Effects are given the interval between two consecutive frames. The main
flaw of this approach is that if the Compositor transitions from the idle
state to "active" state, i.e. when there is something to repaint,
effects may see a very large interval between the last painted frame and
the current. In order to address this issue, the Scene invalidates the
timer that is used to measure time between consecutive frames before the
Compositor is about to become idle.
While this works perfectly fine with Xinerama-style rendering, with per
screen rendering, determining whether the compositor is about to idle is
rather a tedious task mostly because a single output can't be used for
the test.
Furthermore, since the Compositor schedules pointless repaints just to
ensure that it's idle, it might take several attempts to figure out
whether the scene timer must be invalidated if you use (true) per screen
rendering.
Ideally, all effects should use a timeline helper that is aware of the
underlying render loop and its timings. However, this option is off the
table because it will involve a lot of work to implement it.
Alternative and much simpler option is to pass the expected presentation
time to effects rather than time between consecutive frames. This means
that effects are responsible for determining how much animation timelines
have to be advanced. Typically, an effect would have to store the
presentation timestamp provided in either prePaint{Screen,Window} and
use it in the subsequent prePaint{Screen,Window} call to estimate the
amount of time passed between the next and the last frames.
Unfortunately, this is an API incompatible change. However, it shouldn't
take a lot of work to port third-party binary effects, which don't use the
AnimationEffect class, to the new API. On the bright side, we no longer
need to be concerned about the Compositor getting idle.
We do still try to determine whether the Compositor is about to idle,
primarily, because the OpenGL render backend swaps buffers on present,
but that will change with the ongoing compositing timing rework.
The main advantage of SPDX license identifiers over the traditional
license headers is that it's more difficult to overlook inappropriate
licenses for kwin, for example GPL 3. We also don't have to copy a
lot of boilerplate text.
In order to create this change, I ran licensedigger -r -c from the
toplevel source directory.
Summary:
We build some objects several times which makes it uncomfortable to develop KWin
since every time we modify something a lot of things get rebuilt. This should
help a bit although it doesn't solve all the problems.
Test Plan: Builds, tests pass
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: davidedmundson, zzag, anthonyfieroni, iasensio, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D28445
Summary:
Because KWin is a very old project, we use three kinds of null pointer
literals: 0, NULL, and nullptr. Since C++11, it's recommended to use
nullptr keyword.
This change converts all usages of 0 and NULL literal to nullptr. Even
though it breaks git history, we need to do it in order to have consistent
code as well to ease code reviews (it's very tempting for some people to
add unrelated changes to their patches, e.g. converting NULL to nullptr).
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson, romangg
Reviewed By: #kwin, davidedmundson, romangg
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23618
We have lots of inconsistency at the moment in CMakeLists.txt files. Most
of it is due to kwin being a very old project. This change hopefully fixes
all of it.
Summary:
Currently code base of kwin can be viewed as two pieces. One is very
ancient, and the other one is more modern, which uses new C++ features.
The main problem with the ancient code is that it was written before
C++11 era. So, no override or final keywords, lambdas, etc.
Quite recently, KDE compiler settings were changed to show a warning if
a virtual method has missing override keyword. As you might have already
guessed, this fired back at us because of that ancient code. We had
about 500 new compiler warnings.
A "solution" was proposed to that problem - disable -Wno-suggest-override
and the other similar warning for clang. It's hard to call a solution
because those warnings are disabled not only for the old code, but also
for new. This is not what we want!
The main argument for not actually fixing the problem was that git
history will be screwed as well because of human factor. While good git
history is a very important thing, we should not go crazy about it and
block every change that somehow alters git history. git blame allows to
specify starting revision for a reason.
The other argument (human factor) can be easily solved by using tools
such as clang-tidy. clang-tidy is a clang-based linter for C++. It can
be used for various things, e.g. fixing coding style(e.g. add missing
braces to if statements, readability-braces-around-statements check),
or in our case add missing override keywords.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, apol, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22371
Summary:
QRegion::rects was deprecated in Qt 5.11. It is advised to use begin()
and end() methods instead.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22353
Summary:
The new connect syntax has several advantages over the old syntax:
(a) Connecting with the new syntax is faster;
(b) It is compile time checked.
There are still a few places where the old connect syntax is used, e.g.
connecting to QML buttons in the Desktop Grid effect.
Test Plan:
Have been testing this patch for ~2 weeks, haven't noticed any
regressions.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, broulik, graesslin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18368
Summary:
By changing all kcfg to have arg="true" we can pass in the same
KSharedConfigPtr into all effects. This allows to have fake config in
the tests and in the planned effect demo mode.
Also it means that we don't have to hardcode the name kwinrc into the
files. In the configs - where we cannot access the effectshandler - we
use the define KWIN_CONFIG which gets generated based on the compile
time arguments.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3571
This removes all the hacks to add kwin4_effect_ to the name of the Effect
and adjusts the desktop files of the effect configuration's parent
component.
Note: the scripted effects still start with kwin4_effect_ prefix.
REVIEW: 117367
All KCMs and KWin core use the BuiltInEffects namespace to find and
interact with the effects. There is no information left in the desktop
file which are of usage. Thus they can be removed.
So far the effects could just use the connection() and rootWindow()
provided by kwinglobals. Thus an internal detail from KWin core is
accessed directly.
To be more consistent with the rest of the API it's wrapped through the
EffectsHandler and with a convenient method in Effect.
The connection() is provided as xcbConnection() to free the very generic
name connection which could create confusion once we provide a wayland
connection to the Effects.
The rootWindow() is provided as x11RootWindow() to indicate that it is
for the X11 world.
REVIEW: 117597
This method replaces the X-KDE-ORDERING property in the Effect's desktop
files. This change is a preparation step for integrating the new Effect
Loader which doesn't read the ordering information. Thus it needs to be
provided by the Effect itself so that the EffectsHandler can properly
insert it into the chain.
Also for the built-in Effects on the long run it doesn't make much sense
to install the desktop files. And binary plugin effects will migrate to
json metadata which also doesn't have the KService::Ptr. Thus overall it
simplifies to read this information directly from the Effect.
Most is just switched to the ::read(). That should be enough for all the
Effects which have a KSharedConfig::Ptr underneath. If not we just need
to find a good place to put the reload.
Instead of using EffectsHandler::sendReloadMessage we generate the dbus
interface in each plugin and call the reconfigure slot directly. That way
it's more type safe and we don't need to link kwineffects from the
configs.
REVIEW: 116875
There are no advantages for the effects KCM to have all the effect
config modules in one plugin.
By having a plugin per effect we can use the KPluginTrader to easily
find the configuration plugin for a given effect and load it.
To make this possible the following changes are done:
* config_builtins.cpp is deleted
* add_subdirectory is used for all effects which have a config module
* toplevel CMakeLists.txt contains the sources again for the effects
which have a config module, but effects which don't have a config
module are still included and thus the macro is still used
* plugin created for the config module, name pattern is:
kwin_effectname_config
* plugin installed to ${PLUGIN_INSTALL_DIR}/kwin/effects/configs
* desktop file adjusted to new plugin name and keyword removed
* desktop file converted to json as meta data and no longer installed
* Uses K_PLUGIN_FACTORY_WITH_JSON
* Macros for config are dropped from kwineffects.h
REVIEW: 116854
As all effects have always been compiled into the same .so file it's
questionable whether resolving the effects through a library is useful
at all. By linking against the built-in effects we gain the following
advantages:
* don't have to load/unload the KLibrary
* don't have to resolve the create, supported and enabled functions
* no version check required
* no dependency resolving (effects don't use it)
* remove the KWIN_EFFECT macros from the effects
All the effects are now registered in an effects_builtins file which
maps the name to a factory method and supported or enabled by default
methods.
During loading the effects we first check whether there is a built-in
effect by the given name and make a shortcut to create it through that.
If that's not possible the normal plugin loading is used.
Completely unscientific testing [1] showed an improvement of almost 10
msec during loading all the effects I use.
[1] QElapsedTimer around the loading code, start kwin five times, take
average.
REVIEW: 115073
