One resource is used for shader version 1.10 and one for version 1.40.
The ideas behind this change is to remove the locating of the shader
sources and also to fix that user provided shaders could be loaded
instead of the original ones (possible attack vector on Wayland).
To simplify the ShaderManager provides a new method call to load the
shader from the resource. This means the effects don't need to
duplicate the check for the shader version any more and also don't
need to duplicate the file reading functionality.
REVIEW: 126905
This method allows to generate a shader with ShaderTraits but one
part (e.g. vertex and/or fragment) to be replaced by custom shader
code.
Thus it can be used as a replacement for the load*(ShaderType) variants
and allows more effects to transition to shaders using traits.
The way nearestPowerOfTwo is currently defined allows for the possibility of
left-shifting an int by 32 bits or more, which is undefined behavior on
platforms where int is 32 bits, and is something that can happen here if `s`
is equal to 31 by the end of the loop. Noted by Coverity as CID 1291191.
This patch takes an algorithm to perform the same operation from Hank Warren
Jr.'s book "Hacker's Delight", which should avoid UB.
REVIEW:126540
This adds new API in ShaderManager that makes it possible to request a
shader based on a set of traits. ShaderManager generates these shaders
on demand and caches them in a hash table.
Instead of getting size from displayWidth() and displayHeight() use
the information we have from Screens. This means there is only one
place to have the information and by that we can ensure that all
components use the same data to rely on. displayWidth/displayHeight
seem to provide the wrong information when unplugging an output
without disabling the output. This results in rendering artefacts.
But KWin::Screens has the correct information available.
It doesn't make sense to convert the extension names to QStrings.
This also replaces the QString parameter in hasGLExtension() with
a QByteArray and adjusts all callers.
* add static cleanup handlers to GLTexturePrivate and GLRenderTarget
* revert the runtime resolved features (e.g. RenderTargets are not
supported once we run the cleanup code)
* clear the extension lists
* reset the version variables
REVIEW: 117484
KWin already has a de facto OpenGL 2 dependency through QML. Combined
with the fact that the OpenGL 1 backend is basically unmaintained and
also unused, it's better to remove it for the new major release.
This change includes:
* Removal of cmake option KWIN_BUILD_OPENGL_1_COMPOSITING
* Removal of KWIN_HAVE_OPENGL_1 compile option and all code
ifdef'ed with it (partially removal of if-else constructs)
* Removal of CompositingType::OpenGL1Compositing (flags are kept
as a core flag should get introduced)
* Driver recommendation for OpenGL1Compositing changed to XRender
(should be evaluated whether the drivers can provide GL2)
* Removal of configuration option "GLLegacy"
* Removal of fooMatrix function in kwinglutils
* Removal of ARBBlurShader
* Removal of legacy code path in GLVertexBuffer
* Removal of GLShaderManager::disable
* if-blocks with ShaderManager::instance()->isValid() removed
REVIEW: 116042
Completing the task of replacing all NULL to nullptr in all the files in
libkwineffects folder.
(also substituting some "0" used as nullptr with nullptr)
REVIEW: 114823
Assume that the default framebuffer has the same dimensions as the screen.
By not quering the dimensions of the viewport we don't risk serialization
in drivers that use threaded dispatch.
Prevents the possiblity of using shaders modified for color correction
without valid data from KolorManager. If that happened, everthing
blacked out.
Now the color correction shaders are enabled only after successfuly
contacting KolorManager.
The issue was highlighted after ab7e228d.
BUG: 321217
This reduces the size of the geometry that needs to be uploaded by
one-third, and allows kwin to take advantage of the post-transform
cache in the GPU.
Expose bindArrays(), unbindArrays() and add a draw() method that takes
an offset and a count. This makes it possible to upload geometry, call
bindArrays(), and then call draw() multiple times to draw different
subsets of the uploaded geometry.
These methods make it possible to write directly into the buffer object
when building vertex arrays.
If the buffer object cannot be mapped, the map() method will return
a pointer to local memory which will be submitted to the buffer object
with glBufferData() when unmap() is called.
This overload makes it possible to upload data of an arbitrary size and
type into the buffer object. The intent is for this method to be used
to upload interleaved vertex data.
This commit also adds setVertexCount() and setAttribLayout().
The rationale for decoupling attribute specification from data uploading
is that the attribute formats and layout change less frequently than
the vertex data.
The vertex count is also specified using a separate function to enable
the caller to upload data for multiple draw calls at the same time.
This patch adds a link() function, along with bindAttributeLocation()
and bindFragDataLocation().
These functions must be called after creating the program, but before
linking it.
A new ExplicitLinking flag must be passed to the constructor to prevent
automatic linking. This is to keep existing code working without
modifications.
Add an option to kcmcompositing in the 'Advanced' tab, to enable or
disable color correction. It is specified that it's experimental and it
needs Kolor Manager.
Before painting for a particular screen, ColorCorrection::setupForOutput
should be called.
A screen property is added for WindowPaintData.
In kwinglutils, The fragment shaders are intercepted before being
compiled and they get a couple of lines of code inserted in order to do
the color correction. This happens only when color correction is enabled, of
course.
For D-Bus communication with KolorServer, everything is async.
The implementation basically manages a set of color lookup tables for
different outputs and for different window regions. These are taken via
D-Bus. Each lookup table has around 700 KB.
This commit reintroduces the changes from the former merge with the
"color2" branch. In this form, it can be easily reverted.
REVIEW: 106141
This was originally added by d467fc1bdbcf69bd6ef213bd909633c2edfb6878,
to prevent alpha ending up to be 0 with blending disabled. Apparently,
that was a driver issue that is no longer present.
REVIEW: 107090
This merge is incomplete and it does not include the review number of
the associated review request. It should have been pushed as a single
commit, because the merged commits were not intended to be published in
their form.
This reverts commit dcba90263069a221a5489b1915c5cf1ca39d090c, reversing
changes made to 50ae07525c7fde07794e7548c3d6e5a69cb1a89d.
Conflicts:
kwin/scene_opengl.cpp
kwin/scene_opengl.h
If the build option is enabled KWIN_HAVE_OPENGL_1 is passed as a compile
flag when build against OpenGL.
This compile flag is meant to replace the KWIN_HAVE_OPENGLES. So far code
has been ifdefed for special behavior of OpenGL ES 2.0 and to remove
fixed functionality calls which are not available in OpenGL ES 2.0.
With this build flag the fixed functionality calls which are only used in
the OpenGL1 Compositor can be removed and keeping the KWIN_HAVE_OPENGLES
for the real differences between OpenGL 2.x and OpenGL ES 2.0.
E.g. a call like glColor4f should be in an
glColor4f(1.0, 1.0, 1.0, 1.0);
while a call like glPolygonMode should be in an
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
Building for OpenGL ES 2.0 of course implies that KWIN_HAVE_OPENGL_1 is
not defined.
The Egl backend is decoupled from the OpenGL ES build option which makes
it possible to use it as a replacement for glx.
To make this possible a new build flag is added when egl is available at
compile time and any egl specific code is now ifdefed with this flag
instead of the gles flag. In addition at runtime a windowing system enum
value is passed to the various detect methods to have egl/glx specific
detection for e.g. function pointer resolving.
By default egl is used if compiled with OpenGL ES, otherwise glx is used.
But in the non-gles case the windowing system can be selected through the
new environment variable KWIN_OPENGL_INTERFACE. Setting this variable to
"egl" the EglOnXBackend is used.
REVIEW: 106632
The ShaderBinder class can be used for the case that a block of code
should be executed with a given Shader being bound. This is useful for
all the cases where there is a if-block for OpenGL2 execution with a
Shader being pushed in the first line to the ShaderManager and popped in
the last line of the block. With the helper this can be simplified to:
ShaderBinder binder(myCustomShader);
or
ShaderBinder binder(ShaderManager::GenericShader);
The ctor of ShaderBinder pushes the given Shader to the stack and once
the helper goes out of scope it will be popped again from the stack.
In addition the helper can take care of OpenGL 1 compositing, that is it
just does nothing. So it can also be used where there is a shared OpenGL1
and OpenGL2 code path where the Shader should only be pushed in OpenGL2.
This basically removes all the checks for the compositing type before
pushing/popping a Shader to the stack.
REVIEW: 106521
The main usage of ShaderManager::isValid was to have OpenGL2 specific
code pathes. Now we have an actual OpenGL2Compositing type and we know
that the ShaderManager is valid if we have this compositing type and we
know that it is not valid on OpenGL1Compositing. This gives us a much
better check and allows us to use the isValid method just for where we
want to check whether the shaders compiled successfully.
In addition some effects require OpenGL2, so we do not need to check
again that the ShaderManager is valid. Such usages are removed.
Results in cleaner changes.
Put all the color correction stuff from SceneOpenGL in SceneOpenGL2.
Conflicts:
kwin/eglonxbackend.cpp
kwin/glxbackend.cpp
kwin/scene.h
kwin/scene_opengl.cpp
kwin/scene_opengl.h
SceneOpenGL turns into an abstract class with two concrete subclasses:
* SceneOpenGL1
* SceneOpenGL2
It provides a factory method which first creates either the GLX or EGL
backend which is passed to a static supported() method in the concrete
sub classes. These method can test whether the backend is sufficient to
be used for the OpenGL version in question. E.g. the OpenGL 2 scene
checks whether the context is direct.
The actual rendering is moved into the subclasses with specific OpenGL 1
and OpenGL 2 code. This should make the code more readable and requires
less checks whether a Shader is bound. This is now known through the
Scene: the OpenGL1 scene will never have a shader bound, the OpenGL2 scene
will always have a shader bound.
To make this more reliable the ShaderManager is extended by a disable
method used by SceneOpenGL1 to ensure that the ShaderManager will never
be used. This also obsoletes the need to read the KWin configuration
whether legacy GL is enabled. The check is moved into the supported
method of the OpenGL2 scene.
REVIEW: 106357
The implementation consists of a class in libkwineffects.
There are some slight modifications in the compositor. Regions for
different outputs are drawn at different times.
Currently only per output color correction is implemented. However, the
grounds are prepared for implementing per window color correction
easily.
The ColorCorrection class needs to communicate via D-Bus with a KDED
module, KolorServer, which is a part of KolorManager.
The only visible part for the user consists of a check box in the
advanced tab for the compositing KCM.
The actual correction is done by injecting a piece of code in the
fragment shader, code that does a 3D lookup into a special color lookup
texture. The data for these textures is obtained from KolorServer. All
D-Bus calls are async.
This patch adds an optional texture cache to the blur effect such that damaged windows in
front of the blurred region dont trigger a repaint of the whole blurred region which pretty
often results in a avalanche repaint of nearly the whole screen.
REVIEW: 101977
