Effects are given the interval between two consecutive frames. The main
flaw of this approach is that if the Compositor transitions from the idle
state to "active" state, i.e. when there is something to repaint,
effects may see a very large interval between the last painted frame and
the current. In order to address this issue, the Scene invalidates the
timer that is used to measure time between consecutive frames before the
Compositor is about to become idle.
While this works perfectly fine with Xinerama-style rendering, with per
screen rendering, determining whether the compositor is about to idle is
rather a tedious task mostly because a single output can't be used for
the test.
Furthermore, since the Compositor schedules pointless repaints just to
ensure that it's idle, it might take several attempts to figure out
whether the scene timer must be invalidated if you use (true) per screen
rendering.
Ideally, all effects should use a timeline helper that is aware of the
underlying render loop and its timings. However, this option is off the
table because it will involve a lot of work to implement it.
Alternative and much simpler option is to pass the expected presentation
time to effects rather than time between consecutive frames. This means
that effects are responsible for determining how much animation timelines
have to be advanced. Typically, an effect would have to store the
presentation timestamp provided in either prePaint{Screen,Window} and
use it in the subsequent prePaint{Screen,Window} call to estimate the
amount of time passed between the next and the last frames.
Unfortunately, this is an API incompatible change. However, it shouldn't
take a lot of work to port third-party binary effects, which don't use the
AnimationEffect class, to the new API. On the bright side, we no longer
need to be concerned about the Compositor getting idle.
We do still try to determine whether the Compositor is about to idle,
primarily, because the OpenGL render backend swaps buffers on present,
but that will change with the ongoing compositing timing rework.
A window id generated by WaylandServer may reference an X11 window
with the same id, which can result in undefined behavior.
The main reason why we needed windowId() was because of the task
switcher. However, since tabbox uses internal ids now, the window id
property can be dropped.
This change replaces the remaining usages of the old connect syntax with
the new connect syntax.
Unfortunately, there are still places where we have to use SIGNAL() and
SLOT() macros, for example the stuff that deals with d-bus business.
Clazy was used to create this change. There were a few cases that needed
manual intervention, the majority of those cases were about resolving
ambiguity caused by overloaded signals.
Instead of looping through the rects in the region, emit the region at
bulk. It reduces the amount of emissions we do and allows us to pack the
response accordingly.
The main advantage of SPDX license identifiers over the traditional
license headers is that it's more difficult to overlook inappropriate
licenses for kwin, for example GPL 3. We also don't have to copy a
lot of boilerplate text.
In order to create this change, I ran licensedigger -r -c from the
toplevel source directory.
We were calling it from tests that were not running a KWin::Application
and not even including the symbols from main.cpp and main.h. The only
reason they linked was that it was static_casting up the QCoreApplication.
There are several ways to handle unmapping of a wl_surface. The first
one is to destroy the associated AbstractClient instance. The second one
is to transition the AbstractClient in a special state.
The problem with the second approach is that it makes animations such as
fade out more difficult to handle since effects in kwin are geared more
towards the first approach (destroying AbstractClient).
Summary:
This change splits the XdgShellClient class to better match existing
abstractions in the xdg-shell protocol and fix a few issues related to
sending configure events.
In the new client classes, configure events are handled differently.
Instead of blocking configure events, we try to send them as late as
possible. Delaying configure events will let us merge changeMaximize()
for X11 clients and Wayland clients and it also fixes the bug where
we don't send the final configure event when user has finished resizing
a window.
Given that configure events are not sent immediately, XdgSurfaceClient
keeps the last requested frame geometry and the last requested client
geometry.
This patch doesn't intend to fix all issues in kwin's implementation of
the xdg-shell protocol. For example, we still handle surface unmapping
very poorly.
Test Plan: Tests pass.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D27861
Summary:
Currently, if one wants to monitor for new X11 and Wayland clients, they
have to listen for two signals. Workspace::clientAdded() is emitted only
for X11 and Xwayland clients, while WaylandServer::shellClientAdded() is
emitted only for xdg-shell clients. Such design doesn't scale well.
As the first towards emitting Workspace::clientAdded() for new Wayland
clients, this change replaces the X11Client parameter in the clientAdded
signal with AbstractClient.
Test Plan: Tests still pass.
Reviewers: #kwin, cblack
Reviewed By: cblack
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D29665
Summary:
As is KWin only had 1 Cursor which was a singleton. This made it impossible for
us to properly implement the tablet (as in drawing tablets) support and show where
we're drawing.
This patch makes it possible to have different Cursors in KWin, it makes all the
current code still follow the mouse but the tablet can still render a cursor.
Test Plan: Tests pass, been using it and works as well as before but with beautiful tablet cursors.
Reviewers: #kwin, cblack, davidedmundson
Reviewed By: #kwin, cblack, davidedmundson
Subscribers: davidedmundson, cblack, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D28155
Summary:
Currently, we have only one shell client type - XdgShellClient. We use
it when we are dealing with Wayland clients. But it isn't really a good
idea because we may need to support shell surfaces other than xdg-shell
ones, for example input panel surfaces.
In order to make kwin more extensible, this change replaces all usages
of the XdgShellClient class with the AbstractClient class.
Test Plan: Existing tests pass.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D27778
Summary:
Currently EffectWindowImpl::shape() falls back to the frame geometry
because isX11Client() returns invalid value for Unmanaged clients.
BUG: 415475
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D26542
This reverts commit 9151bb7b9e.
This reverts commit ac4dce1c20.
This reverts commit 754b72d155.
In order to make the fix work, we need to redirect the client window
instead of the frame window. However, we cannot to do that because
Xwayland expects the toplevel window(in our case, the frame window)
to be redirected.
Another solution to the texture bleeding issue must be found.
CCBUG: 257566
CCBUG: 360549
Summary:
Since KDE 4.2 - 4.3 times, KWin doesn't paint window decorations on real
X11 windows, except when compositing is turned off. This leaves us with
a problem. The actual client contents is inside a larger texture with no
useful pixel data around it. This and decoration texture bleeding are
the main factors that contribute to 1px gap between the server-side
decoration and client contents with effects such as wobbly windows, and
zoom.
Another problem with naming frame pixmap instead of client pixmap is
that it doesn't quite go along with wayland. It only makes more difficult
to abstract window quad generation in the scene.
Since we don't actually need the frame window when compositing is on,
there is nothing that holds us from redirecting client windows instead
of frame windows. This will help us to fix the texture bleeding issue
and also help us with the ongoing redesign of the scene.
Test Plan: X11 clients are still composited.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D25610
Summary:
Qt has its own thing where a type might also have corresponding list
alias, e.g. QObject and QObjectList, QWidget and QWidgetList. I don't
know why Qt does that, maybe for some historical reasons, but what
matters is that we copy this pattern here in KWin. While this pattern
might be useful with some long list types, for example
QList<QWeakPointer<TabBoxClient>> TabBoxClientList
in general, it causes more harm than good. For example, we've got two
new client types, do we need corresponding list typedefs for them? If
no, why do we have ClientList and so on?
Another problem with these typedefs is that you need to include utils.h
header in order to use them. A better way to handle such things is to
just forward declare a client class (if that's possible) and use it
directly with QList or QVector. This way translation units don't get
"bloated" with utils.h stuff for no apparent reason.
So, in order to make code more consistent and easier to follow, this
change drops some of our custom typedefs. Namely ConstClientList,
ClientList, DeletedList, UnmanagedList, ToplevelList, and GroupList.
Test Plan: Compiles.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24950
Summary:
Currently our Scene is quite naive about geometry. It assumes that the
window frame wraps the attached buffer/client. While this is true for X11
clients, such geometry model is not suitable for client-side decorated
clients, in our case for xdg-shell clients that set window geometry
other than the bounding rectangle of the main surface.
In general, the proposed solution doesn't make any concrete assumptions
about the order between frame and buffer geometry, however we may still
need to reconsider the design of Scene once it starts to generate quads
for sub-surfaces.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, romangg, kwin
Tags: #kwin
Maniphest Tasks: T10867
Differential Revision: https://phabricator.kde.org/D24462
Summary:
When a plasma session quits, the order of plasmashell and clients quitting is undetermined.
This looks bad as our desktop background disappears quite early. Rather than changing the real order, we can have kwin reference the last pixmap of any desktop and hold on to it.
Lasting till the compositor quits means it stays on the X frontbuffer till X quits and the experience is seamless.
Test Plan: Logged out (with relevant other ksmserver patches)
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24864
Summary:
Won't make things go much faster since everything that was
being passed by value is refcounted but still const & is a bit faster
than refcounting
For shared pointers instead of adding const & we move them into the
destination variable saving some cpu usage but at the same time making
clear the pointer is being stored by not being const &
Reviewers: zzag
Reviewed By: zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D25022
Summary:
In order to properly implement xdg_surface.set_window_geometry we need
two kinds of geometry - frame and buffer. The frame geometry specifies
visible bounds of the client on the screen, excluding client-side drop
shadows. The buffer geometry specifies rectangle on the screen that the
attached buffer or x11 pixmap occupies on the screen.
This change renames the geometry property to frameGeometry in order to
reflect the new meaning assigned to it as well to make it easier to
differentiate between frame geometry and buffer geometry in the future.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24334
Summary:
EffectQuickView/Scene is a convenient class to render a QtQuick
scenegraph into an effect.
Current methods (such as present windows) involve creating an underlying
platform window which is expensive, causes a headache to filter out
again in the rest of the code, and only works as an overlay.
The new class exposes things more natively to an effect where we don't
mess with real windows, we can perform the painting anywhere in the view
and we don't have issues with hiding/closing.
QtQuick has both software and hardware accelerated modes, and kwin also
has 3 render backends. Every combination is supported.
* When used in OpenGL mode for both, we render into an FBO export the
texture ID then it's up to the effect to render that into a scene.
* When using software QtQuick rendering we blit into an image, upload
that into a KWinGLTexture which serves as an abstraction layer and
render that into the scene.
* When using GL for QtQuick and XRender/QPainter in kwin everything is
rendered into the internal FBO, blit and exported as an image.
* When using software rendering for both an image gets passed directly.
Mouse and keyboard events can be forwarded, only if the effect
intercepts them.
The class is meant to be generic enough that we can remove all the
QtQuick code from Aurorae.
The intention is also to replace EffectFrameImpl using this backend and
we can kill all of the EffectFrame code throughout the scenes.
The close button in present windows will also be ported to this,
simplifiying that code base.
Classes that handle the rendering and handling QML are intentionally
split so that in the future we can have a declarative effects API create
overlays from within the same context. Similar to how one can
instantiate windows from a typical QML scene.
Notes:
I don't like how I pass the kwin GL context from the backends into the
effect, but I need something that works with the library separation. It
also currently has wayland problem if I create a QOpenGLContext before
the QPA is set up with a scene - but I don't have anything better?
I know for the EffectFrame we need an API to push things through the
effects stack to handle blur/invert etc. Will deal with that when we
port the EffectFrame.
Test Plan: Used in an effect
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24215
Summary:
Currently each managed X11 client is represented with an instance of
Client class, however the name of that class is very generic and the
only reason why it's called that way is because historically kwin
was created as an x11 window manager, so "Client" was a sensible choice.
With introduction of wayland support, things had changed and therefore
Client needs to be renamed to X11Client in order to better reflect what
that class stands for.
Renaming of Client to X11Client was agreed upon during the last KWin
sprint.
Test Plan: Compiles, the test suite is still green.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: romangg, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24184
Summary:
Rename ShellClient to XdgShellClient in order to reflect that it
represents only xdg-shell clients.
Test Plan: Compiles, tests still pass.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23589
Summary:
So far wayland was used by internal clients to submit raster buffers
and position themselves on the screen. While we didn't have issues with
submitting raster buffers, there were some problems with positioning
task switchers. Mostly, because we had effectively two paths that may
alter geometry.
A better approach to deal with internal clients is to let our QPA use
kwin core api directly. This way we can eliminate unnecessary roundtrips
as well make geometry handling much easier and comprehensible.
The last missing piece is shadows. Both Plasma::Dialog and Breeze widget
style use platform-specific APIs to set and unset shadows. We need to
add shadows API to KWindowSystem. Even though some internal clients lack
drop-shadows at the moment, I don't consider it to be a blocker. We can
add shadows back later on.
CCBUG: 386304
Reviewers: #kwin, davidedmundson, romangg
Reviewed By: #kwin, romangg
Subscribers: romangg, kwin
Tags: #kwin
Maniphest Tasks: T9600
Differential Revision: https://phabricator.kde.org/D22810
Summary:
Because KWin is a very old project, we use three kinds of null pointer
literals: 0, NULL, and nullptr. Since C++11, it's recommended to use
nullptr keyword.
This change converts all usages of 0 and NULL literal to nullptr. Even
though it breaks git history, we need to do it in order to have consistent
code as well to ease code reviews (it's very tempting for some people to
add unrelated changes to their patches, e.g. converting NULL to nullptr).
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson, romangg
Reviewed By: #kwin, davidedmundson, romangg
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23618
Summary:
This has been commented out since 2014, I doubt it will come back.
This is a big amount of code, maintenance will be easier without it.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: romangg, graesslin, kwin
Tags: #kwin, #documentation
Differential Revision: https://phabricator.kde.org/D23069
Summary:
Switch to Q_ASSERT in order to make code a bit more consistent. We have
places where both assert and Q_ASSERT are used next to each other. Also,
distributions like Ubuntu don't strip away assert(), let's hope that
things are a bit different with Q_ASSERT.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: romangg, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23605
Summary:
There is no point in using quint32 and casting back and forth in numerous places.
Fix a bunch of compiler warnings that we implicitly cast between signed and unsigned.
This makes things consistent with what we get from libinput.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: zzag, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23086
Summary:
This usage of QWeakPointer has been deprecated since Qt 5.0, since it
leads to really confusing API - usually you must never dereference a
QWeakPointer directly, but always go through QSharedPointer, except in
this one case, where it's permissible.
The thumbnails are only referenced in one place, this change is straight-forward.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23070
Summary:
Use #else, otherwise there are two return statements after each other
which doesn't make sense.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23068
Summary:
The screenlock fails on X11 if it can't grab the keyboard.
We can't nicely solve the generic case. We can solve the common case of
a kwin effect being active.
It's not critical, arguably not even desirable to have these effects
persist after the screen is locked through an external trigger. We can
just close the effect early.
Key grabs have to be relased early before the close animation completes
so that the locker doesn't have a race based on animation times.
It's not ideal, but no worse than the current state for not much work.
BUG: 234153
Test Plan:
locked screen on a timer
opened various effects
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: ngraham, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D20890
Summary:
Window open/close animation effects should not animate the outline
because the end result is a bit awkward.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19886
Summary:
So far the ThumbnailItem in TabBox mode used the window id for finding
the window it should render a thumbnail on. In the Wayland world this is
not unique. The window id could be either an X11 window or a wayland
window. We don't guarantee that there are no conflicting ids.
With the internal id we have a way to properly identify the windows, so
this element should use them.
To support this the property changed the type to QUuid and the
clientmodel also provides the QUuid. As in TabBox the way to get the
window is through the model this should be compatible for all themes.
It's tested and verified with the Breeze switcher.
For declarative KWin scripts the ThumbnailItem also provides the
AbstractClient as a property, so there should not be any script which
uses wid. If it does, this could break, but well the script should use
the intended API.
Test Plan: ctest passes, manual testing of Breeze alt-tab switcher
Reviewers: #kwin
Differential Revision: https://phabricator.kde.org/D18405
Summary:
KWindowSystem provides a plugin interface to have platform specific
implementations. So far KWin relied on the implementation in
KWayland-integration repository.
This is something I find unsuited, for the following reasons:
* any test in KWin for functionality set through the plugin would fail
* it's not clear what's going on where
* in worst case some code could deadlock
* KWin shouldn't use KWindowSystem and only a small subset is allowed
to be used
The last point needs some further explanation. KWin internally does not
and cannot use KWindowSystem. KWindowSystem (especially KWindowInfo) is
exposing information which KWin sets. It's more than weird if KWin asks
KWindowSystem for the state of a window it set itself. On X11 it's just
slow, on Wayland it can result in roundtrips to KWin itself which is
dangerous.
But due to using Plasma components we have a few areas where we use
KWindowSystem. E.g. a Plasma::Dialog sets a window type, the slide in
direction, blur and background contrast. This we want to support and
need to support. Other API elements we do not want, like for examples
the available windows. KWin internal windows either have direct access
to KWin or a scripting interface exposed providing (limited) access -
there is just no need to have this in KWindowSystem.
To make it more clear what KWin supports as API of KWindowSystem for
internal windows this change implements a stripped down version of the
kwayland-integration plugin. The main difference is that it does not use
KWayland at all, but a QWindow internal side channel.
To support this EffectWindow provides an accessor for internalWindow and
the three already mentioned effects are adjusted to read from the
internal QWindow and it's dynamic properties.
This change is a first step for a further refactoring. I plan to split
the internal window out of ShellClient into a dedicated class. I think
there are nowadays too many special cases. If it moves out there is the
question whether we really want to use Wayland for the internal windows
or whether this is just historic ballast (after all we used to use
qwayland for that in the beginning).
As the change could introduce regressions I'm targetting 5.16.
Test Plan:
new test case for window type, manual testing using Alt+Tab
for the effects integration. Sliding popups, blur and contrast worked fine.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18228
Summary:
7834bec52a missed to port minimize and
unminimize to dynamic dispatch. In addition to that, we don't benefit
from QMetaObject::invokeMethod so port addRepaint and addLayerRepaint
to dynamic dispatch as well.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18049