Summary:
So far for internal cleanup we mostly listen to QObject::destroyed.
When a Resource gets unbind the wl_resource is set to null and the
Resource gets deleteLater. This creates a short time frame when the
Resource is still there, but the wl_resource is null. For most internal
usages the Resource is completely useless at that point and should no
longer be considered. So far it was still considered and could hit
crashers, if a code path did not nullptr check. Unfortunately
libwayland-server is not nullptr safe: if called with a null value it
tends to crash.
So this check introduces a new signal unbound which can be listend to
in addition to the destroyed signal. It's used in SeatInterface for
DataDeviceInterface, where we experienced a crash related to that.
A test case is added which exposes the crash, but it already needs
the unbound signal to get into the crashy condition. The actual crash
is fixed twice - with the help of the unbound signal, but also by
introducing the nullptr check where it's needed.
Reviewers: #plasma_on_wayland
Subscribers: plasma-devel
Tags: #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D1868
Summary:
The fact that the buffer is still referenced - that is used - when the
BufferInterface gets destroyed is an error, but it is not fatal.
Unfortunately KWin/Wayland is still hitting this assert from time to
time and the assert is not helping to find the cause as a backtrace
does not show where a reference is still hold.
This change removes the hard assert by a soft warning. The advantage
of the warning is that the compositor is not killed and that we can
observe the reason and find a usage pattern which triggers the condition.
With that we will hopefully be able to find the case where the buffer
is still referenced when being destroyed and fix that.
Reviewers: #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D1783
Summary:
This improves the cleanup of a shadow from client side. The server now
notices when the client destroyed the shadow.
Reviewers: #plasma_on_wayland
Subscribers: plasma-devel
Differential Revision: https://phabricator.kde.org/D1789
Sometimes the test is failing due to a wait on the signalspy not
working and then the cleanup triggers a heap-use-after-free.
This change tries to address the problem by using a QTRY_COMPARE
instead of a wait on signalspy.
If a PlasmaShellSurface got already created for a Surface, the
PlasmaShell::createSurface should return that one. This change justs
adds a check to an autotest to verify this condition.
Summary:
The event is sent to the client once all initial state is transmitted.
This means the client is able to see the PlasmaWindow completely created
and not in the intermediate state with further updates being pushed after
being created.
The client side API is adjusted to emit the windowCreated signal after
the initial state event is received. In addition if the window is already
unmapped, the signal will never be emitted which means the not valid
windows are not exposed to the client at all.
The tests are adjusted to reflect the new reality, which in most cases
just means removing the comment that this needs to be improved.
There is one kind of unrelated change included: when an empty icon is
set, the client side now creates a QIcon() instead of going through
QIcon::fromTheme. This wrong behavior was exposed now by the auto tests.
Reviewers: #plasma, hein
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1773
Summary:
If the surface passed in the transient request is to the surface of the
shell surface, KWin aborts. It's an obvious invalid request, so handle
it properly by sending an error.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1755
Summary:
So far ConnectionThread dispatched events without checking for (protocol)
errors. But Wayland errors are considered fatal. We do need to consider
them.
This change introduces a way to detect errors and expose them in
ConnectionThread. Errors are handled gracefully, they are exposed, but
not considered application fatal. E.g. a new ConnectionThread could be
created afterwards.
This allows to add tests to verify error conditions.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1753
Summary:
The idea of shipping a test server is to have something like Xvfb for
Wayland. To be able to run a test application with a fake Wayland server.
To make this super easy the test server binary is installed into libexec
directory and provides a cmake function to run a test application with
the test server.
The test server takes full control over the process. It's a guiless
application and starts the passed test application once it is fully
set up. The environment is setup to have the test application connect
to the fake server (WAYLAND_SOCKET env variable and QT_QPA_PLATFORM).
When the started application finishes the test server goes down and
exits with the exit value of the test application. This allows a good
integration with ctest.
The test server is a virtual server which supports the following
interfaces:
* Shm
* Compositor
* Shell
* Seat
* DataDeviceManager
* Idle
* SubCompositor
* Output (1280x1024 at 60 Hz with 96 dpi)
* FakeInput
This is sufficient to bring up a QtWayland based application and
allows some basic interactions from a test application (e.g. fake
input).
So far the server fakes a repaint every 16 msec, but does not yet
pass events to the test applications.
To integrate this into an application for testing use:
find_package(KF5Wayland CONFIG)
add_executable(myTest myTest.cpp)
target_link_libraries(myTest Qt5::Gui Qt5::Test)
kwaylandtest(myTest)
When now running ctest in the build directory the test server gets
started and will start the myTest binary and report the passed/failed
in the expected and normal way.
This way a test case can easily be run against both X11 and Wayland.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1726
Changelog: Virtual framebuffer server for auto tests
Summary:
So far we directly destroyed the resource on the server side. But this
causes a wayland error when the client tries to cleanup. This results in
the client being destroyed. A problem which brings down plasmashell
regularly when short living windows are shown. This happens e.g. in
Dolphin with the adress auto complete.
This change addresses the problem by creating a temporary
PlasmaWindowInterface for the already unmapped window. It doesn't get
added to the list of known windows and it's only purpose is to properly
handle the unmap and the destroy of the just created resource.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1734
Summary:
Destroying the SlideInterface on the server side before the client has a
chance to cleanup results in a protocol error:
wl_display@1: error 0: invalid object 7
Which would terminate the client. If we would not destroy the resource,
but only delete the SlideInterface it could result in heap-use-after-free.
So just don't do anything, the client needs to cleanup which will result
in the SlideInterface being deleted.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1714
Summary:
The destructor was not properly implement. Let's use the generic one
from Resource.
Test case is adjusted to verify that the SlideInterface gets cleaned up.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1713
Summary:
Unlike the other cases this one is not as dangerous as the shadow
protocol doesn't have a destructor request (yet).
Once that is added the problem would be the same: destroying the
ShadowInterface when the parent SurfaceInterface gets destroyed would
result in a protocol error on client side.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1711
Summary:
Destroying the ServerSideDecorationInterface on the server side before
the client has a chance to cleanup results in a protocol error:
wl_display@1: error 0: invalid object 7
Which would terminate the client. If we would not destroy the resource,
but only delete the ServerSideDecorationInterface it could result in
heap-use-after-free.
So just don't do anything, the client needs to cleanup which will result
in the ServerSideDecorationInterface being deleted.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1710
Summary:
Destroying the ContrastInterface on the server side before the client has
a chance to cleanup results in a protocol error:
wl_display@1: error 0: invalid object 7
Which would terminate the client. If we would not destroy the resource,
but only delete the ContrastInterface it could result in
heap-use-after-free.
So just don't do anything, the client needs to cleanup which will result
in the ContrastInterface being deleted.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1709
Summary:
Destroying the BlurInterface on the server side before the client has a
chance to cleanup results in a protocol error:
wl_display@1: error 0: invalid object 7
Which would terminate the client. If we would not destroy the resource,
but only delete the BlurInterface it could result in heap-use-after-free.
So just don't do anything, the client needs to cleanup which will result
in the BlurInterface being deleted.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1708
We saw it fail on build.kde.org a few times and it looks like a
entered spy gets triggered timing dependent (no surprise it's on
client side). So better check whether the entered spy got delivered
already and if not wait for the event.
Summary:
This change standardizes the behavior regarding the destructor request.
The destructor should destroy the resource and nothing else. The
Wayland library invokes the static unbind method once the resource is
destroyed. The implementation provided by Resource::Private::unbind
triggers a delete later on the Resource. So there is no need to trigger
a deleteLater from the destructor request callback.
This change adds a generic implementation to Resource::Private which is
now used by all inheriting classes replacing the custom implementations.
Test Plan:
For a few Resources the test is extended to ensure that the Resource
gets deleted on server side.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1679
Summary:
Not needed as the dtor of the Resource ensures that the wl_resource
gets destroyed.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1680
The text input change creates an additional serial, so the check
for last generated serial on the Display fails. The test is now
adjusted to the new semantics. A more reliable way would be to
verify the serial on the SeatInterface, though.
Summary:
This change introduces support for text input. Text input allows to
compose text on the server (e.g. through a virtual keyboard) and sent
the composed text to the client.
There are multiple interfaces for text input. QtWayland 5.6 uses
wl_text_input, QtWayland 5.7 uses zwp_text_input_v2.
wl_text_input is from pre Wayland-Protocols times and considered as
UnstableV0 in this implementation. The other interface is UnstableV2.
Unfortunately the V2 variant is not yet part of Wayland-Protocols, but
used in Qt.
The implementation hides the different interfaces as good as possible.
The general idea is the same, the differences are rather minor.
This means changes to how interfaces are wrapped normally. On client
side in the Registry a manager is factored which represent either of
the two interfaces. Similar on the server side Display's factory method
takes an argument to decide which interface should be factored. This
way a user of the library can expose both interfaces and thus be
compatible with Qt 5.6 and Qt 5.7 onwards.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1631
Summary:
When destroying a SurfaceInterface all callbacks are getting destroyed.
This used to iterate over the callbacks and performing
wl_resource_destroy on them. This triggered the destroy handler which
removes the resource from the callback list. Which means removing from
the list we are iterating on. This could result in a double delete or
accessing invalid memory.
This change copies all callbacks to a temporary list and clears the
normal lists. So the destroy handler does no longer modify the lists
currently being iterated on.
Test Plan: Added a test case which crashed with previous code
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1677
The ShellSurface might have the resource destroyed, before being deleted,
so there is a short time frame where resource might be null.
Crash was caught by KWin.
Reviewed-By: sebas and notmart
A downstream KWin test shows a possible heap-use-after-free if we
access the wl_client pointer. Basically we get the client disconnected
just before the focused surface gets unbind. Thus for a short moment
the ClientConnection pointer is gone. This needs to be extended with
a test case, but for the moment it should be good enough to get KWin
green again.
Summary:
So far the server component performed manual cleanup in some cases
when a client disconnects. But this is not needed: the Wayland library
calls the static unbind methods which do cleanup. If we cleanup ourselves
this can result in double deletes in the worst case, so let's only use
the Wayland functionality.
Adjusted:
* RegionInterface
* SurfaceInterface
* ShellSurfaceInterface (doesn't take a parent anymore)
* DpmsInterface
* QtSurfaceExtensionInterface
* KeyboardInterface
* PointerInterface
* TouchInterface
* DataOfferInterface
* PlasmaShellSurfaceInterface
For each adjusted case a test case is added to verify that the cleanup
works. Exceptions are DpmsInterface as the actual Resource is not exposed
at all in the Server component and DataOfferInterface as that is server
side created.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1640
From time to time the test is failing on build.kde.org with an ASAN
heap-use-after-free error. From my investigation this seems to be caused
by the OutputDevice being constructed on the stack and being destroyed
while handling Wayland events, but before all are handled.
The test mostly operates on the changed signal. There is also a done
signal emitted later on. Wayland sends the done after a set of changes
is transmitted. Thus the test is adjusted to wait for done instead of
changed. So we can ensure that all events are handled before the object
gets destroyed.
I have never been able to reproduce the problem locally, so I cannot
guarantee that the issue is solved for good. If it still happens more
investigation will be needed.
Summary:
When the model gets destroyed the lambda connections were still invoked
and could cause crashers.
Test Plan: Test case added and each one verified that it crashed
Reviewers: #plasma, hein
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1624
Summary:
There is a possibility that a PlasmaWindow is unmapped when the
PlasmaWindowModel gets created. In this situation the unmapped
PlasmaWindow will be deleted in the next event cycle. So far
PlasmaWindowModel didn't handle this situation and the model might
hold deleted objects due to this.
This change addresses this potential problem and ensures the model
gets updated when a PlasmaWindow is deleted.
Test Plan: Test case which exposes the problem is added
Reviewers: #plasma, hein
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1622
Summary:
So far when the active PlasmaWindow got unmapped or destroyed, the
PlasmaWindowManagement didn't update the activeWindow. This means it
could expose a deleted object through it's API which could result in
a crash.
This change addresses the problem by updating the active window when
a window gets unmapped or destroyed.
Test Plan: Tests added which exposed the problem
Reviewers: #plasma, hein
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1621
Summary:
The protocol is extended by a dedicated destructor request. When a
PlasmaWindow is umapped we no longer destroy the resource directly,
but only send the unmap. The client is then supposed to clean up
(which it already did in that case) and will invoke the destructor.
The PlasmaWindowInterface object will be automatically deleted after
the unmap once all resources bound for it are destroyed.
The tests are extended by two new test cases which triggered protocol
errors on the client side prior to this change.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1594
Summary: To use pid_t one should include sys/types.h -- else the build fails on FreeBSD.
Reviewers: graesslin
Reviewed By: graesslin
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1579
Coverity complains (in CID 1335150) about `Generator::parseInterface()`
since the default copy-ctor for `Interface` will end up copying
uninitialized memory (the unset `m_factory` member). Fixed by
initializing the m_factory.
REVIEW:127836
Summary:
Exposes closable state in the window model and adds tests. This was
included in the protocol and interface, but missing from the model.
Test Plan: Autotest extended.
Reviewers: graesslin
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1435
Summary:
Analogous to NET::ActionChangeDesktop.
KWindowInfo::actionSupported(NET::ActionChangeDesktop) is hardcoded
to return true in kwin, but that's not how it should be; as this will
be fixed later the Wayland protocol needs this state bit as well for
parity.
Test Plan: PlasmaWindowModel test is extended.
Reviewers: graesslin
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1448
Summary:
Adds states and request methods to determine whether a window can be put into
move or resize modes, and request move and resize modes, respectively.
request* naming pre-discussed with Martin. I chose to add *Mode to be more
explicit as well as avoid namespace conflicts with possible other Move/Resize
methods in the future.
Since these are not toggleable states, there is no requestToggle* methods.
Protocol version is not bumped (also pre-discussed with Martin) since we have
pending changes already bumping to 3.
Depends on D1417.
Test Plan: PlasmaWindowModel test extended.
Reviewers: graesslin
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1432
Summary:
This adds support for 'shadable' and 'shaded' states to the protocol and
to the client and server classes, as well as the window model.
Test Plan: The PlasmaWindowModel test has been extended to test the new states.
Reviewers: graesslin
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1417
Summary:
Surface/SubSurface and Shadow handle the case that an attached buffer
gets destroyed by the client. So far we didn't have this code covered,
but it's rather important as incorrect reference counting can hit
asserts.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1403
Summary:
KWayland does not have a client implementation of the QtSurfaceExtension
protocol. Thus the test is different: it starts a helper binary which
creates a QWindow. The test closes that one which should terminate the
started applications.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1388
Summary:
Basic functionality is covered. Changing of shadow elements not covered,
there seems to be lacking server API for that - no change signal.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1398
Summary:
Now also tests:
* requesting mode from client side
* update supported change on server side
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1357
If the focused pointer and keyboard surface is the same we use pointer
clicks as a hint to which child surface should have keyboard focus.
Keyboard focus handling for sub surfaces is rather limited overall.
We just don't have a good model on how to determine which child surface
should get the keyboard focus. When passing focus to a surface there
is no way to know which of the sub-surfaces should get the focus.
Ideally the client should handle this, but that's just not the case.
The best we have is a reference through the pointer. But that's of
course also limited. Keyboard focus passed to the surface for another
reason (Alt+Tab) cannot select the proper sub-surface without interaction
from another input device.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1330
Summary:
The idea behind this change is to make the existance of sub-surfaces
an implementation detail for pointer events. The user of the library
does not need to care about on which sub-surface the pointer is on.
It only needs to care about the main surface and passes the focus to
the main surface.
Internally the PointerInterface takes care of sending the enter to
the sub-surface at the current pointer position. Also whenever the
pointer position changes, the PointerInterface evaluates whether it
triggered a change for the focused sub-surface and sends enter/leave
events accordingly. If the focused sub-surface does not change, it
sends motion events as normally, but of course under consideration
of the sub-surface position.
Overall this means that from pointer usage perspective a user of the
library doesn't need to care about the fact that there are sub-surfaces
at all. The library does the correct thing for it.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1329
Summary:
The new method returns the (child) surface at a given surface position
taking care of stacking order, whether surfaces are mapped, etc.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1319
Summary:
This change introduces a damage tracking feature in SurfaceInterface.
So far the SurfaceInterface only exposes the damage compared to the
last attached buffer. But this is not always usefull for the user of
the library. E.g. if:
* server renders
* client damages buffer and commits
* client damages buffer and commits
* server wants render
In this situation the last damage information is not helpful to the
user of the library. It would need the combined damage information over
all attached buffers.
The new API combines the damage of the two commits in the example above.
The user of the library can then call resetTrackedDamage once it
processed the current damage (e.g. by updating the OpenGL texture).
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1281
Summary:
QtWayland doesn't map the parent sub-surfaces in a sub-surface tree.
According to the spec this would mean also the child sub-surface is not
mapped. But being strict according to the spec will make applications
like SystemSettings fail badly. Embedded child windows will not be
rendered and QtWayland is going to hard freeze. This is not acceptable,
thus we need to workaround this QtWayland bug till it's fixed.
It's worth mentioning that Weston as the reference compositor also
doesn't handle this situation according to spec and renders the
sub-surface. See https://bugs.freedesktop.org/show_bug.cgi?id=94735
The difficult part for the workaround is to determine whether a surface
should be considered unmapped. E.g. when the parent gets unmapped we need
to really unmap it. But what's the difference between an unmapped parent
surface which should be considered mapped and an unmapped parent surface
which should be considered unmapped?
The implementation goes with considering a new sub-surface always as
mapped - independently of whether it ever got a buffer attached. As soon
as it had a buffer attached and it gets unmapped again, it will go back
to a standard conform way.
The behavior now is not standard conform, thus the autotest is adjusted
to have QEXPECT_FAIL for the now no longer standard conform areas.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1250
Summary:
If a Surface doesn't have a buffer attached and a null buffer gets
attached the buffer state doesn't really change. Thus neither the
unmapped signal nor the damaged signal should not be emitted.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1261
Summary:
New test case which verifies the behavior when a surface is considered
mapped or unmapped in a sub-surface tree.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1248
Summary:
In a SubSurface tree a Surface is only considered mapped if the Surface
has a buffer applied and the parent Surface is mapped.
The added method implements this check. It's useful for the compositor
to easily check this condition as it allows to easily figure out whether
a SubSurface needs to be rendered and it's also useful for implementing
the input handling as a not mapped sub-surface should not get any input
events.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1247
Summary:
This is a workaround for https://bugreports.qt.io/browse/QTBUG-52118
It should take effect whenever the parent surface's state is applied,
but QtWayland never commits the parent surface. Thus the position is
always wrong.
Having a workaround for that in our server code is not good, but better
than completely broken applications such as Systemsettings.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1212
Summary:
From spec:
If the wl_surface associated with the wl_subsurface is destroyed,
the wl_subsurface object becomes inert. Note, that destroying either
object takes effect immediately.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1211
Summary: Fixes errors in API of methods which should be const not being const.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1214
Summary:
See: https://bugreports.qt.io/browse/QTBUG-52092
Freeze happens if a sub-surface is rendered to before the main surface
is rendered. The compositor has no chance to know that this is a window
which needs to be rendered, thus the application might freeze without
ever becoming visible.
Famous example applications being affected: all kcms with a nested
QQuickView. E.g.: kcmshell5 kwineffects
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1208
Summary:
Recursively go up to the main surface, that is the top level surface
which doesn't have a parent.
This is useful to know to which surface tree a sub-surface belongs to.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1207
QtWayland doesn't commit the parent surface when creating a sub-surface.
This results in a QtWayland application to freeze as it renders to the
surface and waits for the frame rendered, which it will never get as the
Compositor waits for the commit on the parent prior to mapping the
sub-surface.
To work around this behavior, we apply the adding/removing directly.
The behavior around this is actually not fully documented, so QtWayland
is not wrong per se. See:
https://lists.freedesktop.org/archives/wayland-devel/2016-March/027540.html
Once this is properly clarified and implemented in the Client, we should
revert this change.
Differential Revision: https://phabricator.kde.org/D1191
The idea behind this signal is to notify whenever the tree of sub
surfaces changes in a way that a repaint of the Surface is required.
Possible situations are:
* surface damaged
* surface unmapped
* subsurface added/removed
* subsurface moved (position changed)
* subsurface stacking changed
Ideally it would be possible to provide the actual area which needs
repainting, but due to the possible complexity of the tree, synced
and desynced changes this doesn't look worth the effort. A user of
the signal might trigger too many repaints with it, but if it really
wants to be only notified about the actual changes, it can just track
the individual sub-surfaces.
When committing the state of a sub-surface, the state should not
be immediately applied if the sub-surface is in synchronized mode.
Instead it should be cached and only applied after the parent surface's
state is applied.
To implement this the Surface::Private has now a third cached state
buffer. When committing the state is either swapped between pending and
current or pending and subSurfacePending. Once the parent state is
applied the state is swapped between subSurfacePending and current.
The logic for applying state changes is changed. Instead of copying the
complete state object, the individual state changes are now copied and the
source gets completely reset to default values. Only the children tree is
copied back, as that list needs to be modified.
The mode is not sufficient to determine whether a SubSurface is in
synchronized mode.
Quoting spec:
"Even if a sub-surface is in desynchronized mode, it will behave as in
synchronized mode, if its parent surface behaves as in synchronized mode.
This rule is applied recursively throughout the tree of surfaces.
This means, that one can set a sub-surface into synchronized mode, and
then assume that all its child and grand-child sub-surfaces are
synchronized, too, without explicitly setting them."
The test application creates a sub-surface tree consisting of overall
three surfaces:
* blue main surface
* red sub surface
* green sub surface to the red sub surface
All surfaces are in synchronized mode. There is a timer to turn the
green surface into yellow after five seconds.
Summary:
The wrapper for wl_surface::set_buffer_scale was still missing.
Main reason for implementation is the need for the added auto-test.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1188
Summary:
The ServerSideDecorationManager gains a new event which gets sent
to the client when it binds the manager. The event indicates the
default server decoration mode used by the server. This allows the
client to know the decoration mode when it creates a decoration and
thus does not need to roundtrip to the server to get the mode.
Reviewers: #plasma, sebas
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1129
DataDevice exposes new methods to get the DataOffer provided through
drag'n'drop and also signals to indicate the various changes on the
DataDevice during drag'n'drop.
This allows to add a first basic auto test for the drag'n'drop
functionality covering both server and client side.
Summary:
How drag'n'drop works on Wayland:
When a surface has a pointer grab and a button pressed on the surface
(implicit grab) the client can initiate a drag'n'drop operation on the
data device. For this the client needs to provide a data source
describing the data to be transmitted with the drag'n'drop operation.
When a drag'n'drop operation is active all pointer events are interpreted
as part of the drag'n'drop operation, the pointer device is grabbed.
Pointer events are no longer sent to the focused pointer but to the
focused data device. When the pointer moves to another surface an
enter event is sent to a data device for that surface and a leave
event is sent to the data device previously focused. An enter event
carries a data offer which is created from the data source for the
operation.
During pointer motion there is a feedback mechanism. The data offer
can signal to the data source that it can or cannot accept the data
at the current pointer position. This can be used by the client being
dragged from to update the cursor.
The drag'n'drop operation ends with the implicit grab being removed,
that is the pressed pointer button which triggered the operation gets
released. The server sends a drop event to the focused data device.
The data transfer can now be started. For that the receiving client
creates a pipe and passes the file descriptor through the data offer
to the sending data source. The sending client will write into the
file descriptor and close it to finish the transfer.
Drag'n'drop could also be initiated through a touch device grab, but
this is not yet implemented.
The implementation in this change focuses on the adjustments for pointer.
For the user of the library drag'n'drop is implemented in the
SeatInterface. Signals are emitted whenever drag is started or ended.
The interaction for pointer events hardly changes. Motion, button press
and button release can still be indicated in the same way. If a button
release removes the implicit grab the drop is automatically performed,
without the user of the library having to do anything.
The only change during drag and drop for the library user is that
setFocusedPointerSurface is blocked. To update the current drag target
the library user should use setDragTarget. Sending the enter/leave to the
data device gets performed automatically.
The data device which triggered the drag and drop operation is exposed
in the SeatInterface. The user of the library should make sure to render
the additional drag icon provided on the data device. At least QtWayland
based applications will freeze during drag and drop if the icon doesn't
get rendered.
The implementation is currently still lacking the client side and due to
that also auto test. It's currently only tested with QtWayland clients.
Reviewers: #plasma, sebas
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1046
Summary:
The Cursor wasn't properly initialized. E.g. the damage signal didn't
get connected resulting in the server not noticing when the cursor
changes. The damage only got connected if a new cursor got instelled by
the client on the same pointer.
This change ensures that the Cursor is properly initialized by calling
into the same method as when the cursor changed.
The tests are extended by a new test case for damaging the surface.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1022
Summary:
The signal gets emitted whenever the focused PointerInterfaces gets
newly set or reset to nullptr. This is needed to better track the
current cursor image in the compositor.
Reviewers: #plasma, sebas
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1007
Summary: Convenient API to get the absolute executable path for the pid.
Reviewers: sebas, mart
Subscribers: plasma-devel
Differential Revision: https://phabricator.kde.org/D858
This patch transports the EDID data base64-encoded over the wire.
Apparently, we can't just send random QByteArrays as "strings" over, it
has to be encoded and decoded. So...
* base64-encode the data before sending to the client
* base64-decode it on the client side
* document the above, fix documentation woes in the xml definition
* change test accordingly
The test data used was actually invalid, it's a base64 string of the
actual data, so fix the tests (which actually breaks it), and encode on
the server-side and decode on the client side.
REVIEW:126380
So far we only supported mapping global to surface-local coordinates
using a 2D-offset. With this change it's possible to register a
QMatrix4x4 to describe the transformation for going from global to
surface-local coordinates in a full 3D space.
The existing 2D-offset is transformed to use the new matrix based
variant describing a translation.
REVIEW: 126271
A system isn't idle by definition below 5 sec. Before it's not possible
to properly determine whether the user is still interacting with the
system or not. Thus such a short timeout is not sufficient to determine
whether the system is idle.
Furthermore allowing short timeouts like 1 msec can be used to gather
information from the system. It would allow to reconstruct the timestamp
changes on the seat very reliable, which we do not want a Client to know.
And also this can be used to get events on each key press and key release
and the time between each of the events. This can be used to gather
statistics which would in worst case allow to reconstruct what the user
is typing. Determining where a word starts and ends should be relatively
straight forward if you know the timing. With the length of the word and
the statistics of alphabetic distribution it becomes possible to
reconstruct some words. And also individual letters. With enough
statistic and some known words one can determine how long it takes to
press a certain letter. At that point the idle interface would be a
keylogger.
To prevent such attacks the timestamp is now modified to be at least
5 sec. Why 5 sec? Because it's the smallest timestamp used in the
KIdleTime example application which I do not want to break.
5 sec are long enough to destroy this possible attack.
REVIEW: 126220
After deleting an OutputInterface the resources are not necessarily
destroyed, so unbind might still be called. The existing code just
casted the resource's user data which could then point to invalidated
memory.
This change verifies that we still have a Private* for the resource.
If not, it doesn't have to do any cleanup anyway.
REVIEW: 126097
Wrapper around wl_client_destroy. In case the ClientConnection got
created through Display::createClient we need to destroy the
ClientConnection again. The exiting client will not cause it to be
destroyed.
Reviewed-By: Bhushan Shah
This implements the server part of the screen management protocol. The
protocol is implemented as a wayland protocol.
It provides the following mechanisms:
- a list of outputs, close to wl_output, with additional properties for
enabled, uuid, edid, etc.. These OutputDevices correspond to a
connected output that can be enabled by the compositor, but is not
necessarily currently used for rendering.
- a global OutputManagement, which allows creating config objects, one
per client. The client can make changes to the outputs through
setScale(outputdevice*, scale) for example.
- an OutputConfiguration resource, that can be handed to a client and
used for configuration. Changes are double buffered here. Only after
OutputConfiguration.apply() has been called, the changes are relayed
over the global OutputManagement.
The compositor is responsible to handle changes.
For a more detailed description, see the API docs in especially
outputconfiguration.h.
REVIEW:125942
this exposes the geometry of taskbar entries in
plasma-windowmanagement, in order to make the
minimize effects possible.
unlike on X11, it takes relative positions and
it has one geometry per panel, making possible
to have multiple taskbars working.
REVIEW:125871
A transient surface can indicate through the flags that it does not
want to accept keyboard focus. This is now exposed through a dedicated
method.
REVIEW: 125552
So far transient was a mutual exclusive mode causing a transient window
to not be able to be fullscreen. This seems wrong. Let's have transient
still as a dedicated mode allowing the window to be maximized and/or
fullscreen. Only popup stays a dedicated mode.
REVIEW: 125468
On client side a setTransient method is added which wraps the semantic
of wl_shell_surface_set_transient.
On server side both set_transient and set_popup are implemented, though
for popup only the transient part is implemented. In particular the grab
is not yet handled and also no popup done is provided.
For the transient on server side the flags are ignored. Main reason is
that Qt does not use the flag, so testing whether it works is tricky
(needs a test application).
REVIEW: 125223
* wl_data_device_manager -> version 2
* wl_data_device -> version 2
* Wayland -> version 1.7
Unfortunately the client side is not yet completely correct. We
need to call wl_data_device_release only if we have a data device
of version 2. But there is no easy way to test this. To change we
will need to introduce a client side version tracking.
BUG: 352663
Follows a useful change added in the kwaylandScanner tool the
s_version becomes part of the Private class.
Also fixes the related generation in the tool.
* fix initializer type -- was hardcoded, seems like an oversight
* add semicolons after class declarations -- one less thing to fix in the
resulting code
REVIEW:125110
Uses QWidgets to render a very small UI.
* lists each Output
* for each output shows whether dpms is supported
* and which dpms mode it's in
* and provides a button to change the mode
Adding support for a org_kde_kwin_dpms interface. On server side
Dpms is mostly bound to the OutputInterface exposing just a very
small manager. Whether Dpms is supported and which mode is used is
tracked directly on the OutputInterface.
In the header for each request a method is created, with following
features:
* ignores requests working as destructor
* adjusts return type for requests containing newId
* adds QObject *parent = nullptr for requests containing newId
* adds the arguements
* turns arguments from wayland into Qt types
In the cpp the same logic is applied. Methods are not properly
implemented and won't compile in the case of returning.
* parses the protocol
* can derive file name to generate from protocol name
* detects which interface is a global and which one is referenced
* generates client code for global and for resource
* comes with a mapping.txt file to translate wl -> KWayland
The small tool added here allows to automate the process of generating
the boiler plate for an interface. Currently it's able to generate the
Client side code representing a wl_global.
The tool does not get installed, so run it from build directory:
Example usage:
./kwaylandScanner -c Foo -f foo -g wl_foo
This will generate a wrapper for the wl_foo interface in files:
foo.h and foo.cpp
The class is called KWayland::Client::Foo.
The tool will be extended. Following things are on the TODO list:
* parse xml to get the Wayland names
* add listener (if needed)
* generate code for Wayland interfaces representing Resources
* generate the Server boiler plate
CCMAIL: mart@kde.org
CCMAIL: sebas@kde.org
* Raises wl_seat supported version to 4 in both server and client
* Raises wl_keyboard supported version to 4 in wl_keyboard
* wl_pointer and wl_touch are still on version 3
* Raises minimum Wayland version to 1.6
a protocol to activate the blur behind windows and to
optionally set a sub region of the window where to apply
the blur to, in case the window is shaped
REVIEW:125015
This change addresses the sometimes cumbersome to use API of Registry.
So far to bind an interface one needed to connect to the signals when
setting up the registry. There was no other way to get the name and
version at a later point. This made it difficult to use one Registry
in different parts of an Wayland application.
This change adds a convenient:
struct AnnouncedInterface { quint32 name; quint32 version;};
AnnouncedInterface interface(Interface) const
QVector<AnnouncedInterface> interfaces(Interface) const
The first one is meant for interfaces like wl_shm which is normally only
announced once. The latter one is meant for interfaces like wl_output
for which normally multiple interfaces can get announced.
Those methods can be used without having to connect to the announced
spy.
REVIEW: 124734
The shadow protocol is inspired by the KWin's X11 protocol and the
DecorationShadow in KDecoration2.
A shadow is attached to a surface (after a commit on surface) and
consists of several image parts (represented through a buffer):
* top-left
* top
* top-right
* right
* bottom-right
* bottom
* bottom-left
* left
In addition there is an offset on each side.
For more information see also the X11 protocol described at [1].
Note: the protocol is currently missing documentation and changing
the shadow is not yet properly delegated to the server API.
[1] https://community.kde.org/KWin/Shadow
This interface allows a client to fake input events and the server
might use them. There is an authentication mechanismn in place which
requires the server to mark the client as authenticated in order for
any events to be emitted at all.
This interface is intended for use cases like kdeconnect which allows
to remote control a device.
The idle time interface is modelled for the use cases of the KIdleTime
framework to allow providing a Wayland specific implementation.
It supports registering idle timeouts which are triggered on server
side if there has not been any user activity on the seat for the
requested amount of time. Once user activity resumes a resume from idle
signal is emitted.
In additon there is the possibility to simulate user activity which
simulates the resume from idle.
Sending a new PlasmaWindow as an event is quite problematic. The main
problem here is that it sends an id of 0 and this doesn't make sense
when the interface gets bound and all existing windows are send to the
client.
This changes the interaction to have the client create the resource for
the PlasmaWindow instead of the server creating it. The server generates
"window ids" and sends those to the client. The client now binds a
PlasmaWindow with the "window id" in the normal way.
In case the server doesn't know the id any more, it directly sends an
unmapped and destroyes the newly created resource again. It is not a
protocol error as that can happen (common example: file open dialog of
Qt 5 applications on Xwayland).
on xwayland clients, send mouse press, move and release
corresponding to touchDown, move and release
this gives a very basic touchscreen support on
xwayland clients
reviewed-by: Martin Graesslin <mgraesslin@kde.org>
Server can set a themed icon name, client gets it directly turned into a
QIcon. That only works with QGuiApplications as can be seen in the
adjusted paneltest.
Sends an umap to the client and destroys the resource afterwards.
The PlasmaWindowInterface gets automatically destroyed once there
are no more resources bound to it.
Check whether the resource for the Keyboard/Pointer/TouchInterface
is still valid before trying to use it.
This was hitting crashes in wayland during the wl_foo_send_enter
calls.
The Qt surface extension is a small protocol to allow exchanging
additional data between QWindows and the compositor. What we are
currently only interested in is the possibility to close a surface
from the Compositor.
Protocol description is copied from QtWayland 5.4.2 branch.
Before emitting the new damage we need to restrict it to the geometry
of the surface. That's required by the documentation and at least
QtWayland/OpenGL emits non-sense damage events.
If a resource is null, because e.g. the surface got already destroyed,
wayland will create an error while marshalling arguments causing
the connected client to in worst case abort.
Apparently we need to add a small delay after starting weston otherwise
it fails to connect on the CI system.
Additionally we switch to using headless-backend.so which should also
make the setup more robust.
Running real world applications (Xwayland) showed that it doesn't like
at all that we do a dispatch when we are going to flush. This caused
in a very reliable manner a "Connection closed" error in XWayland, taking
down the client and in return the (xwayland-enabled) server.
BufferInterface used to have a SurfaceInterface as parent. This could
result in easily hitting the abort condition that the BufferInterface
was still referenced when it gets deleted by just having one other
user referencing the BufferInterface.
There is no need to have the BufferInterface deleted when the
SurfaceInterface to which it belongs gets deleted. The BufferInterface
will get deleted once it's completely unreferenced and also has a
destroy listener.
Basically just wraps the size of the attached buffer. Convenience to
not have to go down to the Buffer to read the size.
TODO: apply buffer scale and transform.
Uses eglQueryWaylandBufferWL (if available) to determine the size of the
buffer. In order to do so, the server library links against egl (1) and
one needs to register the EGLDisplay in Server::Display by the user of
the library. For this a new method Display::setEglDisplay is added.
1: not using epoxy as it doesn't wrap the Wayland interfaces yet.
This change demonstrates how one can install a custom event dispatcher
before creating the QGuiApplication and how to process Wayland events
using the event dispatcher to e.g. start an Xwayland server prior to
creating the application.
It also allows to use
--platform wayland
on the test application. The wayland QPA plugin will connect to the
KWayland server started prior to creating the application.
Please note that such a setup will freeze unless QtWayland has commit
1e32e71 [1].
[1] 1e32e71403
This allows to start the Wayland server before the QCoreApplication is
created with an eventDispatcher being installed through
QCoreApplication::setEventDispatcher.
Instead of performing dispatchEvents for a hard coded number of
expected events from Xwayland, we use select on the pipe to figure
out whether Xwayland has started writing the display number. As long
as select does not indicate that the pipe is ready we need to dispatch
further events.
Anologous to the implementation in Pointer:
* signal entered and left
* Surface *enteredSurface()
The passed in keys are not yet passed along and
currently ignored.
Now the code handles correctly the attaching of a null buffer
(emits a signal unmapped) and if a commit doesn't have a pending
buffer it won't be reset. Damage requests are ignored if no buffer
has been attached yet.
Properly reset focus when surfaces get added/removed. E.g. when
writing in Kate additional surfaces are created for which we do
not want to pass focus.
If one passes StartMode::ConnectClientsOnly the socket in
XDG_RUNTIME_DIR is not created and instead one can only connect to
this server using the Display::createClient method. A very nice
solution to just have a Server and one dedicated Client talk to each
other.
The selection is supposed to be sent to the DataDeviceInterface just
before getting keyboard focus. In order to do that the SeatInterface
keeps track of the DataDeviceInterface which is the current selection
and the DataDeviceInterface of the focused keyboard client.
SeatInterface friends DataDeviceManagerInterface so that the latter
can register each created DataDevice for the SeatInterface.
The button state is a seat-global state and not a per pointer state.
All pressed/released and axis events are moved to the SeatInterface
and just invoke the related method on the focused surface pointer.
Makes PointerInterface more like other Interface classes wrapping
wl_resource. The most important change is the handling of the
focused surface. This is now kept in the SeatInterface and can also
be set if there is no PointerInterface for the client yet.
The unit tests had to be adjusted and some are also disabled as the
button events are not yet moved into SeatInterface.
This method is supposed to return the PointerInterface for the current
focused surface. At the moment it just creates the one global
PointerInterface. The existing SeatInterface::pointer method got
removed as that is actually wrong usage.
There can only be one focused surface per Seat, thus the information
should be hold in the seat.
This only adjusts the API, the actual data is still hold in the
PointerInterface. This still needs adjustment.
The ClientConnection is managed by Display. Whenever one tries to
get a ClientConnection for a wl_client* and it doesn't exist yet a
new one will be created and a clientConnected signal will be emitted.
Also there is a clientDisconnected signal.
ClientConnection provides access to pid, uid and gid. The idea is
to extend it to provide access to all the resources created for the
client.
Required information is passed through the ctor of Private.
::create is still virtual as ShellSurfaceInterface is retrieving
client information. This can be fixed once we have a better wl_client
encapsulation class.
The Resource base class is supposed to be used by all interface
classes which get created for a wl_resource.
Most interface classes are adjusted, but there are some exceptions:
* BufferInterface: is different as the wl_resource is already created
* PointerInterface and KeyboardInterface: those two need changes, the
implementation differs from all other interface implementations.
Version and interface get passed to the ctor allowing Global::Private
to implement ::create instead of providing a pure virtual method.
Also the static bind method is added to the Global::Private which
delegates into a pure virtual method.
New base class KWayland::Server::Global which all Interface classes
for a wl_global inherit. Furthermore there is a shared base class
for all the Private classes of that type.
The BufferInterface used nested calls of wl_shm_buffer_begin_access
and allowed multiple different BufferInterfaces to be in a block
between wl_shm_buffer_begin_access and wl_shm_buffer_end_access.
But this is not allowed: nesting is only possible if it accesses
the same buffer!
This resulted in an abort when we accessed two BufferInterfaces
at the same time. The added test case aborts in the previous
version.
The fix now changes the semantic of the method. The BufferInterface
doesn't hold the QImage any more, but creates a new one every time
::data is invoked. The QImage is created with a custom cleanup
function which calls to wl_shm_buffer_end_access. It ensures that
we don't call into wl_shm_buffer_begin_access as long as there is
a valid QImage for any other BufferInterface still around and
instead returns a null QImage.
Thus a user of a BufferInterface::data should destroy the returned
QImage as soon as it's no longer needed or create a deep copy if
it needs to be kept around.
Counter part for the copyClient test app: the pasteClient test app
creates and maps a shell surface and waits for selection announce,
initiates the copy/paste mechanismn and prints out what got pasted.
After success it closes itself.
The test application copyClient creates a ShellSurface, maps it as
fullscreen, renders a green buffer and when it gets pointer focus it
sets "foo" in mimetype "text/plain" into the selection.
This test application "testRenderingServer" is able to start a
Wayland server and uses a QWidget to render the "scene". It manages
ShellSurfaces and renders them on the QWidget in a very static way.
Furthermore input events (key, pointer, wheel) are forwarded to the
top most Surface.
This test server is able to support kwin_wayland as a client, but
weston's test application in latest release fail due to missing
xdg_shell support.
Qt::MouseButton is mapped to the linux buttons. The mapping does
not match the mapping used in QtWayland module [1] as that seems
to be incorrect to me. E.g. Qt::BackButton is not mapped to BTN_BACK.
[1] qtwayland/src/client/qwaylandinputdevice.cpp
Proof-of-concept code illustrating how to start a Wayland server
before creating the QGuiApplication and also starting an Xwayland
server before creating the QGuiApplication. Thus the QGuiApplication
is able to connect to the Xwayland server started in the same
application.
Event dispatching in Display requires a QSocketNotifier which
requires the QCoreApplication to be created. This requirement renders
it impossible to create the server before the QCoreApplication is
created. But there are use cases which need this:
Let's assume we want to integrate a wayland server into an existing
X11 dependent application which uses QApplication and enforces the
xcb plugin. This means said application requires that an X Server is
up and running before the QApplication is created. If we want said
application to connect to an Xwayland server we need to be able to
create the Wayland server AND the Xwayland server before creating
the QApplication.
The solution is to only create the socket notifier if the
QCoreApplication exists. For the case that it doesn't exist an
additional method is added which needs to be called once the
QCoreApplication got created. In addition a manual event dispatch
method is added which allows to block for events when we don't
have a QSocketNotifier set up yet.
Only selection part is implemented, drag'n'drop still needs to be
implemented.
Unit test is not properly testing whether the data can be transferred.
This needs some better architecture to have multiple processes which
perform the source and target part.
This implements the subcompositor and subsurface protocol on both
Client and Server side.
Client:
New classes SubCompositor and SubSurface. The SubCompositor can be
created through the Registry and creates the SubSurface which is
bound to a Surface and has a parent Surface. The SubSurface class
provides convenient wrappers for all calls exposed in the
wl_subsurface interface.
Server:
New classes SubCompositorInterface and SubSurfaceInterface. Support
for all commands is added, though the API probably still can need
some fine tuning. The synchronized vs. desynchronized behavior is
not yet exposed in the API. This could also be delegated towards
the user of the library.
This makes it possible to install and then use it. Installation is still
commented since we can't give enough stability guarantees for now.
In detail:
- do not actually install headers
- generate the export header into Wayland/Server
- include it from there
REVIEW:120579
Emitted when the Wayland display is done flushing the initial interface
callbacks, announcing wl_display properties. This can be used to compress
events. Note that this signal is emitted only after announcing interfaces,
such as outputs, but not after receiving callbacks of interface properties,
such as the output's geometry, modes, etc..
This signal is emitted from the wl_display_sync callback.
REVIEW:120471
The test started to fail on my system without changing anything. I
assume my system got an update to latest wayland version and it
looks like the registry doesn't announce anything if nothing is
registered. So now our display at least creates the Shm interface.
In addition the test case is slightly improved with a few smaller
changes added during the debug session.
The EventQueue is a wrapper for wl_event_queue. The usage is for the
case that the connection is in a different thread.
The EventQueue needs to be added to the Registry before Registry::create
is invoked. This ensures that the Registry gets added to the EventQueue
and all objects created by the Registry (and further down the tree)
will be added to the same EventQueue.
The auto-tests which already used a wl_event_queue are transited to the
EventQueue class. That's also the reason why there is no dedicated
unit test: the new code is sufficiently tested by the existing tests.
This makes the API more consistent and allows to properly cleanup
Keyboard and Pointer if the connection dies. Like with Shell and
ShellSurface signals are emitted from Seat when the interface is
going to be released or destroyed. These are connected to the
methods of the created Pointer and Keyboard.
The Buffers are exclusively hold by ShmPool. The user of a Buffer is not
supposed to delete it as a no longer used Buffer should be reused by the
ShmPool.
To make it obvious that the ownership of the pointer is not passed to the
user the return type is changed to QWeakPointer. This also allows the
ShmPool to destroy Buffers as needed.
The unit test found a few problems which are now addressed
* getBuffer did not check the format when reusing a buffer
* creatBuffer used the wrong method on QSize to check whether it is empty
* destroy didn't call destroy on the Buffer. This is now added by moving
the Buffer::Private in a dedicated header which can also be included
from the ShmPool
Ensure that we do not connect to a version which our client library
does not support. If we would allow higher versions we would run the
risk that the wayland library calls into not existing callbacks.
It also adds a
static SurfaceInterface *get(wl_resource*)
to SurfaceInterface which can find the SurfaceInterface for the
given wl_resource. This is needed for ShellSurfaceInterface which
can no longer just cast the wayland user data.
Framework style build system which generates two libraries:
* KF5WaylandClient
* KF5WaylandServer
autotests are adjusted to compile again. They need to be changed to
use the libraries once the export header gets generated.
So far the Seat interface is provided together with pointer and
keyboard. As always touch is not yet implemented. The pointer interface
is still lacking the set cursor callback. Keyboard on the other hand is
complete.
Both Keyboard and Pointer have the concept of a focused surface and only
to the bound interface belonging to the same client as the focused
surface events are sent.
The change comes with a set of new auto tests also verifying the client
side which wasn't possible before as we couldn't fake events.
So far the Seat interface is provided together with pointer and
keyboard. As always touch is not yet implemented. The pointer interface
is still lacking the set cursor callback. Keyboard on the other hand is
complete.
Both Keyboard and Pointer have the concept of a focused surface and only
to the bound interface belonging to the same client as the focused
surface events are sent.
The change comes with a set of new auto tests also verifying the client
side which wasn't possible before as we couldn't fake events.
So far the Seat interface is provided together with pointer and
keyboard. As always touch is not yet implemented. The pointer interface
is still lacking the set cursor callback. Keyboard on the other hand is
complete.
Both Keyboard and Pointer have the concept of a focused surface and only
to the bound interface belonging to the same client as the focused
surface events are sent.
The change comes with a set of new auto tests also verifying the client
side which wasn't possible before as we couldn't fake events.
ShellSurfaceInterface is not yet completely implemented. Several parts
are still TODO, e.g. move/resize is missing, setting to maximized is
missing and also flags for fullscreen are missing.
The surface test is extended as far as possible.
ShellSurfaceInterface is not yet completely implemented. Several parts
are still TODO, e.g. move/resize is missing, setting to maximized is
missing and also flags for fullscreen are missing.
The surface test is extended as far as possible.
So far this new module contains:
* Display
* OutputInterface
Display manages the server socket and server event loop. In general it's
the entry point to any part of the server.
OutputInterface is the abstraction for the wl_output interface on server
side. An OutputInterface is created through the Display.
The auto tests for ConnectionThread and Output are adjusted to use the
internal server instead of starting Weston. Especially the Output test
could be extended to test much more as we have absolute control over
the server now.
The Display provides a method to create the shm pool and a
BufferInterface class is added to the server module. It is created
from the SurfaceInterface when a buffer gets attached to the surface.
The BufferInterface can be referenced and once its unreferenced it
sends a buffer release to the client and destroys itself.
For the case that the buffer is a shm buffer the BufferInterface
provides a convenience method to turn it into a QImage.
The auto test for Surface is extended by attaching buffers to the
surface and verifying that the content is correct.
The Display provides a method to create the shm pool and a
BufferInterface class is added to the server module. It is created
from the SurfaceInterface when a buffer gets attached to the surface.
The BufferInterface can be referenced and once its unreferenced it
sends a buffer release to the client and destroys itself.
For the case that the buffer is a shm buffer the BufferInterface
provides a convenience method to turn it into a QImage.
The auto test for Surface is extended by attaching buffers to the
surface and verifying that the content is correct.
As far as it's currently possible to implement. CompositorInterface is
able to create a surface and emits the created SurfaceInterface. It
does not yet support regions.
The SurfaceInterface is already more complete. It keeps track of the
double buffered states and emits signals when one of the values are
changed after the committing. It supports frame callbacks and has a
hook to mark the frame as rendered.
What's still missing are the regions (as it's not implemented in
CompositorInterface) and attaching the buffer as we do not yet support
creating shm buffers and pools.
The client side test is changed to use our own server and extended to
test damage and frame callback. The test needs to be extended for scale
and transform, but that is still missing in the client side
implementation.
As far as it's currently possible to implement. CompositorInterface is
able to create a surface and emits the created SurfaceInterface. It
does not yet support regions.
The SurfaceInterface is already more complete. It keeps track of the
double buffered states and emits signals when one of the values are
changed after the committing. It supports frame callbacks and has a
hook to mark the frame as rendered.
What's still missing are the regions (as it's not implemented in
CompositorInterface) and attaching the buffer as we do not yet support
creating shm buffers and pools.
The client side test is changed to use our own server and extended to
test damage and frame callback. The test needs to be extended for scale
and transform, but that is still missing in the client side
implementation.
So far this new module contains:
* Display
* OutputInterface
Display manages the server socket and server event loop. In general it's
the entry point to any part of the server.
OutputInterface is the abstraction for the wl_output interface on server
side. An OutputInterface is created through the Display.
The auto tests for ConnectionThread and Output are adjusted to use the
internal server instead of starting Weston. Especially the Output test
could be extended to test much more as we have absolute control over
the server now.
So far this new module contains:
* Display
* OutputInterface
Display manages the server socket and server event loop. In general it's
the entry point to any part of the server.
OutputInterface is the abstraction for the wl_output interface on server
side. An OutputInterface is created through the Display.
The auto tests for ConnectionThread and Output are adjusted to use the
internal server instead of starting Weston. Especially the Output test
could be extended to test much more as we have absolute control over
the server now.
Technically the Surface itself does not have a size, it's the
ShellSurface or the size of the FullScreenShell's Output. But it
simplifies a lot if we keep track of the size in the Surface as that
way we can hide the fact which kind of Shell is used.
The user of the Surface must connect either the FullscreenShell's
Output or the ShellSurface to set the size on the Surface.
A Surface class is split out which holds a wl_surface and supports
attaching a buffer, setting the damage and emitting a signal when the
frame callback got called.
It doesn't come with a unit test yet as it first needs the ShmPool
and Buffer properly split out to easily set it up.
New classes Shell and ShellSurface are created. Both are in shell.[h|cpp]
to indicate their close relationship with the Shell having to create the
ShellSurface.
WaylandBackend is adjusted to hold a Shell* and ShellSurface* instead of
the lower level structs. This also required adjustements to the creation
of the Backend as it now doesn't set a default size any more. Thus the
backendReady signal may not be emitted before the initial configure
event arrived. This also makes it easier to support either the fullscreen
shell or wl_shell at the same time.
Of course a unit test is added for the two new classes. This needs to
be extended once we have more control over the mock Wayland server.
At the same time adding an autotest for the Output, moving the listener
into the Output class and providing enums for Subpixel and Transform.
KWin now requires wl_ouput interface version 2 as that allows us to emit
the changed signal in a better way.
The unit test is not yet capable of testing everything, we need a mock
Wayland server which is more flexible.
The FullscreenShell is a Wayland protocol provided by Weston to have
exactly one surface per output. This is exactly what KWin needs. So
in case the Wayland server we connect to provides the FullscreenShell
we prefer it over the normal Shell and mapping our surface as fullscreen.
The protocol is not yet part of wayland-client library, so the header
and source file needs to be generated. This is done during the build
process using the external tool wayland-scanner. The protocol
description is copied from the Westion 1.5 sources.
REVIEW: 119839
The Wayland::Registry class wraps wl_registry handling. It keeps track
of the interfaces in the registry and emits signals whenever a known
interface gets announced or removed. So far it only tracks the interfaces
which are used and needed by KWin.
The Wayland event queue is moved into a dedicated thread and a
new class is created for just creating the connection and listening
for events. The WaylandBackend creates the thread and uses an event
queue for the main thread.
REVIEW: 119761
