Summary:
Current implementation of buildQuads assumes that corner shadow tiles
are always present:
const QRectF leftRect(
topLeftRect.bottomLeft(),
bottomLeftRect.topRight());
but that assumption is wrong. For example, if the default panel is on
the bottom screen edge, then the calendar popup won't have the
bottom-left shadow tile(at least on Wayland). Which means that the left
shadow tile won't be visible because
topLeftRect.left() == bottomLeftRect.right().
Corner rectangles only have to influence height of the left/right tile
and width of the top/bottom tile. Width of the left/right tile and
height of the top/bottom tile should not be controlled by corner tiles.
Overall, this is how shadow quads are computed:
* Compute the outer rectangle;
* Compute target rectangle for each corner tile. If some corner tile is
missing, move the target rectangle to the corresponding corner of the
inner shadow rect and set its width and height to 0. We need to do
that to prevent top/right/bottom/left tiles from spanning over
corners:
{F6190219, layout=center, size=full}
We would rather prefer something like this if the top-left tile is
missing:
{F6190233, layout=center, size=full}
* Fix overlaps between corner tiles;
* Compute target rectangles for top, right, bottom, and left tiles;
* Fix overlaps between left/right and top/bottom shadow tiles.
Test Plan:
* Ran tests;
* Resized Konsole to its minimimum size(on X11 and Wayland);
* Opened the calendar popup(on X11 and Wayland):
Before:
{F6190344, layout=center, size=full}
After:
{F6190346, layout=center, size=full}
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: abetts, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14783
Summary:
Let VirtualOutput be a child class of the new generic class Output.
This allows code sharing and a very similar behavior of the Virtual backend
in comparision to the Drm backend.
Test Plan:
Autotests succesful with two exceptions: The decoration input test fails on
testDoubleTap, row topLeft. This is to be expected because now the
ScreenEdgeInputFilter captures the event at position (0,0) before the
DecorationEventFilter can capture it. The autotest was adapted to take this
special case into account.
Also the lockscreen test fails, because the virtual output is currently missing
the physical size yet.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11789
Summary:
In loading tests. Effects are deleted in a deleteLater potentially
outside the scope of our test. Our MockEffectsHandler (which contains
the global static "effects") has the lifespan of the test.
Fixes failing unit test.
Test Plan: Ran test
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15167
stackingOrder is an interesting property which needed
special handling in the port. Add an explicit test.
Test Plan: #kwin
Reviewers: broulik
Reviewed By: broulik
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14533
Summary:
It's superseded by the new scale effect(D13461).
Existing users of this effect will be migrated to the new scale effect.
Depends on D13461
Reviewers: #kwin, #plasma, #vdg, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13462
Summary:
The new effect scales windows as they appear and disappear.
As the the most of window animation effects, it is a monolithic effect,
i.e., if you enable scale effect, it will animate *both* the appearing and
disappearing.
The main difference between the Scale effect and the Scale in effect is
that the Scale in effect only animates windows as they appear. There is
no corresponding "the Scale out" effect, which is odd. Other points that
differentiate the Scale effect from the Scale in effect:
* it is more subtle;
* it doesn't animate the log out screen;
* it doesn't conflict with the Fade effect, etc.
... and overall, the Scale effect supersedes the Scale in effect.
{F5904947}
//Window open animation.//
{F5904948}
//Window close animation.//
{F5905283, layout=center, size=full}
//KCM.//
Test Plan:
* Enabled this effect
* Opened/closed System Settings
Reviewers: #kwin, #plasma, #vdg, davidedmundson
Reviewed By: #kwin, #plasma, #vdg, davidedmundson
Subscribers: ngraham, davidedmundson, fvogt, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13461
Summary:
One cannot use a non metatype frrom an external class inside an
invokable. https://bugreports.qt.io/browse/QTBUG-58454
End result is the script engine arguments wouldn't match up and MOC
would just use the default value.
As far as I can tell this has been broken for 6 years.
The global animate method that unboxes a QJSValue as an object is
unaffected.
No shipped kwin effect actually used it.
To some extent we didn't even actually want to enforce the enum as we
also accept custom value of ScriptedEffect::GuassianCurve, so it has
been switched for an int.
Test Plan: Unit test
Reviewers: #kwin, broulik
Reviewed By: broulik
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14669
Summary:
Ready for QJSEngine port and upcoming other fixes.
Split as it makes it easier to do any before/after testing.
Test Plan:
All tests pass with the current QScriptEngine
Verified expected API against a wiki page and current code.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14482
Summary:
If the new pointer position is "off screen", PointerInputRedirection
just ignores that new position. So, pointer remains on its previous
position. In some particular cases, like reaching default panel, it
degrades desktop experience because one have to slowly move pointer in
order to reach what he/she wants.
This change addresses that problem by confining the new pointer position
to screen geometry.
BUG: 374867
FIXED-IN: 5.13.4
Test Plan: Ran tests
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14036
Summary:
Most effects use QTimeLine in the following manner
```lang=cpp
if (...) {
m_timeline->setCurrentTime(m_timeline->currentTime() + time);
} else {
m_timeline->setCurrentTime(m_timeline->currentTime() - time);
}
```
Because effects do not rely on a timer that QTimeLine has, they can't
toggle direction of the QTimeLine, which makes somewhat harder to write
effects. In some cases that's obvious what condition to use to figure
out whether to add or subtract `time`, but there are cases when it's
not. In addition to that, setCurrentTime allows to have negative
currentTime, which in some cases causes bugs.
And overall, the way effects use QTimeLine is really hack-ish. It makes
more sense just to use an integer accumulator(like the Fall Apart
effect is doing) than to use QTimeLine.
Another problem with QTimeLine is that it's a QObject and some effects
do
```lang=cpp
class WindowInfo
{
public:
~WindowInfo();
QTimeLine *timeLine;
};
WindowInfo::~WindowInfo()
{
delete timeLine;
}
// ...
QHash<EffectWindow*, WindowInfo> m_windows;
```
which is unsafe.
This change adds the TimeLine class. The TimeLine class is a timeline
helper that designed specifically for needs of effects.
Demo
```lang=cpp
TimeLine timeLine(1000, TimeLine::Forward);
timeLine.setEasingCurve(QEasingCurve::Linear);
timeLine.value(); // 0.0
timeLine.running(); // false
timeLine.done(); // false
timeLine.update(420);
timeLine.value(); // 0.42
timeLine.running(); // true
timeLine.done(); // false
timeLine.toggleDirection();
timeLine.value(); // 0.42
timeLine.running(); // true
timeLine.done(); // false
timeLine.update(100);
timeLine.value(); // 0.32
timeLine.running(); // true
timeLine.done(); // false
timeLine.update(1000);
timeLine.value(); // 0.0
timeLine.running(); // false
timeLine.done(); // true
```
Test Plan: Ran tests.
Reviewers: #kwin, davidedmundson, graesslin
Reviewed By: #kwin, davidedmundson, graesslin
Subscribers: romangg, graesslin, anthonyfieroni, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13740
Summary:
This patch changes KWin's pointer constraining behavior by only allowing
constraints if the surface has keyboard focus. In case the client activation
state changes, it rechecks it.
Test Plan:
Manually with the pointer constraints test application and opening the
launcher by pressing meta. Also amended autotest.
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, davidedmundson, kwin
Tags: #kwin
Maniphest Tasks: T8923
Differential Revision: https://phabricator.kde.org/D13492
Summary:
It will then be renderered appropriately when painting to the output
buffer.
Test Plan: Updated unit test, plus used with other relevant patches
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13606
Summary:
Should resolve undefined reference to `bool QTest::qCompare<double, int>
error on 5.9
Test Plan:
Still compiles/passes
Not actually tested on 5.9
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13526
This test is blocking the ability of the CI system to return to service for Extragear projects on some platforms.
This commit may not be reverted without the explicit consent of Sysadmin.
CCMAIL: plasma-devel@kde.org
CCMAIL: kwin@kde.org
Summary:
A client might delete its pointer lock/confinement object. This is supposed to
directly remove the pointer lock/confinement in KWin, but did not explicitly
until now.
BUG: 388885
Test Plan:
Tested manually with Neverball, Nexuiz and the new pointer constraints test
application. The pointer constraints autotest is also appended.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, graesslin, kwin
Tags: #kwin
Maniphest Tasks: T8923
Differential Revision: https://phabricator.kde.org/D13466
Summary:
Instead of seeing the cursor <--> on the left edge you now see an icon
that looks like |<- .
This brings kwin decorations in line with GTK CSD icons.
In theory this is also useful to tell which window will resize in the
case of side-by-side windows (regardless of whether borders are on or
not). In practice with the adwaita icon theme I tested with it's not
very intuitive to realise which is which till you learn the icon.
Change is more involved than it should be as Qt::CursorShape doesn't
have these entries, and I don't want to shadow that enum internally or
have
to change kwin effect code.
Specifics depend on cursor icon theme if they are not present it will
fallback to the <--> icon. (Breeze does not have them currently)
Test Plan:
Resized some windows (on X and on Wayland)
Correct icon appeared on Adwaita
Existing icon appeared on Breeze
Reviewers: #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13396
Summary:
QPainter doesn't render decoration shadows. It renders only
shadows provided through ShadowInterface.
With this change, painting of shadows is done in similar way OpenGL backend is
currently doing.
Before
{F5734867, layout=center, size=full}
After
{F5734870, layout=center, size=full}
Depends on D10811 (dummy decoration with shadows in autotests)
Test Plan:
* start kwin with QPainter backend enabled:
```
KWIN_COMPOSE=Q kwin_wayland --xwayland --windowed
```
* open konsole and kate:
```
DISPLAY=:1 konsole
DISPLAY=:1 kate
```
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: davidedmundson
Subscribers: abetts, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10943
Summary:
This problem appears if shadow corner tiles are too big and
some window has size smaller than 2 * shadowTileSize.
This change tries to address the problem above by exclusing
overlapping tile parts. If there are any two overlapping corners
then tile between them(top/right/bottom/left) is not rendered.
Also, because some corner tile parts can be excluded, corner tiles
are expected to be symmetrical(i.e. if we remove right half from
the top-left tile and left half from the top-right tile and
stick them together, they still look fine, there are no misalignments, etc).
Most shadows(e.g. shadows from Breeze) have such behaviour.
No tiles are overlapping
{F5728514, layout=center, size=full}
Overlapping tiles
{F5728516, layout=center, size=full}
And this is how it supposed to be
{F5728517, layout=center, size=full}
Test Plan:
* apply D11069 to Breeze
* in System Settings/Application Style/Window Decorations, choose "Very Large" shadow size
* open Konsole
* resize it to a minimum possible size
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, ngraham, anemeth, abetts, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10811
Summary:
BUG: 393253
FIXED-IN: 5.13.0
Test Plan: manual testing and new unit test
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12633
Summary:
From Wayland documentation:
"When a seat's focus enters a surface, the pointer image is undefined and
a client should respond to this event by setting an appropriate pointer
image with the set_cursor request."
KWin's interpretation so far for the undefined pointer image was to
remove the pointer image when entering a surface waiting for the client
to set a cursor image. This can result in a short flicker as there might
be a frame without a cursor image.
This patch changes the behavior by keeping the previous image till the
application set a new one. This brings some advantages:
* if the application is not responding a cursor is still shown
* if the same cursor is used as in the previous window we don't have a
flicker
CCBUG: 393639
Test Plan: I cannot see the flicker, so only tested with the adjusted tests
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12631
Test Plan:
Very minimal expansion of unit tests which uses WaylandScreens
Wrote mini app to debug actual output of xdg-output for testing the DRM code
Main relevant user of this is xwayland > 1.20 which I don't have, so that
part remains untested
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: romangg, graesslin, bshah, kwin
Tags: #kwin
Maniphest Tasks: T8501
Differential Revision: https://phabricator.kde.org/D12243
Summary:
When using composite key combinations, kwin would do random weird
actions when the first key was pressed (e.g. ` key). This makes sure we
are not trying to match.
BUG: 390110
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12416
Summary:
When using composite key combinations, kwin would do random weird
actions when the first key was pressed (e.g. ` key). This makes sure we
are not trying to match.
BUG: 390110
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12416
Summary:
Seems to have regressed in Plasma 5.12 due to code reordering. Now the
property is explicitly updated once the NETRootInfo is created.
BUG: 391034
FIXED-IN: 5.12.5
Test Plan:
Test case exposing the problem added. Fails without the patch,
succeeds with the patch.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10836
Summary:
This patch implements using EGL_IMG_context_priority to request
high-priority rendering contexts if the extension is available.
EGL_IMG_context_priority is currently used in this fashion by
e.g. Android's SurfaceFlinger (RenderEngine.cpp) and libweston
(gl-renderer.c) and seems promising given this widespread
acceptance.
Reviewers: #kwin, graesslin, romangg, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11572
Summary:
This matches the DRM backend more closely and allows mid-test removal and
addition of virtual outputs with different properties in the future.
Test Plan: Before and after 93% tests passed.
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11351
Summary:
Especially when a window is first mapped it might be that the appId is
not yet set. So window rule matching doesn't happen. This change
evaluates the window rules again after the appId changes, so rules for
the appId match.
Test Plan: added test case
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11268
Summary:
This allows to override the desktop file name.
CCBUG: 351055
Test Plan: Created a window rule for telegram-desktop to fix the icon
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11266
Summary:
The window rules dialog did not properly detect the wayland windows. So
I investigated what ICCCM writes about the WM_CLASS property (which is
the base for window rule matching) and checked how ShellClient maps to
it. Basically name and class was swapped and the reason for the
detection not working properly. As we don't have a proper name, the code
is adjusted to generate a name by using the executable name. This is
also what WM_CLASS should be filled with, according to ICCCM.
Test Plan: Rules dialog detects the name and class correctly
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11023
Summary:
When one uses:
* breeze as of 5.12
* wobbly windows
* shaded window
* a distribution building with assert enabled
and starts to move a shaded window, KWin asserts. The root cause for
this is that WindowQuad::makeSubQuad has an assert for y1 being smaller
than y2. With the combination listed above this is not guaranteed. For
the left shadow quad the y1 and y2 are identical and thus trying to
split it, results in the assert condition.
The problem of the shadow quad having an invalid size might be addressed
as well with D10811. Due to that the generation of the quads is not
touched. Instead a sanity check is introduced to not try to split
already invalid sized quads.
BUG: 390953
FIXED-IN: 5.12.3
Test Plan: Added unit test hit the assert, now doesn't hit it any more
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11015
Summary:
If the cursor theme failed to create KWin crashed due to an endless
recursion. There are two reasons for this fault:
1) When the physical size does not exist we perform a division by 0
which results in an invalid size going into wl_cursor_theme_load
2) We emit the signal that the cursor theme changed even if it didn't
change thus creating an endless recursion
This change addresses both problems: it checks that the size is not 0
and changes the handling for theme update to only destroy the previous
theme if the new theme could be created and only emits the signal if
things change.
BUG: 390314
FIXED-IN: 5.12.3
Test Plan: Added a new test case which crashed with old code
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10549
Summary:
This fixes the problem that alt+lmb did not start unrestricted move
resize for the Debug Console.
BUG: 374880
FIXED-IN: 5.12.3
Test Plan: New test case and manual testing whether alt+lmb/rmb works
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10440
Summary:
On touch down a first hover motion is sent to the decoration. Thus e.g. a
button enters the hovered state. On touch release so far the decoration
did not get a leave event resulting in the button still being hovered.
This change ensures the leave event is sent or if the pointer is also on
the decoration a motion to the pointer position is sent.
BUG: 386231
FIXED-IN: 5.12.3
Test Plan:
New test case and manual testing to verify that the maximize
button is no longer hovered after touch down/up on it
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10308
Summary:
If the window never provides the appId, we would not get an icon for
the window. This happens for example for KWin's internal windows which
don't set the app id as KWin also doesn't have a desktop file. With this
change the DebugConsole has a window icon in the decoration.
Test Plan: Extended tests and manual verification of DebugConsole
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10294
Summary:
When a window was being moved the touch handling performed the wrong
interaction. Due to that it was possible to move the window, but KWin
did not enter the correct code paths, thus quick tiling was for example
not functional.
BUG: 390113
FIXED-IN: 5.12.3
Test Plan: New test case added and manual test in nested KWin
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10431
This is the first test for force rules. As those cannot be set through
the temporary rules message the rulesrc must be modified. To support this
RuleBook gained a setConfig method.
To my positive surprise the rules already work as intended.
Summary:
The main reason for not having it as a mandatory dependency was that BSD
doesn't support it. But as I learned recently it is available on our CI
system. So BSDs have support now.
Even more it showed that the code doesn't compile if the dependency is
missing. And there's one thing I hate: broken build configuration
options.
So let's make UDEV and libinput a required dependency and get rid of the
problems.
Test Plan: Compiles
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10057
Summary:
We send out too many configure requests when finishing move resize which
also triggers quick tiling. This change addresses the problem of the too
many configure requests by making the configure method check whether
geometry updates are blocked. And to make this work properly for the end
of finish move resize the complete method is wrapped in a geometry
update blocker.
BUG: 388072
FIXED-IN: 5.12.1
Test Plan:
Quick tiling test passes, both Wayland and X11 windows are
quick tiled correctly.
Reviewers: #kwin, #plasma, jgrulich
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10156
Summary: This implements these set rules for ShellClient.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9870
Summary: This adds support for those set rules in ShellClient.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9866
Summary:
The renderer string does not contain "Gallium 0.4 on" anymore,
instead it directly contains the gallium driver's name.
So assume that every unknown renderer is a gallium driver.
Test Plan: Added a testcase, it succeeds only with this patch.
Reviewers: #plasma, graesslin
Subscribers: kwin, plasma-devel, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9495
Summary:
So far a not-active fullscreen X11 window was kept in the active layer if
the newly activated window is in the same group (that is same client
leader). For example a fullscreen X11 kwrite window is in the active layer
if another kwrite window is active. The two kwrite windows obviously
don't have anything to do with each other, but are in the same group.
This creates problems as it's not possible to raise other windows above
the active not-fullscreen kwrite window. E.g. the panel is stacked below.
The idea behind the check makes sense: if a fullscreen window opens
another window (e.g. a configuration dialog) it should not be put back
to normal layer. Thus the check is adjusted whether the new active
window is a transient to the fullscreen window. Thus the intention is
still the same, but does not cause the problems.
As the code now does not need to differentiate between X11 and Wayland
windows (group only on X11) the Client specific implementation is
removed and the method unvirtual'ed.
BUG: 388310
FIXED-IN: 5.12.0
Test Plan: Test passes
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9699
Summary:
This change introduces a new SwitchEvent and passes it through the
InputEventSpy and InputEventFilter. The DebugConsoleFilter implements it
so that the events can be monitored in the debug console.
Test Plan: Untested as my only device with such switches has too old libinput
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9521
When an X11 window is raised to fullscreen it gets set to active layer.
When another window gets activated then it goes back to normal layer.
But when a window of the same group gets activated the fullscreen window
stays in the active layer. Due to that it is not possible to raise other
windows above the fullscreen window.
This just adds a test case exposing the problematic area.
CCBUG: 388310
Summary:
This change adds support for the switch devices introduces with libinput
1.7 (lid) and 1.9 (tablet mode). So far it's not yet used internally in
KWin, but only exposed through the Device and Events.
As KWin currently only requires libinput 1.5 and we are rather late in
the release cycle the new functionality is ifdef'ed. The requirement
will be raised once master is 5.13. It is already available on
build.kde.org, but e.g. Neon only has 1.6.
The switch events are interesting as they report whether the lid is
closed (might be interesting for e.g. powerdevil) and whether a
convertible is in tablet mode (supported for e.g. Lenovo Yogas with
recent kernel). This can be used by KWin internally to enable/disable
the virtual keyboard. And can be exposed globally to switch to Plasma
Mobile shell in future.
Test Plan:
Only through test case as my Lenovo Yoga uses Neon which has a
too old libinput
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9516
Summary:
The initial state for user enabled is now read from config. In addition
a DBus interface is provided exporting this property. This allows
KScreen to determine whether automatic screen rotation is available and
whether the user has it enabled or not.
Furthermore KScreen can change the property and this gets stored into
the configuration. Thus KScreen can offer a user interface to
enable/disable automatic screen rotation as well as enabling/disabling
the manual rotation based on the current user settings.
Test Plan:
Not yet tested, coded on the system which doesn't have an
orientation sensor
Reviewers: #kwin, #plasma, sebas, davidedmundson
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8738
Summary:
This change finds the screen for a touch screen device based on:
* number available screens
* output name defined on the touch screen device
* internal screen
* and physical size
The id of the screen is stored in the Device allowing to adjust the
touch points accordingly. This means instead of transferring to the
combined display size the touch points are transferred into the output
space and the position of the output is added. Thus in a multi screen
system the touch points are properly mapped to the output.
Furthermore the screen orientation is passed to the Device and a
calibration matrix is set accordingly. Thus a transformed screen has the
touch screen transformed accordingly.
Please note that this only affects libinput on Wayland and not on X11!
The x11 standalone platform needs to gain similar code.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8748
Plus test
Test Plan:
Ran kwin with menus and patched QPT
Ran test
Reviewers: graesslin
Reviewed By: graesslin
Subscribers: graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9262
With Wayland KWin needs to provide certain services, which were provided
before that by the Xserver. One of these is gamma correction, which includes
the - by many people beloved - functionality to reduce the blue light at
nighttime. This patch provides the KWin part of that. It is self contained,
but in the end will work in tandem with a lib in Plasma Workspace and a KCM
in Plasma Desktop, which can be used to configure Night Color.
* Three modi:
** Automatic: The location and sun timings are determined automatically
(location data updates will be provided by the workspace)
** Location: The sun timings are determined by fixed location data
** Timings: The sun timings are set manually by the user
* Color temperature value changes are smoothly applied:
** Configuration changes, which lead to other current values are changed
in a quick way over a few seconds
** Changes on sunrise and sunset are applied slowly over the course of few
minutes till several hours depending on the configuration
* The current color value is set immediately at startup or after suspend
phases and VT switches. There is no flickering.
* All configuration is done via a DBus interface, changed values are tested
on correctness and applied atomically
* Self contained mechanism, speaks directly to the hardware by setting the
gamma ramps on the CRTC
* Currently working on DRM backend, extensible to other platform backends in
the future
* The code is written in a way to make the classes later easily extendable to
also provide normal color correction, as it's currently done by KGamma on X
Test Plan:
Manually with the workspace parts and added integration tests in KWin using
the virtual backend.
BUG:371494
Reviewers: #kwin, graesslin
Subscribers: kwin, plasma-devel, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5928
Summary:
The regression got introduced with 9934f5b575.
The order when setMaximize(false, false) was called changed in regard to
when the quick tiling mode was adjusted. But just changing the ordering
back was no solution as that would cause regressions in other areas
(unit tests fail).
This change builds up on the support for geometry update blocker on
Wayland to be able to better support this situation without causing
further regressions.
Also this change rethinks the code area. There is an idea behind
temporarily setting the quick tile mode to none and that is even
documented in a comment: it should not confuse maximize. So let's do
exactly that: call the maximize in the block where the quick tile
mode is temporarily wrong. As that is only one branch the else branch
performs the same steps.
BUG: 376104
FIXED-IN: 5.12.0
Test Plan: Confirmation in bug report that patch fixes issue
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9178
Summary:
A small helper class is added which manages inhibiting idle for the
ShellClients. So far only very basic functionality is added. That is
only the inhibition on the Surface is followed. It is not yet checked
whether the ShellClient is visible at all. That needs some changes in
ShellClient.
BUG: 385956
FIXED-IN: 5.12
Test Plan: New test case passes
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8856
Summary:
KWin was quite good in ensuring that you don't need to install by
passing paths to the tests. The new way is much nicer, so code is
adjusted for the new way. Also if we require a newer ECM in future we
need to support the new way.
No guarantee that the tests don't pick something up from the system env,
that needs more testing.
References: https://community.kde.org/Guidelines_and_HOWTOs/Making_apps_run_uninstalled
Test Plan: The tests which loaded helpers pass
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7543
Summary:
Without Xwayland KWin starts so fast that the creation of the EffectFrame
triggers a crash in the Wayland integration as the KWin internal
connection isn't fully setup.
To workaround this crash the creation of the EffectFrame is delayed till
the first usage. It doesn't make sense to try to fix the actual crash as
it would require to defer the creation of all Effects.
Test Plan: New test case added which crashes without this fix.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8821
Summary:
The addition of the test infrastructure is motivated by the regressions
caused by adding mode switching and transformation support.
A contributing factor to these regression is the fact that the DRM
platform does not have any tests. It is difficult to test this code as
it needs to work with hardware, thus we cannot use the real DRM library.
Instead we need to use mocking.
This change sets up some first basic tests with the help of a mockDrm
library. In order to better test the code as units the Drm classes are
slightly refactored. Most importantly the dependency to DrmBackend is
removed wherever possible and replaced by a simple int fd which is mostly
the only element used by the classes.
This first test introduces basic testing of a DrmObject. It is intended
to extend this to at least also test DrmPlane as a central piece of our
Drm platform plugin. This will also extend the tests of DrmObject.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8776
Summary: Fixes the build with D8705
Test Plan: Just adds includes, I wonder if it should go into Plasma/5.8 and /5.11 too
Reviewers: #plasma, davidedmundson
Reviewed By: #plasma, davidedmundson
Subscribers: graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8706
Summary:
On X11 modifier+mouse button on the window decoration triggers the
"special" handling thus as unrestricted move instead of passing the click
to the decoration. Of course on Wayland we want to have the same
functionality.
BUG: 386708
FIXED-IN: 5.11.4
Test Plan: New test case added. PointerInputTest still passes.
Reviewers: #kwin, #plasma, broulik
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8758
Summary:
So far ShellClient did not support that the user can set a window to
fullscreen. This was omitted in the initial implementation as WlShell
doesn't support passing the state back to the surface.
With XdgShell this problem doesn't exist any more and we can implement
it. The implementation is mostly based on the one for Client and
adjusted for the Wayland world.
Test Plan:
New test cases and manual testing (send kate and kwrite to
fullscreen through alt+f3 menu)
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8169
Summary:
This change introduces an OrientationSensor class which wraps a
QOrientationSensor. The OrientationSensor is hold by Screens and gets
enabled if Screens knows about an internal (e.g. LVDS) display which
supports rotation. In addition the OrientationSensor holds an KSni to
enable/disable the automatic rotation support.
The drm platform plugin is adjusted to make use of the OrientationSensor.
The API is defined in a way that this can also be implemented on other
platforms supporting rotation. Most important are hwcomposer and X11
standalone. The latter should be straight forward as rotation is provided
through XRandR. The former needs addition for rotation support first.
Test Plan: Rotated my Yoga 12
Reviewers: #kwin, #plasma, sebas
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8699
Summary:
The test DontCrashUseractionsMenu (Waylandonly) found an issue in our
screen handling implementation in the QPA. The code exposed a short time
frame between the dummy screen getting destroyed and the first screen
being added. This could result in a crash of KWin.
There is actually no need to implement Screen on top of Wayland screen.
KWin has all the knowledge, so we can also base this on top of the
Screens API.
Advantages:
* no delays due to Wayland roundtrips
* handle screen getting removed (was a TODO)
* handle resolution changes (was a TODO)
The new implementation has a disadvantage that it destroys and readds
all screens whenever something around the screen changes. This shouldn't
be an issue in practice as it's only for the internal QPA and thus only
affects KWin internal windows which is placed in global coordinates
anyway. If it turns out to be a problem we need to track better the
screen changes - so far those were not tracked at all.
Test Plan: Run a few unit tests which change screens
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8345
Summary:
This change sets up ShellClient for supporting window rules by reading
in the rules once it gets created. As a first rule the Apply initially
rule for desktop is implemented.
Currently it is not yet possible to set window rules through the
configuration menu. So far only injecting rules through the test
framework (temporary rules) is implemented. The idea is to first
implement all rules then to expose them to the UI.
Test Plan: New test case
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8177
Summary:
This change adds a DBus API to query whether the virtual keyboard is
currently enabled and provides DBus methods to request that the virtual
keyboard gets enabled/disabled. This is useful for e.g. providing a
Plasmoid or for convertables where the tablet mode needs to be enabled.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8166
Summary:
In a bug report there was a reference that on multi-screen KSplash is
not placed correctly. I investigated and noticed that it is an OSD which
sets an own position. In KWin the events were processed correctly but
the position was off.
The problem is that KWin has code to correct the position of an OSD when
it's size changes. This happens also on first damage and then the window
gets incorrectly placed when the position is set. So honor that the
position is set.
Test Plan: Restarted the session, ksplash positioned correctly now.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8268
Summary:
In 47343fb we made GBM buffer shared.
What we wanted to do was:
Unbox the shared_pointer<GBMSurface> to give us a GBMSurface* object
Call the gbm_surface*() on that operator
Then cast that to a void* for eglCreatePlatformWindowSurfaceEXT
What we did:
Cast the std::shared_ptr<GBMSurface> to a gbm_surface* then cast that
to void*.
This is just a garbage value and it crashes in Mesa when we do our first
paint.
I've replaced that with an explicit method then we can use shared_ptr's
-> operator rather than get() which does the right thing in a readable
way.
Test Plan:
It crashed after rebasing to master (for Aleix too)
No longer crashes
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8251
Summary:
In 47343fb we made GBM buffer shared.
What we wanted to do was:
Unbox the shared_pointer<GBMSurface> to give us a GBMSurface* object
Call the gbm_surface*() on that operator
Then cast that to a void* for eglCreatePlatformWindowSurfaceEXT
What we did:
Cast the std::shared_ptr<GBMSurface> to a gbm_surface* then cast that
to void*.
This is just a garbage value and it crashes in Mesa when we do our first
paint.
I've replaced that with an explicit method then we can use shared_ptr's
-> operator rather than get() which does the right thing in a readable
way.
Test Plan:
It crashed after rebasing to master (for Aleix too)
No longer crashes
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8251
Summary:
The gbm_surface is owned by the EglGbmBackend, but it's not the only one
using it. The DrmSurfaceBuffer is also using it and needs it to destroy
the gbm_bo. Now this can become a problem in the following situation:
* a page flip is still pending
* the EglGbmBackend destroys the gbm_surface
-> when the page flip happens the DrmSurfaceBuffer will try to destroy
the gbm_bo and crash as the gbm_surface is no longer valid. This
situation can happen when switching screens or when switching compositing
backend (OpenGL 2 -> OpenGL 3).
To address this problem a class GbmSurface is added which wrapps the
gbm_surface pointer. The EglGbmBackend creates and holds a shared pointer
to the GbmSurface and passes that one to the DrmSurfaceBuffer. So when
cleaning up the gbm_surface only the shared pointer is reset and in case
the DrmSurfaceBuffer still needs it, it can access it without problems.
BUG: 385372
FIXED-IN: 5.11.0
Test Plan: Not yet
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8152
guix (like nix) used a separate prefix for each package. Thus the header
files for
qtdeclarative are in /gnu/store/…-qtdeclarative-5.9.1/include/qt5/ while
the ones for
qtbase are in /gnu/store/…-base-5.9.1/include/qt5/. This means that
*each* dependency's include directory must be specified. This is in
contrast to a "normal" Unix-system, where all includes end up in
/usr/include/qt5 and missing to defined some include-dependencies does
often not raise an error.
Differential Revision: https://phabricator.kde.org/D8112
Summary:
So far the method only operated on X11 clients. So when the last desktop
got removed Wayland clients were still on it. As the auto test showed:
this results in a crash.
Credits go to code coverage as it showed that area as red, which made me
look on it and realize this must be broken.
Test Plan: New test case added
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8082
The connect to Compositor::sceneCreated must be disconnected again,
otherwise a restart of the Compositor results in Workspace being created
again.
Thanks to our autotests for finding this problem!
The integrationTest function takes a new optional argument whether the
test supports a Wayland Only mode. If that's the case the test is
compiled twice, once (as always) as "foo" with XWayland support and
once as "foo_waylandonly" without XWayland support.
This way we can ensure that our code always supports both modes. The
tests found multiple issues. At the moment fast running tests are
sporadically crashing on tear down. This needs further investigation.
Summary:
Adds XDGV6 support for the kwin side.
Popup placement support is limited to the stuff v5 had,
a simple offset, rather than the awesome new positioner.
But Qt doesn't make use of it yet either.
Also ideally we should do all the positioning before sending the first
configure, but again Qt doesn't actually do anything with that anyway.
Also integrate pinging clients
Test Plan: gtk3-demo works nicely.
Reviewers: #plasma, graesslin, mart
Reviewed By: #plasma, graesslin
Subscribers: mart, graesslin, kwin, plasma-devel, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D6591
Some distributions (e.g. Arch, FreeBSD) call the DMZ-White cursor theme
Vanilla-DMZ. Due to that our tests are failing even if the correct theme
is installed (see also T6623). This change tries to detect whether
DMZ-White is installed by looking into the GenericDataLocation. If not
found we set to Vanilla-DMZ. No guarantee that the check works for all
setups, but it's only tests...
Summary:
It was possible that we performed an early exit when the caption changes
and this results in the visible name being wrong. E.g if we have two
windows called foo, the second one has the visible name "foo <2>". After
changing that to "bar" the bug resulted in it still being the foo
variant instead of getting cleared.
BUG: 384760
FIXED-IN: 5.11.0
Test Plan: Created new test case exposing the problem
Reviewers: #kwin, #plasma, hein
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7871
Summary:
This is needed in virtual keyboard and also used KKeyServer so far. With
this change it is moved to new API provided in Xkb. The new translation
map is now also used for the direction from Qt::Key +
Qt::KeyboardModifier to xkb_keysym_t.
New implementation is supported by a new test case covering the same
combinations as in the existing direction.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7356
Summary:
Libinput returns -1 when calling libinput_event_touch_get_slot on an event
from a single-touch touchscreen. The returned value is used in
DecorationEventFilter to determine the touch which is acting on it. The value -1
is used to signify that the decoration is not being acted on. Thus when
releasing the touch, it checks whether it was being dragged, and as it thinks
it isn't, it doesn't handle it and the decoration is still being dragged.
Clicking on the decoration then crashes kwin.
Test Plan: Move a window by dragging the decoration with a single-touch touchscreen.
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7854
Summary:
The code in events.cpp was problematic as it was called in a Wayland
session. So KWin changed outputs, this gets mirrored to XWayland and
then KWin reacted on the XRandR event and might have even changed the
refresh rate due to that - bad idea.
This change moves the code into the already existing X11EventFilter for
XRandR events in XRandRScreens.
Test Plan: Run kwin_x11 in gdb on Xephyr, breakpoint in new code and triggered XRandR event
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7654
Summary:
The syncing of the window geometry to the internal geometry can
unfortunately cause a freeze in very special conditions:
1. create QML component
2. a Plasma::Dialog gets created
3. It creates the DialogShadows
4. This triggers QGlobalStatic creation which locks a non-recursive
mutex
5. The creation of DialogShadows creates a Registry and triggers a
roundtrip on the Wayland server
6. KWin processes all Wayland events
7. This triggers the creation of a ShellClient
8. The ShellClient has a PlasmaShellSurface which requested a position
9. The new geometry does not match the geometry of the Plasma::Dialog
10. ShellClient syncs the geometry to the Plasma::Dialog
11. Plasma::Dialog updates the theme because window geometry changed
12. This accesses the DialogShadows...
which is still in the non recursive mutex and we have a freeze.
By delaying the sync to the end of cycle we jump out of this deadly
sequence.
BUG: 384441
Test Plan:
The freeze doesn't hit any more. It's possible that some test
cases need adjustments.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7712
Needed by testing of QPainter scene to access the back buffer. Exposed
as a virtual method in Scene, so that the test does not have to cast to
SceneQPainter.
Summary:
KWin::displayWidth and KWin::displayHeight are bound to X11 which
doesn't make much sense on X11. In addition KWin internally knows
the overall display dimensions through the Screens singleton class.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D1798
Summary:
Bringing another caption feature from X11 to Wayland. If we have
multiple windows with the same caption, starting from the second window
a suffix <number> is added.
E.g. if we have three windows with caption "foo", the naming is:
* foo
* foo <2>
* foo <3>
The change tries to use as much shared code between the X11 and Wayland
implementation. Unfortunately it's not possible to share completely as
the X11 implementation does X11 specific things like editing the visible
name.
By sharing the code the numbering also works cross windowing system.
That is if a window is called "foo" on X11, a new window on Wayland with
caption "foo" will get adjusted to "foo <2>" and vice versa.
The change also eliminates a duplicated signal for captionChanged in
ShellClient (found by test case).
By using the shared implementation on X11 side a bug gets fixed which
got introduced with the support of "unresponsive", this is no longer
considered and the numbering still works even if there is a window which
is unresponsive.
Test Plan: New test case and manual testing
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7425
Summary:
This change splits out the X11 specific event filtering into a dedicated
X11EventFilter. It is created in the x11 standalone platform plugin when
the first Edge is being created.
Some of the X11 specific code is removed from ScreenEdges, though more
refactoring is possible in ScreenEdges to share more code between X11
specific and generic implementation.
Test Plan: Run KWin on Xephyr, screen edge approach effect still shows
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7406
D7460 in kwayland assumes all WL_SHM_FORMAT_ARGB8888 buffers have
opacity premultipied RGB values.
Kwin tests need updating to do the same.
Rendering code did not need changing.
Test Plan: Tests now pass
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7607
Summary:
A surface has an API to know which screen(s) it's on, this is useful
especially for knowing the scale it should render at.
In practice Qt currently doesn't do anything with this information; but
that's set to change.
Test_helpers is changed as we need to create output objects in order for
wl_surface to map them.
Closes task T4467
Test Plan:
Attached unit test.
As mentioned above, it doesn't have any real world impact currently, so not a lot
to test.
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: johanhelsing, graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Maniphest Tasks: T4467
Differential Revision: https://phabricator.kde.org/D7359
Summary:
The KWindowSystem call which we used doesn't work on Wayland as it's only
implemented in the xcb variant and cannot be made available for Wayland
in an easy way as it is still XLib based.
This change turns the optional XCB-ICCCM dependency in a required one
and thus can use the functionality provided by said library to implement
what KWindowSystem provided.
BUG: 382789
Test Plan: New test case which failed with old code
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7046
Summary:
KWin passes the current keysym converted to a Qt::Key in the QKeyEvent.
The current keysym does not always change when a key gets released, so
when pressing a shortcut the release carry a Qt::Key which could be
considered as wrong.
QtWayland transforms the actual pressed/released key into a keysym and
passes that through the QKeyEvent. This change does the same for the
internal windows. A new QKeyEvent is created and adjusted in a way that
it matches what Qt expects.
Why not change everything to how Qt expects it? The key is used at
various places and in KWin internally we expect the behavior how it is
currently implemented. So it's better to use Qt's expectation only when
interacting with Qt.
Also the change carries a workaround for a bug in QKeySequenceEdit
(see QTBUG-62102) and transforms Super to Meta. As this adjustment only
makes sense for the internal windows we need to send in an adjusted
QKeyEvent anyway, so another argument for using the Qt behavior only in
this place.
Test Plan:
Can set a shortcut on Wayland and it can be used to activate
the window.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D6828
Summary:
Based on the work of 3f4995fb9b this change
introduces a GlxContextAttributeBuilder to make the requesting of context
attributes cleaner, more verbose and less error prone copy and paste.
Test Plan:
Switched between Core and legacy and verified the output;
extended auto test
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D6411
Summary:
Split from the last review, as in order to track output's removed (in
any way that's useful) the registry needs to be on the heap and the change grew.
Test Plan:
Every test that previously passed on my system still does
Though currently that's not every test (for some reason) which was
my main motivation for splitting.
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7377
Summary:
Turn Xkb into a QObject
Reduced dependencies on other classes and allows to emit signal directly
instead of emitting a signal on another class.
Dependency inject KWayland::Server::SeatInterface into Xkb
No need to depend on WaylandServer from within Xkb.
[autotests] Add test case for Xkb::toQtKey
Tests all key codes KKeyServer is able to map to Qt.
Migrate Xkb::toQtKey away from KKeyServer
The regression in kwindowsystem in
32526718eae99ccb594360627586eebdf793372b showed once more that it's time
to migrate the xkb keysym to Qt::Key mapping away from KKeyServer. The
main problem with KKeyServer is that it's made for X11 and we don't have
X11 here. This causes warnings printed at runtime and the code only
works by accident at all because KKeyServer fails to initialise
modifiers. That is normally KKeyServer would include the modifiers, but
that is nothing we are interested in for mapping xkb keysyms to Qt::Key.
So to address this, KWin now implements the mapping itself. It's based
on the implementation in KKeyServer, but also improved by providing
faster xkb to Qt conversion (which matters for KWin more than the other
direction).
Long term plan is to extend this so that also on X11 it can be used.
Then it should be split out and be used in KKeyServer as a replacement
for the current implementation which could support both X11 and Wayland.
Test Plan:
New test case added which covers all keysyms supported by
existing KKeyserver mapping
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7336
Summary:
With ddf3536f19 a regression got
introduced resulting in Client::captionChanged not being emitted if
Client::setCaption was called without the force parameter.
The regression is only in master branch.
BUG: 383444
Test Plan: Added test case passes
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7290
Another random failure on build.kde.org (see T6546). This tries to use
QTRY_COMPARE on the SignalSpy's count instead of a wait in the hope that
this can handle the multi-threaded situation better. Though it might
also be possible that the other thread just didn't run in the 5 sec we
waited.
Summary:
The generation of the shortcut caption part is moved from Client to
AbstractClient. The ShellClient also has a captionSuffix and implements
the full part in caption.
Overall this needs more refactoring to support more sharing between the
two implementations. But one step at a time.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D7093
It failed on CI. A possibility is that the wait for the quick tile
changed took to long, so that the next wait already passed and thus
failed. Instead of wait a QTRY_COMPARE on the size of the signalspy.
The StrutsTest is constantly aborting on build.kde.org and lots of
OpenGL stuff in output. This could indicate a problem with the Outline
as the failing test could trigger the Outline. So let's try to disable
it.
Summary:
The buffer for a XWayland window is larger than the actual size. Thus
we need to use the clientSize as reference, not the buffer size.
BUG: 382748
Test Plan: Test passes
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6952
Summary:
Comparing a pure blue square isn't a very effective test as someone
cropping the image will still pass.
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6982
Summary:
Thanks to std::bind we don't need that many different slots to setup the
global shortcut connections. Instead we can have one shared
implementation which takes the argument and passes it to the window.
To support std::bind arguments in kwinbindings the initShortcut method
and dependencies are adjusted as well as a new macro is added.
As I don't want to include abstract_client.h in workspace.h a new enum
is created for the quick tiling flags used in Workspace. This caused a
larger refactoring as the change to an enum class also caused quite some
changes.
Test Plan: Affected test cases still pass
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6783
The test was racing on build.kde.org and failing due to that. We have
a condition there where we wait for some parts being transmitted through
X and some through Wayland. The test assumed X is faster and failed due
to that.
Summary:
Moves most of the implementation from Client to AbstractClient, so that
it can be used for both Client and ShellClient. Only the X11 specific
code is kept in Client.
Not yet implemented is updating the window caption.
Unfortunately the testing of this feature showed that setting a window
shortcut is not working on Wayland at all (the Qt widget doesn't properly
catch the shortcut). So this feature is currently only of erm theoretical
use.
Test Plan: Added new test case. No testing in real world as explained.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6818
Summary:
The last_active_client is set when an AbstractClient gets activated. For
the X11 case the last_active_client was getting reset to nullptr when
the last_active_client gets destroyed. But for the ShellClient that did
not yet happen. This could result in a crash.
This change addresses the problem and adds a test case which triggered
the crash. The condition of the crash are difficult to generate though -
it took me about an hour to write the test for the crash.
1. Wayland client must be active
2. Explicit focus to null (no active client)
3. destroy Wayland window
4. X11 client which sets focus on itself without interaction with window
manager
Test Plan: test case no longer crashes
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6852
KWin cannot handle the layering correctly when a Wayland window is active
and there is a fullscreen X11 window. This test tries to simulate the
situation, but it does not show it.
Nevertheless it's a good test, so let's add it.
CCBUG: 375759
A new test class for KWinBindings added which is intended to group the
testing of the various slots set up in kwinbindings.cpp. As the scripts
also delegate to the slots this is also tested.
Summary:
Introduces a few more attributes needed for creating the OpenGL context
used by the QPA.
Test Plan:
Extended test and run KWin/Wayland and verified that OpenGL context
gets created correctly.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6734
Summary:
The quick tile shortcuts have a feature of moving the window to the next
screen if one presses the same shortcut again.
E.g. if a window is quick tiled to the left on the right most screen,
quick tile again to left should move it to the left screen and quick tile
right. Thus it swaps the borders.
This wasn't handled correctly, especially not for modes like top and
bottom. If a window is quick tiled to the top an impossible mode was
generated: Left | Right. Doesn't make sense.
This change fixes the mode swapping and extends our quick tile testing
to cover the situation.
BUG: 382313
FIXED-IN: 5.10.4
Test Plan: Extended test case
Reviewers: #plasma, #kwin
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6708
Summary:
This change implements a missing TODO to generate the restricted move
area for windows with struts (aka panel) on Wayland.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D6611
Summary:
By allowing panels between screens in 5.8 to have a strut we created a
"regression" in KWin. KWin always was wrong, just we didn't notice as
neither Plasma nor previously Kicker set a strut on panels between shared
screen edges.
The strut is created from the edge of the overall screen setup. This
means a panel on the left edge of a screen on the right has the strut
starting from the left screen. KWin uses the strut to restrict the move
resize area: a window decoration is not allowed to go below a strut. Thus
it becomes impossible to move the window from the right to the left
screen.
This change tries to solve this problem by only restricting the move area
on the screen the window with the strut is on. E.g. if the window is on
the right screen, the left screen is not affected. Thus it's possible
again to move a window from one screen to the other as the added test
case shows.
Unfortunately there are still corner cases where this won't work
correctly. If the window is on both screens this won't work. It is also a
rather heavy change for KWin and thus it's targeted for master and not
for the 5.10 or the 5.8 branch. If we notice that the patch works well
and doesn't create further issues, it should be considered for
backporting.
BUG: 371199
CCBUG: 370510
FIXED-IN: 5.11
Test Plan: Added test case
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6562
The test introduced with 962a2e39ee is
meant to be used with the breeze widget style as that one triggered the
crashy code. Given the test coverage build.kde.org does not run with the
breeze widget style, so enforce this through manual loading.
Summary:
This is a regression due to changes in Breeze to support Qt 5.8+ behavior
change. KWin's own QPA operates like < Qt 5.7 and breeze was programmed
against that. Due to that it can happen now that Breeze hits code paths
in which KWin does not have a surface.
To trigger one only needed to open the user actions menu twice.
This change adds a test case which simulates the problem and fixes all
crashes happening in the code path.
Most likely shadows are now broken for KWin's own windows, this change is
only to prevent the crash and thus is for 5.10 branch, while shadow
fixing will go to master branch.
BUG: 382063
FIXED-IN: 5.10.4
Test Plan: New test case
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6533
Summary:
Showing desktop requests focus on the desktop window. This means the
active window is reset. When ending showing desktop the state was not
restored.
This change addresses this problem by requesting focus to the best
window.
BUG: 375993
FIXED-IN: 5.10.4
Test Plan: New autotest and manual testing
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6420
Summary:
The current way to specify the OpenGL context attributes does no longer
scale as can be seen in D6344. There are too many different context
attribute sets and with every addition we grow lots of copied code. The
chances to introduce errors in that code which is difficult to debug are
very high. As can be seen in the glx backend which defines major 1,
minor 2, but it should be major 2, minor 1.
This change reworks this code by creating a builder class which contains
only an abstract definition of what needs to be in the attributes.
E.g. the version, whether it's robust and so on.
Now we can just have a list of possible attributes in a well described
way:
auto builder;
builder.setVersion(3, 1);
builder.setRobust(true);
All possible builders are added to a list and operated on in a for loop
which tries to creat a context. Once it succeeded it breaks the list.
In addition a debug statement is added which prints out the set of
options which went into the context.
So far this is only done for EGL, GLX can follow once D6344 is merged.
Test Plan: New unit test added, kwin_wayland OpenGL tests run and verified
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6396
The SceneOpenGLTest is transformed into a GenericSceneOpenGLTest which
can create either an OpenGL or an OpenGL ES scene based on env variable
which it sets in initTestCase. The env variable to set is passed as a
ctor argument from the SceneOpenGLTest and the new SceneOpenGLESTest.
This allows to easily run the same test code for both our OpenGL and
OpenGL ES compositor.
Summary:
There was a regression introduced in ScreenEdges when introducing the
activatesForPointer method. It considered the switch desktop on edge,
but not the special case of switch desktop when moving windows. Due to
that the edges did not activate when moving the window.
This change addresses the regression and extends the autotest to ensure
it's properly covered.
BUG: 380440
FIXED-IN: 5.10.3
Test Plan: Manual testing and extended auto test
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6257
On the new CI system this test is failing. This might be a variation of
Qt 5.10 as I'm able to reproduce with Qt 5.10. From the investigation it
is not a bug in KWin. The test was failing due to a missing xcb_flush.
This happens when we go back to the event loop which seems not to happen
in proper timing. By adding a qWait we force to go to the event loop, the
flush is performed and the test passes.
Summary:
If the keymap cannot be created a few pointers in Xkb are null.
We should make sure to not call any xkbcommon functions on those
null pointers and instead use proper fallbacks.
This change introduces fixes for a few usages, but it's not unlikely
that there are more cases.
BUG: 381210
FIXED-IN: 5.10.3
Test Plan:
Autotest added for the condition of the bug, which does
not crash any more. Just starting the test found a few more crash
cases.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6260
Summary:
So far KWin started to filter out the escape key as soon as it gets
pressed. This was done by unsetting keyboard focus. The idea was to
reset keyboard focus when it is only a short press and that then the
keyboard state is correct for the application. But in practice this
does not work. The only application currently supporting pointer
constraints (Xwayland) does not do anything on a key which is pressed
when gaining keyboard focus. The result is escape not working in
pointer constrained Xwayland windows.
This change addresses this problem by changing the interaction to only
unset keyboard focus when our break constraints condition is met. This
should also result in the application not handling the key release, but
it means it gets the key press. Unfortunately I don't have a good way
to test.
BUG: 378452
Test Plan: None
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5488
Summary:
So far KWin only updated the x11 timestamp if the new timestamp is larger
than the existing one. While this is a useful thing it creates problems
when the 32 bit msec based time stamp wraps around which happens after
running an X server for 49 days. After the timestamp wrapped around KWin
would not update the timestamp any more and thus some calls might fail.
Most prominent victims are keyboard and pointer grab which fails as the
timestamp is either larger than the server timestamp or smaller than the
last grab timestamp.
Another problem related to timestamp handling is KWin getting broken by
wrong timestamps sent by applications. A prominent example is clusterssh
which used to send a timestamp as unix time which is larger than the
x timestamp and thus our timestamp gets too large.
This change addresses these problems by allowing to reset the timestamp.
This is only used from updateXTime (which is normally invoked before we
do things like grabKeyboard). Thus we make QX11Info::getTimestamp the
ultimate trusted source for timestamps.
BUG: 377901
BUG: 348569
FIXED-IN: 5.8.7
Test Plan: As I cannot wait 50 days: unit tests for the two conditions added.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5704
Summary:
There are a few places where KWin needs to read values from kcminputrc.
As I need to add yet another one it makes more sense to properly
structure it like in other cases and have only one kcminputrc hold in
the application. This also allows to better mock the config values in
the integration tests.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5540
Summary:
This change ensures that the blocking condition of screen edges is also
honored for touch screen swipe gestures.
Test Plan: Only the added test case
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5403
Summary:
This is quite similar to the policy "window" - the main difference is
that windows from the same application share the layout. So only
switching to a window from another application changes the layout.
This change is the last policy to add for support of all the policies we
have on X11.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D5365
Summary:
This policy stores the layout for each window which becomes active
and restores the layout once it gets activated again.
Test Plan: Added test case
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D5315
Summary:
This change introduces the initial support for keyboard layout switching
policies like in the X11 session. This first change only adds support for
Global and Virtual Desktop policy. This means the current layout is
stored in context to the current virtual desktop. Whenever one changes
the virtual desktop the previous layout is restored. If the user has not
yet navigated to this virtual desktop a switch to default layout is
performed.
This is the first code interacting with the new Virtual Desktop API which
is not based on integer ids. To fully support this the API is slightly
extended.
Test Plan: Added test case
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5301
Summary:
During pointer motion we already had the condition that an update of
focused pointer surface can only happen when no button is pressed. But
there are more conditions where we try to update the focused pointer even
if a button is pressed. E.g. if the stacking order changes.
This happens when trying to move one of Qt's dock widgets:
1. Press inside a dock widget
2. Qt opens another window, which is underneath the cursor
3. KWin sends pointer leave to parent window
4. dock widget movement breaks
This change ensures that also this sequence works as expected and the
pointer gets only updated when there are no buttons pressed, no matter
from where we go into the update code path.
BUG: 372876
Test Plan: Dock widgets in Dolphin can be moved now.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5461
Summary:
On X11 the edges reserved only for pointer started to show the approach
geometry. This problem is addressed by this change.
Touch screen events do not go through this method, neither is it used on
Wayland.
Test Plan: Tested on X11, problem fixed
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5421
Summary:
By changing all kcfg to have arg="true" we can pass in the same
KSharedConfigPtr into all effects. This allows to have fake config in
the tests and in the planned effect demo mode.
Also it means that we don't have to hardcode the name kwinrc into the
files. In the configs - where we cannot access the effectshandler - we
use the define KWIN_CONFIG which gets generated based on the compile
time arguments.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3571
Summary:
There is a special mode in TabBox which is the noModifierGrab mode. This
is Alt+Tab active without a modifier being hold. This mode is entered
when being activated through screen edges (either pointer or touch). So
far this was not exposed to QtQuick and thus one could not end the mode
using pointer or touch. It is possible to select another window, but not
to activate it. That required the press of a keyboard key.
This setup is rather unfortunate. By exposing the mode to QtQuick we can
react from QtQuick side to it and invoke already exposed functionality to
select and item and directly activate it - existing left-over from the
Plasma Active window switcher.
Test Plan:
Tested on X11 and Wayland with an adjusted lnf package. It kind
of works, but there are additional issues on both X11 and Wayland.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5414
Summary:
So far the window decoration was not considered and e.g. right clicking
the window decoration resulted in two open popups - one by KWin and one
by the application. This change addresses the problem by ensuring the
popup gets cancelled if the decoration is clicked. It's considered not
being part of the window.
Test Plan: Added test case which fails without the change
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5388
Summary:
Exposes two new global JS functions to register and unregister touch
screen edges.
Test Plan: Added test case
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D5277
Summary:
This change introduces a new property mode in ScreenEdgeItem to switch
between Pointer and Touch mode. The touch mode interacts with the new
touch screen edge gestures through a QAction.
Test Plan: New test case added
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D5272
Summary:
This is implemented through QActions following the general approach
inside KWin and not the older approach used by ScreenEdges for pointer
callback activation.
Test Plan: Extended auto test
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D5263
Summary:
The new touch gestures activated for the same actions as configured for
mouse pointer actions. This has disadvantages as the only configured
default screen edge action cannot be triggered (corner) on touch. On the
other hand setting a default touch gesture would be rather annoying with
pointer as a default.
So overall it makes sense to split the actions and have dedicated pointer
and dedicated touch actions.
This change introduces the first part of it and splits the handling in
general. We now have:
Activates for pointer and touch:
* client (auto-hiding panels)
Activates for pointer only:
* the configured action
* virtual desktop switching
* callbacks
Activates for touch only:
* the new touch action
The touch actions are implemented similar to the pointer actions which
slight improvements in the code which will be backported to the pointer
actions.
Introducing callbacks will be the next step. I plan to do it a little bit
different by using QActions as that's what KWin internally uses for
everything except screen edges.
Test Plan: Manual testing and improved auto tests
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5252
Summary:
So far KWin did not properly handle popup windows. That is when a popup
surface got created and a click outside the surface happened KWin did not
send out the popupDone Wayland event.
This change makes KWin aware of whether a surface is a popup and tracks
through a new PopupInputFilter whether there are popup windows. In case
there are popups the new filter waits for mouse press events and cancels
the popups if the press does not happen on any surface belonging to the
same client. To quote the relevant section of the Wayland documentation:
The popup grab continues until the window is destroyed or a mouse
button is pressed in any other client's window. A click in any of the
client's surfaces is reported as normal, however, clicks in other
clients' surfaces will be discarded and trigger the callback.
So far the support is still incomplete. Not yet implemented are:
* support xdg_shell popup windows
* verifying whether the popup is allowed to be a popup
* cancel the popup on more global interactions like screen lock or
kwin effect
BUG: 366609
FIXED-IN: 5.10
Test Plan: Auto test and manual testing with QtWayland client
Reviewers: #plasma, #kwin
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5177
When an application is not responding, its window is desaturated to communicate this.
Also "(Not Responding)" is added to the title bar.
Differential Revision: https://phabricator.kde.org/D5245
Summary:
This was forgotten during implementing the interactive window/point
selection. With this change it is also possible to perform the
interaction through touch events. In that case KWin takes over any
existing touch sequence.
This implements T5315.
Test Plan: Added auto test and took a screenshot through touch events
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5203
Summary:
Each Edge creates a SwipeGesture for touch activation. The swipe needs to
be a single finger starting from the edge into the screen for at least
20 %. The SwipeGesture and GestureRecognizer is extended to support the
use cases of the touch screen edge swipe.
New features supported by the gesture system are:
* minimum and maximum position
* a minimum delta for the swipe
* progress signal based on the minimum delta
* starting a swipe with a start point
The Edge has the progress signal connected to its approach signal, thus
visual feedback is provided through the screen edge effect.
The screen edge system supports touch only for the edges (corners are
too difficult to activate on touch screens). At the moment the following
features are supported:
* screen edge show/raise of windows (e.g. auto hidden panels)
* trigger the configured action
* trigger the configured callback function (e.g. script)
In future it might make sense to add a touch specific configuration
action to support different actions for screen edges activated by mouse
and touch.
BUG: 370323
Test Plan:
configured a screen edge and triggered through touch,
added an auto-hiding panel and triggered through touch
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel
Tags: #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D5106
Summary:
This change adds global touchpad swipe gestures to the
GlobalShortcutsManager and hooks up the swipe gestures as defined at the
Plasma Affenfels sprint:
* swipe up: Desktop Grid
* swipe down: Present Windows
* swipe left: previous virtual desktop
* swipe right: next virtual desktop
The main work is handled by two new classes: SwipeGesture and
GestureRecognizer. This is implemented in a way that it can be extended
to also recognize touch screen gestures and pinch gestures.
The SwipeGesture defines what is required for the gesture to trigger.
Currently this includes the minimum and maximum number of fingers
participating in the gesture and the direction. The gesture gets
registered in the GestureRecognizer.
The events for the gesture are fed into the GestureRecognizer. It
evaluates which gestures could trigger and tracks them for every update
of the gesture. In the process of the gesture tracking the
GestureRecognizer emits signals on the Gesture:
* started: when the Gesture gets considered for a sequence
* cancelled: the Gesture no longer matches the sequence
* triggered: the sequence ended and the Gesture still matches
The remaining changes are related to hook up the existing shortcut
framework with the new touchpad gestures. The GlobalShortcutManager
gained support for it, InputRedirection and EffectsHandler offer methods
to register a QAction. VirtualDesktopManager, PresentWindows and
DesktopGrid are adjusted to support the gesture.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel
Tags: #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D5097
Summary:
Consider the following situation: we have three InputEventFilter linked
in the sequence A - B - C.
The input filters are processing pointer motion events. The expected
behavior is that the new motion is processed in the sequence
A -> B -> C
So far this did not work correctly if the pointer gets warped during the
processing. If e.g. filter B warps the pointer we get a motion sequence:
A (1) -> B (1) -> A (2) -> B (2) -> C (2) -> C (1)
The filters following the one warping the pointer get first the newer
than the older position. This is obviously wrong. Unfortunately it is not
just a theoretical condition, but a condition happening when interacting
with the screenedges, which warp the pointer.
This change introduces a PositionUpdateBlocker in
PointerInputRedirection::processMotion to ensure that a processMotion
call finishes prior to the next update. If the PositionUpdateBlocker is
blocked the new position gets scheduled and processed once the
PositionUpdateBlocker gets destroyed.
With this we get the expected sequence for B warping pointer:
A (1) -> B (1) -> C (1) -> A (2) -> B (2) -> C (2)
This should hopefully improve the interaction with screen edges on
Wayland.
CCBUG: 374867
Test Plan:
Added an auto test demonstrating the issue of incorrect
ordering caused by screenedges. Prior to the change the test is failing.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5182
Summary:
new logout effect: it's just a slow fade in of the logout
greeter (window is usable immediately tough
Test Plan: logout greeter now fades in without setting the window opacity manually
Reviewers: graesslin, #plasma
Reviewed By: graesslin, #plasma
Subscribers: broulik, plasma-devel, kwin, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D5045
Summary:
auto hidden windows were shown again when their geometry
changed, this was done for being as easy as possible as
the unhide zone changed, but the behavior looked very
annoying as autohide panels with an self resize taskbar
would unhide themselves every time any window gets open
or closed.
This makes the edge keep track of
windows that can resize/move themselves while auto hidden
Test Plan:
a self-resizing autohidden panel with a taskbar in it doesn't auto unhide
anymore when a window is opened or closed.
the unhide area gets properly updated
Reviewers: graesslin, #plasma
Reviewed By: graesslin, #plasma
Subscribers: luebking, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4718
Summary:
It doesn't make much sense to export the DBus service if there is nothing
one can do with it.
Test Plan: Added test case
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4562
Summary:
Increases minimum Qt version to 5.7. This allows to drop the pre-5.7
virtual keyboard and various ifdefs for now unsupported versions.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4485
Summary:
So far KWin did not support the sequence:
1. Create wl_shell
2. Create PlasmaShellSurface
3. Create wl_shell_surface
KWin only supported the case that the PlasmaShellSurface is the last
thing to get created. This is rather limiting and can be considered a
bug. At least we had a QEXPECT_FAIL auto test for this situation. So
it was a known issue.
This change should make it easier to support the QtWayland changes in
Qt 5.8.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4482
Summary:
Unfortunately Xkb does not emit a signal when the keyboard layout
changes. Due to that we need to manually check in KeyboardLayout after
each action which could change the layout whether the layout changed.
This was not yet done for the case when the layout got changed through
the DBus interface. Resulting in the DBus signal not emitted.
This change addresses the issue by invoking the check for change after
changing the keyboard layout.
Test Plan: Added test case
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4387
Summary:
So far KWin parsed the kxbkrc at multiple places (once in Xkb, once
in KeyboardLayout). This is now replaced by one KSharedConfigPtr hold
by kwinApp, just like the normal kwinrc. The KSharedConfigPtr is now
passed to Xkb.
As a nice side effect this makes it easier to test keyboard layout
changes as we can now properly mock the keyboard configuration. Thus
this change also comes with an autotest for loading keyboard layout
configuration. This is becoming more and more a need as we start
getting bug reports for layout specific issues like global shortcuts
not working with Greek layout.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4315
Summary:
So far on a geometry sync we did not call performMoveResize like we
do on X11 when getting the sync. This resulted in the
clientStepUserMovedResized not getting called during resize and the
geometry update effect to not function.
BUG: 374869
FIXED-IN: 5.9.1
Test Plan: Geometry hint updates
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4333
During resize the signal clientStepUserMovedResized signal is not emitted
for Wayland windows which causes the window geometry effect to not
function. This change adds a test case highlighting the problem.
Instead of having an expect fail on every check for the count of signals
emitted for clientStepUserMovedResized we reset after the first one which
is the actual issue.
Thus we can properly check that in the other cases the signals are
emitted.
Summary:
If a Wayland window is decorated the decoration size was not considered
when passing touch points to the Wayland window. For pointer input this
is considered and implemented through the input transformation matrix
which KWayland::Server::SeatInterface accepts. This should also be done
for Touch. Unfortunately the frameworks version for Plasma 5.9 is already
tagged and done and we cannot depend on new API.
Thus this change tries to workaround by calculating the proper offset
through the input transformation matrix. It isn't nice but fixes the
problem for now.
BUG: 374778
Test Plan: Only in unit test, real test still missing
Reviewers: #plasma_on_wayland, #kwin
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4074
Summary:
This change adds support for marking the OnScreenMessage as it should
skip close animation. The screenshot effect is adjusted to use the
on screen message instead of the custom effect frame.
Test Plan: Message window is not captured when taking screenshot
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4091
Summary:
So far we didn't trigger modifier-only-shortcuts when capslock was
enabled. In fact we even ensured that the shortcuts did not trigger.
This seems not to be what our users expect. Meta should still trigger
if capslock is on.
This change modifies the logic to determine which modifier is currently
pressed by using the modifiersRelevantForGlobalShortcuts. The difference
to the "normal" modifiers is that this excludes capslock from modifiers
and excludes consumed modifiers. The latter is not really relevant as
modifier-only-shortcuts do not trigger if multiple keys are pressed,
which is required to have a modifier consumed.
BUG: 375355
FIXED-IN: 5.8.6
Test Plan: Only with adjusted autotest
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4241
This extends the testCapsLock to ensure that modifier only shortcut
trigger when capslock is enabled. So far the test only ensured that
capslock doesn't trigger the shift modifier only shortcut.
As the test shows currently when capslock is on, the meta key doesn't
trigger any more.
CCBUG: 375355
This extends the testCapsLock to ensure that modifier only shortcut
trigger when capslock is enabled. So far the test only ensured that
capslock doesn't trigger the shift modifier only shortcut.
As the test shows currently when capslock is on, the meta key doesn't
trigger any more.
This test case goes into Plasma/5.9 branch and not in Plasma/5.8 as a
fix will most likely need the new xkbcommon 0.7 code paths which we do
not have in Plasma/5.8.
CCBUG: 375355
32f4e115e2 broke the test. To my
surprise there was a test using the kwin internal shortcut handling
instead of using KGlobalAccel.
This change adjusts the test to go through KGlobalAccel for testing
the global shortcut.
Summary:
InputRedirection has a workaround to add a connect on a QAction which
is used for a global shortcut. This is specific to the X11 platform as
the xtime needs to be updated.
This change adds a new virtual method to the Platform and moves the
implementation into the X11 standalone platform. Thus it does no longer
gets called on Wayland.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4168
Summary:
We need this to use the new OnScreenNotification in the screenshot
effect.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4089
Summary:
This change triggers a fade out animation when the mouse is moved over
the OnScreenNotification, thus revealing the windows underneath. When
moving the mouse out of the OnScreenNotification it gets faded in again.
This is useful for various cases, e.g. when picking a color and the pixel
one wants to pick is underneath the notification, or when trying to kill
a window...
Test Plan: Manual testing in nested setup
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3964
Summary:
The OnScreenNotification gets moved during its placement. This update
of the geometry did not get synced to the QWindow's geometry as it
should.
The reason for this is the rather special implementation of
AbstractClient::move. This just modifies the geom variable and does not
call into setGeometry at all. Instead a virtual doMove method is invoked
to inform the platform specific client implementation about the move of
the window. For a "normal" ShellClient that is fine - there is nothing
to do.
This change adds an implementation of doMove in ShellClient to sync the
geometry to the internal window. This is not yet enough to fix the
geometry of the OnScreenNotification. It gets placed with a
GeometryUpdatesBlocker in place causing the doMove never to be called.
Instead setGeometry is invoked again when the geometry updates get
unblocked. So far ShellClient did not do anything in this case. This
change ensures that at least the doSetGeometry method is performed again.
Test Plan: Added test case and manual testing of OnScreenNotification
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3963
Summary:
This change adds support for opacity on a KWin internal QWindow.
Calling QWindow::setOpacity syncs the value to the ShellClient
representation of the QWindow.
This is needed for fading out the OnScreenNotification on mouse
over.
Test Plan: Added auto test and manual test
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3928
Summary:
This adds support for the new on-screen-message support to the
kwineffects API and makes use of it in the colorpicker effect.
Not yet added to screenshot effect as for that we need support for
skip close animation on the on-screen-message window.
Reviewers: #plasma, #kwin
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3803
Summary:
Recently we noticed that there are multiple areas where KWin needs to
inform the user about how to operate. Examples are:
* Screenshot
* ColorPicker
* Pointer constraint enabled
* Pointer constraint about to be removed
* Kill Window
For Screenshot and ColorPicker we used an EffectFrame to render it. But
this is not an optimal solution as it's lacking many features we would
need. We cannot properly use it from within KWin core, we cannot
implement features like hide on mouse over, etc. etc.
This change introduces an OnScreenNotification which supports:
* showing an icon
* showing a message
* timeout
It is Qml styled, so that it can be easily adjusted. This is a big
improvement over the EffectFrame solution. The Qml file creates a Plasma
Dialog of type OSD. Thus KWin places it like the normal OSD windows and
also looks kind of similar. In the case of KWin the focus is more on the
message, than an icon, so the icon is placed left of the text.
While the OnScreenNotification is supposed to be used like a singleton,
it doesn't use the KWin singleton pattern. Instead a small wrapper
namespace OSD is introduced which provides a convenient API for KWin
internal areas to show/hide the notification. By not using the KWin
singleton pattern, the OnScreenNotification does not depend on any other
parts of KWin and can be easily unit-tested.
A few features are still missing and will be added in further commits:
* hide-out on mouse over
* optional skip close animation (needed for screenshot)
* X11 support (not that important as it's mostly for Wayland features)
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3723
Summary:
The position of an OSD is based on the size of the window. If the
size of the OSD changed, it would not be positioned correctly any more.
With this change the OSD window gets placed again if the size changes.
Thus it's also placed correctly even if the window changed it's size.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3720
Summary:
This is a preparation step for no longer creating a socket in the tests
and slightly simplifies the init test code.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3575
Summary:
There are two types of constraints supported:
1. Pointer confinement
2. Pointer locking
In the case of confinement the pointer is confined to a given region of
the surface. This is comparable to general operation where the pointer
is confined to the screen region.
In the second case the pointer gets locked. That means it cannot move at
all. No further position updates are provided, only relative motion
events can go to the application. There is a hint about cursor position
update on unlock which is not yet implemented in KWayland::Server, thus
also not in this change.
The implementation in KWin grants the requests for pointer constraints
when the pointer enters the constrained region, either by pointer
movement or by e.g. stacking order changes. There is no confirmation
from user required to enter that mode. But we want to show an OSD when
the pointer gets constrained, this is not yet implemented, though.
Breaking an active constraint is relatively easy. E.g. changing the
stacking order will break the constraint if another surface is under the
cursor. Also (in case of confinement) moving the pointer to an
overlapping window breaks the confinement. But as soon as one moves the
pointer back to the window a constraint might get honoured again.
To properly break there is a dedicated event filter. It listens for a
long press of the Escape key. If hold for 3sec the pointer constraint is
broken and not activated again till the pointer got moved out of the
window. Afterward when moving in the pointer might activate again.
The escape filter ensures that the key press is forwarded to the
application if it's a short press or if another key gets pressed during
the three seconds. If the three seconds way fires, the later escape
release is not sent to the application.
This basic interaction is also ensured through an added auto test.
This change implements T4605.
Test Plan: Added auto test and nested KWin Wayland with D3488
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3506
Go for a more intuitive unset behaviour of scroll method and acceleration
profile properties.
Summary:
Unsetting a scroll method should only work, if the scroll method is currently
active. For example when scroll-two-finger is active (i.e. scroll-edge,
scroll-on-button-down is not active):
* unsetting scroll-two-finger should deactivate it and activate no-scroll
* but unsetting for example scroll-edge should _not_ deactivate scroll-two-
finger and _not_ activate no-scroll
Reworked setting scroll method auto test in order to test it.
Regarding acceleration profiles: Unsetting one, should always switch to the
other possible one as long as both are supported. In this case
LIBINPUT_CONFIG_ACCEL_PROFILE_NONE is not a valid option in contrast to the
definition of the scroll method enums.
Reviewers: #kwin
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3590
This patch is made in preparation for the Touchpad KCM for Wayland.
Summary:
* KWin has a Libinput version requirement bump to 1.5
* new isTouchpad property to distinguish touchpads from mice
* new lmrTapButtonMap property
* new disableWhileTyping property
* new pointerAccelerationProfile property
* new defaultPointerAcceleration property
* save to config mechanism added for new propertys and pointerAcceleration
* new D-Bus interface org.kde.KWin.InputDeviceManager and method devicesSysNames
* removed unnecessary additional D-Bus service name org.kde.KWin.InputDevice
* changing acceleration in the Mouse KCM doesn't influence touchpads anymore
Reviewers: #kwin, #plasma, davidedmundson
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3479
Summary:
Maximize code was not yet adjusted to support decorations. Code is as
much as possible similar to the X11 Client implementation.
BUG: 370982
Test Plan: Added auto test and run a nested KWin/Wayland with the setting enabled
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3508
Summary:
This brings some more checks from Client to ShellClient. Thus the
states are better adjusted.
Unfortunately the X11 implementation is also slightly adjusted, so could
create regressions in worst case.
BUG: 368393
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3507
Summary:
The effect exports itself to DBus as object "/ColorPicker" and provides
an own interface "org.kde.kwin.ColorPicker".
It has one exported method to DBus "pick" which returns a QColor. When
invoked an interactive position picking selection is started. If it ends
the effect reads the color value at the picked position from the OpenGL
color buffer.
This implements T4568.
Reviewers: #kwin, #plasma_on_wayland, broulik
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3480
Summary:
A second interactive selection mode gets added to select a position on
the screen. This is handled by the same input event filter as for the
window selection. Just that instead of returning a window, it returns a
QPoint.
This allows to pick a point on the screen which we need to screenshot
the screen under the mouse cursor and in future for color picking.
The screenshot effect provides two new dbus methods to (interactively)
select a screen or fullscreen. This allows spectacle to screenshot the
(full) screen with still having the user in control.
Reviewers: #kwin, #plasma_on_wayland, bgupta
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3475
This is a larger patch rewriting some parts of the config saving functionality
in device.cpp in order to:
1. Make it possible to save ScrollMode as integer instead of using three booleans
2. Simplify the addition of new keys or types in the future
Changes in detail:
a) Adds new ConfigKey ScrollMethod and removed now unnecessary keys per method
b) Adds constructors to the ConfigData struct. This allows to create ConfigData
entries for s_configData without the need of stating empty brackets and the
useage of default values.
c) Use plain member function pointers instead of std::function, in order to
compactify code and have better compile output in case something goes wrong.
c) Cleans up ScrollMethod functions and adds interface methods for transforming
the saved integer into type enum libinput_config_scroll_method.
d) Adjusts auto test for loading the ScrollMethod value from the config file.
Reviewers: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3460
Some small improvements / fixes to the libinput backend:
- Query libinput_device_config_left_handed_get_default
- Write leftHanded property to config file
- When saving the touchpad scroll mode, write false to all other ones.
Otherwise it will always enable the last read entry after reboot.
- Use macro for setLeftHanded(bool) and setNaturalScroll(bool)
Reviewers: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3430
Summary:
For Wayland windows we can have a sequence of window unmapped
(windowHidden signal) followed by a windowClosed way later when the
application quits. This is for example the case with menus.
The result of this was that the fade out animation triggered when the
application quit showing all the already closed menus again.
This change implements a windowShown and windowHidden handler and
triggers the fadeIn/Out animation on it. If the window gets shown
again the existing fadeOut animation gets cancelled, so that it can run
again.
If a window gets closed for which a fade out animation has been run
already, it's not triggered again, thus ensuring that we don't see
zombie windows.
CCBUG: 372622
Reviewers: #kwin, #plasma_on_wayland, hein
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3419
Summary:
The method is supposed to return the AbstractClient's size for a given
client size. That is the size including the window decoration.
The default implementation returned the passed in client size without
adjusting for the decoration. This resulted in ShellClient getting a
wrong size especially when AbstractClient::adjustedClientSize (which
calls sizeForClientSize) was called.
The result of the incorrect size was for example a shrinking of the
window when starting to resize a window.
BUG: 370345
FIXED-IN: 5.8.4
Reviewers: #kwin, #plasma_on_wayland, broulik, subdiff
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3414
Summary:
AbstractClient gains a new pure virtual killWindow method and this gets
implemented in ShellClient.
ShellClient performs the killing by sending a term signal to the
process. This can only work if the client connected through the socket
and didn't get a socketpair fd passed. In that case the pid is KWin's
and KWin doesn't want to terminate. Thus this is special handled to
destroy the connection instead.
In case terminating the process has no effect, the connection gets
destroyed after five seconds.
The KillWindow is adjusted to operate on AbstractClient instead of
Client.
This implements T4463.
Test Plan: Killed windows and auto test
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3370
Summary:
EffectsHandler gains a new method to startInteractiveWindowSelection
which just delegates to the one in Platform. That way a window can be
selected and returned to an Effect.
The screenshot effect makes use of this new functionality and provides
an interactive window screenshot mode which saves to a temporary file.
Note that this is not yet the variant intended for use in spectacle.
Test Plan: Took a screenshot on Wayland
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3367
Summary:
The interactive window selection is implemented in InputRedirection
through a dedicated InputEventFilter. The InputEventFilter so far takes
care of pointer input and keyboard input. In addition it ensures that
keyboard and pointer focus is reset on start and on end.
With this change KillWindow now also works on Wayland, but only for X11
windows, as the Wayland variant is not yet implemented.
Test Plan: Tested in nested setup, auto-tests still needed
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3365
Summary:
And finally nothing inside libkwineffects, libkwinglutils,
libkwinxrenderutils and kwineffect and kwin core uses KWin::display.
We are finally XLib free!
This change drops KWin::display and removes the include to QX11Info from
kwinglobals.h. And the libraries no longer need to link X11Extras. Due
to that removal a few seeming unrelated changes are required to add the
include where needed and linkage to X11Extras.
The biggest change is to x11 platform plugin which still needs the
display and caches it in the Platform and passes it to various places in
a way that the code doesn't need to be adjusted.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3337
By changing the loading of scripted effect config to interact with
kwinApp we broke the tests which do not use a kwinApp.
This change turns the access to the KSharedConfigPtr go through the
property system, so that the tests can also install a dummy
KSharedConfigPtr. With that scripted effects loader test passes and no
longer crashes and the integration/effects tests also still pass.
Summary:
So far ScriptedEffect used EffectsHandler::effectConfig to get the
KConfigGroup for the ScriptedEffect. This has the disadvantage that the
config file name is hardcoded to kwinrc in EffectsHandler::effectConfig.
Inside KWin a KSharedConfigPtr is used which can point to somwhere else
than kwinrc. If that was the case the ScriptedEffects were not able to
pick up this customized config and instead continued to read values from
kwinrc.
With this change the ScriptedEffects use the KSharedConfigPtr provided
by KWin. Thus in e.g. autotests we can use the general way to configure
the effects and don't need to write to the config.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3383
Summary:
There is no effect using this method. As it's X11 specific it should be
removed.
Internally the EffectsHandlerImpl still requires the method. Thus it's
moved into the private part.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3297
Summary:
So far the X11EventFilter only supported one event type. But most
usecases for an X11EventFilter require to support multiple event types.
E.g. a filter listens for both key press and key release.
This change extends the internal X11EventFilter to support multiple
types and Workspace::workspaceEvent makes use of that.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3361
Summary:
The method is not used by any Effect and is X11 specific, thus better
remove it for good.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3298
Summary:
The VirtualDesktopGrid is ported to the new VirtualDesktop objects. The
grid consists now of QVector<VirtualDesktop*> rows and a QVector of
those rows.
This change requires to adjust the code using the VirtualDesktopGrid.
This mostly affects VirtualDesktopManger. The methods for toLeft, above,
next, etc are now all operating on VirtualDesktop with the uint variants
- if still present - only delegating to the new method. The Functor
objects are also adjusted, though mostly still providing the old API for
compatibility.
In KWin core only one now ambiguous call is adjusted (useractions) and
the desktop grid usage in EffectsHandlerImpl is adjusted. Other usages
are not yet adjusted and need porting to fully get rid of the old
uint-based API.
Test Plan: VD test still passes
Reviewers: #kwin, #plasma_on_wayland, hein
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3327
Summary:
Device gets a KConfigGroup injected and supports loading device-specific
settings. This is invoked from Libinput::Connection when adding a new
Device.
Whenever a Device option is changed successfully through the DBus
interface it gets synced into the KConfigGroup, thus on next loading of
the Device it gets restored.
The config group follows a pattern of:
[libinput][vendor][product][name]
Thus every device has a specific and persistent configuration.
Test Plan: So far only tested through autotests
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3264
Summary:
When windows get added some effects grab the window and want to be the
only one animating this window. For this the grab roles exists. An
effect being notified later on evaluates the grab state and does not
start the animation.
This process failed due to being dependent on the order the effects are
loaded. Window Added/Closed are signals emitted by EffectsHandler, thus
first come, first serve. The requested effect order does not play into
it.
Due to that it could happen that an Effect which should not animate,
started to animate as the grab was still there.
This change adds the possibility to be notified whenever the window data
changes. A new signal is added to EffectsHandler which is emitted
whenever the windowData changes. The interested effects connect to it
and cancel their (just started) animation for the window.
Adjusted effects are:
* ScaleIn
* Fade
* WobblyWindows
In case of WobblyWindows an additional logical error was fixed that the
animations were only run when an effect grabbed instead of the other way
around.
BUG: 336866
FIXED-IN: 5.8.4
Reviewers: #kwin, #plasma, broulik
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3211
Summary:
The QStyle might interact with our internal Wayland connection. If the
cleanup happens after destroying our internal Wayland connection KWin
will crash at tear-down.
With this change the QStyle can perform cleanup already prior to the
deconstruction of the Wayland connection.
CCBUG: 372001
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3241
Summary:
So far KWin used the window title provided from the window directly
without any sanitizing. This could result in broken window decorations
if the title included line breaks. Those were passed to the decoration
and depending on the way how the decoration renders the title, it could
result in visual breakage.
Having line breaks in a window title doesn't make sense. Given that KWin
now simplifies the title when copying it to it's own structure. This
also ensures that the title passed to e.g. task manager does not have
any line breaks on Wayland.
BUG: 323798
FIXED-IN: 5.8.4
Test Plan: Opened the web page in a nested KWin, properly rendered now.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3215
Summary:
This change ensures that the DebugConsole does not have a minimize
button.
BUG: 372000
FIXED-IN: 5.8.4
Reviewers: #kwin, #plasma_on_wayland, broulik
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3244
Summary:
When moving windows we don't want to snap against not visible windows
like auto-hidden panels.
BUG: 365892
FIXED-IN: 5.8.4
Test Plan: So far only auto-test, manual test will follow.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3225
The test illustrates that special characters like a line break are not
removed from the window caption, which results in a line break added in
the window decoration.
Test case uses a title from a web page triggering it in Firefox.
CCBUG: 323798
Summary:
KWindowSystem provides a KDE specific property for the desktop file
name. This allows KWin to take the icon from the desktop file. The
advantage from the desktop file is that KWin normally gets higher
resolution icons than provided through the xproperty based icons used
previously. If the desktop file does not provide an icon name, KWin
falls back to the previous implementation.
As on Wayland the icon is taken from the desktop file name already the
code for X11 and Wayland is merged in AbstractClient. Also to the
PlasmaWindowInterface the appId is taken from the new desktop file
instead of the resourceName. Due to that for Xwayland windows where KWin
knows the desktop file name it can be passed to PlasmaWindowInterface.
This allows e.g. the task manager to better map the windows to
applications and provide better icons. Also it means that icons do not
need to be passed as bitmap data to the clients.
Test Plan:
Verified that icon is taking from desktop file if provided and
from X property if not provided and that Wayland windows still have icon.
Reviewers: #kwin, #plasma_on_wayland, hein
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3177
Summary:
When triggering a move resize all following pointer events are grabbed
by KWin itself. Thus the correct behavior is to informe the client about
it and send a pointer leave.
This ensures that after the move resize ended the pointer gets a new
enter. By sending anew pointer enter the position gets updated to the
new position which so far did not happen and the client generated events
on the wrong position.
BUG: 371573
FIXED-IN: 5.8.3
Reviewers: #kwin, #plasma_on_wayland, broulik
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3154
Summary:
The implementation delegates to the Platform to perform the actual
show/hide of the cursor image.
This replaces the implementation in the zoom effect which so far
directly interacted with xfixes to show/hide the cursor. This is now
provided by the x11/standalone platform. And due to this change the zoom
effect can now properly hide the cursor on platform DRM (wayland) as
well.
Test Plan: Zoom effect on Wayland hides the cursor
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3120
Summary:
Some platforms support to hide and show the cursor. This will be needed
by e.g. the zoom effect which currently only provides this functionality
on X11.
This change introduces a new method in the Platform to hide and show the
cursor. The methods need to be called balanced and the implementation
takes care of only showing again if all hide got matched by a show.
The actual hiding and showing is performed in the platform plugins. So
far the DRM and X11/Standalone platforms implement the required
functionality, though other platforms probably could implement as well.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3119
The first test case was sometimes failing due to the time value in the
first render pass being too high. So that the effect ended directly for
the window.
This change adds a small waiting time for the compositor to render prior
to the creation of the window. Ideally we would connect to frameRendered
signal, but the OpenGL compositor doesn't emit it yet.
Test more combinations of other effects together with sliding popups.
The problem does not only exist for scale in but for pretty much any
effect that the ordering in which the effects get loaded makes the test
pass or fail.
Some effects require OpenGL, as build.kde.org does not support OpenGL
compositing (yet), the tests only do the OpenGL cases if an OpenGL
compositor could be created.
CCBUG: 336866
The test case loads the sliding popups effect and the scale in effect
which also operates on added windows. As the test case shows depending
on the sequence how the effects are loaded, the window gets animated by
both effects (wrong) oor only sliding popups.
CCBUG: 336866
Summary:
It can happen that startAnimation is invoked multiple times for a
window. In case it was invoked a second time the previous animation was
not cancelled. This resulted in the set-animation to never end. When
closing a window, it would stay around as a translucent, non-interactive
window zombie.
This change ensures that existing animations get cancelled.
BUG: 342716
FIXED-IN: 5.8.3
Test Plan: Tested through autotest and manually.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3190
This test case simulates a condition of the translucency effect
modifying windows of certain types (e.g. dialogs).
In case the effect got activated for a window it does not end after the
window gets closed and creates a non-interactive zombie window.
CCBUG: 342716
Summary:
There are several effects (screenshot, zoom) which need access to the
cursor image and cursor hotspot. So far these effects used X11
unconditionally to get the cursor which obviously does not work on
Wayland.
This change adds a new class PlatformCursorImage to kwinglobals which
wraps what a cursor is (image and hotspot) and adds a new virtual method
to Platform to provide such a PlatformCursorImage. By default it's the
cursor image the Platform tracks. On X11/standalone platform this new
virtual method is overriden and provides a PlatformCursorImage from X11
using the code previously used in screenshot effect.
Screenshot effect and zoom are adjusted to use the new API instead of
X11.
Test Plan:
Zoom effect tested on Wayland, now gets the proper cursor icon.
X11 functionality not yet tested.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3093
Summary:
On X11 one needs to force activate a panel to pass it focus. This change
implements something similar for Wayland but a little bit more stateful
by using a request on the PlasmaShellSurface. If set KWin will activate
the panel.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3037
Summary:
On Wayland per output rendering is performed and paintScreen is invoked
for every output. Some effects need the information which output is
currently being rendered as otherwise e.g. FBO access could fail.
This change adds the current output geometry to ScreenPaintData. On X11
(all outputs one geometry) this information is not set and a null rect
is returned. That way the effects can also easily check which rendering
mode is used.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3058
Summary:
A shortcut with e.g. shift+w could not be triggered as shift is
considered as consumed. It transforms the keysym to an uppercase variant
thus it is consumed.
This change checks for the condition that shift is pressed and is the
only consumed modifier. If the current keysym is a letter the shift is
removed from the consumed modifier again to still support the shortcut.
BUG: 370341
FIXED-IN: 5.8.2
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3015
Summary:
If KWin interacts with Libinput the RelativePointerManager interface
gets created on the Wayland server. The ForwardInputEventFilter does
forward the relative motion events in addition to the normal motion
events.
In order to properly support the relative motion events as they are
expected by the Wayland protocol the handling of pointer motion events
got slightly adjusted:
* Libinput Pointer event extended by the additional data points
* Libinput Pointer event carries the delta as a QSizeF instead of
QPointF
* PointerInputRedirection adjusted to take a pointer motion event with
more arguments
* Custom QMouseEvent subclass adjusted to carry the additional members
The DebugConsole is adjusted to show the relative motion events in
addition to the global position.
Test Plan:
Verified the manager object is created and verified the
events in DebugConsole. Unfortunately not aware of any test application.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2979
Summary:
This implements the hideClient for ShellClient which was previously
not implmented. Also autotest for same is added.
Test Plan: ran autotest
Reviewers: graesslin, #plasma
Reviewed By: graesslin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3022
Summary:
KWin supports blocking global shortcuts when a window is active through
window specific rules. This change ensures that the modifier only
shortcuts also honor the blocking of global shortcuts. If global
shortcuts are disabled, they won't trigger any more.
BUG: 370146
FIXED-IN: 5.8.1
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2952
Summary:
If a key could be turned into a keysym with a modifier xkbcommon
considers the modifier as consumed even if not pressed.
E.g. Alt+F3 considers alt as consumed as there is a keysym gnerated with
Ctrl+Alt+F3 (vt switching).
This change tries to workaround the problem by ignoring the consumed
modifiers if there are more modifiers consumed than active. It's
possible that this will create regressions for other shortcuts - we need
to test it in the wild. Although this might cause regressions I'm aiming
for Plasma/5.8 branch with the change. It only affects Wayland and fixes
quite important shortcuts from window manager perspective (desktop
switching (ctrl+f1 to ctrl+f4), desktop grid (ctrl+f8), present windows
(ctrl+f9, ctrl+10), cube (ctrl+f11), user actions (alt+f3), close window
(alt+f4)). If it causes regressions they need to be fixed as well in the
Plasma/5.8 branch.
A new API entry point for xkbcommon was proposed, but is not yet merged
and there is no release with it yet. Once that is available the
workaround should get removed and replaced by the new API call.
BUG: 368989
FIXED-IN: 5.8.1
Test Plan: Going to restart session now with the change
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2945
Summary:
So far KWin tried to repeat all pressed keys which should repeat. But
this is not how X11 and e.g. QtWayland handle it. There only one key -
the last one which got pressed - repeats. And this makes sense as the
key is used to generate a keysym and that one KWin caches. Thus the
logic so far resulted in incorrect keysyms to be generated during the
repeat. E.g. pressing a, pressing b, releasing b would repeat b instead
of the hold a as b was the last generated keysym.
This change addresses this problem and let's only one key repeat at a
time. When the currently repeating key gets released the repeat timer is
stopped and other hold keys won't repeat any more. This also matches the
behavior of X11 and QtWayland.
BUG: 369091
FIXED-IN: 5.8.1
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2941
KWin supports disabling global shortcuts while a specific window is
active through window rules. This blocks global shortcuts but does not
block the modifier-only-shortcuts as the new test case shows.
CCBUG: 370146
Summary:
This change ports ScreenEdges to operate on AbstractClient instead of
Client. For this AbstractClient gained a new pure virtual method
showOnScreenEdge which is also implemented in ShellClient.
In ShellClient the functionality is bound for the case windows can
cover a panel. If triggered the panel gets raised again.
The auto hiding panel, though, is not yet implemented. For that the
protocol needs to be adjusted to give a hint to the compositor when to
hide and hint back to the panel when it was shown. This needs a change
in KWayland and thus is not 5.8 material.
Test Plan: See added test case
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2793
Summary:
This change adds support for resizing outside the window decoration
(e.g. setting borders to NoSide or None).
To support this a new Toplevel::inputGeometry() -> QRect method is
added which exposes the geometry adjusted by the margins provided by
the decoration. This is checked in InputRedirection when finding a
Toplevel at a given position. The logic for figuring out whether the
event should go to the decoration or the window already handled the
situation correctly, so no further changes are needed.
BUG: 364607
FIXED-IN: 5.8.1
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2787
Summary:
The quit button in the DebugConsole is connected to deleteLater on the
DebugConsole. This is to clean up resources like the input event filter
which is rather expensive to have running.
When closed through the window decoration the DebugConsole window only
got hidden but not destroyed. Resulting in the input filter to continue
processing.
This change ensures that the DebugConsole gets properly destroyed once
the window gets hidden.
BUG: 369858
FIXED-IN: 5.8.1
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2931
This adds a new test case for global shortcuts which simulates
triggering a shortcut through key repeat. The test verifies a problem
that the the shortcut continues to be triggered after releasing the key
if another key is still pressed (and triggers repeats).
CCBUG: 369091
This test simulates closing the DebugConsole through the window
decoration. Which unlike the dedicated button does not destroy the
DebugConsole.
CCBUG: 369858
Summary:
The PanelBehavior was incorrectly mapped to hasStrut resulting in too
many modes creating a strut for the panel.
CCBUG: 368499
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2788
Summary:
My compiler doesn't seem to like this constructor, it bails out with the
following error:
/home/sebas/kf5/src/kde/workspace/kwin/autotests/integration/globalshortcuts_test.cpp:
In member function ‘void GlobalShortcutsTest::testConsumedShift()’:
/home/sebas/kf5/src/kde/workspace/kwin/autotests/integration/globalshortcuts_test.cpp:79:40:
error: no matching function for call to ‘QAction::QAction()’
QScopedPointer<QAction> action(new QAction);
^~~~~~~
Using this as first argument fixes the build on my machine.
Test Plan: screenedges test fails, others pass. (this screenedges test failure seems unrelated)
Reviewers: graesslin
Reviewed By: graesslin
Subscribers: luebking, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2782
If a window gets opened which will be too large with decorations it
should get a configure event with a smaller size. This currently
doesn't happen as the test highlights.
CCBUG: 366632
Summary:
The interaction is changed to trigger the check for release from the
TabBoxInputFilter instead of reacting on modifier changes. That way
it's possible to check for the relevant modifiers getting released
instead of getting all modifiers in. Also this means that the checks
are only performed when relevant.
BUG: 368590
Reviewers: #kwin, #plasma_on_wayland, bshah
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2773
Summary:
A fullscreen ShellClient still had a decoration which was caused by
a combination of several bugs:
* when going to/from fullscreen the decoration was not update
* noBorder did not return true for a fullscreen window
* wl_shell emits fullscreen changed and maximized changed
Comparing to X11 Client both is done. So ShellClient needs to do the
same. This ensures that the correct geometry is requested when going
to fullscreen.
BUG: 366764
Reviewers: #kwin, #plasma_on_wayland, bshah
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2751
Summary:
When triggering global shortcuts we are more interested in the hold
keys than the currently active modifiers. E.g. capslock should not
be seen as "shift is hold". Similar we need to remove consumed
modifiers. Shift+5 is % and not Shift+% - the shift modifier is
consumed and needs to be removed from shortcut evaluation.
To support this we need to have the actual state directly from
xkbcommon. Thus a new method is added which exposes the modifiers
relevant for global shortcut matching. In addition on every key press
all consumed modifiers are calculated and kept so that they can be
used for shortcut matching.
In addition a workaround is added for Backtab. Similar workaround
exists in kglobalaccel for X11. The problem is that our shortcuts are
stored incorrectly: Shift+Tab instead of Backtab. Thus a mapping back
is required. To make everything worse KWin registers the wrong key
sequence "Alt+Shift+Backtab" which doesn't make any sense and is
broken on X11 at least.
The workaround supports both special cases. The one for Backtab should
be turned into Shift+Tab and also KWin's special case of adding shift
to backtab.
CCBUG: 368581
Reviewers: #kwin, #plasma_on_wayland, bshah
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2768
Summary:
The call to update the layer was performed before adjusting to
fullscreen. Thus the layer didn't get updated at all as it still
evaluated to "not fullscreen".
Reviewers: #kwin, #plasma_on_wayland, bshah
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2758
New test case to verify that global shortcut triggering works correctly.
First test case is to verify that consumed modifiers do not break the
shortcut. E.g. a shortcut registered for % should trigger on Shift+5 on
us layout. For that the modifier needs to be consumed, otherwise it's
Shift+% and doesn't trigger. As the test shows this is currently the
case.
Each test needs a dedicated dbus session as the test needs to register
services (e.g. kglobalaccel) and might fail if that cannot be registered.
Due to the wrapping in another command the test need to make sure that
any process they start terminates before them. E.g. the activities test
must stop kactivitymanagerd in cleanupTestCase, otherwise the test times
out.
Dedicated test methods for Alt+Tab and Alt+Shift+Tab. Both open three
windows and simulate one press with opening the TabBox. Alt+Tab should
move to the previous window in the chain, Alt+Shift+tab to the last
window in the chain.
Summary:
We used to have a toLower when reading the rule. This was removed with
4f7edb8 which turned it into a case sensitive matching to fix a
regression.
But this created another regression: existing rules written lower case
are no longer matched.
This change makes the role matching case insensitive again.
BUG: 367554
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2574
Summary:
So far TabBox used highlight windows by passing window ids around through
an X property. This doesn't work on Wayland where we don't have window
ids for our TabBox and the Wayland windows.
This change introduces a new Effect::Feature for HighlightWindows which
the HighlightWindowsEffect provides. The EffectsHandlerImpl has a new
method to highlightWindows which it delegates to that effect if it is
loaded by invoking a new performFeature method.
The TabBoxHandler now passes the highlighting to the effects system
instead of updating the x11 property. Thus this works on Wayland and
at the same time improves the X11 side by no longer having to go through
the property protocol.
Test Plan: Verified that Alt+Tab highlights the windows on Wayland correctly.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2630
In addition to normal client to fullscreen two more cases are added
which also go from a server side decorated window to fullscreen.
This highlights an issue that an incorrect geometry is requested.
CCBUG: 366764
Summary:
In order to add more tabs which can further help monitoring how KWin
handles some aspects the DebugConsole is changed to not take keyboard
input. This means it can only be navigated using pointer device or touch
screen.
This is needed for adding a new tab to monitor clipboard changes. On
Wayland sometimes windows don't get the clipboard, so it would be
helpful to have a debug monitor to see when the clipboard changes. But
for that debug console window may not take keyboard events.
To support this DebugConsole sets the WA_ShowWithoutActivating attribute
which gets honored by the InternalWindowEventFilter and does not forward
key events to such windows.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2620
Summary:
A not shown window may accept focus (e.g. when minimized). Given that
the condition was wrong and broke when making minimized windows not
shown.
This change takes the idea of not passing focus to a closing or unmapped
window directly into acceptsFocus. Which also means that this condition
now works for xdg_shell windows.
BUG: 368673
Reviewers: #kwin, #plasma_on_wayland, bshah
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2745
Summary:
KWin always has a few internal windows around which are not visible.
A QWindow created somewhere, but not shown. Such windows should not
be part of the stacking order.
If they are it breaks code which looks at the top most window in the
stacking order like e.g. SlidebackEffect.
This change ensures that the stacking order gets updated whenever a
ShellClient gets hidden and that internal windows with isShown being
false are excluded from the stacking order.
BUG: 364483
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2636
The X11 specific tests need to run on QT_QPA_PLATFORM xcb otherwise
they will crash. To enforce this without having to replace QTEST_MAIN
a Q_CONSTRUCTOR_FUNCTION is used to invoke a function which does nothing
except setting the env variable.
Summary:
The restore geometry gets initially set to 0/0xsize before the placement
is done. When going into updateClientArea and then afterwards into
AbstractClient::checkWorkspacePosition the geometry restory is used for
calculating the new position. This results in windows getting moved to
0/0 when e.g. plugging in a new screen or a panel changes, etc.
This change ensures that the restore geometry is set correctly after the
first placement.
BUG: 366696
Reviewers: #kwin, #plasma_on_wayland, bshah
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2627
This allows finding the Toplevel for a QWindow which is on Wayland a
ShellClient and on X11 an Unmanaged. This can be used to simplify
code when a Toplevel is needed for an internal QWindow without having
to do platform specific checks.
This adds a new test case which maps an OSD window and verifies that it's
positioned correctly. Then an additional screen is added which should not
affect the position, but as the test case shows: it does affect the
position.
CCBUG: 366696
The properties:
* maximizable
* moveable
* moveableAcrossScreens
* resizeable
Were only defined on Client instead of AbstractClient. This resulted
in the EffectWindow having those properties evaluate always to false
for a ShellClient and breaking some effects.
BUG: 355947
New test infrastructure which supports testing window rules at runtime.
Test exposes problem of window rules not able to match window roles in
a case insensitive manner.
CCBUG: 367554
Summary:
For Xwayland windows we observed that passing pointer focus to another
window does not trigger proper leave events on X. Which results in e.g.
tooltip windows to show after the pointer moved to a completely
different position on a completely different surface.
This is a bug in Xwayland which will be fixed in 1.19 (already fixed in
master). Given that there is a runtime version check. Although it's fixed
in Xwayland master it's worth to carry a workaround.
To circumvent this problem KWin warps the xcb pointer to 0/0 whever an
X window loses pointer focus. That way the X window gets a proper leave
through the X protocol.
This created a problem though: when giving focus back to the X window it
started to warp the pointer for maximized windows as KWin got pointer
motion events through the X11 event filter for positions on the window
decoration. These are passed into the screen edge filter which pushes
the pointer back and warps our Wayland pointer. To solve this problem
KWin no longer performs any actions for pointer motion in the X11 event
filter if not on X11. The event filter needs to be reworked and most of
it should be moved into the Platform API, if possible.
Test Plan:
Reproduced situations where one could see that pointer updates
don't trigger leave. E.g. going from a highlighted window to the decoration.
Reviewers: #kwin, #plasma_on_wayland, bshah
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2531
Summary:
The new logout design doesn't want to have the vignetting. Thus the
logout effect itself doesn't make any sense any more. All that would
still be used is the logout blur which can also be provided by the
blur effect nowadays for fullscreen windows. As the new logout is a
fullscreen window it should use that one.
The logout effect did one more thing: it kept the vignetting and the
blur once the user selected logout. Now without the vignetting this
would be weird and again doesn't make much sense any more.
So overall I think it's better to just drop the logout effect and use
blur effect in normal way. Neat side advantage: it will also work on
Wayland out-of-the-box.
Reviewers: #kwin, #plasma, #vdg
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2553
Removes one of the last pure XLib usages and also means that in theory
we can detect the Xwayland version number. In practice that only works
when restarting the compositor as detect is invoked before the XWayland
connection is created.
Summary:
This change introduces a Scripting::findScript method which returns
the AbstractScript. Thus a test can load a script, retrieve it and
trigger run on it. As the test would also need to know when finally
the test is running a signal is introduced to notify about it.
This makes the scripting ScreenEdgeTest way more reliable. The test
had been failing on both build.kde.org and build.neon.kde.org due to
not knowing when the script is loaded.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2497
Summary:
If caps lock is on the shift key should not trigger. Similar pressing
caps lock should neither on activation press nor on deactivation press
trigger the shortcut. Related to that are latched modifiers aka sticky
modifiers: if the modifier is still on after releasing the key the
shortcut should not trigger. We must assume the user wanted to use the
modifier to activate the modifier, not to activate the shortcut.
This change ensures that we don't track for modifier only shortcuts if
a modifier is active before press or after release.
The added test case demonstrates for caps lock, latched modifiers is
currently still untested. (Needs a way to mock it).
Test Plan: See test case for caps lock.
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2467
Summary:
The new effect is based on the mouse click effect and uses the same
rendering code (this could be improved by merging them better).
Unlike mouse click there is no keyboard shortcut needed to activate:
as soon as the effect is loaded all touch points are visualized.
The visualization creates an animated circle for each touch down
position, motion and up position. The ids are tracked and each touch
id gets the same color. The first ten different touch ids get a
different color. As touch ids are stable the first finger will always
have the same color.
Reviewers: #kwin, #plasma_on_wayland, bshah
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2464
Summary:
The Xkb class loads keyboard layouts from the users configuration. This
makes tests fail locally if the user has a layout which behaves
differently to the one the test expects. E.g. on a German layout the
right alt key is different to the one of US layout.
In order to have a more stable test base the env variable
KWIN_XKB_DEFAULT_KEYMAP forces the loading of the default keymap, thus
tests have a common layout set.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2466
Creating a dedicated method for the leave event on client.
This restructuring of the test should hopefully work around the
failing test condition on build.kde.org.
If the screen is locked the modifier only shortcuts should not trigger.
Also if the screen gets locked while a modifier is hold the shortcuts
should not trigger.
Reviewed-By: bshah
This extends the test helper for locking the screen and unlocking the
screen to also wait for the ScreenLockerWatcher to have that state.
This is going to fail on build.kde.org as we don't have EGL there and
the greeter crashes. This needs an extension to fake that we have a
screen lock window.
Summary:
So far when KWin intercepted a key event a leave was not sent to the
Wayland surface currently having keyboard focus. This could result in
the Wayland application to start repeating keys. E.g.
1. application gets key press event
2. This triggers an internal window to show
3. key release goes to KWin internal window
4. application starts to repeat key as there is no release
With this change whenever KWin intercepts the key event e.g. due to
* internal window
* Effects grabbing key event
* Tabbox
the focused keyboard surface is set to null, thus triggering a leave
event and the client not starting to repeat the event.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2402
Summary:
A new method to tell the effects system whether the compositor scene
is able to drive animations. E.g. on software emulation (llvmpipe) it's
better to not do any animations at all.
This information can be used by effects to adjust their behavior, e.g.
PresentWindows could skip transitions or effects can use it in their
supported check to completely disable themselves.
As a first step all scripted effects are considered to be unsupported
if animations are not supported. They inherit AnimationEffect and are
all about driving animations.
The information whether animations are supported comes from the Scene.
It's implemented in the following way:
* XRender: animations are always supported
* QPainter: animations are never supported
* OpenGL: animations are supported, except for software emulation
In addition - for easier testing - there is a new env variable
KWIN_EFFECTS_FORCE_ANIMATIONS to overwrite the selection.
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2386
The autotests are failing on build.kde.org due to the generated DBus
object path not being valid. This might be due to sysName having been
empty by default.
Summary:
The Connection exposes a new service called org.kde.KWin.InputDevice
and every Device registers an own object exposing all properties.
This allows an external configuration tool to change the behavior of
the devices at runtime. E.g. to test configuration settings.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2407
Summary:
We need to call Workspace::clientHidden when minimizing. Otherwise
Workspace doesn't update the active client and the now minimized
window is still active.
BUG: 366634
Test Plan:
Test case works now and also tested in nested setup that
active window changes.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2410
Summary:
If the user clicked a pointer button or scrolled a pointer axis the
held modifier was most likely intended to modify the pointer event.
Thus the modifier only shortcut should not be triggered.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2435
Summary:
The mouse polling is also used to detect mouse button press/release
events. This is used e.g. by the MouseClickEffect. The XInput2 filter
only selected for Raw Motion events which means mouse button events
are missed in case it's not combined with a motion.
This change makes the input filter also select for raw button press
and release events. To support this the X11EventFilter needed to
be adjusted to support multiple generic event types to filter for.
BUG: 366612
FIXED-IN: 5.7.4
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2406
If a pointer axis is scrolled while a modifier is hold, the modifier only
shortcuts should not trigger. The user wanted to use the modifier for the
pointer axis.
This is not implemented yet, thus all is QEXPECT_FAIL.
If a pointer button is pressed or gets pressed while a modifier is
hold, the modifier only shortcuts should not trigger. The user wanted
to use the modifier for the pointer button.
This is not implemented yet, thus all is QEXPECT_FAIL.
This test verifies the functionality of modifier only shortcut
activation. The base test case uses a helper object which is exported
to DBus and has a slot which can get triggered.
The test configures the individual modifiers to call that DBus method
when the shortcut is triggered. It simulates pressing the modifier and
verifies the DBus method was invoked or not.
client->isOnActivity("foo") will return true if the client is on no
activities, as that's the equivalent of saying we are on all activities.
In our case we do want to check activities() shows the right thing.
Verifies the condition from D1982 with expected_fail. That is sets
a Client on non existing activities and expects that it should be on
all activities.
Summary:
The Qualcom Adreno classes are recognized and a version detection
workaround is added for libhybris which only announces GLES version 2
although GLES version 3 is supported. KWin at least used to work with
GLES version 3 which gives us e.g. framebuffer blit.
Reviewers: #kwin, bshah
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2415
From libinput documentation:
Also optional is a feature called "drag lock". With drag lock disabled,
lifting the finger will stop any drag process. When enabled, libinput
will ignore a finger up event during a drag process, provided the finger
is set down again within a implementation-specific timeout.
From libinput documentation:
A tap immediately followed by a finger down and that finger being held
down emulates a button press. Moving the finger around can thus drag
the selected item on the screen.
Summary:
Plasmashell's desktop windows are RGBA which forces the compositor to
perform blending and render the background. That is absolutely pointless
as there is no window behind the desktop window it could blend to. All it
does is destroying KWin's more optimized code path and forcing additional
rendering which will never be visible (including shader push/pop).
With this change KWin forces desktop windows (both X11 and Wayland) to
be considered as opaque by setting the depth to 24. Thus blending is
disabled and the background is not rendered.
Test Plan:
Verified with apitrace that KWin goes in the opaque rendering
path for desktop windows.
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2382
Example data harvested from bugs.kde.org: open bugs against kwin with
a comment containing supportInformation.
We can see that especially detecting modern radeon gpus is not working.
Summary:
With this change KWin can create window decorations for internal windows.
Thus it's also possible to move internal windows and resize them which is
especially important for the debug console.
Reviewers: #kwin, #plasma_on_wayland, sebas
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2371
So far KWin's pointer surface enter handling was:
1. update fouced surface
2. update the global position
On client side this resulted in:
1. Enter with incorrect coordinates
2. move event to correct coordinate
With QtWayland this results in the case of multiple surfaces in one
application that Qt doesn't properly process the enter event and the
Window never getting pointer focus and not reacting on any pointer
input events.
The root problem is that the KWayland server API is not ideal for
supporting this situation. There is an API call for setting the global
position (which causes a pointer motion for the focused surface) and
an API call to update the focused surface. But a combination for both
is (still) missing.
This change addresses the problem by first unsetting the entered surface,
then updating the global position and afterwards setting the new surface.
Thus the position is correct. While this needs to be made better in
KWayland, this is an urgency bug fix to get the behavior correct and thus
first working around the API deficit and not first extending in KWayland.
Reviewed-By: bshah
The test LockScreenTest::testPointerButton and testPointerAxis both
fail on Neon's CI infrastructure. In order to make the test more reliable
the tests first wait for the pointer enter after unlock before simulating
another button press.
The test LockScreenTest::testPointerButton and testPointerAxis both
fail on Neon's CI infrastructure. In order to make the test more reliable
the tests first wait for the pointer enter after unlock before simulating
another button press.
Summary:
Gesture events are swipe or pinch events on a touch pad.
This change implements basic support by:
* wrapping them in LibInput::Event
* processing them in LibInput::Connection and emitting
dedicated signals
* Forwarding them in InputRedirection to PointerInputRedirection
* Support them in the internal input event filter
* Printing debug information in DebugConsole
Further handling is not yet done. In future the following should be
implemented:
* activating e.g. zoom and present windows on pinch/swipe gesture
* forwarding non global gestures to KWayland
Note that forwarding to KWayland is not yet useful as QtWayland does
not yet have support for the unstable protocol. No Qt application could
make use of it yet. So for the moment just global gestures is the best
we can get.
Test Plan: Looked at output of DebugConsole when triggering gestures
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2359
The new test can load "profiles" from kconfig files in the test data.
Based on that the glGetString return values are mocked and GLPlatform
can perform detect without having to interact with a real GL library.
That way we can verify that the detect code works correctly. As a first
test the settings of one Intel/IvyBridge is included. More tests can be
added easily (e.g. looking at various supportInformation output in
bugs.kde.org). Also this allows to more easily add detect code for GPUs
we do not know yet. And to simulate conditions where the detect code
failed resulting in no compositing at all.
So far KWin's pointer surface enter handling was:
1. update fouced surface
2. update the global position
On client side this resulted in:
1. Enter with incorrect coordinates
2. move event to correct coordinate
With QtWayland this results in the case of multiple surfaces in one
application that Qt doesn't properly process the enter event and the
Window never getting pointer focus and not reacting on any pointer
input events.
The root problem is that the KWayland server API is not ideal for
supporting this situation. There is an API call for setting the global
position (which causes a pointer motion for the focused surface) and
an API call to update the focused surface. But a combination for both
is (still) missing.
This change addresses the problem by first unsetting the entered surface,
then updating the global position and afterwards setting the new surface.
Thus the position is correct. While this needs to be made better in
KWayland, this is an urgency bug fix to get the behavior correct and thus
first working around the API deficit and not first extending in KWayland.
Reviewed-By: bshah
Summary:
This fixes a regression introduced with a1afeded6a.
The connections were setup every the windowShown signal got emitted.
This caused effects to get multiple singals and start multiple animations
which then do not get cancelled correctly.
The incorrect behavior was most visible in the translucency effect which
did not cancel the move animation and the window stayed translucent.
BUG: 366081
Test Plan:
New test case which simulates the behavior of the translucency
effect.
Reviewers: #kwin, #plasma, sebas
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2346
The capability tablet tool is new in Libinput 1.2. As build.kde.org
does not yet support this version, it's only an optional check.
So far the code only detects whether the capability exists and reports
this accordingly.
A new sub-directory scripting is added in autotests/integration to
gather all test cases related to scripting.
The first added test case verifies the activation of screen edges. For
that it loads a helper script, which reserves an edge based on config.
When the edge is triggered showing desktop is activated.
Summary:
This change ensures that KWin doesn't crash in the QPainter scene if
the compositor gets restarted and if there are Wayland clients.
BUG: 365471
Test Plan:
Test case added to scene qpainter which triggers a restart
of the Compositor with a window being shown. Verifies that rendering
is correct afterwards.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2185
Summary:
KWin needs to support restarting the OpenGL compositor in case of a
graphics reset event.
On Wayland the tricky part is that the applications should not notice
this. Most importantly KWin cannot just destroy the EGLDisplay and create
a new one. But this is how a restart works: the complete compositor gets
torn down and recreated - including the EGLDisplay.
This change moves ownership of the EGLDisplay to the Platform.
The AbstractEglBackend subclasses query the Platform whether there is
already an EGLDisplay. Only if there is no EGLDisplay the EGLDisplay is
created and only if no EGLDisplay is registered with Wayland the bind
is performed.
Another change is regarding the destruction: the AbstractEglDisplay does
no longer unbind the Wayland display and does no longer destroy the
EGLDisplay. The EGLDisplay is destroyed by the Platform - so very late
on application exit. The Wayland display is unbound when the Compositor
terminates.
Test Plan:
Limited testing with the added auto-test. This one needs to
be extended to fully verify that OpenGL applications continue to work.
But this requires build.kde.org to support OpenGL on Wayland.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2202
Summary:
Most platforms like the nested and virtual do not handle the outputs
themselves and WaylandServer announces the Outputs to Wayland.
So far this was static: at startup it got announced once to Wayland
and any changes were not catched.
This change makes WaylandServer listen to changes to the Screens and
sync them to Wayland.
Unfortunately KWin's internal Screen information is not sufficient to
properly synchronize this to Wayland and also Wayland by not supporting
adding/removing modes does not help.
Thus the solution implemented here is to add new outputs reflecting the
changes and then removing the old ones. This creates situations with more
outputs being present than actually there, but prevents that there are
no outputs at all.
Test Plan: Auto test added which verifies this for the virtual platform
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2233
Summary: Needed for e.g. the pager.
Test Plan: Test case for PlasmaWindow verifies the geometry
Reviewers: #kwin, #plasma_on_wayland, hein
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2200
Summary:
With this change auto-hiding panels are animated again by SlidingPopups
effect.
Test Plan: Test case adjusted, and tested in VM
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2157
BUG: 354407
FIXED-IN: 5.8.0
A test to simulate auto-hiding panels. Preparation step for making the
slidingpopups effect working again for auto-hiding panels.
The test case simulates creating a panel at the screen edge, hides it
through the property and shows it again through the edge.
Summary:
The WaylandServer creates the XdgShellV5 interface and hooks it up
to create a ShellSurface whenever an xdg surface or xdg popup is created.
ShellClient gains some new ctors for the different variants and is
adjusted to delegate to xdg surface respectively.
With this change KWin mostly supports xdg-shell protocol. Still missing
is support for the "geometry" request which is rather difficult to
implement in KWin.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2108
Summary:
This allows effects to animate when a window is shown again and when
a window gets hidden but not yet closed/destroyed. This situation
happens on X11 for e.g. auto hiding panels and on Wayland for pretty
much any window which properly unmaps (windowHidden) prior to destroy.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2084
Summary:
So far when a ShellClient got unmapped ready_for_painting was set to
false. That is the ShellClient was treated in the same way as a not
yet shown window. It was completely excluded from painting, a close
animation impossible.
This change makes use of the functionality available in
Client::hiddenInternal(). The window is considered as hidden, thus
still excluded from e.g. getting input events, but could be rendered
any time as we still have a previous window pixmap (if referenced).
This allows to have it considered in the rendering pass, but effects
still cannot make use of it as that state is not yet exposed to the
effects.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2083
Summary:
Have one dedicated method which performs the connection for both
Client and ShellClient. This fixes the desktopPresenceChanged signal
not being passed to the effects.
Note that not all signals are merged. Most signals setup for Client
don't make sense for ShellClient as ShellClient cannot block composite
or unredirect.
Test Plan:
Test case added for ShellClient to ensure that the signal
is correctly invoked on the ShellClient, Workspace and EffectsHandler.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2059
Summary:
If KWin fails to start the Wayland server due to XDG_RUNTIME_DIR not
being set, kwin_wayland should terminate with an error condition but
not crash.
This change makes sure that KWin detects that the Wayland server does
not work and terminates the startup early and ensures that it doesn't
crash while going down.
An error message is shown that we could not create the Wayland server.
Test Plan:
Test case added which verifies that WaylandServer fails to
init. Manual testing that kwin_wayland exits with error 1.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2078
The struts test is extended by a setup containing two horizontal
screens, bottom aligned with the left screen smaller than the right.
Thus there is a dead area in the top left corner. In addition there's
a panel on top left screen.
Apparently KWin allowed windows to open in the dead area. The test
case reconstructs this by opening a window with the same size hints,
but in the test it's working correctly.
A few more cases where we need to ensure that the created window is
destroyed before going into next test method.
Interesting observation: the generated window ids are identical.
Possible problem with KWayland::ClientConnection?
New test method which verifies that a newly mapped window is rendered
correctly, that cursor image set on it is rendered correctly, also when
pointer moves.
Summary:
Many tests create a Wayland window, render it and then wait till it's
created in KWin as a ShellClient. To reduce code duplication the test
helper provides helper methods to wait for the next ShellClient to be
shown and to directly render and wait for the window for that to be
shown.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2057
Summary:
A new namespace KWin::Test is added which provides a few helper
functions. It makes it easy to setup a KWayland client connection with
the base set to be able to create a Surface and flags to create
additional interfaces. This replaces the KWayland connection dance in
init() methods. For cleanup() there is also a dedicated helper function.
In addition there are helper functions to:
* render a surface
* create a surface
* create a shell surface
* flush the wayland client connection
* access to the created interfaces - for compatibility with existing code
The idea is to extend this Test library also for other common use cases
like creating an X11 connection and X11 windows, etc.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2053
Summary:
A dedicated cmake function is added to create a test case. It takes
a NAME, the SRCS and additional LIBS.
Thus it's
integrationTest(NAME myTestCase SRCS test.cpp)
to create a standard integration test.
In addition kwin_wayland_test.cpp is compiled into a static library
to decrease the compile time a little bit.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2052
Summary:
The idea behind this autotest is inspired by bug 356328 which produced
incorrect rendering results. Also it's inspired by openQA which performs
image reference comparisons.
This test case tries to go further. It creates reference images which
must match the rendering result exactly. So far the test case verifies
the start condition - kwin started and one frame is rendered with default
cursor in the middle of the screen. And it verifies the moving of the
cursor without any windows shown. Whenever the cursor moves a repaint
should be triggered and the old and new area should be properly
repainted.
To support this the test needs some minor changes in KWin:
* Scene provides a frameRendered signal - needed for waiting on frame
* Scene and SceneQPainter are exported
* SceneQPainter provides access to it's Backend, so that we get to the
backbuffer
* ScriptedEffectLoader is exported for getting a list of all scripted
effects - (we don't want fade to manipulate the rendering)
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2046
Test was failing on build.kde.org, though passing locally. This change
tries to make the test more robust to timing issues which makes it
hopefully pass on build.kde.org again.
Summary:
It's mapped to be on all desktops in order to properly have tooltips
show for the panel (which is on all desktops) instead of just on the
desktop it's created.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2032
Summary:
The clipboard sync is done by a dedicated helper binary launched by
KWin. This helper binary is forced to xcb platform to piggy-back on
Qt's implementation of the X11 clipboard. In addition it implements
the Wayland clipboard - which is much simpler. Reading the Wayland
clipboard is based on the implementation in QtWayland.
KWin internally knows the DataDeviceInterface belonging to the helper
application. Whenever an xwayland client is focussed, this DataDevice
is allowed to set the selection and KWin manually updates the current
selection in the SeatInterface. By that the sync from X11 to Wayland
is implemented. When afterwards a Wayland client is selected, it's sent
the current selection which references the X clipboard and a data
transfer can be initiated in the normal Wayland way.
For the other direction KWin sends the current selection to the helper's
DataDevice whenever an xwayland window is focused. The helper application
reads the Wayland clipboard and sets it on the X11 clipboard. Thus the
Wayland clipboard is synced to X11.
The approach used here will also be useful for implementing a clipboard
manager (aka klipper).
Currently the implementation is not yet fully completed. We need to
make sure that the helper application gets restarted in case of a crash.
Test Plan: See added test case
Reviewers: #plasma_on_wayland, #kwin
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1973
This testcase tries to emulate the panel setup on the phone,
- Window placement strategy is set to maximizing
- Top panel with height of 60
- Bottom panel with height of 150
However this is still not complete testcase, some todo items:
- Create Plasmashell desktop window before creating panels
- Create normal window and verify if its placement/position is right
Reviewed-by: Martin Gräßlin <mgraesslin@kde.org>
Summary:
Sets notifications on all desktop and doesn't activate them.
Unfortunately doesn't work on Plasma yet. Seems the windows don't get
tagged properly.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1930
Summary:
For XWayland windows the window might be activated before the Wayland
Surface is set for it. Thus the keyboard focus is not passed to the
window. Only on the next activate after the window got created the
window got keyboard focus.
This change addresses this problem by emitting a signal from Toplevel
when the surface changes. The KeyboardInput listens to this signal
for the active client and updates keyboard focus again if the surface
changes. Thus keyboard focus is properly passed to XWayland windows.
Test Plan:
Test case which creates an X11 window is adjusted to verify
the condition.
Reviewers: #plasma_on_wayland, #kwin
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2009
Summary:
With the NoBorder option set the DecorationBridge won't create
decorations. Thus we get a nullptr and obviously should not call
into it. There was already a check for whether decoration is null,
so that is a rather embarrassing bug.
Test Plan: Test case added which exposes the crash
Reviewers: #plasma_on_wayland, #kwin
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1980
Summary:
Plasma's OSD windows were stealing focus on Wayland. We can be sure
that they should not get keyboard focus, so a check to acceptsFocus
is added.
Reviewers: #plasma_on_wayland, #kwin
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1927
Summary:
When a ShellClient gets unmapped and mapped again the signal windowShown
gets emitted. We need to handle this in Workspace to ensure the window
is in the proper layer and gets focus.
This fixes applications like KRunner/Yakuake not having focus on a
second show. Unfortunately it also brings back the problem that
notifiations steal focus (this needs to be fixed by passing a proper
window type to a notification).
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1864
Summary:
The checks in Client::adjustedClientArea were a little bit too
agressive, excluding also valid setups.
This change addresses the regression by keeping the actual intended
improvements in place.
The check in Client::adjustedClientArea is now only done for the
special case of desktopArea == area. This ensures that a strut excluding
a complete screen won't affect the overall workarea.
In addition new checks are introduced in Workspace::updateClientArea.
When calculating the new sareas a check is performed whether the
intersection with the adjustedClientArea would result in the sarea
becoming empty (thus a screen being completely removed). If that's the
case the geometry is ignored to not exclude a complete screen.
Interestingly I should have noticed that something with the logic is
odd. As the test case had two commented geometries which we now get.
BUG: 363804
Reviewers: #plasma, apol, lbeltrame
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1744
Summary:
The idea is to not send multiple resize requests to a client when we
know that we might have multiple geometry changes. E.g. when going
from maximized to restored the borders change and trigger a resize in
addition to the resize from switching to restored.
The implementation is inspired by the GeometryUpdateBlocker.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1808
Summary:
This ensures that we don't send a size request with the borders still
added.
Test Plan:
Verified that a maximized window is properly sized and
doesn't have empty borders
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1807
Summary:
When a shell client got mapped, unmapped and mapped again we emitted
the shellClientAdded signal in WaylandServer again. This resulted in
e.g. Workspace, EffectsHandler, etc. to start managing the window again.
This can be a reason for problems we see with such windows like the
Plasma panel dialog when opened the second time.
Test Plan:
Needs extensive testing on real world system as that changes
behavior now.
Reviewers: #kwin, #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D1784
Summary:
The method xRenderBlendPicture created a static XRenderPicture on
first usage. To cleanup a XRenderPicture an xcb_connection_t* is needed.
As it's static the cleanup happens on exit handler and at that time Qt
already destroyed the xcb_connection_t*. With a certain chance this will
crash.
To expose the problem a Q_ASSERT(qApp) is added in the destructor of
XRenderPicture. Using xrenderBlendPicture() will hit this assert on
application exit. This is demonstrated by the added auto test.
The actual fix to the problem is moving the static variable out of
the method and introduce a global cleanup method just like the init
method. This is now called from Workspace dtor, so before application
goes down.
CCBUG: 363251
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1731
Summary:
This ensures that resizing a panel updates the client area. On X11 there
is an event when the struts change, but on Wayland the struts are implied
from window type (panel) and the panel behavior, so we need to trigger it
manually.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1811
Summary:
The implementation was broken as it transformed the QRects into QRegions,
subtracted the geometries and took the bounding rect again. In several
setups this could result in the strut getting ignored.
This change improves the calculation of the struts by creating a QMargin
which describes the area which needs to be subtracted from a screen rect.
The QMargin is only adjusted for the edge the window borders. We can
assume that a window with a strut needs to border a screen on Wayland.
With this change we are also able to support panels between screens.
On Wayland a panel placed on the right of a left screen affects the
maximization area of the left screen, but does not affect the overall
workarea.
CCBUG: 167852
Reviewers: #plasma_on_wayland, #kwin
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1803
Summary:
From the famous category: "How could that code ever have worked".
Maximized state changes were never passed to window decorations. For
X11 windows the decoration updated the state nevertheless, for Wayland
windows the state did not get updated, thus a maximized window had
borders and was shown with a not maximized button.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1805
The added test exposes the problem that a shell surface might request
being maximized and then provide an incorrectly sized buffer. In this
case the ShellClient is incorrectly considered as maximized.
I don't have a good idea how to address this yet, but still publish
the test case exposing the problem.
Summary:
So far destroyWindowManagementInterface was only called when the
ShellClient got unmapped. But it's possible (although not recommended)
to just destroy the Surface without prior unmapping. In that case the
PlasmaWindow got leaked.
This change addresses this problem by always calling
destroyWindowManagementInterface from ShellClient::destroyClient.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1762
Summary:
If a PlasmaShellSurface is a Desktop, a Panel or an OSD it implies
that the window is on all desktop. So let's set it like that.
Test Plan: Auto test added and also confirmed by manual testing
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1747
Summary:
We don't want external processes to know anything about the lock screen
windows. Especially we don't want them to be able to request close on
them.
Thus better never show thus windows to them.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1760
Summary:
For some windows we don't want to create a PlasmaWindow. Not all
ShellClients are something the outside world should see. This change
introduces the first restrictions:
* KWin internal windows are hidden
* transients not accepting focus are hidden
The latter case doesn't work though if the Surface is mapped prior
to creating the shell surface. In such a situation it's racy as KWin
handles the create surface request before we get the setTransient
request. This is difficult to handle as we do want to react quickly.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1759
OpenGL/EGL doesn't work on build.kde.org. Because of that the
kscreenlocker_greet aborts on startup and we cannot really test whether
it works on build.kde.org. E.g. we never actually see the window.
This change just makes sure that QMLSCENE_DEVICE=softwarecontext is
passed to the greeter in the LockScreenTest. Hopefully that fixes it
on build.kde.org.
The new added test case verifies a few cases in which a PlasmaWindow
should or should not be created or destroyed.
Some cases are clearly wrong and are marked with expect_fail.
This test mocks part of KWin::Udev, udev and libinput. The test itself
is still rather limited and only verifies whether libinput is valid or
not and that assignSeat works. Most of the interaction is not yet tested,
though to a large degree doesn't make sense and should be rather tested
in the context of LibInput::Connection.
The test case sets up apol's screen setup and the panel as described
in the attachements in bug 363804. As the test shows the panel's strut
is incorrectly ignored.
CCBUG: 363804
This new test includes everything used in events.cpp to the mocked
functionality of libinput. Only key event is implemented so far, the
referenced pointer and touch functions are mocked with default values.
The test verifies that a KeyEvent gets created and the key press/release
works as expected.
Summary:
The signals emitted by LibInput::Connection carry the Device for which
the input event was received. This Device is passed to the input handlers.
Custom event classes are added which extend QMouseEvent, QKeyEvent and
QWheelEvent respectively and expose the Device. The Device is only passed
around as a forward declared pointer, so even if compiled without libinput
support, it should still compile.
Event handlers which need to get access to the Device can now just cast
the event pointer to the custom class and access it. This can be used in
future to handle device specific key codes, etc.
As we don't have a proper event classes for touch events the event
handlers do not yet have access to the Device. Here the internal API
needs to be adjusted in future.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1667
This reverts commit abe582c27d.
To explain: the test uses a mocked implementation of libinput. Because
of that it must not link against libinput. The whole idea is to not link
libinput.
So I'm reverting the addition of libinput to linkage. I don't know the
build error, if it gets presented to me, I'll fix it properly without
having to add a linkage to libinput.
Summary:
Device has a static QVector<Device*> into which each created Device
is added and provides a static method to match a libinput_device* to
the already created Device.
This can be used by the the libinput Event class wrapper to properly
reference the Device the event is for.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1665
Summary:
Qt's touch event API is rather difficult and complex to implement.
As none of KWin's internal windows supports multi-touch gestures yet,
this is going the easy route and just simulates a left mouse button
press. If in future need arises for touch gesture support on KWin's
internal windows, this can be added.
Test Plan: Tested on exopc with DebugConsole and auto test
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1661
It's currently failing on build.kde.org. I'm not able to reproduce the
failure localy so I can only interpret the failure. The failure looks
like a window is still present in the next executed test case thus
breaking the positioning.
This change ensures that the window is properly gone before going into
the next test case.
Summary:
The usage of libinput is completely mocked. The test covers all the
constant properties read by Device.
There are some features which are not yet tested:
* alphaNumericKeyboard
* supportedButtons
* enabled
The setters for leftHanded and pointerAcceleration are also covered
including the variants where it can fail.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1648
Summary:
Touch events are emulating mouse events, in particular left mouse
button.
With this change one can move windows through the decoration, use
the decoration buttons and also support the double click action.
As finding the decoration is pretty much exactly the same as for
pointer events, a new base class is introduces which provides the
functionality of updating the decoration and the shared common
variables.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1604
Summary:
Mouse actions like wheel and double click were restricted to the titleBar
area. This made the top most pixel non-interactive as it's not part of the
titleBarArea.
This change makes the complete titlebarPosition interactive. That is it
includes for a "normal" (top) setup also the TopLeft/Top/Right section.
Thus the top most pixel can be double clicked, mouse wheeled, etc.
For the Wayland case the test case is adjusted.
BUG: 362860
FIXED-IN: 5.7.0
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1596
Summary:
The delay to next cycle dance is needed for Aurorae. Maximizing a
window can result in the decoration being destroyed, in which case
QtQuick can trigger a crash.
A test case is added to simulate the situation and ensure that maximize
still works also after the change.
BUG: 362772
FIXED-IN: 5.6.5
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1586
Summary:
This ensures that QWindow::setMask works for KWin internal windows.
Without KWin sends all pointer events to the QWindow, even if the
mask says it shouldn't get events.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1509
Summary:
Instead of having the Application invoke initOutputs after creating
the Screens, we can just connect to the signal emitted there.
This allows to make initOutputs a private, WaylandServer internal
method.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1482
