Effects are given the interval between two consecutive frames. The main
flaw of this approach is that if the Compositor transitions from the idle
state to "active" state, i.e. when there is something to repaint,
effects may see a very large interval between the last painted frame and
the current. In order to address this issue, the Scene invalidates the
timer that is used to measure time between consecutive frames before the
Compositor is about to become idle.
While this works perfectly fine with Xinerama-style rendering, with per
screen rendering, determining whether the compositor is about to idle is
rather a tedious task mostly because a single output can't be used for
the test.
Furthermore, since the Compositor schedules pointless repaints just to
ensure that it's idle, it might take several attempts to figure out
whether the scene timer must be invalidated if you use (true) per screen
rendering.
Ideally, all effects should use a timeline helper that is aware of the
underlying render loop and its timings. However, this option is off the
table because it will involve a lot of work to implement it.
Alternative and much simpler option is to pass the expected presentation
time to effects rather than time between consecutive frames. This means
that effects are responsible for determining how much animation timelines
have to be advanced. Typically, an effect would have to store the
presentation timestamp provided in either prePaint{Screen,Window} and
use it in the subsequent prePaint{Screen,Window} call to estimate the
amount of time passed between the next and the last frames.
Unfortunately, this is an API incompatible change. However, it shouldn't
take a lot of work to port third-party binary effects, which don't use the
AnimationEffect class, to the new API. On the bright side, we no longer
need to be concerned about the Compositor getting idle.
We do still try to determine whether the Compositor is about to idle,
primarily, because the OpenGL render backend swaps buffers on present,
but that will change with the ongoing compositing timing rework.
The following click behaviors are defined:
* Switch desktop and activate window [default]
* Switch desktop only
The former emulates the previous default of activating clicked windows
using the Present Windows effect. The latter introduces a new mode where
the clicked window is not activated, allowing the user to select a
virtual desktop without worrying about disrupting the last active
window.
The configuration toggle that controlled the use of the Present Windows
effect has been subsumed into the first click behavior, i.e., if the
effect is enabled, it will be implicitly triggered.
The main advantage of SPDX license identifiers over the traditional
license headers is that it's more difficult to overlook inappropriate
licenses for kwin, for example GPL 3. We also don't have to copy a
lot of boilerplate text.
In order to create this change, I ran licensedigger -r -c from the
toplevel source directory.
Summary:
We build some objects several times which makes it uncomfortable to develop KWin
since every time we modify something a lot of things get rebuilt. This should
help a bit although it doesn't solve all the problems.
Test Plan: Builds, tests pass
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: davidedmundson, zzag, anthonyfieroni, iasensio, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D28445
Summary:
Use windowFrameGeometryChanged rather than windowGeometryShapeChanged
because we are interested only in frame geometry changes.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D26908
Summary:
Lots of red, does the same thing in a simplified way avoiding creating a
real window and having to hack round it.
Test Plan: Click add and remove, remove button disables appropriately
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: meven, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D26381
Summary:
Won't make things go much faster since everything that was
being passed by value is refcounted but still const & is a bit faster
than refcounting
For shared pointers instead of adding const & we move them into the
destination variable saving some cpu usage but at the same time making
clear the pointer is being stored by not being const &
Reviewers: zzag
Reviewed By: zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D25022
Summary:
Because KWin is a very old project, we use three kinds of null pointer
literals: 0, NULL, and nullptr. Since C++11, it's recommended to use
nullptr keyword.
This change converts all usages of 0 and NULL literal to nullptr. Even
though it breaks git history, we need to do it in order to have consistent
code as well to ease code reviews (it's very tempting for some people to
add unrelated changes to their patches, e.g. converting NULL to nullptr).
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson, romangg
Reviewed By: #kwin, davidedmundson, romangg
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23618
We have lots of inconsistency at the moment in CMakeLists.txt files. Most
of it is due to kwin being a very old project. This change hopefully fixes
all of it.
Summary:
This has been commented out since 2014, I doubt it will come back.
This is a big amount of code, maintenance will be easier without it.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: romangg, graesslin, kwin
Tags: #kwin, #documentation
Differential Revision: https://phabricator.kde.org/D23069
Summary:
Currently code base of kwin can be viewed as two pieces. One is very
ancient, and the other one is more modern, which uses new C++ features.
The main problem with the ancient code is that it was written before
C++11 era. So, no override or final keywords, lambdas, etc.
Quite recently, KDE compiler settings were changed to show a warning if
a virtual method has missing override keyword. As you might have already
guessed, this fired back at us because of that ancient code. We had
about 500 new compiler warnings.
A "solution" was proposed to that problem - disable -Wno-suggest-override
and the other similar warning for clang. It's hard to call a solution
because those warnings are disabled not only for the old code, but also
for new. This is not what we want!
The main argument for not actually fixing the problem was that git
history will be screwed as well because of human factor. While good git
history is a very important thing, we should not go crazy about it and
block every change that somehow alters git history. git blame allows to
specify starting revision for a reason.
The other argument (human factor) can be easily solved by using tools
such as clang-tidy. clang-tidy is a clang-based linter for C++. It can
be used for various things, e.g. fixing coding style(e.g. add missing
braces to if statements, readability-braces-around-statements check),
or in our case add missing override keywords.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, apol, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22371
Summary:
The screenlock fails on X11 if it can't grab the keyboard.
We can't nicely solve the generic case. We can solve the common case of
a kwin effect being active.
It's not critical, arguably not even desirable to have these effects
persist after the screen is locked through an external trigger. We can
just close the effect early.
Key grabs have to be relased early before the close animation completes
so that the locker doesn't have a race based on animation times.
It's not ideal, but no worse than the current state for not much work.
BUG: 234153
Test Plan:
locked screen on a timer
opened various effects
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: ngraham, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D20890
Summary:
Currently, the Desktop Grid effect tries to copy a client when user
moves it. But on X11 such behavior doesn't make sense because
a client can't be on multiple desktops (except on all).
BUG: 404442
FIXED-IN: 5.15.1
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19116
Summary:
The new connect syntax has several advantages over the old syntax:
(a) Connecting with the new syntax is faster;
(b) It is compile time checked.
There are still a few places where the old connect syntax is used, e.g.
connecting to QML buttons in the Desktop Grid effect.
Test Plan:
Have been testing this patch for ~2 weeks, haven't noticed any
regressions.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, broulik, graesslin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18368
Summary:
As setDesktop was changed to "move" this left unSetDesktop non-symetric.
This replaces it with explicit API to enter/leave.
This also moves new API to the new object based API rather than still
using ints.
Where numbers are used it has been tidied up so that desktop IDs are
uint, which should be used when we have a list of desktops.
int is used only when we have either a desktop ID or NET::OnAllDesktops
(-1)
Effects API cleared up to use this and use a set of x11 IDs, which
avoids any potential complications of handling add and removes any
ambiguity with what happens if you leave all desktops and such.
Test Plan:
testVirtualDesktops passes (with pending kwayland patch)
Moving a window in the desktop grid on X11 behaves
Moving a window in the desktop grid on wayland behaves
Reviewers: #kwin, zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16704
Summary:
implement virtual desktop support for Wayland.
use the new virtual desktop protocol from D12820
The VirtualDesktopManager class needed some big change in order
to accomodate it, which is where most changes are.
Other than that, it's mostly connections to wire up
VirtualDesktopsManager and VirtualDesktopsManagement(the wayland protocol impl)
Depends on D12820
Other notable detail, is the client visibility updated to reflect the presence
of the client in the plasmavirtualdesktop.
(and the unSetDesktop concept)
Test Plan: used a bit a plasma session together with D12820, D13748 and D13746
Reviewers: #plasma, #kwin, graesslin, davidedmundson
Reviewed By: #plasma, #kwin, davidedmundson
Subscribers: hein, zzag, davidedmundson, kwin
Tags: #kwin
Maniphest Tasks: T4457
Differential Revision: https://phabricator.kde.org/D13887
Summary:
If you activate the Present Windows effect and then the Desktop Grid,
you'll be able to see the close button from PW. The reason for that is
PW doesn't destroy the close button and DG doesn't filter it out.
This patch addesses this problem by syncing DesktopGridEffect::isRelevantWithPresentWindows
with PresentWindowsEffect::isSelectableWindow.
On X11, the close button is filtered by the isSpecialWindow check. On
Wayland, the close button is filtered by the acceptsFocus check.
The proposed solution is kinda hack-ish, but on the other hand, we have
to keep those two methods in sync anyway.
In addition to the close button, notifications won't be displayed too.
BUG: 364710
FIXED-IN: 5.14.3
Test Plan:
* Activate the Present Windows effect;
* Activate the Desktop Grid effect;
* (the close button is no longer visible)
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16513
Summary:
Currently, when the user is moving a window in the desktop grid it is drawn from
the paintScreen function to ensure it appears above all other windows. However,
when drawing the window, the screenProjectionMatrix for the WindowPaintData structure
is never specified. Because of this, the window will not be visible if OpenGL
compositing along with Lanczos scaling are in use since its coordinates will never
be projected into screen-space (unless the window is maximized, in which case the
scaling code is bypassed).
BUG: 361371
BUG: 364509
FIXED-IN: 5.14.3
Test Plan:
Ensure OpenGL compositing is enabled and the scaling method is set to "Accurate" on
hardware supporting this option. Additionally, ensure the desktop grid effect is
active and is configured to use Present Windows. Open a window and ensure is it not
maximized. Click on the window and drag it around - its contents should remain visible
the entire time and follow the mouse.
Reviewers: #kwin, zzag, graesslin, davidedmundson
Reviewed By: #kwin, zzag, davidedmundson
Subscribers: broulik, davidedmundson, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16430
Summary:
If the Desktop Grid effect doesn't use the Present Windows effect to
layout windows, windowAt helper can return a window that doesn't belong
to current activity because it doesn't check whether that window belongs
to current activity.
This change addresses that problem by adding corresponding check.
BUG: 301447
FIXED-IN: 5.13.4
Test Plan:
//Unchecked "Use Present Windows effect to layout the windows".//
* Switched to activity #1
* Switched to virtual desktop #1
* Launched Konsole and maximized it(to increate hit area)
* Switched to activity #2
* Switched to virtual desktop #2
* Launched Dolphin and maximized it
* Activated the Desktop Grid effect, clicked on virtual desktop #1 (activity #2 is still active)
* Switched to activity #1
* Activated the Desktop Grid effect, clicked on virtual desktop #2 (activity #1 is still active)
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14046
Summary:
Currently, effects like Maximize, Slide Back have problems with setting
WindowForceBlurRole. They store previous state of WindowForceBlurRole.
This is wrong. Instead they should either ignore previous state of
WindowForceBlur or refcount forced role.
There's no need for refcounting right now. For example, if several effects
force blur or background contrast, they are most likely in a conflict.
Please notice that the Desktop Grid effect uses the Present Windows
effect only to calculate transformations.
Some other problems with the code that sets WindowForceBlurRole:
* Maximize effect stores previous state of WindowForceBlurRole only
for one window. It ignores the fact that there could be several
active maximize animations;
* Desktop Grid/Present Windows/Slide back don't clean after themselves.
So, after using those effects for good amount of times, memory usage
will bump.
Test Plan:
* Enabled blur for Konsole
* Maximized Konsole
* Activated Present Windows
* Activated Desktop Grid
* Raised another window(to trigger Slide Back)
Reviewers: #kwin, fredrik
Reviewed By: fredrik
Subscribers: fredrik, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13479
Summary:
Apparently some old configs made PresentWindows register the top left
corner which does not make any sense as that's not supported by touch.
So to be sure, don't register those edges.
BUG: 383797
FIXED-IN: 5.11
Test Plan: Not tested, I'm on Wayland
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7508
