Use input device specific apis to change the position of the cursor. The
main reason to do so is to break the assumption that Cursor position is
the same as pointer position, which I would like to rely on later to
merge tablet and pointer cursors.
The test waits longer than needed to determine whether effects stopped
playing animations
Before
Executed in 22.41 secs fish external
usr time 997.42 millis 722.00 micros 996.70 millis
sys time 744.81 millis 79.00 micros 744.73 millis
After
Executed in 9.71 secs fish external
usr time 894.42 millis 1.03 millis 893.38 millis
sys time 689.80 millis 0.11 millis 689.69 millis
We use the PMF syntax so the isValid() check is unnecessary as the
compiler will notify about wrong signal at compile time. It makes
writing autotests feel less boilerplaty.
This enables again the crossfade between the old window picture and the new one in the maximize and morphingpopup effects.
It does that with the OffScreenEffect redirect() feature.
BUG:439689
BUG:435423
Things such as Output, InputDevice and so on are made to be
multi-purpose. In order to make this separation more clear, this change
moves that code in the core directory. Some things still link to the
abstraction level above (kwin), they can be tackled in future refactors.
Ideally code in core/ should depend either on other code in core/ or
system libs.
With fractional scaling integer based logical geometry may not match
device pixels. Once we have a floating point base we can fix that. This
also is
important for our X11 scale override, with a scale of 2 we could
get logical sizes with halves.
We already have all input being floating point, this doubles down on it
for all remaining geometry.
- Outputs remain integer to ensure that any screen on the right remains
aligned.
- Placement also remains integer based for now.
- Repainting is untouched as we always expand outwards
(QRectF::toAdjustedRect().
- Decoration is untouched for now
- Rules are integer in the config, but floating in the adjusting/API
This should also be fine.
At some point we'll add a method to snap to the device pixel
grid. Effectively `round(value * dpr) / dpr` though right now things
mostly work.
This also gets rid of a lot of hacks for QRect right and bottom which
are very
confusing.
Parts to watch out in the port are:
QRectF::contains now includes edges
QRectF::right and bottom are now sane so previous hacks have to be
removed
QRectF(QPoint, QPoint) behaves differently for the same reason
QRectF::center too
In test results some adjusted values which are the result of
QRect.center because using QRectF's center should behave the same to the
user.
The .clang-format file is based on the one in ECM except the following
style options:
- AlwaysBreakBeforeMultilineStrings
- BinPackArguments
- BinPackParameters
- ColumnLimit
- BreakBeforeBraces
- KeepEmptyLinesAtTheStartOfBlocks
[5/6] Make autotests create fake input devices
Migrate all input simulation functions from kwinApp()->platform()->...
to the their counter part in the Test namespace.
It's not practical, regular users don't care about window geometry. One
could argue that it can be useful for creating window rules, but window
rules kcm pulls relevant properties from kwin.
If needed, one can reimplement this feature as a QtQuick script that creates
an overlay window positioned above the window that is being interactively
moved or resized.
Currently, if a window switches between SSD and CSD, it is possible to
encounter a "corrupted" state where the server-side decoration is wrapped
around the window while it still has the client-side decoration.
The xdg-decoration protocol fixes this problem by saying that decoration
updates are bound to xdg_surface configure events.
At the moment, kwin sort of applies decoration updates immediately. With
this change, decoration updates will be done according to the spec.
If the compositor wants to create a decoration, it will send a configure
event and apply the decoration when the configure event is acked by the
client. In order to send the configure event with a good window geometry
size, kwin will create the decoration to query the border size but not
assign it to the client yet. As is, KDecoration api doesn't make
querying the border size ahead of time easy. The decoration plugin can
assign arbitrary border sizes to windows as it pleases it. We could change
that, but it effectively means starting KDecoration3 and setting existing
window deco ecosystem around kwin on fire the second time, that's off the
table.
If the compositor wants to remove the decoration, it will send a
configure event. When the configure event is acked and the surface is
committed, the window decoration will be destroyed.
Sync'ing decoration updates to configure events ensures that we cannot
end up with having both client-side and server-side decoration. It also
helps us to fix a bunch of geometry related issues caused by creating
and destroying the decoration without any surface buffer attached yet.
BUG: 445259
It's more common to see the parent object being the last argument in Qt
and this way you won't need to specify nullptr parent explicitly if the
xdg-popup or the xdg-toplevel surface doesn't need to be configured
implicitly, which makes tests slightly easier to read.
The main idea behind the render backend is to decouple low level bits
from scenes. The end goal is to make the render backend provide render
targets where the scene can render.
Design-wise, such a split is more flexible than the current state, for
example we could start experimenting with using qtquick (assuming that
the legacy scene is properly encapsulated) or creating multiple scenes,
for example for each output layer, etc.
So far, the RenderBackend class only contains one getter, more stuff will
be moved from the Scene as it makes sense.
The main motivation behind this change is to prepare kwin for importing
kwayland-server code in libkwin.
As is, builtin effects are linked with libkwin. Some builtin effects
have wayland specific code. If we move wayland stuff in libkwin, there's
going to be a circular dependency between kwin4_effect_builtins and
libkwin targets.
This change intends to break that dependency by linking builtin effects
to kwin executable.
The main issue with that is that EffectLoader would need to discover the
effects indirectly. QStaticPlugin is used for that purpose.
Besides breaking the cyclic dependency, it makes builtin effects use the
same plugin infrastructure in libkwineffects that external effects use.
Metadata in src/effects/effect_builtins.cpp was converted in a list of
python dictionaries, which was fed to a python script that generated
main.cpp and metadata.json files.
With a "Surface" type in kwin, KWayland::Client::Surface without fully
specified namespace will conflict with kwin's Surface type.
In some way, it also improves readability as it's clear where Surface
comes from.
toplevel.h is included in many places. Changing virtualdesktops.h may
trigger rebuild of all kwin.
With this change, only cpp files that use virtualdesktops.h will need to
be recompiled.
With the ongoing scene redesign, it needs to be rewritten. However,
given that it is not used widely based on support information from
various bug reports and our available man power is sparse, the most
reasonable thing is to drop the effect, unfortunately.
This is to improve code readability and make it easier to differentiate
between methods that are used during interactive move-resize and normal
move-resize methods in the future.
When debugging modifier_only_shortcut_test in _waylandonly mode I saw
that it was failing, among other things, because some aspects were not
initialised.
This changes every test we have to run the new
Test::initWaylandWorkspace() that calls waylandServer()->initWorkspace()
but also makes sure that WaylandServer::initialized is emitted before we
proceed.
Summary:
QScriptEngine is deprecated for years and suffers bitrot.
Plasma hit one super major bug with it in 5.11.0 and has now ported
away.
Main porting notes:
- creating low level functions no longer exists
The old global functions are exposed on the ScriptedEffect instance
and then the QJSValue wrappers of the globalObject are modified to
trampoline the methods at a wrapper level.
- We can then use QJSEngine to automatically do argument error checking
rather than unmarshalling a QJSValue manually which significantly
reduces a lot of code.
- We can't make FPX2 a native type, so these are QJSValue args and
unboxed there.
Long term I want overloads for animate that take int/QSize/QPoint which
are native JS types, but that might be an API break.
Test Plan:
Hopefully comprehensive unit test which passes
Tested fade/fadeDesktop manually.
It's a very invasive change, so I expect some things will be broke
please help test any JS effects.
Reviewers: #kwin, mart, fvogt
Subscribers: fvogt, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14536
