1) to the model identification
Test Plan: tested a full plasma session
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3341
Summary:
Output scaling can't ever work on a single buffer; especially if they're
different scales and overlapping.
This ports the virtual backend to perScreenRendering so that I can use
it for
tests.
ctest fails here, but it fails on the tests that it failed on before..
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3306
Summary:
Some platforms support to hide and show the cursor. This will be needed
by e.g. the zoom effect which currently only provides this functionality
on X11.
This change introduces a new method in the Platform to hide and show the
cursor. The methods need to be called balanced and the implementation
takes care of only showing again if all hide got matched by a show.
The actual hiding and showing is performed in the platform plugins. So
far the DRM and X11/Standalone platforms implement the required
functionality, though other platforms probably could implement as well.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3119
On build.kde.org the autotests started to crash on tear down due to a
newer Wayland library. The reason is that the KWayland::Client::Outputs
are destroyed after the internal Wayland connection is destroyed.
This change parents the created Outputs to the Registry like the other
objects. To ensure that the KWin::QPA::Screen doesn't have a problem
with that, it is changed to a QPointer - nullptr checks are already in
place.
Hopefully that will fix the crashes on build.kde.org, but there is a
chance that more errors are hidden.
Summary:
With nouveau driver it can happen that KWin gets frozen when first trying
to render with OpenGL. This results in a freeze of the complete desktop
as the compositor is non functional.
Our OpenGL breakage detection is only able to detect crashes, but not
freezes. This change improves it by also added a freeze protection.
In the PreInit stage a thread is started with a QTimer of 15 sec. If the
timer fires, qFatal is triggered to terminate KWin. This can only happen
if the creation of the OpenGL compositor takes longer than said 15 sec.
In the PostInit stage the timer gets deleted and the thread stopeed
again.
Thus if a freeze is detected the OpenGL unsafe protection is written into
the config. KWin aborts and gets restarted by DrKonqui. The new KWin
instance will no longer try to activate the freezing OpenGL as the
protection is set.
If KWin doesn't freeze the protection is removed from the config as
we are used to.
Check for freezes for the first n frames, not just the first
This patch changes the freeze detection code to detect freezes in the
first 30 frames (by default, users can change that with the
KWIN_MAX_FRAMES_TESTED environment variable). This detects
successfully the freezes associated to nouveau drivers
in https://bugzilla.suse.com/show_bug.cgi?id=1005323
Reviewers: davidedmundson, #plasma, #kwin, graesslin
Reviewed By: #plasma, #kwin, graesslin
Subscribers: luebking, graesslin, kwin, plasma-devel, davidedmundson
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D3132
Summary:
There are several effects (screenshot, zoom) which need access to the
cursor image and cursor hotspot. So far these effects used X11
unconditionally to get the cursor which obviously does not work on
Wayland.
This change adds a new class PlatformCursorImage to kwinglobals which
wraps what a cursor is (image and hotspot) and adds a new virtual method
to Platform to provide such a PlatformCursorImage. By default it's the
cursor image the Platform tracks. On X11/standalone platform this new
virtual method is overriden and provides a PlatformCursorImage from X11
using the code previously used in screenshot effect.
Screenshot effect and zoom are adjusted to use the new API instead of
X11.
Test Plan:
Zoom effect tested on Wayland, now gets the proper cursor icon.
X11 functionality not yet tested.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3093
Summary:
The modifier-only-shortcuts break as soon as KWin grabs the keyboard
(e.g. alt+tab, present windows, etc.). The investigation shows that in
that case KWin does not get any raw key events any more and thus gets
confused about the state of the hold modifiers. E.g. alt+tab has the
alt key pressed, but we miss the release as the keyboard is grabbed.
This change addresses the problem by installing an additional event
filter for key press and release event which only filters for key events
on the root window. That way we can be sure that it only operates when
KWin grabbed the keyboard on the root window.
Note: the problem only exists when grabbing on the root window. If the
grab is on another window (e.g. moving a window) we still do get all
events.
The problem also seems to not happen if another application grabbed
keys on the root window. E.g. for key combinations grabbed by
kglobalaccel the correct sequence of key press/release as raw events
are reported. Also while the screen is locked the evemts are reported
and kscreenlocker grabs the keyboard on the root window.
Test Plan:
Used Alt+Tab and Present Windows and tried to activate launcher
afterwards.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2980
This is Milestone 1 of full support of Atomic Mode Setting (AMS) and
Universal Planes in the KWin DRM backend.
With Milestone 1 we can use the primary plane of a DRM output and do an
AMS commit (this means mode setting aswell as page flipping), if the
driver supports it. Until now the functionality is only tested on Intel
graphics. You need the drm-next kernel for most recent DRM kernel
developments. As boot option set "i915.nuclear_pageflip". Additionally
at the moment AMS is still hidden behind the environment variable
KWIN_DRM_AMS. Set it, if you want to try out AMS.
What needs to be done next: Make it possible to transfer EGL buffers
directly to planes and implement logic for deciding about using a plane
or not for a specific buffer.
You can read more about it on LWN:
https://lwn.net/Articles/653071
And on Martin's blog:
https://blog.martin-graesslin.com/blog/2015/08/layered-compositing/
I used as model previous work by Daniel Stone for Weston:
https://git.collabora.com/cgit/user/daniels/weston.git
Reviewed-by: mgraesslin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2370
Summary:
SharingPlatformContext::swapBuffers needs to make the context current.
For this is calls makeCurrent. Later on this tries to bind a fbo, which
checks calls into the current QOpenGLContext. As we called makeCurrent on
our own platform context Qt doesn't know that the context is current and
returns in the worst case a nullptr and crashes.
This change calls makeCurrent on the QOpenGLContext so that Qt also knows
that this context is current now. The QOpenGLContext calls makeCurrent on
the platform context, so what our code tried to do is still being done.
In addition the method context() in AbstractPlatformContext is renamed to
eglContext to no longer shadow the method in QPlatformContext.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2582
Summary:
The raw pointer button events intercepted in the XInput2 input filter
get sent through the Platform to the PointerInputRedirection. This
makes the PointerInputRedirection track the pointer button state and
emit the signals for button changed and axis changed.
These signals are used by the modifier-only shortcut detection to
determine whether the shortcut should trigger.
On X11 the "normal" input handling doesn't use the InputRedirection
and the emitted signals are not consumed by anything else. As
PointerInputRedirection is not inited the events are not forwarded
to the input filter, thus won't be processed by other parts and
won't interfere with the normal event processing on X11.
Given that it also doesn't matter that the input filter does not
apply the left-handed setting. The internal tracking will have a
wrong mouse button, but nothing is going to do decisions based on
the value of the pressed mouse button. For the moment all we are
interested in is that a button is pressed.
Test Plan:
Pressed meta, clicked, scrolled, released meta: launcher
did not open. Pressed meta, released meta: launcher opened
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2506
BUG: 367730
Just like 4e7392b907:
the ownership of the gbm_device must be passed to the Platform as
the ownership of the EGLDisplay is also passed to the Platform and
we may not destroy the gbm_device for an EGLDisplay we are still using.
With this change I could restart the OpenGL compositor successfully
and switch from OpenGL 3.1 to OpenGL 2 without a crash or rendering
issues.
The Egl backend opens the drm device and creates a gbm_device from it.
From that it creates the EGL device. The EGL device outlives the EGL
backend (e.g. for compositor restart). So far the EGL backend destroyed
the gbm_device when going down which mesa did not like at all when a
new context got created on that EGL device.
Thus the ownership of gbm_device is also passed to the Platform so that
the compositor can be restarted.
This makes the TestSceneOpenGL no longer crash during the restart
compositor test.
At the same time the xinput2 integration is split out of X11Cursor
and made a standalone part of the platform plugin. XInput integration
is nowadays not only used by the cursor position polling, but also
for modifier only shortcuts.
By splitting it out the modifier shortcuts start to work also when
one doesn't have anything requesting a mouse position polling.
This also simplifies the conditional builds: xinput integration is
only included if we have support for it at compile time without having
to have many ifdefs in the cursor implementation. For the inclusion of
cursor in the kcmkwin this also removes all the ifdefs.
The key events are only requested if we have xinput 2.1. Otherwise we
would not get all raw events if the input device gets grabbed.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2473
By default the InputRedirectionCursor is created and only the X11
standalone platform creates the X11 specific cursor.
This is a preparation step for moving the X11 specific cursor
implementation into the x11standalone platform plugin.
Summary:
Now powerdevil can adjust brightness using leds subsystem, however, kwin
as well sets brightness to 0 for turning off screen and 0xff when
turning screen back on. This resets the brightness set by the powerdevil
to 100%.
As a solution now kwin listens to brightnessChanged dbus signal of
brightnesscontrol and book-keeps the changed brightness, if screen is
turned off it sets brightness to 0 and when turning screen on, it resets
to old brightness.
If powermanagement service doesn't appear on dbus by default it restores
100% brightness.
Test Plan:
Appearantly this still doesn't work as-it-is on phone, because powerdevil
doesn't emit brightnessChanged dbus signal because of bug in the driver of
backlight control, driver doesn't seem to trigger uevents for changes in
backlight. But with hack in powerdevil to emit brightnessChanged when setting
brightness, this works
Reviewers: broulik, #plasma_on_wayland, graesslin
Reviewed By: #plasma_on_wayland, graesslin
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2468
Summary:
With this change KWin can create window decorations for internal windows.
Thus it's also possible to move internal windows and resize them which is
especially important for the debug console.
Reviewers: #kwin, #plasma_on_wayland, sebas
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2371
Summary:
When closing a nested window kwin_wayland only terminates if the closed
window is the last output window. In a simulated multi-screen setup
closing a window results in the output being removed.
Test Plan: Closed windows, verified with xrandr
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2234
Screens::init sets up a Qt::QueuedConnection connect from countChanged
to changed. This means that when first setting up the connection a
changed signal will be delivered in the next event cycle. This can mess
with other code. E.g. WaylandServer recreating outputs which can make
Xwayland crash or KWin internally crash.
To solve this problem we just need to make sure to set the output count
to the initial value before performing the init.
Reviewed-By: bshah
Summary:
Rational: unredirect fullscreen windows is a weird beast. It's intended
to make fullscreen windows "faster" by not compositing that screen. But
that doesn't really work as KWin jumps out of that condition pretty
quickly. E.g. whenever a tooltip window is shown. KWin itself has a
better functionality by supporting to block compositing completely.
The complete code was full of hacks around it to try to ensure that
things don't break.
Overall unredirect fullscreen has always been the odd one. We had it
because a compositor needs to have it, but it never got truly integrated.
E.g. effects don't interact with it properly so that some things randomly
work, others don't. Will it trigger the screenedge, probably yes, but
will it show the highlight: properly no.
By removing the functionality we finally acknowledge that this mode is
not maintained and has not been maintained for years and that we do not
intend to support it better in future. Over the years we tried to make
it more and more hidden: it's disabled for Intel GPUs, because it used
to crash KWin. It's marked as an "expert" option, etc.
It's clearly something we tried to hide from the user that it exists.
For Wayland the whole unredirect infrastructure doesn't make sense
either. There is no such thing as "unredirecting". We might make use
of passing buffers directly to the underlying stack, but that will be
done automatically when we know it can be done, not by some magic is
this a window of specific size.
Test Plan:
Compiles, cannot really test as I am an Intel user who never
had that working.
Reviewers: #kwin, #plasma, #vdg
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2180
If the event processing is started before everything is fully started
it can happen that we have "evil" events which may crash either Xwayland
or KWin itself. E.g. if the nested window is too large, the window
manager on the host X-Server will request a resize. If the backend does
that it can happen that the wl_output gets destroyed while Xwayland tries
to bind to it and will crash. Thus let's delay all events till we are
ready to process them.
Summary:
The egl implementation for the virtual platform tries to use a render
node if available. If there is no render node it looks for a virtual
(kernel driver vgem) device, which unfortunately does not create a
render node in mainline kernel (there are patches in ChromiumOS).
For this the Udev wrapper is extended to search for renderNode devices
and for virtual dri devices.
If either render node or vgem dri device is found, it is tried to be
opened (without logind escalation) and on success a gbm device is
created on it. If any step of this fails the so far default behavior
of default device is tried for creating the EGLDisplay.
All of this is compile optional, so that the virtual platform does not
hard depend on udev and/or gbm.
Test Plan:
Auto tests which need OpenGL executed and verified that they
use the render node or vgem device.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2216
Summary:
The position of the output being resized was adjusted instead of only
the other outputs.
Test Plan: Resized windows, verified xrandr
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2235
Summary:
So far SharingPlatformContext was only used if the OpenGL context
supports EGL_KHR_surfaceless_context. If not supported, KWin tried to
create a context through the Wayland API. Unfortunately on hwcomposer
platform this results in a crash as libhybris only supports the init
of EGLDisplay for one native platform.
This change tries to also use the SharingPlatformContext if there is
an OpenGL context in general. It reuses the native EGLSurface created
for the compositing scene and makes its own OpenGL context current on
that surface, too. As KWin creates an FBO, it never renders to it, so
it shouldn't matter at all.
In order to prevent EGL_BAD_MATCH errors when making Qt's OpenGL context
current also the EGLConfig from the scene is used to create the context.
Test Plan: Tested on Nexus5 with qtvirtualkeyboard in KWin
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2231
Summary:
KWin needs to support restarting the OpenGL compositor in case of a
graphics reset event.
On Wayland the tricky part is that the applications should not notice
this. Most importantly KWin cannot just destroy the EGLDisplay and create
a new one. But this is how a restart works: the complete compositor gets
torn down and recreated - including the EGLDisplay.
This change moves ownership of the EGLDisplay to the Platform.
The AbstractEglBackend subclasses query the Platform whether there is
already an EGLDisplay. Only if there is no EGLDisplay the EGLDisplay is
created and only if no EGLDisplay is registered with Wayland the bind
is performed.
Another change is regarding the destruction: the AbstractEglDisplay does
no longer unbind the Wayland display and does no longer destroy the
EGLDisplay. The EGLDisplay is destroyed by the Platform - so very late
on application exit. The Wayland display is unbound when the Compositor
terminates.
Test Plan:
Limited testing with the added auto-test. This one needs to
be extended to fully verify that OpenGL applications continue to work.
But this requires build.kde.org to support OpenGL on Wayland.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2202
Summary:
Most platforms like the nested and virtual do not handle the outputs
themselves and WaylandServer announces the Outputs to Wayland.
So far this was static: at startup it got announced once to Wayland
and any changes were not catched.
This change makes WaylandServer listen to changes to the Screens and
sync them to Wayland.
Unfortunately KWin's internal Screen information is not sufficient to
properly synchronize this to Wayland and also Wayland by not supporting
adding/removing modes does not help.
Thus the solution implemented here is to add new outputs reflecting the
changes and then removing the old ones. This creates situations with more
outputs being present than actually there, but prevents that there are
no outputs at all.
Test Plan: Auto test added which verifies this for the virtual platform
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2233
Summary:
When sharing surface and config used by the compositor scene with
QtQuick's OpenGL context an RGBA surface makes Qt way more happy.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2232
Summary:
With this change the Wayland platform plugin uses the XdgShell to
create the window if available. This allows to close the window and
thus quit the nested kwin_wayland properly.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2201
Some error conditions did not have a warning, so all we got is
"Could not initialize rendering context". Which is not helpful to
figure out what is going wrong.
