Summary:
It turns out DRM connectors are not static and may change over time.
This patch refreshes them right before looking for new outputs.
BUG: 419061
FIXED-IN: 5.19.0
Test Plan:
Seems to work better, it's still not ideal but I think there's an unrelated bug
sending updates to clients.
Reviewers: #kwin, davidedmundson, meven
Reviewed By: #kwin, davidedmundson, meven
Subscribers: dalbers, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D28642
Summary:
As is KWin only had 1 Cursor which was a singleton. This made it impossible for
us to properly implement the tablet (as in drawing tablets) support and show where
we're drawing.
This patch makes it possible to have different Cursors in KWin, it makes all the
current code still follow the mouse but the tablet can still render a cursor.
Test Plan: Tests pass, been using it and works as well as before but with beautiful tablet cursors.
Reviewers: #kwin, cblack, davidedmundson
Reviewed By: #kwin, cblack, davidedmundson
Subscribers: davidedmundson, cblack, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D28155
Summary: No need to keep them around for no reason.
Test Plan: Tested the plugins I thought could be affected. Have been using it for a couple of days without problems
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D28062
Summary:
Set outputs enablement also when none outputs are present. This patch is
similar to earlier attempt at D17985.
BUG: 402827
BUG: 389551
BUG: 398680
BUG: 413758
Test Plan:
Starting without outputs, manual disconnects and DPMS changes. There is still
an issue when an output gets disconnected while the DPMS is off. But it's an
improvement already.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T10016
Differential Revision: https://phabricator.kde.org/D26511
Summary:
In some environemnts it is possible that udev detection of primary GPU
fails and it picks the first available card (normally card0). But it is
not desired, and it would be required to use different card (card1).
Introduce environment variable, which when used, will make it possible
to use different card node then one selected by udev.
You can use it like KWIN_DRM_DEVICE_NODE=/dev/dri/card1 kwin_wayland
Test Plan: Tested on the device where card0 was not usable for kms, but card1
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24051
Summary:
This patch further refines output management.
We go now through AbstractWaylandOutput virtual functions to enable and
disable outputs.
Dpms changes and enablement switches use separate code paths at start in the
Drm backend code since they are similar but not the directly same. Common code
is shared though, functions are renamed accordingly.
Asserts have been put in place to better understand and check the control
flow. A seemingly unnecessary call to DrmOutput::pageFlipped on reactivation
after Vt switch has been removed to allow for that.
In future patches we need to look additionally at the legacy mode switching
code path which was and is still not working and better handling of the
current monitor Dpms state. For example a monitor being switched off is not
properly acted on and the workspace still expanded.
Test Plan:
With one and two monitors:
* Dpms off/on
* Vt switches
* Screen disable/enable
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23600
Summary:
This lifts the enablement code for outputs from the DRM backend to Platform
allowing other Wayland backends in the future to use this interface as well.
To do that we also create some helper functions on Platform level and have to
spill some KWayland classes into AbstractOutput what motivates a further split
of Platform into a Wayland child class like for AbstractOutput.
Test Plan: Disabled and enabled an output in DRM session.
Reviewers: #kwin
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23545
Summary:
Since we now use in the backends the OutputDeviceInterface for output data
all access must be complete before the Wayland server goes down. For that
introduce a new function to prepare shutdown in the backends.
While at it also remove the output deletion, since they get deleted through
Qt's object system leading to crashes on double free.
Test Plan: Shutdown works without seg faults in the Drm backend.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23602
Summary:
With f013a4369c, cd6b69a4d2, d960be4b3f and edb200f6bc all possible
backends of a Wayland session have been ported to using the internal functions
of AbstractWaylandOutput's for managing outputs.
This removes the alternative code path used before in these backends, what
simplifies the code and is also a prerequisite to removing the Screens global
in the future.
Reviewers: #kwin, apol, zzag
Reviewed By: #kwin, apol, zzag
Subscribers: apol, kwin
Tags: #kwin
Maniphest Tasks: T11459, T11098
Differential Revision: https://phabricator.kde.org/D23485
Summary:
Position and most importantly scaling will likely be the same on the next run,
This saves a flicker round at startup when scaling is different of 1 initialising the view at 1 then jumping at whatever the user requested.
Test Plan: Restarted my system several times
Reviewers: #kwin, #plasma, romangg
Reviewed By: #kwin, #plasma, romangg
Subscribers: davidedmundson, zzag, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22292
Summary:
Every time a display gets connected/disconnected, every output will be
reinitialized. We don't really need to reset the scaling to 1 every time
we don't know, especially since the setting has been set voluntarily.
Test Plan: When I disconnect the external display, my laptop doesn't fallback to scale=1.
Reviewers: #plasma, apol
Reviewed By: apol
Subscribers: davidedmundson, ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D20521
Summary:
This is the initial implementation of a DRM backend based on the EGLDevice,
EGLOutput, and EGLStream extensions, supporting NVIDIA graphics hardware using
their proprietary driver. The new backend will be used if the environment
variable KWIN_DRM_USE_EGL_STREAMS is set. On initialization, it will attempt to
create an EGLDevice based on the DRM device currently in use and create
EGLOutputs and EGLStreams for any attached displays. These are used to control
presentation of the final composited frame. Additionally, it will register the
wl_eglstream_controller Wayland interface so that native EGL windows created by
clients can be attached to an EGLStream allowing buffer contents to be shared
with the compositor as a GL texture.
At this time there are two known bugs in the NVIDIA driver's EGL implementation
affecting desktop functionality. The first can result in tooltip windows drawn
by plasmashell to contain incorrect contents. The second prevents KWayland from
being able to query the format of EGLStream-backed buffers which interferes
with the blur effect. Fixes for both of these are currently in development and
should appear in an upcoming NVIDIA driver release.
Additionally, hardware cursors are currently not supported with this backend.
Enabling them causes the desktop to intermittently hang for several seconds.
This is also likely a bug in the NVIDIA DRM-KMS implementation but the root
cause is still under investigation.
Test Plan:
On a system with an NVIDIA graphics card running a recent release of their
proprietary driver
* Ensure the nvidia_drm kernel module is loaded with the option "modeset=1"
("# cat /sys/module/nvidia_drm/parameters/modeset" should print "Y")
* Ensure EGL external platform support is installed
https://github.com/NVIDIA/eglexternalplatform
* Ensure KWin was build with the CMake option
KWIN_BUILD_EGL_STREAM_BACKEND=ON (this is the default)
* Start a plasma wayland session with the environment variable
KWIN_DRM_USE_EGL_STREAMS set
* Ensure output from KWin OpenGL initialization indicates the NVIDIA EGL
driver is in use (as opposed to Mesa / llvmpipe).
* Desktop should be fully functional and perform smoothly.
Reviewers: #kwin, romangg, davidedmundson
Reviewed By: #kwin, romangg, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18570
Summary:
Currently there is no any good reason for keeping ScopedDrmPointer;
providing our own deleter for QScopedPointer would make more sense.
Given that we already have type that acts as a scoped pointer for drm
objects we can improve it a bit and make simpler, e.g.
DrmScopedPointer<drmModeConnector> connector;
is much simpler than
ScopedDrmPointer<_drmModeConnector, &drmModeFreeConnector> connector;
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: apol, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19905
Summary:
If hardware cursor support is not available when using the drm backend for
Wayland compositing, the software cursor texture will not be updated when the
cursor image changes, and it will still be drawn when no cursor image is set
(such as when running a full-screen game). Furthermore, the drmModeSetCursor
and drmModeMoveCursor functions will still be unnecessarily called when the
cursor is moved or hidden.
To correct this, SceneOpenGL should connect Platform::cursorChanged as opposed
to Cursor::cursorChanged to its texture update function, as only the former
will be emitted when the cursor is updated and the compositor should check if
the cursor is hidden and the software cursor image is not null before rendering
it. DrmBackend::moveCursor and DrmBackend::hideCursor should also return
immediately if using a software cursor.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18376
Summary:
On Wayland we cannot switch from OpenGL to QPainter compositor as this
would break any running OpenGL application. KWin registers it's
EGLDisplay to Wayland and without OpenGL this doesn't make sense any
more. We are not able to render OpenGL buffers in the QPainter
compositor.
While it's theoretically possible to switch from QPainter to OpenGL it
doesn't make any sense for the same reason. Any running OpenGL
application would be using llvmpipe and could not be switched to proper
OpenGL.
This change stores the selected compositing type in Platform and the
implementations can use it to restrict the supported compositors. On X11
we don't need this, all other Platforms implement the restriction. Thus
it's no longer possible to switch the backends at runtime.
Test Plan:
Adjusted tests run, no runtime test as gui doesn't support
switching to QPainter anyway.
Reviewers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19084
Summary:
With the new Output class we can set the gamma directly here. This is also
a stepping stone to adjust individual output gamma adjustment later on.
This means any future backend, which aims to support the color correction
frontend needs to use the Output class.
Test Plan: Night Color test still passes.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11803
Summary:
In order to separate high-level properties of individual outputs from
hardware-specific ones and access these, introduce a new generic class Output.
Also make the DrmOutput class directly a child class of this generic class.
The long-term goal is to get rid of the Screens global object on Wayland and
instead directly work with Output objects on compositing level.
This should enable us long-term to do direct scanout to hardware planes, what
I predict needs this generic output representation at one point.
Test Plan: Manually.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11781
Summary:
To do so leaves a dangling pointer on our pageFlipHandler
BUG: 396272
Test Plan: Wobbled a window whilst plugging a monitor in and out
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14210
With Wayland KWin needs to provide certain services, which were provided
before that by the Xserver. One of these is gamma correction, which includes
the - by many people beloved - functionality to reduce the blue light at
nighttime. This patch provides the KWin part of that. It is self contained,
but in the end will work in tandem with a lib in Plasma Workspace and a KCM
in Plasma Desktop, which can be used to configure Night Color.
* Three modi:
** Automatic: The location and sun timings are determined automatically
(location data updates will be provided by the workspace)
** Location: The sun timings are determined by fixed location data
** Timings: The sun timings are set manually by the user
* Color temperature value changes are smoothly applied:
** Configuration changes, which lead to other current values are changed
in a quick way over a few seconds
** Changes on sunrise and sunset are applied slowly over the course of few
minutes till several hours depending on the configuration
* The current color value is set immediately at startup or after suspend
phases and VT switches. There is no flickering.
* All configuration is done via a DBus interface, changed values are tested
on correctness and applied atomically
* Self contained mechanism, speaks directly to the hardware by setting the
gamma ramps on the CRTC
* Currently working on DRM backend, extensible to other platform backends in
the future
* The code is written in a way to make the classes later easily extendable to
also provide normal color correction, as it's currently done by KGamma on X
Test Plan:
Manually with the workspace parts and added integration tests in KWin using
the virtual backend.
BUG:371494
Reviewers: #kwin, graesslin
Subscribers: kwin, plasma-devel, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5928
Summary:
The addition of the test infrastructure is motivated by the regressions
caused by adding mode switching and transformation support.
A contributing factor to these regression is the fact that the DRM
platform does not have any tests. It is difficult to test this code as
it needs to work with hardware, thus we cannot use the real DRM library.
Instead we need to use mocking.
This change sets up some first basic tests with the help of a mockDrm
library. In order to better test the code as units the Drm classes are
slightly refactored. Most importantly the dependency to DrmBackend is
removed wherever possible and replaced by a simple int fd which is mostly
the only element used by the classes.
This first test introduces basic testing of a DrmObject. It is intended
to extend this to at least also test DrmPlane as a central piece of our
Drm platform plugin. This will also extend the tests of DrmObject.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8776
Summary:
We need to keep the DrmOutput object to still have the
WaylandOutputDevice.
Screens currently start off enabled as before.
In order to keep KWin to have a correct index based list of screens we
need to store a second vector of currently enabled outputs for the
screens interface.
Test Plan:
Had dual screens.
Disabled/Enabled each one through the kscreen KCM
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: ngraham, luebking, broulik, graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8796
Summary:
con->setOutput and crtc->setOutput is called in Output::~Output so this
is doing it twice redundantly.
More importantly Output::~Output calls crtc->blank(), which means we
need a valid CRTC object there.
Test Plan: Compiles
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: bshah, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8779
Summary: Mostly so DRM can report if it has AMS or not
Test Plan:
Ran on my DRM setup, printed debug.
Spawned nested compositor, printed debug on that
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8702
Summary:
So far all outputs shared the same dumb buffer for the cursor image.
This doesn't work any more when screen rotation is enabled. For rotated
screens the cursor image per output is different. On some it might be
rotated, on some not.
To solve this problem the dumb buffers are moved from the DrmBackend to
the DrmOutput. The DrmOutput now creates the cursor images itself and
can rotate them if needed. Thus we get nicely transformed cursors.
Test Plan: Rotated screens, moved cursor around, image properly rotated
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8664
Summary:
So far KWin does not know which Compositors the platform actually
supports. This results in KWin happily trying to use the OpenGL
compositor on fbdev or the QPainter compositor on hwcomposer although
that is obviously going to fail as the platform doesn't support this.
By adding a pure virtual method all Platforms can define what they
support. In a later step the Compositor can use this to create an
appropriate scene and also perform proper fallback handling in case the
scene creation fails.
Test Plan: Compiles
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8316
Summary:
The gbm_surface is owned by the EglGbmBackend, but it's not the only one
using it. The DrmSurfaceBuffer is also using it and needs it to destroy
the gbm_bo. Now this can become a problem in the following situation:
* a page flip is still pending
* the EglGbmBackend destroys the gbm_surface
-> when the page flip happens the DrmSurfaceBuffer will try to destroy
the gbm_bo and crash as the gbm_surface is no longer valid. This
situation can happen when switching screens or when switching compositing
backend (OpenGL 2 -> OpenGL 3).
To address this problem a class GbmSurface is added which wrapps the
gbm_surface pointer. The EglGbmBackend creates and holds a shared pointer
to the GbmSurface and passes that one to the DrmSurfaceBuffer. So when
cleaning up the gbm_surface only the shared pointer is reset and in case
the DrmSurfaceBuffer still needs it, it can access it without problems.
BUG: 385372
FIXED-IN: 5.11.0
Test Plan: Not yet
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8152
Summary:
After changing the output configuration, the client expects that it is informed
whether or not a new configuration has been applied (or failed). This was ommitted
so far, meaning that clients wouldn't know what happened in kwin.
Since we don't track if a setting failed yet, send the applied() signal regardless.
CCBUG:384733
Test Plan: Verified that the signal arrived in libkscreen after changing scale of an output
Reviewers: graesslin, davidedmundson
Reviewed By: davidedmundson
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7910
Summary:
In the DRM plugin the cursor is currently is drawn at the native size
given.
Therefore we don't want to scale the icon offset as that leads to it
being drawn every so slightly off-sync.
BUG: 384769
Fixed-in: 5.11.0
Test Plan:
Kate now selects lines based on the middle of the cursor, not the top left.
I'd previously gotten so used to it, I hadn't realised it was actually a bug :/
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7868
Summary:
When returning early in DrmOutput::present() because of some error KWin
didn't delete the proposed buffer, therefore not releasing the surface
lock of the GBM buffer to the EGL surface.
This patch makes sure that on any error in present we cleanup the proposed
DrmBuffer.
Reviewers: #kwin
Subscribers: #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6660
With the recent patches AMS should be stable enough for daily use. It was
tested by several people in the last week without reporting back any problems.
So make it the new default on master.
Leave an env variable for now to deactivate it, in case something bad happens.
Reviewers: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5934
Summary:
I keep having to re-add this patch locally to see which config is
actually in play.
Test Plan: Compiles
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5795
This patch makes the AMS execution path work with the new DrmCrtc and
DrmBuffer structure and solves major issues about:
* VT switching
* DPMS
* Hot plugging
* Logout
* Memory leaks
Test Plan:
Tested with Gl and QPainter.
Reviewers: #kwin
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5191
Split off GBM based buffers to a separate file, which gets only included,
when GBM is available.
Note, that this also removes the gbmCallback, since already before this
patch we did delete the buffers always without it.
The plan is to later use this file for via GBM directly imported Wayland
buffers as well.
Test Plan:
Tested with Gl and QPainter backends.
Reviewers: #kwin
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5179
To get an image from KWin to the screen in the DRM pipeline we combine a CRTC,
an encoder and a connector. These objects are static in the sense, that they
represent real hardware on the graphics card, which doesn't change in a
session. See here for more details:
https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-kms.html
Until now we used DrmOutput as the main representation for such an active
rendering pipeline. I.e. it gets created and destroyed on hot plug events of
displays. On the other side we had no fixed representation of the static kernel
objects throughout the lifetime of KWin. This has several disadvantages:
* We always need to query all available static objects on an hot plug event.
* We can't manipulate the frame buffer of a CRTC after an output has been
disconnected
* Adding functionality for driving multiple displays on a single CRTC (i.e.
cloning) would be difficult
* We can't destroy the last frame buffer on display disconnect because the CRTC
still accesses it and have therefore a memory leak on every display disconnect
This patch solves these issues by storing representations of all available CRTC
and Connector objects in DrmBackend on init via DrmCrtc and DrmConnector
instances. On an hotplug event these vectors are looped for a fitting CRTC and
Connector combinations. Buffer handling is moved to the respective CRTC
instance. All changes in overview:
* Query all available CRTCs and Connectors and save for subsequent hotplug
events
* Fix logic errors in `queryResources()`
* Move framebuffers, buffer flip and blank logic in DrmCrtc
* Remove `restoreSaved()`. It isn't necessary and is dangerous if the old
framebuffer was deleted in the meantime. Also could reveal sensitive user
info from old session.
Test Plan:
Login, logout, VT switching, connect and disconnect external monitor, energy
saving mode.
Reviewers: #kwin
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5118
Summary:
Libdrm 2.4.78 introduces a version 2 and if KWin gets built against it
our code would break. Given that this change is for Plasma/5.8 branch.
Closes T5839
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Maniphest Tasks: T5839
Differential Revision: https://phabricator.kde.org/D5380
Test Plan:
For the first time, actually plugged in my high DPI laptop.
Tested both 1x and 2x windows on 2 real displays one high DPI, one normal
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3498
