Summary:
Recently a KSharedConfig was introduced in RuleBook. It makes sense to
also use it in save and not just in load.
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12747
Summary:
We used to recreate the KConfig when rules needed to update. Now that it
is a KSharedConfig, which is kept, it needs to be reparsed as it changes
outside of KWin.
BUG: 393788
FIXED-IN: 5.13.0
Test Plan: Restarted session, changing rules work again
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12706
Summary:
Our rule handling has had a grave error for years. Whenever a window
with a rule was openend or closed the kwinrulesrc was written back to
disk.
The reason for this behavior is that temporary rules need to be discarded
once they were used. For that there is a method discardUsed which invokes
requestDiskStorage whenever a rule for the window was found. But it did
not check whether there was a rule requiring this.
This change modifies the discardUsed to track whether it changed a rule
and only writes back in case there was a change.
BUG: 393911
FIXED-IN: 5.12.6
Test Plan: Only compile tested
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12749
Summary:
The drm platform has a special handling for touch events while the
screen is in dpms. All touch events are filtered out, but a double
tap wakes up the screen.
Due to the filtering out of the events the idle timers were not reset.
So if you only double tapped, the screen turned on, but not off again.
This change updates the timestamp after double tap, so that the idle
timers are restarted. All other events are still filtered out, to not
have "fake" events (e.g. smart phone in pocket) wake up the device.
BUG: 392754
FIXED-IN: 5.12.6
Test Plan: only compile tested
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12668
Summary:
Changing the creation of the nested window from unstable v5 to v6 in
order to be supported on more compositors and to use KWin's better
supported platform.
Targeting 5.12 as this will help to remove support for unstable v5
from KWayland.
Test Plan: Run a nested KWin/Wayland on KWin/Wayland, everything looked fine
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11806
Summary:
BUG: 393253
FIXED-IN: 5.13.0
Test Plan: manual testing and new unit test
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12633
Summary:
From Wayland documentation:
"When a seat's focus enters a surface, the pointer image is undefined and
a client should respond to this event by setting an appropriate pointer
image with the set_cursor request."
KWin's interpretation so far for the undefined pointer image was to
remove the pointer image when entering a surface waiting for the client
to set a cursor image. This can result in a short flicker as there might
be a frame without a cursor image.
This patch changes the behavior by keeping the previous image till the
application set a new one. This brings some advantages:
* if the application is not responding a cursor is still shown
* if the same cursor is used as in the previous window we don't have a
flicker
CCBUG: 393639
Test Plan: I cannot see the flicker, so only tested with the adjusted tests
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12631
Test Plan:
Very minimal expansion of unit tests which uses WaylandScreens
Wrote mini app to debug actual output of xdg-output for testing the DRM code
Main relevant user of this is xwayland > 1.20 which I don't have, so that
part remains untested
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: romangg, graesslin, bshah, kwin
Tags: #kwin
Maniphest Tasks: T8501
Differential Revision: https://phabricator.kde.org/D12243
Summary: For more details, see D12452.
Reviewers: #kwin, davidedmundson, fredrik, mart
Reviewed By: #kwin, davidedmundson, mart
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12466
kwinswitcher.knsrc, kwinscripts.knsrc, kwineffect.knsrc
It seems the kwineffect.desktop was (and still is) invalid, as it
does not show up in `kpackagetool5 --list-types`.
To test, I overwrite the /etc/xdg/*.knsrc,
then opened the GHNS dialogs and installed stuff.
Differential Revision: https://phabricator.kde.org/D12249
Summary: There are two cursor caches: m_cursors and m_cursorsByName. The second doesn't ever seem to be cleared.
Reviewers: #kwin, davidedmundson, graesslin
Reviewed By: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12542
Summary: Use the blur effect even while the window is being maximized/unmaximized.
Test Plan:
Before:
{F5828510}
After:
{F5828511}
Reviewers: #kwin, #vdg, graesslin, ngraham
Reviewed By: #kwin, #vdg, graesslin, ngraham
Subscribers: ngraham, graesslin, zzag, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12623
Summary:
Use the blur effect even when the present windows is used.
Previously it was only enabled for the close buttons and the dock.
Test Plan: {F5828442}
Reviewers: davidedmundson, fredrik, #vdg, #kwin, graesslin, ngraham
Reviewed By: #vdg, #kwin, graesslin, ngraham
Subscribers: ngraham, zzag, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12619
Summary:
`QGuiApplication::primaryScreen()->logicalDotsPerInch()` sometimes reports incorrect scale value, for example 95.951 (or even lower) instead of 96.0 at 1x scale and this caused to simply darken blurred areas instead of noising them.
This patch sets a minimum 1x scale for the noise texture, because realistically we will never be below that.
Reviewers: davidedmundson
Reviewed By: davidedmundson
Subscribers: davidedmundson, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12519
This reverts commit 8a2a00a4ca.
It was likely wrongly pushed before the KWayland changes, so it won't
compile.
Feel free to reinstate it once the dependent changes (KWayland) are in.
CCMAIL: bundito@gmail.com
CCMAIL: kwin@kde.org
Summary:
Adding "SkipSwitcher" to the API, following discussion in
BUG 375921
Depends on / related to D11925 and D11924
Reviewers: hein, #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: davidedmundson, #plasma, ngraham, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11926
Centralise resolution-dependent computation into the leaf cursor class.
Listen to scale changes and update the cursor when it happens
Reviewed by David Edmundson
Summary:
When you have two windows ontop of each other and you turn them
transparent, evidently you'll be able to see through them.
Not only does it look unpolished if the desktop window flashes through
your windows, it can pose a privacy risk as you'd be able to briefly
look through the lock screen.
This patch fades apps to black intead of to transparent. As this looks
weird for panels, so windows are also faded to opaque (if relevant) at
the same rate.
BUG: 388384
Reviewers: #plasma, graesslin
Subscribers: luebking, plasma-devel, kwin, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9608
Summary:
When using composite key combinations, kwin would do random weird
actions when the first key was pressed (e.g. ` key). This makes sure we
are not trying to match.
BUG: 390110
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12416
Summary:
When using composite key combinations, kwin would do random weird
actions when the first key was pressed (e.g. ` key). This makes sure we
are not trying to match.
BUG: 390110
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12416
Summary: TTYs are only available for seat0, so when starting a framebuffer kwin on seat1, it never draws, because drawing is always suspended, because it is being treated as not active
Test Plan: The framebuffer backend draws on seat1, and /dev/fb1 and when I switch back to my Weston greeter, (when it's also using the frame buffer,) it doesn't try to draw on top of it.
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: davidedmundson, rkflx, graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9574
