Summary:
Our rule handling has had a grave error for years. Whenever a window
with a rule was openend or closed the kwinrulesrc was written back to
disk.
The reason for this behavior is that temporary rules need to be discarded
once they were used. For that there is a method discardUsed which invokes
requestDiskStorage whenever a rule for the window was found. But it did
not check whether there was a rule requiring this.
This change modifies the discardUsed to track whether it changed a rule
and only writes back in case there was a change.
BUG: 393911
FIXED-IN: 5.12.6
Test Plan: Only compile tested
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12749
Summary:
The drm platform has a special handling for touch events while the
screen is in dpms. All touch events are filtered out, but a double
tap wakes up the screen.
Due to the filtering out of the events the idle timers were not reset.
So if you only double tapped, the screen turned on, but not off again.
This change updates the timestamp after double tap, so that the idle
timers are restarted. All other events are still filtered out, to not
have "fake" events (e.g. smart phone in pocket) wake up the device.
BUG: 392754
FIXED-IN: 5.12.6
Test Plan: only compile tested
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12668
Summary:
Changing the creation of the nested window from unstable v5 to v6 in
order to be supported on more compositors and to use KWin's better
supported platform.
Targeting 5.12 as this will help to remove support for unstable v5
from KWayland.
Test Plan: Run a nested KWin/Wayland on KWin/Wayland, everything looked fine
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11806
Summary:
From Wayland documentation:
"When a seat's focus enters a surface, the pointer image is undefined and
a client should respond to this event by setting an appropriate pointer
image with the set_cursor request."
KWin's interpretation so far for the undefined pointer image was to
remove the pointer image when entering a surface waiting for the client
to set a cursor image. This can result in a short flicker as there might
be a frame without a cursor image.
This patch changes the behavior by keeping the previous image till the
application set a new one. This brings some advantages:
* if the application is not responding a cursor is still shown
* if the same cursor is used as in the previous window we don't have a
flicker
CCBUG: 393639
Test Plan: I cannot see the flicker, so only tested with the adjusted tests
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12631
Summary:
When you have two windows ontop of each other and you turn them
transparent, evidently you'll be able to see through them.
Not only does it look unpolished if the desktop window flashes through
your windows, it can pose a privacy risk as you'd be able to briefly
look through the lock screen.
This patch fades apps to black intead of to transparent. As this looks
weird for panels, so windows are also faded to opaque (if relevant) at
the same rate.
BUG: 388384
Reviewers: #plasma, graesslin
Subscribers: luebking, plasma-devel, kwin, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9608
Summary:
When using composite key combinations, kwin would do random weird
actions when the first key was pressed (e.g. ` key). This makes sure we
are not trying to match.
BUG: 390110
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12416
Do not blindly select first EGL config from returned list, but choose the one that matches GBM surfaces, that will be created later.
GBM surfaces are created with GBM_FORMAT_XRGB8888 format, so choose the config that matches it.
With wrong format EglGbmBackend::resetOutput() will later fail with error EGL_BAD_MATCH.
Test Plan: Compile, run startplasmacompositor. Verify that OpenGL compositing is used, either by kwin debug console, or by kwin support information.
Reviewers: graesslin, davidedmundson, #kwin, #plasma_on_wayland, bshah
Reviewed By: davidedmundson
Subscribers: zzag, kwin, #kwin
Tags: #kwin, #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D11758
Summary:
Seems to have regressed in Plasma 5.12 due to code reordering. Now the
property is explicitly updated once the NETRootInfo is created.
BUG: 391034
FIXED-IN: 5.12.5
Test Plan:
Test case exposing the problem added. Fails without the patch,
succeeds with the patch.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10836
Summary:
Current color temperature must be applied immediately to hot pluged outputs.
BUG: 391623
Test Plan:
Manually. I'm working on auto tests with the new virtual output classes, but
since 5.12.4 will land before I can finish this work, I have to get this fix
in without them.
Reviewers: #kwin, broulik
Reviewed By: broulik
Subscribers: martinkostolny, broulik, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11654
ModelViewMatrix used to paint windows (which is aware about
multi-monitor configuration) was overriden by reflectionMatrix when
painting reflections, leading to wrong placement of reflections.
Now we just multiply old matrix and reflection matrix.
BUG: 378688
Differential Revision: https://phabricator.kde.org/D10465
Before Plasma 5.12 one could only have either global menu or decoration button configured but since the setting was non-intuitive
it was switched to auto-enable when applet or button is present.
This results in both menus reacting to e.g. Alt+F for File menu.
BUG: 392012
FIXED-IN: 5.12.4
Differential Revision: https://phabricator.kde.org/D11580
Summary:
The Qt Wayland support for subsurfaces is broken in many ways, producing
graphical glitches and crashes:
https://bugreports.qt.io/browse/QTBUG-54888 for instance.
Using a QQuickWidget instead of a QQuickView avoids those issues, with
the additional benefit of a nicer API.
Test Plan:
Opened the KCM with kcmshell and systemsettings, no subsurfaces used
anymore.
Reviewers: #plasma, graesslin, davidedmundson
Reviewed By: #plasma, graesslin, davidedmundson
Subscribers: kwin, plasma-devel, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11066
Summary:
When one uses:
* breeze as of 5.12
* wobbly windows
* shaded window
* a distribution building with assert enabled
and starts to move a shaded window, KWin asserts. The root cause for
this is that WindowQuad::makeSubQuad has an assert for y1 being smaller
than y2. With the combination listed above this is not guaranteed. For
the left shadow quad the y1 and y2 are identical and thus trying to
split it, results in the assert condition.
The problem of the shadow quad having an invalid size might be addressed
as well with D10811. Due to that the generation of the quads is not
touched. Instead a sanity check is introduced to not try to split
already invalid sized quads.
BUG: 390953
FIXED-IN: 5.12.3
Test Plan: Added unit test hit the assert, now doesn't hit it any more
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11015
Summary:
The detect functionality is still extremely bound to X11 and results in
a crash when clicked. Thus it's better to disable it completely in 5.12
on Wayland.
Test Plan: Button disabled on Wayland, enabled on X11
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10642
Summary:
If the cursor theme failed to create KWin crashed due to an endless
recursion. There are two reasons for this fault:
1) When the physical size does not exist we perform a division by 0
which results in an invalid size going into wl_cursor_theme_load
2) We emit the signal that the cursor theme changed even if it didn't
change thus creating an endless recursion
This change addresses both problems: it checks that the size is not 0
and changes the handling for theme update to only destroy the previous
theme if the new theme could be created and only emits the signal if
things change.
BUG: 390314
FIXED-IN: 5.12.3
Test Plan: Added a new test case which crashed with old code
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10549
Summary:
This fixes the problem that alt+lmb did not start unrestricted move
resize for the Debug Console.
BUG: 374880
FIXED-IN: 5.12.3
Test Plan: New test case and manual testing whether alt+lmb/rmb works
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10440
Summary:
On touch down a first hover motion is sent to the decoration. Thus e.g. a
button enters the hovered state. On touch release so far the decoration
did not get a leave event resulting in the button still being hovered.
This change ensures the leave event is sent or if the pointer is also on
the decoration a motion to the pointer position is sent.
BUG: 386231
FIXED-IN: 5.12.3
Test Plan:
New test case and manual testing to verify that the maximize
button is no longer hovered after touch down/up on it
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10308
Summary:
If the window never provides the appId, we would not get an icon for
the window. This happens for example for KWin's internal windows which
don't set the app id as KWin also doesn't have a desktop file. With this
change the DebugConsole has a window icon in the decoration.
Test Plan: Extended tests and manual verification of DebugConsole
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10294
Summary:
The window rule detection is too bound to X11 for it to work for
Wayland windows. In fact it results in the config module just crashing.
Thus it's better to just disable the items in the menu. As it's only for
X11 windows we can also enforce platform xcb for the rules dialog.
Test Plan: Menu disabled on Wayland window, menu enabled on Xwayland window
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10594
Summary:
When a window was being moved the touch handling performed the wrong
interaction. Due to that it was possible to move the window, but KWin
did not enter the correct code paths, thus quick tiling was for example
not functional.
BUG: 390113
FIXED-IN: 5.12.3
Test Plan: New test case added and manual test in nested KWin
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10431
