This change introduces a new component - ColorManager that is
responsible for color management stuff.
At the moment, it's very naive. It is useful only for updating gamma
ramps. But in the future, it will be extended with more CMS-related
features.
The ColorManager depends on lcms2 library. This is an optional
dependency. If lcms2 is not installed, the color manager won't be built.
This also fixes the issue where colord and nightcolor overwrite each
other's gamma ramps. With this change, the ColorManager will resolve the
conflict between two.
Effects are given the interval between two consecutive frames. The main
flaw of this approach is that if the Compositor transitions from the idle
state to "active" state, i.e. when there is something to repaint,
effects may see a very large interval between the last painted frame and
the current. In order to address this issue, the Scene invalidates the
timer that is used to measure time between consecutive frames before the
Compositor is about to become idle.
While this works perfectly fine with Xinerama-style rendering, with per
screen rendering, determining whether the compositor is about to idle is
rather a tedious task mostly because a single output can't be used for
the test.
Furthermore, since the Compositor schedules pointless repaints just to
ensure that it's idle, it might take several attempts to figure out
whether the scene timer must be invalidated if you use (true) per screen
rendering.
Ideally, all effects should use a timeline helper that is aware of the
underlying render loop and its timings. However, this option is off the
table because it will involve a lot of work to implement it.
Alternative and much simpler option is to pass the expected presentation
time to effects rather than time between consecutive frames. This means
that effects are responsible for determining how much animation timelines
have to be advanced. Typically, an effect would have to store the
presentation timestamp provided in either prePaint{Screen,Window} and
use it in the subsequent prePaint{Screen,Window} call to estimate the
amount of time passed between the next and the last frames.
Unfortunately, this is an API incompatible change. However, it shouldn't
take a lot of work to port third-party binary effects, which don't use the
AnimationEffect class, to the new API. On the bright side, we no longer
need to be concerned about the Compositor getting idle.
We do still try to determine whether the Compositor is about to idle,
primarily, because the OpenGL render backend swaps buffers on present,
but that will change with the ongoing compositing timing rework.
There were multiple other cases of placing the mouse between screens at
the start of tests. It seems to be all copy paste.
Only maximise and pointerConstraints were failing before this, but we
may as well fix all of them.
Night Color adjusts the color temperature based on the current time in
your location. It's not a generic color correction module per se.
We need a central component that can be used by both night color and
colord integration to tweak gamma ramps and which will be able to
resolve conflicts between the two. The Night Color manager cannot be
such a thing because of its very specific usecase.
This change converts Night Color into a plugin to prepare some space for
such a component.
The tricky part is that the dbus api of Night Color has "ColorCorrect"
in its name. I'm afraid we cannot do that much about it without breaking
API compatibility.
A plugin may need to access kwinApp() or kwinApp()->platform() during
tear down, but the problem is that plugins are destroyed after the
kwinApp() object. The plugin manager must be destroyed explicitly while
the application is still valid to ensure that no crash will occur
during compositor teardown.
xdgshell allows clients to specify which output should we fill on
set_fullscreen. This change takes this request into consideration
instead of ignoring it.
The scripting api is not suitable for implementing all features that
should not be implemented in libkwin. For example, the krunner
integration or screencasting are the things that don't belong to be
compiled right into kwin and yet we don't have any other choice.
This change introduces a quick and dirty plugin infrastructure that
can be used to implement things such as colord integration, krunner
integration, etc.
Without the KWindowSystem integration plugin, Wayland experience will be
negatively affected because windows created by kwin itself won't behave
as desired. Therefore it makes little sense to load this plugin at runtime.
QTRY_COMPARE doesn't work well with how we do our wayland event
dispatching.
We know the client hasn't processed any events yet, so we can safely do
a normal wait.
On wayland, we know we're always going to load our internal QPA. Instead
of shipping a plugin and loading it dynamically we can use Qt static
plugins.
This should result in slightly faster load times, but also reduce the
number of moving pieces for kwin.
This also prevents anyone outside kwin loading our QPA which wouldn't
have made any sense and just crashed.
A window id generated by WaylandServer may reference an X11 window
with the same id, which can result in undefined behavior.
The main reason why we needed windowId() was because of the task
switcher. However, since tabbox uses internal ids now, the window id
property can be dropped.
On Wayland, a surface must be displayed the same way no matter how the
attached buffer is transformed. In order to guarantee that, we build the
surface-to-buffer matrix, which is used to compute the texture coords.
The surface-to-buffer matrix represents an affine transformation. Thus,
performing linear interpolation between texture coordinates won't end up
in corrupted rendered results. This is the main assumption that we make
during generation of contents window quads. After creating a sub-quad,
the new quad's texture coordinates are computed by interpolating between
the source quad's texture coords.
However, WindowQuad::makeSubQuad() makes a concrete assumption about the
order of texture coords, which might be false if the attached wayland
buffer is rotated 90 or 270 degrees.
This issue went unnoticed after merging the viewporter patches because
the developer who was working on it had been using primarily nested
kwin_wayland for testing purposes. And it appears like kwin schedules
full screen repaints even though it supports buffer age. It still needs
some investigation why that happens.
BUG: 428003
SurfaceInterface::inputIsInfinite() has been dropped. If the surface has
no any input region specified, SurfaceInterface::input() will return a
region that corresponds to the rect of the surface (0, 0, width, height).
While the new design is more robust, for example it's no longer possible
to forget to check SurfaceInterface::inputIsInfinite(), it has shown some
issues in the input stack of kwin.
Currently, acceptsInput() will return false if you attempt to click the
server-side decoration for a surface whose input region is not empty.
Therefore, it's possible for an application to set an input region with
a width and a height of 1. If user doesn't know about KSysGuard or the
possibility of closing apps via the task manager, they won't be able to
close such an application.
Another issue is that if an application has specified an empty input
region on purpose, user will be still able click it. With the new
behavior of SurfaceInterface::input(), this is no longer an issue and it
is handled properly by kwin.
Currently, Qt clients send two maximize requests separated by the
initial commit. From spec's perspective, this is totally fine, the
client should receive two configure events with "maximized" state.
But because changeMaximize() in XdgToplevelClient and setMaximized()
operate on two different maximize modes, the second maximize request
will trick kwin into thinking that the client should be restored.
If Xwayland has crashed, the Workspace will block stacking order updates
and start destroying all X11 clients.
Once stacking order updates are unblocked, the Workspace will mark the X
stacking order as dirty and create a new Xcb::Tree object.
We don't want to create that Xcb::Tree object because accessing it
after the XCB connection has been shut down will lead to a crash.
BUG: 427688
FIXED-IN: 5.20.1
VirtualKeyboard class does not implement the relevant VirtualKeyboard
protocol but rather implements the InputMethod protcol and can in theory
be used by other input method like e.g. ibus.
Make class name consistent with what it does to avoid confusion in
future.
For now only rename of main class is done and dbus service is kept as-is
to provide retro-compatibility, when input method protocol is
implemented fully, we can think of what to do wrt the dbus interface
later when we fully implement zwp_input_method_unstable_v1 protocol.
This change replaces the remaining usages of the old connect syntax with
the new connect syntax.
Unfortunately, there are still places where we have to use SIGNAL() and
SLOT() macros, for example the stuff that deals with d-bus business.
Clazy was used to create this change. There were a few cases that needed
manual intervention, the majority of those cases were about resolving
ambiguity caused by overloaded signals.
If the Xwayland executable can't be found, the whole session will die
because a criticalError() signal will be emitted.
This change replaces the criticalError() signal with a less severe
signal.
If the errorOccurred() signal has been emitted during the startup
sequence, kwin won't die and will just continue with spawning the
session process.
After splitting out the server part of KWayland into a separate repo,
all non-core protocol wrappers in KWayland::Client had become obsolete
and using them in new projects is highly discouraged.
QPointer is a really useful way to store a pointer over time.
It doesn't make have any value as a return value used by a short-lived
method.
There isn't a good copy constructor, it's effectively the same as
creating a new QWeakPointer reference that has to be cleaned up.
Testing if something is null is still the same. A new QPointer can be
made by the caller if it actually is needed.
Input handling is a very hot path called many times a frame, so it's
important to keep this light. focus() and at() are called a lot which
added up to slightly over 1% of CPU time when moving the mouse about.
The layer-shell protocol allows wayland clients to create surfaces that
can be used for building desktop environment components such as panels,
notifications, etc.
The support for the plasma-shell protocol will be dropped once plasma in
all its entirety is ported to the layer-shell protocol.
