Summary:
The configuration file kcminput, group Mouse is parsed to decide whether
pointer devices should be in left handed mode. The config is applied
whenever a new device is added.
In addition the Connection listens to KGlobalSettings for a mouse
settings changed signal which might be emitted by the mouse KCM.
When such a signal is emitted, all pointer devices are reconfigured.
This allows to change the mouse handed settings on Wayland.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1543
Summary:
Similar to[[ https://phabricator.kde.org/D1216 | D1216 ]] add procctl call to disable ptrace on FreeBSD.
We cannot do the procfs-lookup to check whether the process is already being run inside gdb -- however, on FreeBSD, we could use the P_TRACED flag of the process to figure this out:
> sys/proc.h:#define P_TRACED 0x00800 /* Debugged process being traced. */
And the code would look something similar to
```
pid_t pid = getpid();
struct procstat *prstat = procstat_open_sysctl();
struct kinfo_proc *procinfo;
unsigned int cnt;
procinfo = procstat_getprocs(prstat, KERN_PROC_PID, pid, &cnt);
long p_flags = procinfo->ki_flag;
int p_traced = p_flags & P_TRACED;
if (p_traced != P_TRACED) {
mode = PROC_TRACE_CTL_DISABLE;
procctl(P_PID, getpid(), PROC_TRACE_CTL, &mode);
}
procstat_freeprocs(prstat,procinfo);
procstat_close(prstat);
```
But as wayland is [far] in the future on FreeBSD, and that check above is a bit lengthy, I think it is enough if we add it once it is needed.
Reviewers: rakuco, graesslin
Reviewed By: graesslin
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1425
Summary:
This change ensures that kwin_wayland does not pull in KCrash. We
don't want and need KCrash in the Wayland case. If KWin crashes the
session goes down - restarting doesn't make any sense, we need to
relogin.
Similar drkonqi just doesn't work as it doesn't have a windowing
system to connect to. After all the windowing system just crashed.
Also the AlternativeWM dialog doesn't make any sense on Wayland.
Similar thought: there is no windowing system to show this nice dialog.
Overall it's better to have system default behavior
(e.g. systemd-coredump) than using KCrash in the very special case of
kwin_wayland.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1550
Allows to toggle Activity Manager and bring up KRunner by hitting the configured screen edge.
BUG: 358627
BUG: 245979
Differential Revision: https://phabricator.kde.org/D1105
Apparently libinput is too old and LIBINPUT_DEVICE_CAP_TABLET_TOOL is
not yet available. As we don't use it yet, it's put into the #if 0 part
for future use.
Summary:
The Device class wraps all the information we can get from libinput
about the device, like whether it's a keyboard, pointer, touch, etc.
In addition some more information is queried to figure out how "useful"
a device is. For a keyboard all alphanumeric keys are checked whether
they exist, for a pointer all (normal) buttons are queried.
All the information is exposed as Q_PROPERTY and used by the
DebugConsole. The DebugConsole gained a new tab "Input Devices" which
renders all devices and their properties in a tree view. When plugging
in/out a device, the model gets reset, so it's always up to date.
The new Device class can be used in future to configure the device,
e.g. disable touch pad, set mouse acceleration, etc.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1538
Summary:
This ensures that QWindow::setMask works for KWin internal windows.
Without KWin sends all pointer events to the QWindow, even if the
mask says it shouldn't get events.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1509
Summary: It's instantiated, but never created. This means that libkscreen's wayland backend is going to hang initializing.
Test Plan: Ran libkscreen against it, works with and doesn't work without patch.
Reviewers: graesslin, #plasma
Reviewed By: graesslin, #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1524
Summary:
Instead of checking the operation mode for X11, we check whether the
damage_handle is created. This fixes a bad damage warning for Wayland
windows in kwin_x11.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1490
Summary:
To check which code path we should take just check whether
* we have a surface -> Wayland
* we have a pixmap -> X11
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1487
Summary:
If the Toplevel has a Wayland Surface we don't want an X11 damage
handle. Ideally we would just check for the Surface and get rid of
the operation mode check. But setupCompositing is called for Xwayland
clients before the surface is set.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1486
Summary:
Instead of binding to the OperationMode whether the damage_handle
should be destroyed, we bind it to whether damage_handle got created.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1483
Summary:
Instead of having the Application invoke initOutputs after creating
the Screens, we can just connect to the signal emitted there.
This allows to make initOutputs a private, WaylandServer internal
method.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1482
Summary:
In order to start the WaylandServer in kwin_x11 we need to make sure
that WaylandServer does not start the KScreenLocker integration. On
X11 the lock screen is provided by a different application (in Plasma
by ksmserver).
A new init flag is added to WaylandServer to not integrate with
KScreenLocker. Thus the default is still to integrate with KScreenLocker.
All direct usages of KScreenLocker are guarded to not be called if
the screenlocker integration is not present.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1481
Summary: This seems to just have been forgotten here.
Test Plan: Builds
Reviewers: graesslin
Reviewed By: graesslin
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1499
The Scripted and PluginEffectLoader perform locating all effects which
are to be loaded in a thread. When the EffectLoader gets cleared so far
the query did not get canceled. This resulted in effects maybe getting
loaded.
This problems shows on build.kde.org if the test is too fast and tears
down the Effect system while effects are still being queried.
Reviewed-By: David Edmundson
CI system shows that on tear down an effect might call into Workspace
after it's destroyed. Unloading all effects prior to deleting Workspace
should(TM) fix that. Unfortunately I'm not able to reproduce the problem
locally, so build.kde.org needs to verify.
Without the /dev/dri/card0 mesa fails to initialize egl and the test
fails. In order to silence the failure till the system provides the
device file, we better skip the test.
A nullptr crash in that case is fixed in WaylandServer tear-down.
Summary: Move/Resize and Strut tests Wayland tests are affected.
Test Plan: Successful compilation when XCB_ICCCM is not found
Reviewers: graesslin
Reviewed By: graesslin
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1476
Summary:
So far KWin resolved the logind session to take over by using its own
PID with the method GetSessionByPID. This doesn't work if KWin itself
is not part of the session or if KWin is supposed to take over a
different session.
The session to take over is now derived from XDG_SESSION_ID. If it is
not set the variant through getSessionByPID is used.
This allows to e.g. run kwin on vt1, but have the graphical output
on vt2. Thus it's possible to see the debug output. Also it should allow
to run kwin_wayland through an ssh session, so that gdb can be used.
If we take over another session on a different vt, we need to make sure
that it's the current virtual terminal. Otherwise assumptions in the
startup code would break. So let's ensure the session we integrate with
is active.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1445
The hwcomposer plugin doesn't need it. It was only created for the
need of libinput relying on it. As libinput doesn't need it any more,
hwcomposer doesn't need to integrate with VirtualTerminal.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1444
All the important information like whether we are on the active vt are
also provided by Logind. So instead of integrating with VirtualTerminal,
which integrates with Logind, we can just integrate with Logind directly.
Summary:
Sets movable and resizable states on the Wayland window.
kwin doesn't have state change signals for this, so it's a one-time thing.
Depends on D1432.
Reviewers: graesslin
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1434
Removes a diversion between X11 and Wayland. The base class Platform
creates an instance of class Edge with plugin implementations being
able to create a different type.
The X11StandalonePlugin does that and creates a WindowBasedEdge. For
this the implementation of WindowBasedEdge is moved from screenedges
into the plugin.
Unfortunately an ifdef is needed to make the screenedge test still
work as expected. This should be improved in future, e.g. have a good
way to load the platform plugin from the tests.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1419
Summary:
In preparation to support xdg-shell we need to make sure that ShellClient
does not assume m_shellSurface to not be null.
Everything that can be done through the surface() is resolved through
surface(). All accesses to m_shellSurface are nullptr checked.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1441
Summary:
Preparation for also supporting XdgShell. There will be different
ctors for ShellSurface and XdgShell, but most code needs to be shared.
Thus a dedicated init method is needed.
There is some restructuring in the init. All code depending on
ShellSurface being set is grouped and in an if block.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1440
Summary:
Makes use of new API in kwayland to expose shade state.
Depends on D1417.
Reviewers: graesslin
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1418
Summary:
The cursor position is the reference KWin uses while moving a window.
If we don't warp the cursor position the window "jumps" to the cursor
position on first movement.
For requests triggered by the client (e.g. widget style) this does not
matter as the cursor is at the correct position. But for tools such as
task bars we should ensure the cursor is at the right pos.
Reviewers: #plasma, hein
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1421
