Summary:
Several effects announce a support property atom on the root window. This
change forwards the KWin::Application's signal that the xcbConnection
changed to the EffectsHandler so that the effects can respond to it.
All effects which announce a support property connect to this new signal
and re-announce the property. In case the xcb connection died (future
XWayland crashing case) it is set to XCB_ATOM_NONE by that. In case the
xcb connection got created (future delayed XWayland startup) the atom is
set to the proper value.
In addition all usages of the support properties are guarded, so that no
nonesense actions are performed if the support property is XCB_ATOM_NONE.
Test Plan: Only compile tested as we don't have XFree KWin yet
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7761
Summary:
By changing all kcfg to have arg="true" we can pass in the same
KSharedConfigPtr into all effects. This allows to have fake config in
the tests and in the planned effect demo mode.
Also it means that we don't have to hardcode the name kwinrc into the
files. In the configs - where we cannot access the effectshandler - we
use the define KWIN_CONFIG which gets generated based on the compile
time arguments.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3571
Summary:
The effect unset the WindowClosedGrabRole unconditionally if it does not
manage the window. This results in any grab set by other effects to break.
BUG: 376609
FIXED-IN: 5.9.5
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5225
Summary:
When windows get added some effects grab the window and want to be the
only one animating this window. For this the grab roles exists. An
effect being notified later on evaluates the grab state and does not
start the animation.
This process failed due to being dependent on the order the effects are
loaded. Window Added/Closed are signals emitted by EffectsHandler, thus
first come, first serve. The requested effect order does not play into
it.
Due to that it could happen that an Effect which should not animate,
started to animate as the grab was still there.
This change adds the possibility to be notified whenever the window data
changes. A new signal is added to EffectsHandler which is emitted
whenever the windowData changes. The interested effects connect to it
and cancel their (just started) animation for the window.
Adjusted effects are:
* ScaleIn
* Fade
* WobblyWindows
In case of WobblyWindows an additional logical error was fixed that the
animations were only run when an effect grabbed instead of the other way
around.
BUG: 336866
FIXED-IN: 5.8.4
Reviewers: #kwin, #plasma, broulik
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3211
Summary:
With this change SlidingPopups is able to animate Wayland clients
properly, though windowHidden does not yet work for OpenGL based
windows (buffer seems to get lost somewhere).
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2085
In addition it's required to keep the expandedGeometry alive until
the effects handled the deletion
BUG: 318322
BUG: 320892
BUG: 344359
REVIEW: 126323
FIXED-IN: 5.6
All KCMs and KWin core use the BuiltInEffects namespace to find and
interact with the effects. There is no information left in the desktop
file which are of usage. Thus they can be removed.
If the property changes the animation data is updated. As the last
property change event will definately be delivered before an unmap notify
we can be sure that the animation data is up to data. Reading the
property again does not have any advantages.
By removing it we get rid of at least one roundtrip to the X Server and
it fixes one failed GetProperty error when it tries to read the property
for an already destroyed unmanaged.
REVIEW: 117431
This method replaces the X-KDE-ORDERING property in the Effect's desktop
files. This change is a preparation step for integrating the new Effect
Loader which doesn't read the ordering information. Thus it needs to be
provided by the Effect itself so that the EffectsHandler can properly
insert it into the chain.
Also for the built-in Effects on the long run it doesn't make much sense
to install the desktop files. And binary plugin effects will migrate to
json metadata which also doesn't have the KService::Ptr. Thus overall it
simplifies to read this information directly from the Effect.
This seems like a more proper fix for the flickering issue in the
sliding popups effect. The problem is that slidingpopups grabs the
window in windowClosed, the fade effect checks it there, which makes
it racy.
In my tests, I've not seen this problem with the WindowAddedGrab, but
as far as I understand, the problem may well be present there as well.
(And my proposed trick doesn't work.) I've not seen this happening in my
debugging, however. The problem there is also less visible since the
transparency curves go into the same direction, and are more "in line
with each other".
So, fix: Move the setData(WindowClosedGrabRole, ...) call from
windowClosed into windowAdded, which makes sure it's set whenever the
window goes away.
REVIEW:115903
BUG:329991
This fixes the sliding popups losing their contrast effect when
animating, less flicker.
In this patch, we temporarily force the contrast effect on, but only if
it hasn't been explicitely disabled. As soon as the animation stops, the
force flag is disabled again. For disappearing windows, we just set the
flag in the same way, but skip over the bookkeeping, since the window is
going to be deleted, anyway.
REVIEW:115902
As all effects have always been compiled into the same .so file it's
questionable whether resolving the effects through a library is useful
at all. By linking against the built-in effects we gain the following
advantages:
* don't have to load/unload the KLibrary
* don't have to resolve the create, supported and enabled functions
* no version check required
* no dependency resolving (effects don't use it)
* remove the KWIN_EFFECT macros from the effects
All the effects are now registered in an effects_builtins file which
maps the name to a factory method and supported or enabled by default
methods.
During loading the effects we first check whether there is a built-in
effect by the given name and make a shortcut to create it through that.
If that's not possible the normal plugin loading is used.
Completely unscientific testing [1] showed an improvement of almost 10
msec during loading all the effects I use.
[1] QElapsedTimer around the loading code, start kwin five times, take
average.
REVIEW: 115073
Videos for the following effects are added:
* Dim Inactive
* Dim Screen for Administration Mode
* Invert
* Looking Glass
* Magnifier
* Mouse Click
* Track Mouse
* Zoom
Link for Present Windows video fixed.
That's what you get for changing code you cannot properly test. The
calculation was completely messed up. Now reads the correct byte size
for the byte array. In addition the usages in the effects are improved
to cast the data into the proper uint32_t values instead of the more
generic long. After all if the format is 32, the length is 32 and not
a long.
* "" needs to be wrapped in QStringLiteral
* QString::fromUtf8 needed for const char* and QByteArray
* QByteArray::constData() needed to get to the const char*
Animation now completely based on the expandedGeometry which includes the
shadows and another repaint at the end of the animation is added to
ensure that there are no leftover shadows.
BUG: 312168
FIXED-IN: 4.10
REVIEW: 108255
Instead of each effect, which needs to announce support, having custom
code to create a property and set it on the root window, there is now a
common API in EffectsHandler to take care of this.
The methods takes care of creating the atom if it has not already done
and set the property on the root window. Furthermore it allows multiple
effects to announce the same property without getting in conflict with
each other.
As a further convenience the property is automatically removed when the
effect is unloaded, so less things an effect author has to care about.
REVIEW: 107815
The supportInformation is extended to also read the properties
on all effects. In addition each effect can be queried just for
itself through D-Bus, e.g.:
qdbus org.kde.kwin /KWin supportInformationForEffect kwin4_effect_blur
All effects are extended to provide their configured and read
settings through properties. In some cases also important
runtime information is exposed.
REVIEW: 105977
BUG: 305338
FIXED-IN: 4.9.1
