So far it was bound to whether we build for GLES. But this is
semantically wrong. It might be possible that even on desktop gl
epoxy is built without GLX support, thus we need to reflect this.
This change ensures that epoxy/glx.h is only included if available,
that relevant code is bound to it and that checks are in place to
enforce EGL if not build with glx support.
In addtion the glxbackend.cpp is now only included in the build set
if available.
On popular demand!
This change tracks how modifiers are used and detects a modifier only
key press/release. That is:
* no other key is pressed when the modifier gets pressed
* no other key gets pressed before the modifier gets released
If such a press/release is detected, we call a configurable dbus call.
The possible shortcuts can be configured in kwinrc, group
"ModifierOnlyShortcuts". The following keys are supported:
* Shift
* Control
* Alt
* Meta
As value it takes a QStringList (comma seperated string) with
service,path,interface,method,additionalargs
E.g. to invoke Desktop Grid effect on Meta key:
[ModifierOnlyShortcuts]
Meta=org.kde.kglobalaccel,/component/kwin/,org.kde.kglobalaccel.Component,invokeShortcut,ShowDesktopGrid
I do not intend to add a config interface for it. Let's keep it a hidden
way.
REVIEW: 124954
It doesn't make much sense any more as we do no longer link EGL since the
switch to epoxy. And epoxy pulls it in at runtime if needed.
Even more on Wayland it's just plain stupid to have EGL disabled. So
removing the option just simplifies our code base without any
disadvantages.
REVIEW: 124695
ScreenInfo::rate is reporting 50Hz (on at least nvidia)
... AGAIN! * sigh*
In addition we check for __GL_SYNC_DISPLAY_DEVICE to pick
the rate of the screen that the driver will actually sync to
(hopefully...)
The patch is limited to nvidia systems for 5.3, applied everywhere
in master (ie. will be in 5.4 unless there's some problem)
BUG: 347360
REVIEW: 123693
Was only used as fallback for older NVIDIA drivers. At the same time
also drop the call to nvidia-settings which was also only used as
a fallback for refresh rate detection.
REVIEW: 122423
A new config option "GLPlatformInterface" is added to the Compositing
settings group. Valid values are "glx" and "egl". This config option is
honored by the Scene to decide which backend to create.
The setting gets sanitized by the operation mode (egl for Wayland),
the environment variable KWIN_OPENGL_INTERFACE and the compile time
support. These switches are removed from the Scene to not have them
duplicated.
Most is just switched to the ::read(). That should be enough for all the
Effects which have a KSharedConfig::Ptr underneath. If not we just need
to find a good place to put the reload.
KWin already has a de facto OpenGL 2 dependency through QML. Combined
with the fact that the OpenGL 1 backend is basically unmaintained and
also unused, it's better to remove it for the new major release.
This change includes:
* Removal of cmake option KWIN_BUILD_OPENGL_1_COMPOSITING
* Removal of KWIN_HAVE_OPENGL_1 compile option and all code
ifdef'ed with it (partially removal of if-else constructs)
* Removal of CompositingType::OpenGL1Compositing (flags are kept
as a core flag should get introduced)
* Driver recommendation for OpenGL1Compositing changed to XRender
(should be evaluated whether the drivers can provide GL2)
* Removal of configuration option "GLLegacy"
* Removal of fooMatrix function in kwinglutils
* Removal of ARBBlurShader
* Removal of legacy code path in GLVertexBuffer
* Removal of GLShaderManager::disable
* if-blocks with ShaderManager::instance()->isValid() removed
REVIEW: 116042
This compositor uses only the QPainter API to perform rendering. The
window's X Pixmap is mapped to a QImage using XShm. As rendering backend
a QImage is used.
The new compositing type "QPainterCompositing" is introduced. Effects
need to be adjusted to explicitly check the compositing type and no
longer assume the compositing type is XRender if it's not OpenGL.
This compositor can be selected with using "Q" as the value for
KWIN_COMPOSE env variable or setting the config value to "QPainter".
The GUI is not yet adjusted to select this compositor.
The QPainter scene provides currently the following features:
* 2D transformations (translation and scalation)
* opacity modifications
* rendering of decorations (new PaintRedirector sub class)
* rendering of shadows
* rendering of effect frames
* rendering to a Wayland surface
The following features are currently not provided:
* saturation changes
* brightness changes
* 3D transformations
* rendering to X Overlay window
* offscreen rendering (e.g. needed for screen shot effect)
* custom rendering in the effects to the current back buffer
The main purpose of the opengl testapp was to set the environment
variable LIBGL_ALWAYS_INDIRECT if direct rendering is not supported
before glx gets initialized.
With Qt5 we may no longer set this environment variable. QtQuick
requires direct rendering. On IvyBridge QtQuick is crashing if the
variable is set. Thus we are no longer allowed to set it and thus the
complete test becomes pointless.
The test app basically whitelisted most drivers anyway, the only
drivers which were problematic are the proprietary Catalyst drivers.
It that's still a problem we can also disable OpenGL compositing on
those drivers through the recommendation in the GLPlatform.
This also means that the KWIN_DIRECT_GL variable is no longer useful.
The configChanged() signal was declared in both KDecorationOptions and
Options, while Options recently became derived from KDecorationOptions.
This created confusion for QMetaObjectPrivate which was spitting a
couple of error messages.
Remove configChanged() signal declaration from Options, rely on the one
from the base class Options.
Create a special notify signal for focusPolicyIsResonableChanged,
directly connected to the configChanged() signal.
REVIEW: 113336
For this KDecorationOptions becomes a QObject. The changed flags from
updateSettings are removed. Instead the method just emits the proper
changed signals.
This should allow better handling in the Factories.
The changed mask is going to be replaced by more specific signals so
we don't need to calculate the change mask in KWin core anymore.
We still need to call reset in the decoration plugin to check whether
a new decoration library needs to be loaded.
Used to include quite a bit no longer needed. In order to get rid of
the utils.h inclusion one enum is moved to options (where it actually
belongs to).
enforce to "e" (cheap) when driver is still unknown after
detection must be assumed to have run, so a sane value is available
when the context is up
BUG: 322355
FIXED-IN: 4.11
REVIEW: 111548
* "" needs to be wrapped in QStringLiteral
* QString::fromUtf8 needed for const char* and QByteArray
* QByteArray::constData() needed to get to the const char*
the only thing it does on these systems is cause users
trouble because usually when there's a client where
unredirection makes sense, that uses OpenGL - and then
things break in the driver.
CCBUG: 252817
REVIEW: 111476
* don't execute OpenGL test app if user selected XRender
* don't execute OpenGL test app if user forces to EGL
If a user selected XRender because OpenGL is failing badly it might not
be the best idea to call an OpenGL application.
If the user enforces EGL it's kind of pointless to call a testapp which
uses GLX.
REVIEW: 110659
This changes the default refresh rate (which KWin uses if it cannot get the rate from the screen) from 50Hz to 60Hz.
There are two reasons for this:
- When plugging out the last active screen, even without calling xrandr the X server changes the screen geometry to some built-in minimum (320x200), with, of course, no information about the refresh rate. As a result, KWin assumes 50Hz and restarts the compositor to accommodate for this change, only to change it again soon thereafter when there's a screen again.
- I know of nobody using a 50Hz screen. Most people use 60Hz, some use 120Hz, but 50Hz seems pretty rare to me.
REVIEW: 110454
Following the approaches of other split out functionality Screens is a
singleton class created by Workspace.
The class takes over the responsibility for:
* screenChanged signal delayed by timer
* number of screens
* geometry of given screen
* active screen
* config option for active screen follows mouse
The class contains a small abstraction layer and has a concrete subclass
wrapping around QDesktopWidget, but the idea is to go more low level and
interact with XRandR directly to get more detailed information.
All over KWin the usage from QDesktopWidget is ported over to the new
Screens class.
REVIEW: 109839
either by
- forcing fullrepaints unconditionally
- turning a repaint to a full one beyond a threshhold
- completing the the backbuffer from the frontbuffer after the paint
BUG: 307965
FIXED-IN: 4.10
REVIEW: 107198
The new class FocusChain manages two different kind of focus chains.
First of all there is a most recently used focus chain which is primarily
used for TabBox.
Then there is one focus chain per virtual desktop. These chains are used
to determine which Client needs to be activated when e.g. switching to a
virtual desktop.
The individual chains are implemented as a simple QList of Client* with
the most recently used Client as the last element. That way one can see
it as a LIFO like structure.
The desktop focus chains are internally represented as a hash with the id
of the virtual desktop as the key and a list as described as the value.
FocusChain is a singleton which provides some methods to manipulate the
chains and to get a specific Client for a task (e.g. TabBox).
While splitting out the code some unused code inside TabBox got removed
as well as some activities related code (windows cannot be moved while
switching activities).
REVIEW: 107494
For the time being the current design of Options is more or less kept to
not have to adjust KWin code all over the place. Also for some parts the
generated class from KConfigXT cannot be used due to inter-settings
dependencies defined in the setters.
Options now holds a pointer to a Settings object which is generated from
KConfigXT and uses it to read the default values and the individual
settings. This means the static default value methods are dropped and the
variables are initialized with a normal default value (all int 0, all
boolean false and so on) in the initializer list. Afterwards the values
are set to the correct default value through KConfigXT.
So far for the first step only Windows category is using KConfigXT.
REVIEW: 108572
This rewrite is mostly motivated by the need to handle multi screen
setups correctly. That is have edges per screen and not for the combined
geometry. Also porting from XLib to XCB has been a motivation for the
rewrite.
The design of the new ScreenEdge handling is described in the
documentation of ScreenEdges in screenedge.h.
In addition the following changes have been performed:
* move configuration from Options to ScreenEdge
* add screen edge information to Workspace::supportInformation (obviously
replaces what had been read from Options)
* have Workspace hold a pointer to ScreenEdges instead of an object
* forward declaration of ScreenEdges in workspaces.h, this explains the
seemingly unrelated changes of just another include in some files
BUG: 290887
FIXED-IN: 4.11
The extension handling is removed from kwinglobals and moved into the
xcbutils in KWin core in namespace KWin::Xcb. The motivation for this
change is that the Extensions are only used in KWin core and are marked
as internal. So there is no need to have them in the library.
What remains in Extensions are the non-native pixmaps. This will be
removed once we are on Qt 5 as QPixmap can no longer reference an XPixmap.
The remaining code in kwinglobals also still initialize the XLib versions
of extensions emitting events. It seems like there are no XEvents emitted
if not done so even if the extension is correctly initialized with xcb.
This needs to be removed once the event handling is ported over to xcb.
REVIEW: 107832
The ownership for virtual desktops is moved from Workspace into a new
VirtualDesktopManager. The manager is responsible for providing the count
of virtual desktops and keeping track of the currently used virtual
desktop.
All methods related to moving between desktops are also moved from
Workspace to the new manager, though all methods related to Clients on
Virtual Desktops remain in Workspace for the time being. This is to have
the new manager as independent from KWin core as possible.
An rather important change for the handling of virtual desktops is that
the count and the id of a desktop is now an unsinged integer instead of
an integer. The reason for that is that we cannot have a negative count
of desktops as well as it is not possible to be on a desktop with a
negative identifier.
In that regard it is important to remember that a Client can be on a
desktop with a negative identifier. The special value for a Client being
on all desktops is handled by using -1 as a desktop. For the time being
this is not adjusted but instead of comparing the virtual desktop ids one
should prefer to use the convenient methods like isOnDesktop and
isOnAllDesktops. This would allow in future to internally change the
representation for on all desktops.
Add an option to kcmcompositing in the 'Advanced' tab, to enable or
disable color correction. It is specified that it's experimental and it
needs Kolor Manager.
Before painting for a particular screen, ColorCorrection::setupForOutput
should be called.
A screen property is added for WindowPaintData.
In kwinglutils, The fragment shaders are intercepted before being
compiled and they get a couple of lines of code inserted in order to do
the color correction. This happens only when color correction is enabled, of
course.
For D-Bus communication with KolorServer, everything is async.
The implementation basically manages a set of color lookup tables for
different outputs and for different window regions. These are taken via
D-Bus. Each lookup table has around 700 KB.
This commit reintroduces the changes from the former merge with the
"color2" branch. In this form, it can be easily reverted.
REVIEW: 106141
This merge is incomplete and it does not include the review number of
the associated review request. It should have been pushed as a single
commit, because the merged commits were not intended to be published in
their form.
This reverts commit dcba90263069a221a5489b1915c5cf1ca39d090c, reversing
changes made to 50ae07525c7fde07794e7548c3d6e5a69cb1a89d.
Conflicts:
kwin/scene_opengl.cpp
kwin/scene_opengl.h
