Completing the task of replacing all NULL to nullptr in all the files in
libkwineffects folder.
(also substituting some "0" used as nullptr with nullptr)
REVIEW: 114823
Client used to have dedicated methods for different icon sizes instead
of combining all pixmaps into one QIcon. This resulted in various parts
of KWin having different access to the icons:
* effects only got one pixmap of size 32x32
* decorations only got the 16x16 and 32x32 pixmaps combined into a QIcon
* tabbox could request all icon sizes, but only as pixmap
Now all sizes are available in one QIcon allowing to easily access the
best fitting icon in a given UI.
Instead of looping over every quad for every grid cell and checking
for possible intersections, loop over the quads once and compute
the top left corner of the first intersecting grid cell. Then loop over
all the intersecting cells from that point and create the sub quads.
This new algorithm also preserves the order of the quads in the
original list.
Port from kFatal to qFatal - kFatal is still in kde4support,
but lacking debug area support arguably isn't that big a
deal since fatals can't be turned off anyway.
CCMAIL:mgraesslin@kde.org
* "" needs to be wrapped in QStringLiteral
* QString::fromUtf8 needed for const char* and QByteArray
* QByteArray::constData() needed to get to the const char*
Cross fading with previous pixmap is achieved by referencing the old
window pixmap. WindowPaintData has a cross-fade-factor which interpolates
between 0.0 (completely old pixmap) to 1.0 (completely new pixmap).
If a cross fading factor is set and a previous pixmap is valid this one
is rendered on top of the current pixmap with opacity adjusted. This
results in a smoother fading.
To simplify the setup the AnimationEffect is extended and also takes care
about correctly (un)referencing the previous window pixmap. The maximize
effect is adjusted to make use of this new capabilities.
Unfortunately this setup has a huge problem with the case that the window
decoration gets smaller (e.g. from normal to maximized state). In this
situation it can happen that the old window is rendered with parts outside
the content resulting in video garbage being shown. To prevent this a set
of new WindowQuads is generated with normalized texture coordinates in
the safe area which contains real content.
For OpenGL2Window a PreviousContentLeaf is added which is only set up in
case the crass fading factor is set.
REVIEW: 110578
Unlike makeArrays() this function writes into a pre-allocated array,
and takes a matrix that's used to transform the texture coordinates.
This allows this function to handle coordinates for rectangular
textures correctly.
Note that unlike the previous commit, this doesn't fix texture coordinates
for rectangular textures. That case cannot be handled correctly without
knowing the dimensions of the texture.
With the removal of BoxSwitch all effects which want mouse events use the
fullscreen input window. The available functionality is too complex both
in EffectsHandler and in the Effects.
With this change only fullscreen input windows are supported and all
effects share the input window. This means there is at maximum one input
window. This simplifies the code in the Effects as they don't have to
keep track of the window they created any more. In EffectsHandler it
means that only one window needs to be created, destroyed and raised.
Also it means that we can properly react on screen size changes which had
been ignored in the past. Also quite some roundtrips to X are no longer
needed as we do not need to query the window geometry when creating the
input window.
REVIEW: 110156
This property can be used to check whether a window is currently visible
to the user, that is:
* not minimized
* on the current desktop
* on current activity
This is a common need for various effects.
REVIEW: 108341
Add an option to kcmcompositing in the 'Advanced' tab, to enable or
disable color correction. It is specified that it's experimental and it
needs Kolor Manager.
Before painting for a particular screen, ColorCorrection::setupForOutput
should be called.
A screen property is added for WindowPaintData.
In kwinglutils, The fragment shaders are intercepted before being
compiled and they get a couple of lines of code inserted in order to do
the color correction. This happens only when color correction is enabled, of
course.
For D-Bus communication with KolorServer, everything is async.
The implementation basically manages a set of color lookup tables for
different outputs and for different window regions. These are taken via
D-Bus. Each lookup table has around 700 KB.
This commit reintroduces the changes from the former merge with the
"color2" branch. In this form, it can be easily reverted.
REVIEW: 106141
This merge is incomplete and it does not include the review number of
the associated review request. It should have been pushed as a single
commit, because the merged commits were not intended to be published in
their form.
This reverts commit dcba90263069a221a5489b1915c5cf1ca39d090c, reversing
changes made to 50ae07525c7fde07794e7548c3d6e5a69cb1a89d.
Conflicts:
kwin/scene_opengl.cpp
kwin/scene_opengl.h
A decoration can provide the AbilityAnnounceAlphaChannel in addition to
AbilityUsesAlphaChannel. If this ability is provided the decoration can
enable/disable the use of the alpha channel through setAlphaEnabled().
The base idea behind this mechanism is to be able to tell the compositor
that currently alpha is not needed. An example is the maximized state in
which the decoration is fully opaque so that there is no need to use the
translucency code path which would render all windows behind the deco.
In addition also the blur effect honors this setting so that behind a
known opaque decoration no blurring is performed.
Oxygen is adjusted to disable translucency in maximized state and Aurorae
is adjusted to allow themes to enable/disable translucency. For Plastik
translucency and with that also blurring is disabled.
REVIEW: 106810
The CompositingType enum turns into flags and two new values are
introduced: OpenGL1Compositing and OpenGL2Compositing.
Those new values are or-ed to OpenGLCompositing so that a simple check
for the flag OpenGLCompositing works in case of one of those two new
values. To make the generic check for OpenGL compositing easier a method
in EffectsHandler is introduced to just check for this.
The scenes now return either OpenGL1Compositing or OpenGL2Compositing
depending on which Scene implementation. None returns OpenGLCompositing.
The implementation consists of a class in libkwineffects.
There are some slight modifications in the compositor. Regions for
different outputs are drawn at different times.
Currently only per output color correction is implemented. However, the
grounds are prepared for implementing per window color correction
easily.
The ColorCorrection class needs to communicate via D-Bus with a KDED
module, KolorServer, which is a part of KolorManager.
The only visible part for the user consists of a check box in the
advanced tab for the compositing KCM.
The actual correction is done by injecting a piece of code in the
fragment shader, code that does a 3D lookup into a special color lookup
texture. The data for these textures is obtained from KolorServer. All
D-Bus calls are async.
The public member variables for opacity, saturation and brightness
are removed in favor for getter and setters. The variables are
moved into a private class. Those are now qreal instead of double.
To make usage inside the effects easier a multiply method is added
which multiplies the current value with passed in factor and returns
the new value in a functional programming style.
This commit is the top-most of a patch series to refactor
ScreenPaintData and WindowPaintData. Other related commits are:
* 0811772
* ebdc7ec
* 2c8dd8d
* 7699726
* 68e0201
* 611cb09
REVIEW: 105141
BUG: 303314
FIXED-IN: 4.10
No effect has ever made use of contents opacity. Which means it
is not needed. Removing means faster effects as we used to
multiply the value (always 1.0) with the opacity in each frame
for each window.
A CMake variable is used to specify the name of the binary.
By default this is "kwin" but building for PA changes the
name to "kwinactive". The variable adjusts all names, e.g.
kwinnvidiahack becomes kwinactivenvidiahack.
The remaining usage of kwinrc in core and libs is replaced
by a cmakedefine for the configuration name and all data
installations are moved to the defined name. Dynamic loading
for scripts & co is adjusted for loading based on defined name.
This change allows the side-by-side installation of both kwin
for desktop and kwin for Plasma Desktop without the known
issues like conflicts in config files or missing build options
if kwin desktop is used for Plasma Active.
Likewise the KCMs are not adjusted as they are not intended to
be used for kwinactive.
REVIEW: 104299
BUG: 296084
FIXED-IN: 4.9.0
CCMAIL: active@kde.org
This patch adds a new function Toplevel::addLayerRepaint, that in contrast
to addWorkspaceRepaint does not invalidate every blur texture cache that
overlaps with that region. As the name suggests it rather invalidates the
to the window associated layer at that position. This is especially useful
in the case of move/resize events in combination with oxygen-transparent,
where the altered window is almost always the topmost window and the blur
texture cache of the windows underneath are unchanged.
For the case of fully opaque windows the behaviour of addLayerRepaint
and addWorkspaceRepaint should be same.
REVIEW: 103906
