Summary:
With this change the Wayland platform plugin uses the XdgShell to
create the window if available. This allows to close the window and
thus quit the nested kwin_wayland properly.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2201
Some error conditions did not have a warning, so all we got is
"Could not initialize rendering context". Which is not helpful to
figure out what is going wrong.
For virtual machines with Cirrus device the drmModeAddFB fails. So
far there was no error message at all, we only saw it failed.
With this change the drmModeAddFB is checked for error and a warning
is shown. Also further debug messages are added for other cases where
things can fail.
Reviewed-By: Eike Hein
Summary:
So far if the framebuffer platform run into an error on initialization
it did not continue and caused the system to freeze. With this change
it properly emits the initFailed signal in all error conditions which
causes kwin_wayland to terminate. This is a much better situation than
just staying in a running, but frozen state.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2149
Summary:
If it's not possible to create a buffer to blank the output, KWin won't
be able to render to the output. In that case the output should not be
added to the list of outputs.
To support this DrmOutput::blank and DrmOutput::init return bool to
indicate whether they succeeded. DrmBackend handles this situation and
doesn't add the output to the list of outputs if init failed.
If after init there are no outputs KWin is in a state where it won't
be functional. Thus the platform emits the initFailed signal to
terminate.
BUG: 365242
FIXED-IN: 5.7.2
Test Plan: No hardware to reproduce the condition
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2135
Summary:
If the format of the framebuffer is BGR we cannot create an RGB image
format from it - the rendering is incorrect. Unfortunately QImage does
not support a BGR image format.
To solve this problem we still use an RGB image format but on rendering
the front buffer is rgbSwapped to convert the RGB image to a BGR image.
BUG: 365243
FIXED-IN: 5.7.2
Test Plan: Tested on a neon kvm
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2134
Summary:
No need to delegate the painting of the software cursor into the backend.
The core has enough information to perform the rendering itself.
This change means less code duplication and all platforms which might use
a software cursor in QPainter compositor gain support for it without any
further adjustments.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2028
Summary:
So far the drm platform did not verify whether creating and mapping a
DrmBuffer for a cursor works. This could result in a crash in the worst
case.
This change verfies whether mapping the two cursor buffers works, if
not software cursor is enabled. The code is adjusted to ensure that
none of the cursor buffers is accessed in case software cursor are
enabled.
Please note that right now the drm platform's rendering does not
support software cursors. Thus currently this change results in no
cursor at all. This will be addressed by following patches.
BUG: 364740
FIXED-IN: 5.7
Test Plan:
Verfied that it properly falls back to software cursor,
but could not verify that the crash is actually fixed.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2026
Summary:
Platform::setSoftWareCursor creates connections to the Cursor in order
to trigger repaints whenever the cursor position changes. The Cursor is
created before Platform::init is called, but after the Platform is
created. Thus the call needs to happen in init, otherwise the cursor
is not rendered correctly.
BUG: 356328
FIXED-IN: 5.7.0
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2025
Summary:
When we get a configuration request, we also need to update the global
position on the DrmOutput, otherwise Wayland will know about the new
position, but KWin internally does not.
In addition we also need to trigger the changed signal on KWin::Screens,
so that internally code can react on the change.
With this change configuring layout of connected screens in KScreen
does work also in KWin.
Reviewers: #kwin, #plasma_on_wayland, sebas
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1858
Summary:
To use eglCreateImageKhr for an X11 pixmap we need an EGLDisplay created
for the same XDisplay as the X11 pixmap. This means if we created an
EGLDisplay for a GBM device, we are not allowed to load a texture from
the X11 pixmap and can result in a crash in the driver.
Similar in the nested X11 setup the EGLDisplay is created for the
rendering window, but the X11 pixmaps are from the Xwayland server KWin
started. They don't belong to the same windowing system.
This change addresses this problem by moving the loading of X11 pixmaps
from AbstractEglTexture to EglTexture of the EglOnX11Backend. Thus for
any usage on a non X11 platform we cannot hit the code path any more.
In addition the nested X11 platform can indicate that it doesn't support
it and thus also doesn't go through the code path.
Test Plan: Tested standalone and nested X11 platform
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1857
We didn't check whether creating the QPlatfromInputContext worked and
accessed the m_inputContext unconditionally which obviously crashed.
Now the connects related to QInputMethods are not setup if we failed
to create the QPlatfromInputContext.
Reviewed-By: bshah
Summary:
The idea is to have KWin provide a virtual keyboard. To support this
KWin uses the QT_IM_MODULE qtvirtualkeyboard and makes sure that the
QPA plugin loads it.
KWin has a new class VirtualKeyboard which acts as the focus object and
the "proxy" for input methods. The QPA plugin ensures that this is the
focusObject, so that all input method related events are sent to this
class. From there it will be possible to delegate to other applications
through the Wayland interfaces.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1638
A signal is added to the VirtualBackend to change all screen geometries.
This can be used from auto tests to change the screens. But it's not yet
correctly reflected in other areas. E.g. not forwarded to Wayland Output,
etc.
Summary:
When the pointer device gets plugged off the cursor is hidden, when
a pointer device gets plugged in the cursor is shown again.
This allows to easily turn a tablet into a proper system by showing
the cursor only when it makes sense.
Test Plan: Tested on exopc with external mouse
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1682
Summary:
A new virtual method createOpenGLSafePoint is added to Platform.
This is invoked through the Compositor with a PreInit and a PostInit
argument pre and post creating the SceneOpenGL.
The Platform plugin can implement this and use it for detecting whether
creating the OpenGL compositor on this platform crashed in the past.
Thus it's the base for the openGLIsBroken platform check.
The x11 standalone plugin is the first to implement this functionality
using the previous code which was designed for X11.
This also means that a crash of the OpenGL compositor during init on
Wayland won't result in OpenGL being disabled.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1582
Summary:
So far the OpenGL is unsafe check functionality in Compositor disabled
OpenGL compositing if glx is not available and we are in standalone X11
mode.
This is technically no longer correct for quite some time. Just because
GLX is not available doesn't mean that OpenGL doesn't work. We have an
EGL backend. So let's try to use that if glx is not available.
This change removes the check completely from Compositor. Instead the
standalone x11 plugin checks whether glx is available prior to createing
the glx backend. If not available it falls through to the egl backend.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1581
Summary:
CompositingPrefs is only relevant for X11 standalone. It had some
"hacks" to make it not block Compositing on Wayland. Thus it was in
its current form not really useful.
Now all the functionality is provided through Platform with a default
implementation which is sensible for Wayland platforms.
The X11 standalone platform implements the new methods with the
Wayland checks removed.
In addition all calls to CompositingPrefs now go through the platform
directly and CompositingPrefs is completely dropped.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1576
Summary:
This change reduces the windowing system specific code pathes. Instead
of checking whether we are on X11 or Wayland to decide whether
compositing is required, we just ask the Platform.
The default is true, only x11 standalone allows to not require
compositing.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1575
Summary:
If a user specifies the QT_WAYLAND_FORCE_DPI env variable, KWin uses
it to force a logicalDPI, just like QtWayland.
Test Plan: Normally sized window decorations
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1605
Summary: This seems to just have been forgotten here.
Test Plan: Builds
Reviewers: graesslin
Reviewed By: graesslin
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1499
The hwcomposer plugin doesn't need it. It was only created for the
need of libinput relying on it. As libinput doesn't need it any more,
hwcomposer doesn't need to integrate with VirtualTerminal.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1444
Removes a diversion between X11 and Wayland. The base class Platform
creates an instance of class Edge with plugin implementations being
able to create a different type.
The X11StandalonePlugin does that and creates a WindowBasedEdge. For
this the implementation of WindowBasedEdge is moved from screenedges
into the plugin.
Unfortunately an ifdef is needed to make the screenedge test still
work as expected. This should be improved in future, e.g. have a good
way to load the platform plugin from the tests.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1419
Summary:
KWin's plugins are now all in a plugins subdirectory. This is a good
argument to also move the window decoration plugins there. The name
clients was not really good anyway and makes it difficult for people
not familiar with the code base to find it. Having it under plugins
is the more expectable location.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1414
Summary:
The EglOnXBackend is no longer needed in the core. It's only needed by
the two x11 platform plugins. To best share it, it's moved into a common
directory and compiled into a static library which in turn is linked by
the two plugins.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1413
Summary:
It's only needed by the standalone x11 variant. This allows us to
simplify the creation of the OpenGLBackend: it's created by the
platform plugin - we don't need custom complex logic.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1392
By moving XRandrScreens the creation of screens gets simplified a lot
as there is no need to have windowing system specific init code. It all
just goes through the platform.
This also marks the point where the first X11 specific code is removed
from kwin_wayland.
Reviewers: #plasma, sebas
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1355
The plugin does not much. It's the most basic plugin we can have to
be loaded from kwin_x11.
Unlike the wayland platform plugins it gets installed to:
org.kde.kwin.platforms
Summary:
Source code reorganization:
The base class AbstractBackend got renamed to Platform, thus the
"backends" are "platforms" now. As they are plugins they should go
together with other KWin plugins which are nowadays in the folder
plugins.
So new location is plugins/platforms/
Reviewers: #plasma, sebas
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1353
Summary:
Mostly intended for plugins loaded into KWin and wanting to use
KWayland::Client::ConnectionThread::roundtrip(). By providing this
function we can ensure that KWin does not block and nevertheless
perform the required roundtrip.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1153
Qt has problems initializing everything correctly if there is no screen
at startup. E.g. the breeze widget style tries to initialize some pixmaps
and this fails. In worst case hitting asserts in Qt (debug build).
This change creates a dummy screen which gets destroyed as soon as there
is a real screen.
Reviewed-By: notmart and sebas
This makes QCursor::pos and QCursor::setPos function correctly. KWin
actually wouldn't need it as KWin has the KWin::Cursor replacement, but
it allows Qt internal API to have it function correctly and also the
zoom effect does use QCursor::setPos.
We need to also destroy all idle objects when we tear down the
internal client connection. Otherwise the cleanup tries to free
the object after our Wayland connection is already destroyed.
During startup it might happen that the QPA is already loaded, but
the wayland server and it's internal connection not yet fully
created. Thus safety check for it.
This is needed to make KWin build-able on non-Linux, but is actually
only a workaround. The dependency should also be available on non-Linux.
This disables the EGL integration in the Wayland backend (QPainter still
available) and the EGL fallback in the qpa plugin (preferred context
sharing still available, but requires a working OpenGL Scene).
REVIEW: 126202
ASAN righly complained: we need to delete our Wayland objects before
we destroy the internal client connection. Solved by better setting
parent relationships in the QPA plugin and correctly delete objects
in destroy of internal client connection.
We need to destroy the compositor after Xwayland terminated and after
the internal Wayland connection is destroyed. This means when destroying
the Workspace we may no longer destroy the Compositor at the same time.
Also we need to ensure that other tear down functionality doesn't call
into the no longer existing internal client connection.
With this change kwin doesn't crash when exiting with Wayland and/or
X11 windows still open.
Basically a simplified fork from kwayland-integration.
We cannot use the idletime plugin from kwayland-integration as it
a) doesn't react on our own qpa plugin name
b) performs blocking roundtrips in the main thread -> freeze
This simplifies by using our internal registry and we don't even check
whether Seat and Idle are announced: we know they are.
Reviewed-By: Bhushan Shah
KGlobalAccel plugin gets deleted by a global static. At that point
InputRedirection is already deleted but the plugin holds a static pointer
to it.
This change connects to the deleted signal by InputRedirection and
ensures that the plugin doesn't call into the deleted code any more.
This is the beginning of a new testing era for KWin: finally we are
able to test against a running KWin. This works by making use of the
new virtual framebuffer backend for Wayland. It starts a specific
Application subclass which is mostly a fork of ApplicationWayland.
The individual tests are able to influence the socket name and the
size of the virtual screen. This is supposed to be done in
initTestCase. To know when KWin is fully started one can use the
workspaceCreated signal of KWin::Application. KWin is not started in
another process, but the kwin library is used, so the test has pretty
much full introspection to everything going on inside KWin. It can
access the Workspace, WaylandServer, fake input events through
InputRedirection and so on.
Once the test KWin is running it's possible to connect to it using
KWayland::Client library. This allows to introspect the Workspace
to see whether all worked as expected (e.g. correct stacking order,
active window and so on).
This first autotest is mostly meant to illustrate how to setup a
test and how one can use KWayland::Client to interact with the mock
KWin. For more tests it is suggested to move the connections to the
Wayland server in the init() and cleanup() methods.
The change also affects the qpa plugin: the specific check to only
run in binaries called kwin_wayland doesn't hold any more. This can
now be overwritten by an env variable.
Please note that this first test will probably fail in the CI system
as it might not have XWayland which is needed by KWin.
We no longer need to have the event dispatcher created before starting
the QApplication, thus we can leave it to the QPA plugin to creat it.
Also we don't need to implement our own dispatcher any more but can
use one from Qt5PlatformSupport as we link it anyways. The special
need for dispatching the WaylandServer is no longer needed as we can
explicitly dispatch it from the QPA plugin if needed.
This introduces an own QPA plugin for KWin. QtWayland's plugin is not
a good solution for KWin as QtWayland is meant for Wayland clients and
not for a Wayland server. Given that it makes more sense to have a very
minimal QPA plugin which supports the use cases we actually have.
With our own QPA plugin we should be able to improve the following
areas:
* no need to create Wayland server before QApplication
* Qt::BypassWindowManagerHint can be supported
* no workaround for creating OpenGL context in main thread
* sharing OpenGL context with Qt
* OpenGL context for Qt on libhybris backend
The plugin supports so far the following features:
* creating a QPlatformWindow using KWayland::Client (ShellSurface)
* creating a QPlatformBackingStore using a ShmPool
* creating a QPlatformOpenGLContext with Wayland::EGL
* or creating a QPlatformOpenGLContext which shares with KWin's scene
* creating a QPlatformScreen for each KWayland::Client::Output
* QPlatformNativeInterface compatible to QtWayland
Overwrite the platform name through the environment variable and ensure
that the plugin is not picked in non-kwin Wayland sessions as that puts
kglobalaccel5 into a crash restart loop.
BUG: 349911
The KGlobalAccelD which gets created by KWin needs a plugin for the
platform specific parts. This change introduces such a plugin. It's
linked against kwin so that it can integrate with the core.
On enable the plugin registers itself in the InputRedirection and
GlobalShortcutsManager checks the plugin whether a shortcut got
triggered.
As the loading of the plugin must happen after InputRedirection is
fully created a dedicated init method is added to InputRedirection.
REVIEW: 124187
