Summary:
If a modal window is closed and some alternative effect that animates
the disappearing of windows is enabled(e.g. the Glide effect, or the
Scale effect), the Dialog Parent effect can cause flickering of the
parent window because its animation duration doesn't match duration of
those alternative effects.
Also, if the Fade effect, the Glide effect, and the Scale effect are
disabled, the Dialog Parent will keep the parent window alive for no
good reason.
This change addresses that problem by adding keepAlive property to
`animate` function so scripted effects have more control over lifetime
of animated windows.
If both a modal window and its parent window are closed at the same time
(and there is no effect that animates the disappearing of windows), the
Dialog Parent will stop immediately(because windowDeleted will be
emitted right after windowClosed signal).
If both a modal window and its parent window are closed at the same time
(and there is effect that animates the disappearing of windows), the
Dialog Parent won't reference the latter window. Thus, it won't cause
flickering. I.e. it will "passively" animate parent windows.
BUG: 355036
FIXED-IN: 5.15.0
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14919
Summary:
Check that the Sliding Popups effect grabs windows no matter in what
order it and the Scale effect are loaded.
Test Plan: Ran the test.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15729
Summary:
Getter is exposed as a property on scripted effect in a way that hides
pointers from the scripting side.
Setter is implicitly handled as a property of newly created animations
and holds the activeFullScreenEffect whilst any of them are active. Like
existing effects it remains up to the effect author to avoid the
problems of multiple full screen effects. The RAII lock pattern is
somewhat overkill currently, but it's the direction I hope we can take
EffectsHandler in next API break.
BUG: 396790
--
This patch is against the QJSEngine port, though it's not conceptually a
requirement.
Test Plan: Unit test
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14688
Summary:
QSignalSpy is not happy about KWin::Deleted*:
QWARN : SlidingPopupsTest::testWithOtherEffectWayland(wobblywindows, slide)
QSignalSpy: Unable to handle parameter 'deleted' of type 'KWin::Deleted*' of
method 'windowClosed', use qRegisterMetaType to register it.
Test Plan: Ran the test, haven't noticed any warnings.
Reviewers: #kwin, broulik
Reviewed By: broulik
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15730
Summary:
* effects.h includes client.h and forward declares Client, both at the
same time. Thus, delete the include;
* the blur effect includes effects.h. That, most likely, is a leftover
after 3f5bf65a9e.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15191
stackingOrder is an interesting property which needed
special handling in the port. Add an explicit test.
Test Plan: #kwin
Reviewers: broulik
Reviewed By: broulik
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14533
Summary:
It's superseded by the new scale effect(D13461).
Existing users of this effect will be migrated to the new scale effect.
Depends on D13461
Reviewers: #kwin, #plasma, #vdg, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13462
Summary:
One cannot use a non metatype frrom an external class inside an
invokable. https://bugreports.qt.io/browse/QTBUG-58454
End result is the script engine arguments wouldn't match up and MOC
would just use the default value.
As far as I can tell this has been broken for 6 years.
The global animate method that unboxes a QJSValue as an object is
unaffected.
No shipped kwin effect actually used it.
To some extent we didn't even actually want to enforce the enum as we
also accept custom value of ScriptedEffect::GuassianCurve, so it has
been switched for an int.
Test Plan: Unit test
Reviewers: #kwin, broulik
Reviewed By: broulik
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14669
Summary:
Ready for QJSEngine port and upcoming other fixes.
Split as it makes it easier to do any before/after testing.
Test Plan:
All tests pass with the current QScriptEngine
Verified expected API against a wiki page and current code.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14482
Summary:
When one uses:
* breeze as of 5.12
* wobbly windows
* shaded window
* a distribution building with assert enabled
and starts to move a shaded window, KWin asserts. The root cause for
this is that WindowQuad::makeSubQuad has an assert for y1 being smaller
than y2. With the combination listed above this is not guaranteed. For
the left shadow quad the y1 and y2 are identical and thus trying to
split it, results in the assert condition.
The problem of the shadow quad having an invalid size might be addressed
as well with D10811. Due to that the generation of the quads is not
touched. Instead a sanity check is introduced to not try to split
already invalid sized quads.
BUG: 390953
FIXED-IN: 5.12.3
Test Plan: Added unit test hit the assert, now doesn't hit it any more
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11015
Summary:
Without Xwayland KWin starts so fast that the creation of the EffectFrame
triggers a crash in the Wayland integration as the KWin internal
connection isn't fully setup.
To workaround this crash the creation of the EffectFrame is delayed till
the first usage. It doesn't make sense to try to fix the actual crash as
it would require to defer the creation of all Effects.
Test Plan: New test case added which crashes without this fix.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8821
Summary:
Adds XDGV6 support for the kwin side.
Popup placement support is limited to the stuff v5 had,
a simple offset, rather than the awesome new positioner.
But Qt doesn't make use of it yet either.
Also ideally we should do all the positioning before sending the first
configure, but again Qt doesn't actually do anything with that anyway.
Also integrate pinging clients
Test Plan: gtk3-demo works nicely.
Reviewers: #plasma, graesslin, mart
Reviewed By: #plasma, graesslin
Subscribers: mart, graesslin, kwin, plasma-devel, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D6591
Summary:
By changing all kcfg to have arg="true" we can pass in the same
KSharedConfigPtr into all effects. This allows to have fake config in
the tests and in the planned effect demo mode.
Also it means that we don't have to hardcode the name kwinrc into the
files. In the configs - where we cannot access the effectshandler - we
use the define KWIN_CONFIG which gets generated based on the compile
time arguments.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3571
Summary:
This is a preparation step for no longer creating a socket in the tests
and slightly simplifies the init test code.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3575
Summary:
For Wayland windows we can have a sequence of window unmapped
(windowHidden signal) followed by a windowClosed way later when the
application quits. This is for example the case with menus.
The result of this was that the fade out animation triggered when the
application quit showing all the already closed menus again.
This change implements a windowShown and windowHidden handler and
triggers the fadeIn/Out animation on it. If the window gets shown
again the existing fadeOut animation gets cancelled, so that it can run
again.
If a window gets closed for which a fade out animation has been run
already, it's not triggered again, thus ensuring that we don't see
zombie windows.
CCBUG: 372622
Reviewers: #kwin, #plasma_on_wayland, hein
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3419
Summary:
So far ScriptedEffect used EffectsHandler::effectConfig to get the
KConfigGroup for the ScriptedEffect. This has the disadvantage that the
config file name is hardcoded to kwinrc in EffectsHandler::effectConfig.
Inside KWin a KSharedConfigPtr is used which can point to somwhere else
than kwinrc. If that was the case the ScriptedEffects were not able to
pick up this customized config and instead continued to read values from
kwinrc.
With this change the ScriptedEffects use the KSharedConfigPtr provided
by KWin. Thus in e.g. autotests we can use the general way to configure
the effects and don't need to write to the config.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3383
Summary:
When windows get added some effects grab the window and want to be the
only one animating this window. For this the grab roles exists. An
effect being notified later on evaluates the grab state and does not
start the animation.
This process failed due to being dependent on the order the effects are
loaded. Window Added/Closed are signals emitted by EffectsHandler, thus
first come, first serve. The requested effect order does not play into
it.
Due to that it could happen that an Effect which should not animate,
started to animate as the grab was still there.
This change adds the possibility to be notified whenever the window data
changes. A new signal is added to EffectsHandler which is emitted
whenever the windowData changes. The interested effects connect to it
and cancel their (just started) animation for the window.
Adjusted effects are:
* ScaleIn
* Fade
* WobblyWindows
In case of WobblyWindows an additional logical error was fixed that the
animations were only run when an effect grabbed instead of the other way
around.
BUG: 336866
FIXED-IN: 5.8.4
Reviewers: #kwin, #plasma, broulik
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3211
The first test case was sometimes failing due to the time value in the
first render pass being too high. So that the effect ended directly for
the window.
This change adds a small waiting time for the compositor to render prior
to the creation of the window. Ideally we would connect to frameRendered
signal, but the OpenGL compositor doesn't emit it yet.
Test more combinations of other effects together with sliding popups.
The problem does not only exist for scale in but for pretty much any
effect that the ordering in which the effects get loaded makes the test
pass or fail.
Some effects require OpenGL, as build.kde.org does not support OpenGL
compositing (yet), the tests only do the OpenGL cases if an OpenGL
compositor could be created.
CCBUG: 336866
The test case loads the sliding popups effect and the scale in effect
which also operates on added windows. As the test case shows depending
on the sequence how the effects are loaded, the window gets animated by
both effects (wrong) oor only sliding popups.
CCBUG: 336866
Summary:
It can happen that startAnimation is invoked multiple times for a
window. In case it was invoked a second time the previous animation was
not cancelled. This resulted in the set-animation to never end. When
closing a window, it would stay around as a translucent, non-interactive
window zombie.
This change ensures that existing animations get cancelled.
BUG: 342716
FIXED-IN: 5.8.3
Test Plan: Tested through autotest and manually.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3190
This test case simulates a condition of the translucency effect
modifying windows of certain types (e.g. dialogs).
In case the effect got activated for a window it does not end after the
window gets closed and creates a non-interactive zombie window.
CCBUG: 342716
Summary:
A new method to tell the effects system whether the compositor scene
is able to drive animations. E.g. on software emulation (llvmpipe) it's
better to not do any animations at all.
This information can be used by effects to adjust their behavior, e.g.
PresentWindows could skip transitions or effects can use it in their
supported check to completely disable themselves.
As a first step all scripted effects are considered to be unsupported
if animations are not supported. They inherit AnimationEffect and are
all about driving animations.
The information whether animations are supported comes from the Scene.
It's implemented in the following way:
* XRender: animations are always supported
* QPainter: animations are never supported
* OpenGL: animations are supported, except for software emulation
In addition - for easier testing - there is a new env variable
KWIN_EFFECTS_FORCE_ANIMATIONS to overwrite the selection.
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2386
Summary:
This fixes a regression introduced with a1afeded6a.
The connections were setup every the windowShown signal got emitted.
This caused effects to get multiple singals and start multiple animations
which then do not get cancelled correctly.
The incorrect behavior was most visible in the translucency effect which
did not cancel the move animation and the window stayed translucent.
BUG: 366081
Test Plan:
New test case which simulates the behavior of the translucency
effect.
Reviewers: #kwin, #plasma, sebas
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2346
