Summary:
Pointer constraints should become disabled when the TabBox is invoked. Since
the current client stays activated while TabBox is enabled and currently can
not be deactivated with the risk of regression as discussed in D13758, disable
all pointer constraining explicitly and enable it again when the TabBox is
closed.
Test Plan: Manually in Wayland session.
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T8923
Differential Revision: https://phabricator.kde.org/D14142
When I'm explicitly cycling through the windows of an application it makes no sense to show the "global" desktop window.
BUG: 378662
FIXED-IN: 5.12.0
Differential Revision: https://phabricator.kde.org/D9661
Summary:
Commit 5d9027b110 introduced a regression in TabBox by using the generic
framework inside KWin to test for same application. What I did not
consider was that the code in TabBox was "broken by design". It didn't
use the generic check as that is too strict and considers windows from
different processes as not belonging to the same application. But this
is not wanted in the case of TabBox.
On the other hand the change itself is an improvement to also support
Wayland in a better way and not have special handling situations. Thus
just reverting would not help.
Instead this change addresses the problem by extending the internal API
and to allow more adjustements. So far there was already an
"active_hack" boolean flag. This is extended to proper flags with an
additional flag to allow cross application checks.
The checks in Client which would filter out different applications check
for this flag and are skipped if set. In addition ShellClient also adds
support for this flag and compares for the desktop file name.
Thus we get in TabBox the same behavior as before with the advantage of
having a better shared code base working on both X11 and Wayland.
BUG: 386043
FIXED-IN: 5.11.4
Test Plan:
Started two kwrite processes on X11, clicked new in one of them,
used Alt+` and verified that there are three windows shown.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8661
Summary:
If an Effect has replaced the TabBox and wants to react on mouse events
the EffectsHandlerImpl also has an X11Filter, so we only need to make
sure the events go to that filter.
Motion: TabBox did not filter out, so events will go to the Effects
filter.
Press/Release: TabBox should not operate if Effects take the events.
The events are filtered out by Effects if there is a grab, so just
check for that and go out. Effects will take care.
Test Plan: Compiles
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7846
Summary:
Creating the X11Filter directly on startup caused a regression as the
filter got too early in the chain and stole events from the
XInputIntegrationFilter. We don't need the filter all the time, but only
when we have established the TabBox grab. Likewise we can destroy the
filter again when releasing the TabBox grab. So it's much more
encapsulated now.
BUG: 385032
Test Plan: Only compile tested, I'm on Wayland
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7997
Summary:
TabBox implemented a custom way to check whether two windows belong to
the same application. KWin internally has API for that which does it
better, in a standardized way and even across windowing system.
This change uses the internal API, resulting in the check working better
on X11 and starts to work on Wayland.
Test Plan: Verified Alt+` with Wayland windows
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7713
Summary:
This ensures that the X11 specific events are only read on X11 but not
on Wayland. Also moves quite some X11 specific code out of TabBox.
Test Plan: Compile checked, currently on Wayland, so no way to test.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7395
Summary:
A few areas in TabBox perform casts from Toplevel to Client. By casting
to Client instead of AbstractClient the Wayland windows are excluded.
This change addresses the problem by changing the casts where possible.
The only remaining cast to Client is for shading which is not (yet)
supported for Wayland windows anyway.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6273
Summary:
Based on the feedback from discussion on plasma-devel the currently only
default touch action on a screen edge should be window switching. Given
that our default window switcher is located on the left and works very
nicely for touch event it becomes the default action on the left screen.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5551
Summary:
There is a special mode in TabBox which is the noModifierGrab mode. This
is Alt+Tab active without a modifier being hold. This mode is entered
when being activated through screen edges (either pointer or touch). So
far this was not exposed to QtQuick and thus one could not end the mode
using pointer or touch. It is possible to select another window, but not
to activate it. That required the press of a keyboard key.
This setup is rather unfortunate. By exposing the mode to QtQuick we can
react from QtQuick side to it and invoke already exposed functionality to
select and item and directly activate it - existing left-over from the
Plasma Active window switcher.
Test Plan:
Tested on X11 and Wayland with an adjusted lnf package. It kind
of works, but there are additional issues on both X11 and Wayland.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5414
Summary: Last but not least the TabBox gets adjusted for the new touch callbacks.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D5281
In case we need to set the SwitcherItem model in
`TabBoxHandlerPrivate::show()`, remember the current index row,
otherwise it gets reset to the first item.
Reviewers: #kwin, graesslin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4162
BUG: 333511
Summary:
Prior to this change various event filters performed deep calls into
Xkb class to figure out the modifiers relevant for global shortcuts (aka
consumed modifiers). This shows that this is a general useful
information which should be available to all input event filters
directly.
Thus it's now added to the input events and exposed directly in
InputRedirection so that the calls into Xkb are no longer needed.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3810
Summary:
The TabBox performs the scrolling of the items by itself in order to
support wheel events even if the mouse is not on the TabBox. For that
KWin grabs pointer events on X11 (on Wayland an input filter is used)
and forwards them to the TabBox.
Qt uses Xinput2 for scrolling on the QQuickWindow. Due to that KWin
does not get any xcb core button press/release events when scrolling
inside the QQuickWindow and thus scrolling doesn't work.
There are three possible approaches to fix this:
1. Implement scrolling support in each of the QML switchers
2. Add an xinput2 filter to TabBox
3. Intercept the QWheelEvents on the QQuickWindow
The first approach has the disadvantage that all themes need
adjustment and that there might be behaviorial difference whether one
scrolls on the TabBox window or outside the window.
The second approach would be most in line with the other filters, but
is difficult due to the nature of xinput2 (no xcb bindings, etc).
Thus the third approach might be the best solution. Wheel events are
only delivered to the QQuickWindow if the native events were not already
intercepted, thus we know it won't have side effects for the case that
Wayland is used or xinput2 is not supported.
The implementation installs an event filter on the QQuickWindow which
gets created when showing the TabBox and inside the filter waits till
there is an angleDelta of +/-120 and scrolls by one per every 120 angle
delta as described in the QWheelEvent documentation.
BUG: 369661
FIXED-IN: 5.8.2
Test Plan: Scrolled with touchpad and mouse wheel.
Reviewers: #kwin, #plasma, broulik
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2953
Summary:
The interaction is changed to trigger the check for release from the
TabBoxInputFilter instead of reacting on modifier changes. That way
it's possible to check for the relevant modifiers getting released
instead of getting all modifiers in. Also this means that the checks
are only performed when relevant.
BUG: 368590
Reviewers: #kwin, #plasma_on_wayland, bshah
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2773
Summary:
So far TabBox used highlight windows by passing window ids around through
an X property. This doesn't work on Wayland where we don't have window
ids for our TabBox and the Wayland windows.
This change introduces a new Effect::Feature for HighlightWindows which
the HighlightWindowsEffect provides. The EffectsHandlerImpl has a new
method to highlightWindows which it delegates to that effect if it is
loaded by invoking a new performFeature method.
The TabBoxHandler now passes the highlighting to the effects system
instead of updating the x11 property. Thus this works on Wayland and
at the same time improves the X11 side by no longer having to go through
the property protocol.
Test Plan: Verified that Alt+Tab highlights the windows on Wayland correctly.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2630
Summary:
Toplevel::window() is the actual X11 window. This makes it difficult
to use as the generic identifier for both X11 and Wayland. The Wayland
ShellClient already had a windowId() which is now added to Toplevel as
a virtual method. On X11 (Toplevel default) it returns the window().
The method window() now returns XCB_WINDOW_NONE for classes without
the Toplevel::m_client, such as ShellClient. Thus it allows to properly
check whether we are on Wayland or X11.
The code is adjusted to use windowId where a generic id is needed and
to properly check whether the window is valid before using it where
a window() is used.
This also fixes at least one additional unknown issue in
Workspace::setActiveClient
where the windowId of a Wayland client was passed to X11.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1527
The TabBox implements methods for those events and performs same
logic as on X11. Click outside of TabBox closes. If the event is on
the TabBox we don't filter the event out and let the internal filter
forward the event.
By using QWindow we can also find the TabBox window on Wayland where
the winId is not really helpful.
This also changes the elevation from Unamanged to Toplevel, so that
it is no longer X11 specific.
Result: TabBox stays on top of all windows also on Wayland.
-use qstringliteral only when necessary (i.e. not in concat or comparison)
-use qbytearray instead of qstring when dealing with latin1 input and output (glplatform)
-use qstringref to extract numbers from strings (glplatform)
-define qt_use_qstringbuilder to optimize all string concatenations
-anidata: use ctor init lists, add windowType member initialization
REVIEW: 125933
not everytime the current screen changes.
a) that pollutes the geometry when the tabbox is invoked
b) it's insufficient for "Active Screen follows mouse" (the default)
c) less overhead (ok: "on multiscreen")
BUG: 337790
CCBUG: 341531
FIXED-IN: 5.4
REVIEW: 124814
This is a temporary workaround for bug 349992 which causes freezes
during startup as kwin and kamd dead lock each other on DBus.
To workaround we don't call Activities::create and check in every
usage of Activities::self() whether the pointer is valid.
As a result kwin_wayland now starts pretty fast.
CCBUG: 349992
The change is mostly straight forward. Effects are straight forward
adjusted. Client::findModal is moved up, this causes still a few
dynamic_casts to Client. Mostly because Workspace::activateClient still
operates on Client.
As external interface it still returns Client* to not force the casts
to be done at usages. This will be changed once the users are migrated
to AbstractClient*.
This is now crucial, because while before
(the minimized) windows were conditionally
shown, but are now always behind the desktop.
Also, it makes the tabbox more consistent.
BUG: 344083
REVIEW: 122679
KWin::connection() uses the property to resolve the value instead of
using QX11Info. In practice this doesn't change anything at the moment,
but allows kwin_wayland to provide an xcb connection without depending
on QX11Info.
As we cannot make xcb_connection_t* available as a metatype, the
property's type is set to void*.
KGlobalAccel sets the timestamp as a property and we need to set our
x11Time to it otherwise following keyboard grabs might fail.
Requires 61e2a156678eef033b2629f7c72530dc78d7c3ac in kglobalaccel.
when restacking for shaded windows and uncomposited tabboxes
the group check should not be applied since we know better
eg. to restore a former order
CCBUG: 186206
REVIEW: 122469
Only needed for ScopedCPointer which can be defined in both utils and
xcbutils.h.
Not having utils.h in xcbutils.h makes it easier to have unit tests use
xcbutils.h as it removes the dependencies.
The build option got introduced for Plasma Active back in a time
when we did not properly aim for convergence. In a Plasma 5 world
we want to have only one shell and one window manager which adjust
itself. This means we don't want a differently compiled kwin for
plasma active, but the same one. Thus the build option doesn't
make much sense any more. A KWin for touch interface needs to support
screenedges for the case that mouse is plugged in.
CCBUG: 340960
REVIEW: 121200
Like with WindowSwitcher the configured value might be for the
look and feel package and thus we should first try to locate it
from the look and feel package.
We assume the configured layout name is a look and feel package. Thus
the Switcher is located at contents/windowswitcher/WindowSwitcher.qml
of that package.
REVIEW: 120849
We need to send the event to a QQuickItem which accepts focus. Just
sending it to the Window or to the contentItem doesn't work as there is
no activeFocusItem (might be related to having the keyboard grabbed).
We try to send the event to all children of the Window's content item.
There should hopefully be one item which accepts the event and properly
reacts on cursor keys.
REVIEW: 118471
Both were only added for the use case of Plasma Active. In the next
iteration we won't need the embedded any more as Plasma is able to draw
thumbnails by itself. So there is neither need for the embedded
functionality nor for the D-Bus interface.
REVIEW: 118464
