`Placements::placeSmart` searches for an optimal position for windows, attempting to minimize overlap. The core of this algorithm tracks the
client's height and width in `ch` and `cw`, which have been adjusted by -1. This simplifies logic determining the bottom and right points of a
window when you are starting at the top and left points.
However, this decision requires adjusting that number by +1 when doing the opposite: determining the top and left points when you start with
the bottom and right points.
placeSmart cycles through window locations, searching for acceptable nooks and crannies to fit a window in, nicely. It begins by checking
for places to put the top left corner of the window which abut another constraint. If that fails, it then tries to place the bottom right
abutting a constraining feature.
After finding a suitable bottom (or right) location, the top (or left) location must be determined, requiring the -1 adjustment to be undone.
This patch adds that +1 back in.
# The bug it solves
This error can be seen by opening a bunch of windows that are placed using the "Minimal Overlapping" rule. The open space on the screen will be tiled from left to right, and then top to bottom in the windows. Once no more windows can be placed like that, the next window will be placed at the extreme bottom-right corner. However, it will be one pixel too low and one pixel too far to the right---if you try to move the window, it will "snap" to the correct spot.
This single pixel may seem minor or even irrelevant, but when you use the "Present Windows" desktop effect on a multiple-monitor setup, this one pixel will cause the window to show up on both monitors.
Before Deleted merge, it used to be equivalent to waiting until the
window is closed.
This fixes tests waiting until the window closing animation completes
and the Window object is destroyed.
Use input device specific apis to change the position of the cursor. The
main reason to do so is to break the assumption that Cursor position is
the same as pointer position, which I would like to rely on later to
merge tablet and pointer cursors.
We use the PMF syntax so the isValid() check is unnecessary as the
compiler will notify about wrong signal at compile time. It makes
writing autotests feel less boilerplaty.
Things such as Output, InputDevice and so on are made to be
multi-purpose. In order to make this separation more clear, this change
moves that code in the core directory. Some things still link to the
abstraction level above (kwin), they can be tackled in future refactors.
Ideally code in core/ should depend either on other code in core/ or
system libs.
Other policy enums are declared in options.h so let's do the same for
placement policy. Besides consistency, another advantage of moving the
enum in kwin namespace is that the enum could be forward declared.
This change adjusts the window management abstractions in kwin for the
drm backend providing more than just "desktop" outputs.
Besides that, it has other potential benefits - for example, the
Workspace could start managing allocation of the placeholder output by
itself, thus leading to some simplifications in the drm backend. Another
is that it lets us move wayland code from the drm backend.
With fractional scaling integer based logical geometry may not match
device pixels. Once we have a floating point base we can fix that. This
also is
important for our X11 scale override, with a scale of 2 we could
get logical sizes with halves.
We already have all input being floating point, this doubles down on it
for all remaining geometry.
- Outputs remain integer to ensure that any screen on the right remains
aligned.
- Placement also remains integer based for now.
- Repainting is untouched as we always expand outwards
(QRectF::toAdjustedRect().
- Decoration is untouched for now
- Rules are integer in the config, but floating in the adjusting/API
This should also be fine.
At some point we'll add a method to snap to the device pixel
grid. Effectively `round(value * dpr) / dpr` though right now things
mostly work.
This also gets rid of a lot of hacks for QRect right and bottom which
are very
confusing.
Parts to watch out in the port are:
QRectF::contains now includes edges
QRectF::right and bottom are now sane so previous hacks have to be
removed
QRectF(QPoint, QPoint) behaves differently for the same reason
QRectF::center too
In test results some adjusted values which are the result of
QRect.center because using QRectF's center should behave the same to the
user.
AbstractOutput is not so Abstract and it's common to avoid the word
"Abstract" in class names as it doesn't contribute any new information.
It also significantly reduces the line width in some places.
The .clang-format file is based on the one in ECM except the following
style options:
- AlwaysBreakBeforeMultilineStrings
- BinPackArguments
- BinPackParameters
- ColumnLimit
- BreakBeforeBraces
- KeepEmptyLinesAtTheStartOfBlocks
It's more common to see the parent object being the last argument in Qt
and this way you won't need to specify nullptr parent explicitly if the
xdg-popup or the xdg-toplevel surface doesn't need to be configured
implicitly, which makes tests slightly easier to read.
With a "Surface" type in kwin, KWayland::Client::Surface without fully
specified namespace will conflict with kwin's Surface type.
In some way, it also improves readability as it's clear where Surface
comes from.
Active output is a window management concept. It indicates what output
new windows have to be placed on if they have no output hint. So
Workspace seems to be a better place for it than the Screens class, which
is obsolete.
When debugging modifier_only_shortcut_test in _waylandonly mode I saw
that it was failing, among other things, because some aspects were not
initialised.
This changes every test we have to run the new
Test::initWaylandWorkspace() that calls waylandServer()->initWorkspace()
but also makes sure that WaylandServer::initialized is emitted before we
proceed.
The main advantage of SPDX license identifiers over the traditional
license headers is that it's more difficult to overlook inappropriate
licenses for kwin, for example GPL 3. We also don't have to copy a
lot of boilerplate text.
In order to create this change, I ran licensedigger -r -c from the
toplevel source directory.
The new signal is emitted when the Application has fully been initialized.
It allows us to change the startup sequence, for example create workspace
before starting the Xwayland server, without making any adjustments in our
test suit.
Summary:
As is KWin only had 1 Cursor which was a singleton. This made it impossible for
us to properly implement the tablet (as in drawing tablets) support and show where
we're drawing.
This patch makes it possible to have different Cursors in KWin, it makes all the
current code still follow the mouse but the tablet can still render a cursor.
Test Plan: Tests pass, been using it and works as well as before but with beautiful tablet cursors.
Reviewers: #kwin, cblack, davidedmundson
Reviewed By: #kwin, cblack, davidedmundson
Subscribers: davidedmundson, cblack, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D28155
Summary:
Currently, we have only one shell client type - XdgShellClient. We use
it when we are dealing with Wayland clients. But it isn't really a good
idea because we may need to support shell surfaces other than xdg-shell
ones, for example input panel surfaces.
In order to make kwin more extensible, this change replaces all usages
of the XdgShellClient class with the AbstractClient class.
Test Plan: Existing tests pass.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D27778
Summary:
on X11, setFullScreen is always called after Placement::place()
so they always have the correct geometry.
on wayland, the window if is shown directly as fullscren,
is set fullscreen in init() then place() is evecuted, potentially
moving it to a wrong position and potentially even size (which happens
with maximiziong placement strategy)
so instead of place() the client needs to be explicitly set at
fullscreen geometry
Test Plan:
fullscreen windows always appear with the proper geometry
autotests still pass
Reviewers: #kwin, #plasma, davidedmundson
Reviewed By: #kwin, #plasma, davidedmundson
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24542
Summary:
In order to properly implement xdg_surface.set_window_geometry we need
two kinds of geometry - frame and buffer. The frame geometry specifies
visible bounds of the client on the screen, excluding client-side drop
shadows. The buffer geometry specifies rectangle on the screen that the
attached buffer or x11 pixmap occupies on the screen.
This change renames the geometry property to frameGeometry in order to
reflect the new meaning assigned to it as well to make it easier to
differentiate between frame geometry and buffer geometry in the future.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24334
Summary:
Rename ShellClient to XdgShellClient in order to reflect that it
represents only xdg-shell clients.
Test Plan: Compiles, tests still pass.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23589
Summary:
This change removes all traces of wl-shell in the test suite. That's a
prerequisite for dropping wl-shell support in KWin.
Given that wl-shell and xdg-shell are not interchangeable, some tests
were removed and initialization sequence in some tests was adjusted.
The most notable change is ensuring that each plasmashell window sets
its role and initial position before committing the surface. Setting
those properties before the first surface commit is important because
our window placement code needs to know window type in order to
avoid maximizing panels, popups, etc.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23561
