Flickable by default allows swiping via click-and-drag or
scrolling with the mousewheel, which is weird when the content
is smaller than the available space.
Inhibit this behavior unless there's a need for scrolling.
The present windows effect can crash because a null (0) EffectScreen can
be passed to EffectsHandler::clientArea(), which is a bug.
Use EffectsHandler::virtualScreenGeometry() to get the bounding geometry
of all outputs.
BUG: 449508
The most recently activated window can be an overlay window that covers
all screens. If its center is not at an output with the fullscreen
window, then the fullscreen window's stack position won't be lowered. In
order to fix that, this change makes isActiveFullscreen() use
Toplevel::isOnOutput(), which uses geometry info, to check if both windows
are on the same output.
Since 4881dd63 replaced the double click timer for OffscreenQuickView
with a time check, we need to make sure the timestamp from
XInput/libinput is passed on to the actual QMouseEvent.
BUG: 448477
It can also be applied to client-side decorations. As long as the
compositor can ask the client to use some specific decoration mode, the
"no border" property can be set.
The implicit cast effectively rounds the value down, which make the
refresh rate be different from what KScreen actually wrote.
A better fix would be to use integers instead of floating point numbers
but that needs to happen in KScreen.
BUG: 448778
We'd trigger updatePrimary before Xwayland had reacted to the new output
so we wouldn't end up calling xcb_randr_set_output_primary() as
necessary.
BUG: 449099
A good portion of geometry handling code was written during the X11
times. The main difference between X11 and Wayland is that kwin doesn't
know where a window will exactly be after resize() or moveResize().
In order to handle Wayland specifics, every window has a bounding
geometry that is being manipulated by move(), resize(), and moveResize().
The frameGeometry(), the clientGeometry(), and the bufferGeometry() are
not manipulated by move(), resize(), and moveResize() directly. Almost
everything that manipulates geometry should use moveResizeGeometry().
This creates a problem though, since the clientGeometry() will be
updated only after the client provides a new buffer, kwin has absolutely
no idea what the client geometry for a given move resize geometry will
be.
Another side of the coin is that decoration updates are performed
asynchronously on wayland, meaning that you cannot use border properties
for anything related to geometry handling and you should avoid using
borderLeft(), borderTop(), borderRight(), and borderBottom() in general.
clientGeometry(), bufferGeometry(), and border*() are good only if you
want to forward an event or render something. They can't be used for
manipulating the geometry.
Unfortunately, AbstractClient::checkWorkspacePosition() needs both,
which is a bit of a problem. To add more oil to the fire, contents
of a decorated window can be snapped to a screen edge. This goes against
the nature of geometry updates on wayland, where we try to indicate
the bounds of the frame geometry and avoid using client and buffer
geometries.
In order to make geometry handling more correct on wayland, this change
removes the ability to snap the contents of a decorated window to a
screen edge. This allows to avoid using the client geometry in
checkWorkspacePosition(), which is a very important function that ensures
the window is inside the workspace.
There is nothing wrong with snapping the frame rather than its contents
and that's what kwin used to do. It was changed with the removal of
"Display borders on maximized windows" option, the relevant commit
didn't provide any reasoning behind the change.
The dpi of bouncing icon may not match the dpi of the screen, which
can make the linear filter sample texels from the opposite edge when
using the default wrap mode.
BUG: 448947
setWlSource will delete the X11Source while XToWlDrag did not
finish leading to potential crashes. Since it's only set when
creating a WlToXDrag, only remove it in this case.
We can also replace the virtual with a type check if we have to do
it anyways which also makes it clearer what is going on.
Detected using ASAN, declaration of the type is:
typedef union xcb_client_message_data_t {
uint8_t data8[20];
uint16_t data16[10];
uint32_t data32[5];
} xcb_client_message_data_t;
This will take care of showing user-visible error messages in case the
plugin does not exist.
While we get a log message from KCoreAddons with the change of 728b449891,
the user does not get prompted. Especially if the kcmshell/systemsettings
was not opened from the command line, spotting those error messages is more difficult.
Drag and drop objects slightly outlive wayland's DND concept as we have
to cancel the client and wait for a response.
This normally is fine, except in the case that the drag ended because
the sender quit.
Calling setWlSource on drag ends creates a matching pair with
Dnd::startDrag where we first set the source and has parralels with
clipboard.
Selection::handleSelectionRequest checks for the presence of a source.
I could not reproduce the original bug.
BUG: 448920
While in principle Mesa should already check if the buffer can be scanned
out, this may not always work. If we can't create a framebuffer object for
the buffer, fall back to compositing.
CCBUG: 448818
XCURSOR_SIZE * scale factor is not the way to compute the current cursor
size. For example, with breeze cursor theme at an output with a scale of
2 and cursor size 24, cursor images will have the effective size of (64, 64).
Also, the cursor can change when passing over user interface elements.
In order to accommodate for all of that, this change makes kwin reserve
enough of space for a cursor of size 256x256. "256" is a magical number
that comes from DRM. With many drivers, the maximum cursor size is 256.
BUG: 448840
If there's only one configure event that changes the position of the
window and it gets acknowledged but no buffer is attached yet, and a new
configure is sent, then the ConfigurePosition flag won't be inherited
by the new configure event and the window will be misplaced.
In order to fix that, this change makes XdgSurfaceClient pop the last
acknowledged configure event from the m_configureEvents list only when
it's about to be applied for sure.
BUG: 448856
Encoders are not really relevant for the test result, except that one of
the encoders for the connector must be compatible with the crtc.
The kernel usually exposes only a single encoder per connector for this
reason, but if a driver exposes multiple then that means KWin will do a
lot more tests than is necessary.
In order to prevent that from happening, do fewer syscalls and simplify
code, only check supported encoders once per connector.
When setting the default value for `ElectricCornerRatio` in the UI form
we also need to update the default indicator for this field.
*Default value for this setting is 25%*
| BEFORE | AFTER |
|---|---|
|||
BUG: 448886
FIXED-IN: 5.24
Historically, noBorder() was used for two things:
* as a substitute for AbstractClient::isDecorated()
* to determine whether the AbstractClient should have a decoration
With async decoration updates refactoring, a few things around
noBorder() have changed, which exposed an existing bug in the handling
of borderless maximized windows.
It's possible to have a case where an initially maximized window makes
an xdg_toplevel.set_maximized request before the initial commit, but
creates the decoration object after the initial commit.
Since XdgToplevelClient::userCanSetNoBorder() would return false when
maximize() is called in XdgToplevelClient::initialize(), m_userNoBorder
won't be updated and therefore the window can end up having a server
side decoration.
Previously, it wasn't the case because kwin would do nothing if the
decoration is installed and its preferred mode changes after the initial
commit but before the surface is mapped. With async decoration fixes,
kwin would react as expected, which unfortunately has exposed the bug.
The root cause of the problem is the fact that noBorder() is overloaded,
which makes it error-prone.
This patch changes how the noBorder property is treated. Now, it only
indicates whether the compositor wants the window to have no borders. If
noBorder() is true, it means that the compositor doesn't want the window
to have a server-side decoration; on the other hand, if noBorder() is
false, it doesn't imply that the window should have a decoration.
BUG: 448740
X11Client can grab pointer when starting interactive move or resize so
all pointer events go to it and kwin can update the move resize geometry
based on the current interactive move-resize mode.
However, on Wayland, X11Client::motionNotifyEvent() is disabled and
pointer events go through a code path that requires no X11 pointer grab.
