Summary:
The Dim Inactive effect expects that the windowClosed signal always
proceeds the windowDeleted signal. But in some cases that's not the case.
If a window gets destroyed before becoming ready for painting, only
the windowDeleted signal will be emitted. In addition to that, KWin will
activate that window, which means we'll probably start a transition for
it.
Because this effect cannot terminate active transitions for such
windows, KWin can crash in postPaintScreen.
This change addresses the crash in postPaintScreen by adding extra clean
up stuff in the windowDeleted slot to make sure that there are no
transitions for deleted windows.
The proper fix would be to not emit windowActivated signal for windows
that are not ready for painting.
BUG: 399612
FIXED-IN: 5.14.1
Test Plan:
Ran
```
x <- seq(5, 15, length=1000)
y <- dnorm(x, mean=10, sd=3)
plot(x, y, type="l", lwd=1)
```
in RKWard multiple times.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16130
Summary:
The Dim Inactive effect sees the world a little bit differently.
m_activeWindow is currently active window that can be dimmed later on.
In most cases, it's the same as effects->activeWindow(). In rare cases,
it can be nullptr, even when effects->activeWindow() is not equal to nullptr
(e.g. when active window is a context menu popup).
canDimWindow is a helper that returns true if a given window should be
dimmed, otherwise it returns false. It has one special case: if a given
window is equal to m_activeWindow, return false. I.e. don't dim active
windows.
Currently, if user changes config of this effect, active window becomes
dimmed.
The reason for that is we hit that special case when deciding whether
effects->activeWindow() should be m_activeWindow.
This change addresses that problem by resetting m_activeWindow so we
don't hit that special case.
Test Plan:
* Opened KCM of this effect;
* Changed strength;
* (the KCM window stayed bright after I clicked "Apply" button).
(everything else works as expected)
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14973
Summary:
The Dim Inactive effect was rewritten mostly to fix most of issues with
it, e.g. after leaving a full screen effect(e.g. Desktop Grid) windows
sometimes are not dimmed back, or when a window becomes inactive there
is no smooth transition, etc.
{F5956124}
//Before: the window is not smoothly dimmed.//
{F5956127}
//After: the window is smoothly dimmed.//
In combination with an effect that animates the disappearing of windows,
e.g. Glide, the rewritten Dim Inactive effect doesn't "flash" windows.
If an active window has been closed, it will stay bright. If an inactive
window has been closed, it will stay dimmed.
Among other changes, the KCM has been re-designed to follow common KCM
design in Plasma:
{F5956128, layout=center, size=full}
The way the rewritten Dim Inactive effect handles flashing/flickering problem can be
reused in the Dialog Parent effect.
### Demo
{F5959885}
//Before: dimming of a window group.//
{F5959886}
//After: Dimming of a window group.//
Depends on D13740
CCBUG: 359251
Test Plan:
Test plan #1
* Activated the Desktop Grid effect
* Dimmed windows smoothly brightened
* Left desktop grid
* Windows dimmed back
Test plan #2
* Opened Dolphin and its Preferences window
* Clicked on desktop, both Dolphin and the Preferences window dimmed
* Clicked on Dolphin, both windows smoothly brightened back
Reviewers: #kwin, #plasma, #vdg, davidedmundson
Reviewed By: #kwin, #plasma, #vdg, davidedmundson
Subscribers: davidedmundson, abetts, ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13720
Summary:
By changing all kcfg to have arg="true" we can pass in the same
KSharedConfigPtr into all effects. This allows to have fake config in
the tests and in the planned effect demo mode.
Also it means that we don't have to hardcode the name kwinrc into the
files. In the configs - where we cannot access the effectshandler - we
use the define KWIN_CONFIG which gets generated based on the compile
time arguments.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3571
Most is just switched to the ::read(). That should be enough for all the
Effects which have a KSharedConfig::Ptr underneath. If not we just need
to find a good place to put the reload.
As all effects have always been compiled into the same .so file it's
questionable whether resolving the effects through a library is useful
at all. By linking against the built-in effects we gain the following
advantages:
* don't have to load/unload the KLibrary
* don't have to resolve the create, supported and enabled functions
* no version check required
* no dependency resolving (effects don't use it)
* remove the KWIN_EFFECT macros from the effects
All the effects are now registered in an effects_builtins file which
maps the name to a factory method and supported or enabled by default
methods.
During loading the effects we first check whether there is a built-in
effect by the given name and make a shortcut to create it through that.
If that's not possible the normal plugin loading is used.
Completely unscientific testing [1] showed an improvement of almost 10
msec during loading all the effects I use.
[1] QElapsedTimer around the loading code, start kwin five times, take
average.
REVIEW: 115073
The public member variables for opacity, saturation and brightness
are removed in favor for getter and setters. The variables are
moved into a private class. Those are now qreal instead of double.
To make usage inside the effects easier a multiply method is added
which multiplies the current value with passed in factor and returns
the new value in a functional programming style.
This commit is the top-most of a patch series to refactor
ScreenPaintData and WindowPaintData. Other related commits are:
* 0811772
* ebdc7ec
* 2c8dd8d
* 7699726
* 68e0201
* 611cb09
REVIEW: 105141
BUG: 303314
FIXED-IN: 4.10
The KWin::TimeLine class was only a small wrapper around QTimeLine
without adding anything to QTimeLine what is not present in QTimeLine.
The initial idea was to make it possible to provide more curve shapes.
This is now obsoleted by Qt shipping more useful curves with QTimeLine.
So let's clean up a little bit and use QTimeLine directly instead of
the small wrapper.
All effects are adjusted to use QTimeLine directly.
EffectsHandlerImpl connects to the Workspace signal clientActivated.
The emitting of the signal is slightly moved from before the activation logic
to after the activation logic. This might change behavior in the scripting
component, but the previous code looked wrong.
its own directory, cleaned up the effect config macros and renamed
"MakeTransparent" to "Translucency" so that it matches its visible name.
svn path=/trunk/KDE/kdebase/workspace/; revision=921749
