Summary:
Lot of mobile devices, as well as tablet devices use the DSI connector,
for internal screens. This is more common in ARM devices, so consider
them as internal display as well.
Test Plan: checked on the device with DSI screen, it was considered internal
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24209
Summary:
Rename ShellClient to XdgShellClient in order to reflect that it
represents only xdg-shell clients.
Test Plan: Compiles, tests still pass.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23589
Summary:
In some environemnts it is possible that udev detection of primary GPU
fails and it picks the first available card (normally card0). But it is
not desired, and it would be required to use different card (card1).
Introduce environment variable, which when used, will make it possible
to use different card node then one selected by udev.
You can use it like KWIN_DRM_DEVICE_NODE=/dev/dri/card1 kwin_wayland
Test Plan: Tested on the device where card0 was not usable for kms, but card1
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24051
We have lots of inconsistency at the moment in CMakeLists.txt files. Most
of it is due to kwin being a very old project. This change hopefully fixes
all of it.
Summary:
This patch further refines output management.
We go now through AbstractWaylandOutput virtual functions to enable and
disable outputs.
Dpms changes and enablement switches use separate code paths at start in the
Drm backend code since they are similar but not the directly same. Common code
is shared though, functions are renamed accordingly.
Asserts have been put in place to better understand and check the control
flow. A seemingly unnecessary call to DrmOutput::pageFlipped on reactivation
after Vt switch has been removed to allow for that.
In future patches we need to look additionally at the legacy mode switching
code path which was and is still not working and better handling of the
current monitor Dpms state. For example a monitor being switched off is not
properly acted on and the workspace still expanded.
Test Plan:
With one and two monitors:
* Dpms off/on
* Vt switches
* Screen disable/enable
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23600
Summary:
Make it more explicit what the relation is between Wayland and XDG objects
existing and enablement:
The ouput is enabled if and only if Wayland and XDG output objects exist.
We can simplify the code by replacing checks on the outputs with checking
the current enablement value.
Test Plan: Wayland nested and virtual backends.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23553
Summary:
This lifts the enablement code for outputs from the DRM backend to Platform
allowing other Wayland backends in the future to use this interface as well.
To do that we also create some helper functions on Platform level and have to
spill some KWayland classes into AbstractOutput what motivates a further split
of Platform into a Wayland child class like for AbstractOutput.
Test Plan: Disabled and enabled an output in DRM session.
Reviewers: #kwin
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23545
Summary:
Since we now use in the backends the OutputDeviceInterface for output data
all access must be complete before the Wayland server goes down. For that
introduce a new function to prepare shutdown in the backends.
While at it also remove the output deletion, since they get deleted through
Qt's object system leading to crashes on double free.
Test Plan: Shutdown works without seg faults in the Drm backend.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23602
Summary:
With f013a4369c, cd6b69a4d2, d960be4b3f and edb200f6bc all possible
backends of a Wayland session have been ported to using the internal functions
of AbstractWaylandOutput's for managing outputs.
This removes the alternative code path used before in these backends, what
simplifies the code and is also a prerequisite to removing the Screens global
in the future.
Reviewers: #kwin, apol, zzag
Reviewed By: #kwin, apol, zzag
Subscribers: apol, kwin
Tags: #kwin
Maniphest Tasks: T11459, T11098
Differential Revision: https://phabricator.kde.org/D23485
Summary:
Get the physical size directly from the always available output device
interface instead of saving an additional copy in the abstract wayland
output class.
There is some ambiguity with orientation and naming that needs to be
cleaned up when output orientation is reworked.
Test Plan: Nested Wayland, Drm, virtual backends tested.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23496
Summary:
Get the pixel size directly from the always available output device
interface instead of saving an additional copy in the backends.
Test Plan: Nested Wayland, Drm, virtual backends tested.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23495
Summary:
There is no point in using quint32 and casting back and forth in numerous places.
Fix a bunch of compiler warnings that we implicitly cast between signed and unsigned.
This makes things consistent with what we get from libinput.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: zzag, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23086
Summary:
So far we were following a bit unique and rare doxygen comment style:
/**
* Contents of the comment.
**/
Doxygen comments with this style look balanced and neat, but many people
that contribute to KWin don't follow this style. Instead, they prefer
more traditional doxygen comment style, i.e.
/**
* Contents of the comment.
*/
Reviewing such changes has been a bit frustrating for me (so selfish!)
and for other contributors.
This change switches doxygen comment style in KWin to a more traditional
style. The main reason for doing this is to make code review process easier
for new contributors as well us.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22812
Summary:
Currently code base of kwin can be viewed as two pieces. One is very
ancient, and the other one is more modern, which uses new C++ features.
The main problem with the ancient code is that it was written before
C++11 era. So, no override or final keywords, lambdas, etc.
Quite recently, KDE compiler settings were changed to show a warning if
a virtual method has missing override keyword. As you might have already
guessed, this fired back at us because of that ancient code. We had
about 500 new compiler warnings.
A "solution" was proposed to that problem - disable -Wno-suggest-override
and the other similar warning for clang. It's hard to call a solution
because those warnings are disabled not only for the old code, but also
for new. This is not what we want!
The main argument for not actually fixing the problem was that git
history will be screwed as well because of human factor. While good git
history is a very important thing, we should not go crazy about it and
block every change that somehow alters git history. git blame allows to
specify starting revision for a reason.
The other argument (human factor) can be easily solved by using tools
such as clang-tidy. clang-tidy is a clang-based linter for C++. It can
be used for various things, e.g. fixing coding style(e.g. add missing
braces to if statements, readability-braces-around-statements check),
or in our case add missing override keywords.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, apol, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22371
Summary:
Position and most importantly scaling will likely be the same on the next run,
This saves a flicker round at startup when scaling is different of 1 initialising the view at 1 then jumping at whatever the user requested.
Test Plan: Restarted my system several times
Reviewers: #kwin, #plasma, romangg
Reviewed By: #kwin, #plasma, romangg
Subscribers: davidedmundson, zzag, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22292
Summary:
The new class is responsible for parsing EDID blobs. It has pretty
straightforward API: you hand blob data to the constructor and after
that you're ready to query parsed data, e.g. physical size, etc.
The main reason to extract EDID parsing code into a class is to clean up
drm_output.cpp a bit.
Test Plan: Compiles, the DRM platform still works.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22211
Summary:
The color correction manager doesn't make any specific assumptions about
underlying platform, e.g. whether it's x11, etc. The platform just
has to be capable of setting gamma ramps. Given that, there are no any
significant technical blockers for making this feature work on x.
Reviewers: #kwin, davidedmundson, romangg
Reviewed By: #kwin, davidedmundson, romangg
Subscribers: romangg, neobrain, GB_2, filipf, davidedmundson, ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D21345
Summary:
Represent outputs in the X11 session via AbstractOutput. For that we
move all Wayland specific parts of AbstractOutput into a new subclass
AbstractWaylandOutput and let the outputs of our Wayland backends inherit
from there.
This should allow us to get rid of the Screens class later on.
Test Plan: Manually in X session.
Reviewers: #kwin, zzag, davidedmundson
Reviewed By: #kwin, zzag, davidedmundson
Subscribers: ngraham, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19208
Summary:
Returning a reference to a value on the stack is broken.
This caused kwin_wayland to crash in openQA with a nullptr deref.
BUG: 407199
Test Plan: Only build tested.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D21085
Summary:
Every time a display gets connected/disconnected, every output will be
reinitialized. We don't really need to reset the scaling to 1 every time
we don't know, especially since the setting has been set voluntarily.
Test Plan: When I disconnect the external display, my laptop doesn't fallback to scale=1.
Reviewers: #plasma, apol
Reviewed By: apol
Subscribers: davidedmundson, ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D20521
Summary:
This is the initial implementation of a DRM backend based on the EGLDevice,
EGLOutput, and EGLStream extensions, supporting NVIDIA graphics hardware using
their proprietary driver. The new backend will be used if the environment
variable KWIN_DRM_USE_EGL_STREAMS is set. On initialization, it will attempt to
create an EGLDevice based on the DRM device currently in use and create
EGLOutputs and EGLStreams for any attached displays. These are used to control
presentation of the final composited frame. Additionally, it will register the
wl_eglstream_controller Wayland interface so that native EGL windows created by
clients can be attached to an EGLStream allowing buffer contents to be shared
with the compositor as a GL texture.
At this time there are two known bugs in the NVIDIA driver's EGL implementation
affecting desktop functionality. The first can result in tooltip windows drawn
by plasmashell to contain incorrect contents. The second prevents KWayland from
being able to query the format of EGLStream-backed buffers which interferes
with the blur effect. Fixes for both of these are currently in development and
should appear in an upcoming NVIDIA driver release.
Additionally, hardware cursors are currently not supported with this backend.
Enabling them causes the desktop to intermittently hang for several seconds.
This is also likely a bug in the NVIDIA DRM-KMS implementation but the root
cause is still under investigation.
Test Plan:
On a system with an NVIDIA graphics card running a recent release of their
proprietary driver
* Ensure the nvidia_drm kernel module is loaded with the option "modeset=1"
("# cat /sys/module/nvidia_drm/parameters/modeset" should print "Y")
* Ensure EGL external platform support is installed
https://github.com/NVIDIA/eglexternalplatform
* Ensure KWin was build with the CMake option
KWIN_BUILD_EGL_STREAM_BACKEND=ON (this is the default)
* Start a plasma wayland session with the environment variable
KWIN_DRM_USE_EGL_STREAMS set
* Ensure output from KWin OpenGL initialization indicates the NVIDIA EGL
driver is in use (as opposed to Mesa / llvmpipe).
* Desktop should be fully functional and perform smoothly.
Reviewers: #kwin, romangg, davidedmundson
Reviewed By: #kwin, romangg, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18570
Summary:
Currently there is no any good reason for keeping ScopedDrmPointer;
providing our own deleter for QScopedPointer would make more sense.
Given that we already have type that acts as a scoped pointer for drm
objects we can improve it a bit and make simpler, e.g.
DrmScopedPointer<drmModeConnector> connector;
is much simpler than
ScopedDrmPointer<_drmModeConnector, &drmModeFreeConnector> connector;
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: apol, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19905
Summary:
If hardware cursor support is not available when using the drm backend for
Wayland compositing, the software cursor texture will not be updated when the
cursor image changes, and it will still be drawn when no cursor image is set
(such as when running a full-screen game). Furthermore, the drmModeSetCursor
and drmModeMoveCursor functions will still be unnecessarily called when the
cursor is moved or hidden.
To correct this, SceneOpenGL should connect Platform::cursorChanged as opposed
to Cursor::cursorChanged to its texture update function, as only the former
will be emitted when the cursor is updated and the compositor should check if
the cursor is hidden and the software cursor image is not null before rendering
it. DrmBackend::moveCursor and DrmBackend::hideCursor should also return
immediately if using a software cursor.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18376
Summary: Like we do on inverted mode
Test Plan: Not much, because we don't support portrait mode on intel hardware just yet. I can see the cursor properly rotated before drm tells us to fall back to the previous configuration.
Reviewers: #kwin, #plasma, graesslin
Reviewed By: #kwin, #plasma, graesslin
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19710
Summary:
On Wayland we cannot switch from OpenGL to QPainter compositor as this
would break any running OpenGL application. KWin registers it's
EGLDisplay to Wayland and without OpenGL this doesn't make sense any
more. We are not able to render OpenGL buffers in the QPainter
compositor.
While it's theoretically possible to switch from QPainter to OpenGL it
doesn't make any sense for the same reason. Any running OpenGL
application would be using llvmpipe and could not be switched to proper
OpenGL.
This change stores the selected compositing type in Platform and the
implementations can use it to restrict the supported compositors. On X11
we don't need this, all other Platforms implement the restriction. Thus
it's no longer possible to switch the backends at runtime.
Test Plan:
Adjusted tests run, no runtime test as gui doesn't support
switching to QPainter anyway.
Reviewers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19084
Summary:
We have a mix of different doxygen comment styles, e.g.
/*!
Foo bar.
*/
/**
* Foo bar.
*/
/** Foo bar.
*/
/**
* Foo bar.
*/
/**
* Foo bar.
**/
To make the code more consistent, this change updates the style of all
doxygen comments to the last one.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18683
Summary:
This brings KWin a step closer to be run from build dir without having
to install at all. The integration tests are adjusted so that the
virtual platform is still found which makes the code be closer to what
is used in normal kwin_wayland.
Test Plan: ctest passes, manually verified correct plugin is loaded
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D17388
Summary:
The current refresh rate is stored in OutputInterface. Move the getter
therefore in the AbstractOutput class.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16793
Summary: Removes unneeded includes and reorders the code in a sensible way.
Reviewers: #kwin
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16792
Summary:
Set the mode in AbstractOutput and call into the plugin
for final change on hardware.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Maniphest Tasks: T10016
Differential Revision: https://phabricator.kde.org/D16786
Summary:
Wayland output is on protocol level and not dependent on the hardware
platform. Next steps are to do the same for output device and then let
the virtual output call into these initializing functions as well.
Test Plan: Manually and auto test.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16783
Summary:
With the new Output class we can set the gamma directly here. This is also
a stepping stone to adjust individual output gamma adjustment later on.
This means any future backend, which aims to support the color correction
frontend needs to use the Output class.
Test Plan: Night Color test still passes.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11803
Summary:
Lift high-level properties into new Screens child class for platform plugins
using the Output class.
Directly make DrmScreens a child class of OutputScreens.
Test Plan: Manually and auto tests with 94%.
Reviewers: #kwin
Differential Revision: https://phabricator.kde.org/D11782
Summary:
In order to separate high-level properties of individual outputs from
hardware-specific ones and access these, introduce a new generic class Output.
Also make the DrmOutput class directly a child class of this generic class.
The long-term goal is to get rid of the Screens global object on Wayland and
instead directly work with Output objects on compositing level.
This should enable us long-term to do direct scanout to hardware planes, what
I predict needs this generic output representation at one point.
Test Plan: Manually.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11781
Summary:
The kwin code was written to treat scale as non integers, we just need
to switch to the relevant float version of methods.
Test Plan:
Used kscreen-doctor to change this
Konsole resized as appropriate
Plasmashell was all broken, but that's expected until QScreen::size is based on the
xdg-output virtual size
Reviewers: #kwin, mart, graesslin, romangg
Reviewed By: #kwin, mart, graesslin
Subscribers: romangg, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13616
Summary:
To do so leaves a dangling pointer on our pageFlipHandler
BUG: 396272
Test Plan: Wobbled a window whilst plugging a monitor in and out
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14210
Summary:
We pass the buffer scale of the cursor through QImage::devicePixelRatio.
When copying the cursor with QPainter use Qt's in-built functionality to
handle resizing the cursor pixmap as necessary to match the screen.
As we're now resizing the cursor, the hotspot needs translating from
logical to device co-ordinates.
Test Plan: Used with associated patches
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13605
Summary:
The drm platform has a special handling for touch events while the
screen is in dpms. All touch events are filtered out, but a double
tap wakes up the screen.
Due to the filtering out of the events the idle timers were not reset.
So if you only double tapped, the screen turned on, but not off again.
This change updates the timestamp after double tap, so that the idle
timers are restarted. All other events are still filtered out, to not
have "fake" events (e.g. smart phone in pocket) wake up the device.
BUG: 392754
FIXED-IN: 5.12.6
Test Plan: only compile tested
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12668
Test Plan:
Very minimal expansion of unit tests which uses WaylandScreens
Wrote mini app to debug actual output of xdg-output for testing the DRM code
Main relevant user of this is xwayland > 1.20 which I don't have, so that
part remains untested
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: romangg, graesslin, bshah, kwin
Tags: #kwin
Maniphest Tasks: T8501
Differential Revision: https://phabricator.kde.org/D12243
Do not blindly select first EGL config from returned list, but choose the one that matches GBM surfaces, that will be created later.
GBM surfaces are created with GBM_FORMAT_XRGB8888 format, so choose the config that matches it.
With wrong format EglGbmBackend::resetOutput() will later fail with error EGL_BAD_MATCH.
Test Plan: Compile, run startplasmacompositor. Verify that OpenGL compositing is used, either by kwin debug console, or by kwin support information.
Reviewers: graesslin, davidedmundson, #kwin, #plasma_on_wayland, bshah
Reviewed By: davidedmundson
Subscribers: zzag, kwin, #kwin
Tags: #kwin, #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D11758
Summary:
Do not blindly select first EGL config from returned list, but choose the one that matches GBM surfaces, that will be created later.
GBM surfaces are created with GBM_FORMAT_XRGB8888 format, so choose the config that matches it.
With wrong format EglGbmBackend::resetOutput() will later fail with error EGL_BAD_MATCH.
Test Plan: Compile, run startplasmacompositor. Verify that OpenGL compositing is used, either by kwin debug console, or by kwin support information.
Reviewers: graesslin, davidedmundson, #kwin, #plasma_on_wayland, bshah
Reviewed By: davidedmundson
Subscribers: zzag, kwin, #kwin
Tags: #kwin, #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D11758
Summary:
Implements a KWayland protocol to pass GBM fd from KWin to KRfb and
addictions to relevant projects from both sides.
Note that this patch does not affect default behaviour of mentioned projects. It can be used
only with KWIN_REMOTE=1 in env from KWin side and with preferredFrameBufferPlugin=gbm in krfbrc from
KRfb side. In all other aspects app behaviour remains unchanged.
Test Plan: Launched KWin in Wayland mode, launched KRfb in it, launched KRDC on a laptop, connected in read-only mode, observed a correctly retrieved desktop with Krfb window
Reviewers: graesslin, davidedmundson, romangg, #kwin
Reviewed By: davidedmundson, romangg, #kwin
Subscribers: kossebau, jgrulich, romangg, ngraham, alexeymin, aacid, kwin, #kwin, davidedmundson, plasma-devel
Tags: #plasma_on_wayland, #kwin
Maniphest Tasks: T5653, T7785
Differential Revision: https://phabricator.kde.org/D1230
Summary:
some drivers, like Mali have EGL_KHR_platform_gbm
but not EGL_MESA_platform_gbm
Test Plan: pending a test on rock64 board
Reviewers: #kwin, #plasma, davidedmundson, graesslin
Reviewed By: #kwin, #plasma, graesslin
Subscribers: graesslin, garg, davidedmundson, plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10346
Summary:
This change finds the screen for a touch screen device based on:
* number available screens
* output name defined on the touch screen device
* internal screen
* and physical size
The id of the screen is stored in the Device allowing to adjust the
touch points accordingly. This means instead of transferring to the
combined display size the touch points are transferred into the output
space and the position of the output is added. Thus in a multi screen
system the touch points are properly mapped to the output.
Furthermore the screen orientation is passed to the Device and a
calibration matrix is set accordingly. Thus a transformed screen has the
touch screen transformed accordingly.
Please note that this only affects libinput on Wayland and not on X11!
The x11 standalone platform needs to gain similar code.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8748
With Wayland KWin needs to provide certain services, which were provided
before that by the Xserver. One of these is gamma correction, which includes
the - by many people beloved - functionality to reduce the blue light at
nighttime. This patch provides the KWin part of that. It is self contained,
but in the end will work in tandem with a lib in Plasma Workspace and a KCM
in Plasma Desktop, which can be used to configure Night Color.
* Three modi:
** Automatic: The location and sun timings are determined automatically
(location data updates will be provided by the workspace)
** Location: The sun timings are determined by fixed location data
** Timings: The sun timings are set manually by the user
* Color temperature value changes are smoothly applied:
** Configuration changes, which lead to other current values are changed
in a quick way over a few seconds
** Changes on sunrise and sunset are applied slowly over the course of few
minutes till several hours depending on the configuration
* The current color value is set immediately at startup or after suspend
phases and VT switches. There is no flickering.
* All configuration is done via a DBus interface, changed values are tested
on correctness and applied atomically
* Self contained mechanism, speaks directly to the hardware by setting the
gamma ramps on the CRTC
* Currently working on DRM backend, extensible to other platform backends in
the future
* The code is written in a way to make the classes later easily extendable to
also provide normal color correction, as it's currently done by KGamma on X
Test Plan:
Manually with the workspace parts and added integration tests in KWin using
the virtual backend.
BUG:371494
Reviewers: #kwin, graesslin
Subscribers: kwin, plasma-devel, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5928
Summary:
The addition of the test infrastructure is motivated by the regressions
caused by adding mode switching and transformation support.
A contributing factor to these regression is the fact that the DRM
platform does not have any tests. It is difficult to test this code as
it needs to work with hardware, thus we cannot use the real DRM library.
Instead we need to use mocking.
This change sets up some first basic tests with the help of a mockDrm
library. In order to better test the code as units the Drm classes are
slightly refactored. Most importantly the dependency to DrmBackend is
removed wherever possible and replaced by a simple int fd which is mostly
the only element used by the classes.
This first test introduces basic testing of a DrmObject. It is intended
to extend this to at least also test DrmPlane as a central piece of our
Drm platform plugin. This will also extend the tests of DrmObject.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8776
Summary:
We need to keep the DrmOutput object to still have the
WaylandOutputDevice.
Screens currently start off enabled as before.
In order to keep KWin to have a correct index based list of screens we
need to store a second vector of currently enabled outputs for the
screens interface.
Test Plan:
Had dual screens.
Disabled/Enabled each one through the kscreen KCM
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: ngraham, luebking, broulik, graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8796
Summary:
This is a tiny refactor so that DrmOutput can have WaylandOutput
dynamically
deleted and recreated at runtime as we disable outptuts.
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8794
Summary:
con->setOutput and crtc->setOutput is called in Output::~Output so this
is doing it twice redundantly.
More importantly Output::~Output calls crtc->blank(), which means we
need a valid CRTC object there.
Test Plan: Compiles
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: bshah, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8779
Summary:
The AMS code accesses elements in a vector which might not be valid. This
change refactors the code to be more robust, especially the DrmPlane,
which started to crash after adding transformation support.
BUG: 386490
Reviewers: #kwin, #plasma, fvogt, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8752
Summary:
This change introduces an OrientationSensor class which wraps a
QOrientationSensor. The OrientationSensor is hold by Screens and gets
enabled if Screens knows about an internal (e.g. LVDS) display which
supports rotation. In addition the OrientationSensor holds an KSni to
enable/disable the automatic rotation support.
The drm platform plugin is adjusted to make use of the OrientationSensor.
The API is defined in a way that this can also be implemented on other
platforms supporting rotation. Most important are hwcomposer and X11
standalone. The latter should be straight forward as rotation is provided
through XRandR. The former needs addition for rotation support first.
Test Plan: Rotated my Yoga 12
Reviewers: #kwin, #plasma, sebas
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8699
Summary:
The idea behind getting the supported transformations is to tell KScreen
which transformations are actually supported and thus not even allow the
user select a setting which is not supported.
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8645
Summary:
While KWin gained support for changing modes it did not yet forward it
to the Wayland OutputInterface. This change implements this missing todo
by finding the matching mode and marking it as current.
Test Plan: Run kinfocenter to verify the current mode is properly set.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8578
Summary: Mostly so DRM can report if it has AMS or not
Test Plan:
Ran on my DRM setup, printed debug.
Spawned nested compositor, printed debug on that
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8702
Summary:
This change fixes the hotspot calculation by introducing a dedicated
matrix to map the hotspot.
To better test the hotspot a small test application is added. The app
renders a red point at the cursor position and uses a cross for cursor
with the hotspot position being transparent. So if KWin renders the
cursor at the correct position a red point is visible in the center of
the cross. The test app supports several cursor hotspot positions:
* center (default)
* top left
* top right
* bottom right
* bottom left
To switch between the variants press the space key.
Test Plan:
Rotated screen, used test app to verify the hotspot is
correct. Also scaled display, still correct
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8668
Summary:
So far all outputs shared the same dumb buffer for the cursor image.
This doesn't work any more when screen rotation is enabled. For rotated
screens the cursor image per output is different. On some it might be
rotated, on some not.
To solve this problem the dumb buffers are moved from the DrmBackend to
the DrmOutput. The DrmOutput now creates the cursor images itself and
can rotate them if needed. Thus we get nicely transformed cursors.
Test Plan: Rotated screens, moved cursor around, image properly rotated
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8664
Summary:
This change refactors the way how the cursor position on a screen is
calculated. It is changed to a matrix multiplication with the
adjustments for the rotated screen just being additional steps added to
the matrix.
With this calculation I got correct positions for all variants of
scaled, rotated and differently positioned outputs.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8627
Summary:
When KWin successfully presents a new mode, it stores the current state
as the last working mode. If a new modeset is requested and the atomic
test fails, all is undone and reverted to this last knowing mode.
Currently included are:
* the mode
* global position
* transformation
This is only done on a modeset not when going to DPMS.
Test Plan:
Selected the not working vertical rotation and nothing bad
happened.
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8602
Summary:
This change hooks up the drm plane rotate with the rotation requests
from KScreen. Our requests support more than what KScreen exposes in the
UI, that is all the flipped variants. I do not really understand what
the flip means, so this is not implemented yet.
Furthermore this only implements the visual rotation and not the input
rotation. This means mouse movement and touch input is currently broken
on a rotated screen.
Please note that the hardware I used seems to not support the vertical
rotation. I'm not sure whether my code works. On my system it just
results in atomic commit errors and we need to go back to a previous
working state. This is not yet implemented. I need to test the vertical
rotation on my notebook, which should (in theory) support it.
Reviewers: #kwin, #plasma, subdiff, sebas
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8594
Summary:
A preparation step to support rotation of outputs. The idea is to rotate
using DRM directly and not add it to the compositors. With this change
and a small hack to try it, I was able to rotate the screen.
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8582
Summary:
This change hooks up the bits for changing the mode when a request to
change mode from kscreen is received. This includes:
* setting new mode in DrmOutput
* creating new buffers in SceneQPainter backend
* creating new GbmSurface in SceneOpenGL backend
Room for improvement:
* detect whether the new mode works and go back to old one if it fails
Test Plan:
Started both a QPainter/OpenGL session. Used kcmshell5 kscreen
to modify the resolution. Saw that it got applied, maximized a window to
verify it's correct. Changed back to original resolution. Verified it looked
good by maximizing a window.
Reviewers: #kwin, #plasma, subdiff, sebas
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8398
Summary:
We want to translate by the monitor position, so that needs to be
the negative of the position.
But Kwin/KScreen treats 0 as the top of all monitors. GL treats 0 as
bottom, so that all needs inverting.
Hence this should be a positive y value for the viewport.
BUG: 386099
BUG: 385655
Test Plan:
Had two monitors
Side by side was - fine
Stacked vertically - still fine
Modded X code to extend in y instead of x.
3 monitors worked fine.
Nested wayland only seems to support one screen?
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8479
Summary:
Allows to share the implementation in a better way and is a requirement
to get the Screen implementation in the QPA plugin to be based on
KWin::Screens instead of KWayland::Output.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8344
Summary:
So far KWin does not know which Compositors the platform actually
supports. This results in KWin happily trying to use the OpenGL
compositor on fbdev or the QPainter compositor on hwcomposer although
that is obviously going to fail as the platform doesn't support this.
By adding a pure virtual method all Platforms can define what they
support. In a later step the Compositor can use this to create an
appropriate scene and also perform proper fallback handling in case the
scene creation fails.
Test Plan: Compiles
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8316
Summary:
In 47343fb we made GBM buffer shared.
What we wanted to do was:
Unbox the shared_pointer<GBMSurface> to give us a GBMSurface* object
Call the gbm_surface*() on that operator
Then cast that to a void* for eglCreatePlatformWindowSurfaceEXT
What we did:
Cast the std::shared_ptr<GBMSurface> to a gbm_surface* then cast that
to void*.
This is just a garbage value and it crashes in Mesa when we do our first
paint.
I've replaced that with an explicit method then we can use shared_ptr's
-> operator rather than get() which does the right thing in a readable
way.
Test Plan:
It crashed after rebasing to master (for Aleix too)
No longer crashes
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8251
Summary:
In 47343fb we made GBM buffer shared.
What we wanted to do was:
Unbox the shared_pointer<GBMSurface> to give us a GBMSurface* object
Call the gbm_surface*() on that operator
Then cast that to a void* for eglCreatePlatformWindowSurfaceEXT
What we did:
Cast the std::shared_ptr<GBMSurface> to a gbm_surface* then cast that
to void*.
This is just a garbage value and it crashes in Mesa when we do our first
paint.
I've replaced that with an explicit method then we can use shared_ptr's
-> operator rather than get() which does the right thing in a readable
way.
Test Plan:
It crashed after rebasing to master (for Aleix too)
No longer crashes
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8251
Summary:
The gbm_surface is owned by the EglGbmBackend, but it's not the only one
using it. The DrmSurfaceBuffer is also using it and needs it to destroy
the gbm_bo. Now this can become a problem in the following situation:
* a page flip is still pending
* the EglGbmBackend destroys the gbm_surface
-> when the page flip happens the DrmSurfaceBuffer will try to destroy
the gbm_bo and crash as the gbm_surface is no longer valid. This
situation can happen when switching screens or when switching compositing
backend (OpenGL 2 -> OpenGL 3).
To address this problem a class GbmSurface is added which wrapps the
gbm_surface pointer. The EglGbmBackend creates and holds a shared pointer
to the GbmSurface and passes that one to the DrmSurfaceBuffer. So when
cleaning up the gbm_surface only the shared pointer is reset and in case
the DrmSurfaceBuffer still needs it, it can access it without problems.
BUG: 385372
FIXED-IN: 5.11.0
Test Plan: Not yet
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8152
Summary:
Unfortunately a rather large change which required more refactoring than
initially expected. The main problem was that some parts needed to go
into platformsupport so that the platform plugins can link them. Due to
the rather monolithic nature of scene_opengl.h a few changes were
required:
* SceneOpenGL::Texture -> SceneOpenGLTexture
* SceneOpenGL::TexturePrivate -> SceneOpenGLTexturePrivate
* texture based code into dedicated files
* SwapProfiler code into dedicated files
* SwapProfiler only used in x11 variants
* Safety checks for OpenGL scene moved into the new plugin
* signal declared in SceneOpenGL moved to Scene, so that we don't need
to include SceneOpenGL in composite
Test Plan: Nested OpenGL compositor works
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7740
Summary:
After changing the output configuration, the client expects that it is informed
whether or not a new configuration has been applied (or failed). This was ommitted
so far, meaning that clients wouldn't know what happened in kwin.
Since we don't track if a setting failed yet, send the applied() signal regardless.
CCBUG:384733
Test Plan: Verified that the signal arrived in libkscreen after changing scale of an output
Reviewers: graesslin, davidedmundson
Reviewed By: davidedmundson
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7910
Summary:
In the DRM plugin the cursor is currently is drawn at the native size
given.
Therefore we don't want to scale the icon offset as that leads to it
being drawn every so slightly off-sync.
BUG: 384769
Fixed-in: 5.11.0
Test Plan:
Kate now selects lines based on the middle of the cursor, not the top left.
I'd previously gotten so used to it, I hadn't realised it was actually a bug :/
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7868
