Summary:
Effects::checkInputWindowEvent(QWheelEvent *e) existed but it was not
hooked up to anything and would never be called.
This patch adds the relevant handling in the wayland filter, X filter so
the existing method gets called.
EffectQuickView is updated to handle wheel events.
Test Plan:
Used a ListView via an EffectQuickView in an effect.
I can now scroll with the mouse.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D25292
Summary:
Compositing in X11 was done time shifted, meaning that we paint first, then
wait one vblank interval length and present on prepareRenderingFrame the
previous paint result. This is supposed to make sure we don't miss the vblank
and in case of block till retrace be able to continue issuing commands and
only shortly before next vblank present.
This is counter-intuitiv, not how we do it on Wayland or even on MESA with X.
The reason seems to be that the GLX backend was in the beginning written
against Nvidia proprietary driver which needed this but nowadays even this
driver defaults to non-blocking behavior on buffer swap.
Therefore remove this legacy anomaly fully and directly present after paint.
We then wait one refresh cycle and in the future can optimize this by delaying
the paint and present till shortly before vsync.
Test Plan: kwin_x11 tested on i915 and Nvidia proprietary driver.
Reviewers: #kwin
Subscribers: zzag, alexeymin, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D23514
Summary:
Selecting not to vsync does not make sense for an X11 compositor. In the end
we want clients to be able to present async if they want to but the compositor
is supposed to send swaps with vsync to the XServer in order to not generate
tearing artifacts.
There was also a detection logic which did some questionable things in case
vsync was not available. I don't think this is necessary at all since we can
just always run a timer to present with or without vsync.
Test Plan: kwin_x11 tested on i915.
Reviewers: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D23511
Summary:
Current hardware should suppport either GLX_EXT_swap_control or
GLX_MESA_swap_control. To simplify code remove the usage of SGI extensions.
Test Plan: kwin_x11 tested on i915.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: davidedmundson, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D23510
Summary:
It is not clear what the advantage of triple buffering is for KWin. An X11
compositor is meant to swap buffers once every monitor cycle. For that triple
buffering is not necessary.
The functionality is not maintained, does not reliably work as displayed by
the existence of an environment variable to force some behavior, pollutes
our code and every compositing-related problem that might be mitigated with
triple buffering should find a simpler and more fitting solution with other
means.
There is one caveat which is if we shall block for retrace. We set it
currently according to the result of the swap profiler and in the most common
case with double buffering it is set to true. But on Nvidia systems this might
be actual the wrong behavior. Instead of trying to work around this ignore
the issue for now and move the overall architecture to something less complex
by presenting after paint how we do it in the Wayland DRM backend and with
double buffering on GLX (although this is at the moment also borken because
we actually present then twice).
Test Plan: kwin_x11 tested on i915.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, fredrik, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D23504
Summary:
This is necessary to keep openQA working, which uses LLVMpipe as a
renderer on a Cirrus device that operates in depth 16.
LLVMpipe advertises 24/32 bit sRGB configurations on this setup, but
they cannot be presented.
CCBUG: 408594
Test Plan: Compile tested only.
Reviewers: fvogt, #kwin, zzag
Reviewed By: fvogt, #kwin, zzag
Subscribers: romangg, sbergeron, fvogt, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22203
Summary:
EffectQuickView/Scene is a convenient class to render a QtQuick
scenegraph into an effect.
Current methods (such as present windows) involve creating an underlying
platform window which is expensive, causes a headache to filter out
again in the rest of the code, and only works as an overlay.
The new class exposes things more natively to an effect where we don't
mess with real windows, we can perform the painting anywhere in the view
and we don't have issues with hiding/closing.
QtQuick has both software and hardware accelerated modes, and kwin also
has 3 render backends. Every combination is supported.
* When used in OpenGL mode for both, we render into an FBO export the
texture ID then it's up to the effect to render that into a scene.
* When using software QtQuick rendering we blit into an image, upload
that into a KWinGLTexture which serves as an abstraction layer and
render that into the scene.
* When using GL for QtQuick and XRender/QPainter in kwin everything is
rendered into the internal FBO, blit and exported as an image.
* When using software rendering for both an image gets passed directly.
Mouse and keyboard events can be forwarded, only if the effect
intercepts them.
The class is meant to be generic enough that we can remove all the
QtQuick code from Aurorae.
The intention is also to replace EffectFrameImpl using this backend and
we can kill all of the EffectFrame code throughout the scenes.
The close button in present windows will also be ported to this,
simplifiying that code base.
Classes that handle the rendering and handling QML are intentionally
split so that in the future we can have a declarative effects API create
overlays from within the same context. Similar to how one can
instantiate windows from a typical QML scene.
Notes:
I don't like how I pass the kwin GL context from the backends into the
effect, but I need something that works with the library separation. It
also currently has wayland problem if I create a QOpenGLContext before
the QPA is set up with a scene - but I don't have anything better?
I know for the EffectFrame we need an API to push things through the
effects stack to handle blur/invert etc. Will deal with that when we
port the EffectFrame.
Test Plan: Used in an effect
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24215
Summary:
Currently each managed X11 client is represented with an instance of
Client class, however the name of that class is very generic and the
only reason why it's called that way is because historically kwin
was created as an x11 window manager, so "Client" was a sensible choice.
With introduction of wayland support, things had changed and therefore
Client needs to be renamed to X11Client in order to better reflect what
that class stands for.
Renaming of Client to X11Client was agreed upon during the last KWin
sprint.
Test Plan: Compiles, the test suite is still green.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: romangg, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24184
Summary:
Because KWin is a very old project, we use three kinds of null pointer
literals: 0, NULL, and nullptr. Since C++11, it's recommended to use
nullptr keyword.
This change converts all usages of 0 and NULL literal to nullptr. Even
though it breaks git history, we need to do it in order to have consistent
code as well to ease code reviews (it's very tempting for some people to
add unrelated changes to their patches, e.g. converting NULL to nullptr).
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson, romangg
Reviewed By: #kwin, davidedmundson, romangg
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23618
We have lots of inconsistency at the moment in CMakeLists.txt files. Most
of it is due to kwin being a very old project. This change hopefully fixes
all of it.
Summary:
Switch to Q_ASSERT in order to make code a bit more consistent. We have
places where both assert and Q_ASSERT are used next to each other. Also,
distributions like Ubuntu don't strip away assert(), let's hope that
things are a bit different with Q_ASSERT.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: romangg, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23605
Summary:
With 1a11abc821 X11 standalone plugin uses the AbstractOutput interface for
managing its outputs. In there the refresh rate is stored in 1/μs.
Test Plan: currentRefreshRate() provides correct rate.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23265
Summary:
This patch is a first take at splitting up of the Compositor class into
Wayland and X11 child classes.
In this first patch we mostly deal with setup and teardown procedures.
A future goal is to further differentiate the compositing part itself too.
Test Plan: Manually X from VT and Wayland nested. Autotests pass.
Reviewers: #kwin
Subscribers: sbergeron, anthonyfieroni, zzag, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D22195
Summary:
So far we were following a bit unique and rare doxygen comment style:
/**
* Contents of the comment.
**/
Doxygen comments with this style look balanced and neat, but many people
that contribute to KWin don't follow this style. Instead, they prefer
more traditional doxygen comment style, i.e.
/**
* Contents of the comment.
*/
Reviewing such changes has been a bit frustrating for me (so selfish!)
and for other contributors.
This change switches doxygen comment style in KWin to a more traditional
style. The main reason for doing this is to make code review process easier
for new contributors as well us.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22812
Summary:
kwin(28512) QPainter::begin|QPainter::QPainter|KWin::Decoration::Renderer::renderToImage QPainter::begin: Paint device returned engine == 0, type: 3
kwin(28512) QPainter::setRenderHints|QPainter::setRenderHint|KWin::Decoration::Renderer::renderToImage QPainter::setRenderHint: Painter must be active to set rendering hints
kwin(28512) QPainter::setWindow|KWin::Decoration::Renderer::renderToImage|?KWinX11Platform.so? QPainter::setWindow: Painter not active
kwin(28512) QPainter::setClipRect|KWin::Decoration::Renderer::renderToImage|?KWinX11Platform.so? QPainter::setClipRect: Painter not active
Test Plan: seems to happen on startup, at least (when restarting kwin)
Reviewers: graesslin, zzag
Reviewed By: zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9014
Summary:
Currently code base of kwin can be viewed as two pieces. One is very
ancient, and the other one is more modern, which uses new C++ features.
The main problem with the ancient code is that it was written before
C++11 era. So, no override or final keywords, lambdas, etc.
Quite recently, KDE compiler settings were changed to show a warning if
a virtual method has missing override keyword. As you might have already
guessed, this fired back at us because of that ancient code. We had
about 500 new compiler warnings.
A "solution" was proposed to that problem - disable -Wno-suggest-override
and the other similar warning for clang. It's hard to call a solution
because those warnings are disabled not only for the old code, but also
for new. This is not what we want!
The main argument for not actually fixing the problem was that git
history will be screwed as well because of human factor. While good git
history is a very important thing, we should not go crazy about it and
block every change that somehow alters git history. git blame allows to
specify starting revision for a reason.
The other argument (human factor) can be easily solved by using tools
such as clang-tidy. clang-tidy is a clang-based linter for C++. It can
be used for various things, e.g. fixing coding style(e.g. add missing
braces to if statements, readability-braces-around-statements check),
or in our case add missing override keywords.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, apol, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22371
Summary:
QImage::byteCount() was deprecated in Qt 5.10. It is advised to use
QImage::sizeInBytes() method instead.
Reviewers: #kwin, apol
Reviewed By: apol
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22355
Summary:
QRegion::rects was deprecated in Qt 5.11. It is advised to use begin()
and end() methods instead.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22353
Summary:
To streamline Compositor code more remove the composite reset timer. The two
times it was used we can either use a singleshot timer instead or connect the
call to a different signal in the X11 backend.
Long term goal is to have a well structured init of the Compositor such that
we can call directly instead.
Test Plan: Manually in X and Wayland nested session.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D22270
Summary:
The color correction manager doesn't make any specific assumptions about
underlying platform, e.g. whether it's x11, etc. The platform just
has to be capable of setting gamma ramps. Given that, there are no any
significant technical blockers for making this feature work on x.
Reviewers: #kwin, davidedmundson, romangg
Reviewed By: #kwin, davidedmundson, romangg
Subscribers: romangg, neobrain, GB_2, filipf, davidedmundson, ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D21345
Summary:
Represent outputs in the X11 session via AbstractOutput. For that we
move all Wayland specific parts of AbstractOutput into a new subclass
AbstractWaylandOutput and let the outputs of our Wayland backends inherit
from there.
This should allow us to get rid of the Screens class later on.
Test Plan: Manually in X session.
Reviewers: #kwin, zzag, davidedmundson
Reviewed By: #kwin, zzag, davidedmundson
Subscribers: ngraham, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19208
Summary:
The NVIDIA implementation of glXSwapBuffers will, by default, queue up
to two frames for presentation before blocking. KWin's compositor,
however, assumes that calls to glXSwapBuffers will always block until
the next vblank when rendering double buffered. This assumption isn't
valid, as glXSwapBuffers is specified as being an implicit glFlush,
not an implicit glFinish, and so it isn't required to block. When this
assumption is violated, KWin's frame timing logic will
break. Specifically, there will be extraneous calls to
setCompositeTimer with a waitTime of 0 after the non-blocking buffer
swaps, dramatically reducing desktop responsiveness. To remedy this,
a call to glXWaitGL was added by Thomas Luebking after glXSwapBuffers
in 2015 (see bug 346275, commit
8bea96d701). That glXWaitGL call is
equivalent to a glFinish call in direct rendering, so it was a good
way to make glXSwapBuffers behave as though it implied a glFinish
call.
However, the NVIDIA driver will by default do a busy wait in glFinish,
for reduced latency. Therefore that change dramatically increased CPU
usage. GL_YIELD can be set to USLEEP (case insensitive) to change
the behavior and use usleep instead. When using the NVIDIA driver,
KWin will disable vsync entirely if GL_YIELD isn't set to USLEEP
(case sensitive, a bug in KWin).
However, the NVIDIA driver supports another environment variable,
__GL_MaxFramesAllowed, which can be used to control how many frames
may be queued by glXSwapBuffers. If this is set to 1 the function
will always block until retrace, in line with KWin's expectations.
This allows the now-unnecessary call to glXWaitGL to be removed along
with the logic to conditionally disable vsync, providing a better
experience on NVIDIA hardware.
Reviewers: #kwin, davidedmundson, zzag
Reviewed By: #kwin, davidedmundson, zzag
Subscribers: kwin, davidedmundson, zzag
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19867
Summary:
When Compositor finishes compositing, it destroys EffectsHandlerImpl,
which in its turn tries to unload all effects. But there is a problem...
EffectsHandlerImpl has platform-specific hooks to ungrab keyboard and
also stop mouse interception. Given that any call made to a virtual function
in the destructor of a base class(EffectsHandlerImpl) won't go to a derived
class(EffectsHandlerImplX11), keyboard won't be ungrabbed even if effect
that grabbed it is already gone.
BUG: 399572
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19178
Summary:
We have a mix of different doxygen comment styles, e.g.
/*!
Foo bar.
*/
/**
* Foo bar.
*/
/** Foo bar.
*/
/**
* Foo bar.
*/
/**
* Foo bar.
**/
To make the code more consistent, this change updates the style of all
doxygen comments to the last one.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18683
Summary:
Mesa requires XESetWireToEvent xlib callbacks to be called
when DRI2 is used. This is done by the GLX integration in
the Qt's xcb plugin, but Qt 5.12 initializes the GLX integration
only when required, e.g. when a window with OpenGL support is
created or when availability of OpenGL is checked.
So force initialization of the GLX integration by calling
QOpenGLContext::supportsThreadedOpenGL().
https://codereview.qt-project.org/#/c/6557/https://bugzilla.opensuse.org/show_bug.cgi?id=1120090
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: davidedmundson, graesslin, fvogt, filipf, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18366
Summary:
This ensures that KWin gets the same keyboard layout config as is
configured in the session and not a default config.
BUG: 402764
FIXED-IN: 5.14.5
Test Plan:
Xephyr to verify the config is applied, otherwise completely
untested. I don't have an X session.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D17967
Summary:
This change inits XInput extension, listens for touch events and
forwards them to our platform API. Thus touch events are forwarded on a
nested wayland session on X11.
Please note that I only tested this change on Xwayland.
Test Plan: Run nested kwin_wayland with two outputs and looked into debug console
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D17369
Summary:
This brings KWin a step closer to be run from build dir without having
to install at all. The integration tests are adjusted so that the
virtual platform is still found which makes the code be closer to what
is used in normal kwin_wayland.
Test Plan: ctest passes, manually verified correct plugin is loaded
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D17388
Summary:
Instead of seeing the cursor <--> on the left edge you now see an icon
that looks like |<- .
This brings kwin decorations in line with GTK CSD icons.
In theory this is also useful to tell which window will resize in the
case of side-by-side windows (regardless of whether borders are on or
not). In practice with the adwaita icon theme I tested with it's not
very intuitive to realise which is which till you learn the icon.
Change is more involved than it should be as Qt::CursorShape doesn't
have these entries, and I don't want to shadow that enum internally or
have
to change kwin effect code.
Specifics depend on cursor icon theme if they are not present it will
fallback to the <--> icon. (Breeze does not have them currently)
Test Plan:
Resized some windows (on X and on Wayland)
Correct icon appeared on Adwaita
Existing icon appeared on Breeze
Reviewers: #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13396
