In case of native graphics system nothing is changed for the moment - the
X11Pixmap-QPixmap bridge is continued to be used.
But in case of graphics system raster (or Qt5) this relationship is no
longer used. Instead the QPixmap is converted to a QImage and the image
bits are put into the created X11Pixmap for this XRenderPicture.
Note: Qt5 uses shm to transfer image data to drawables. This seems
unsuited in this case as it's only a one time transformation.
For Qt5 the native pixmap block needs to be removed and the ctor might be
changed to taking an QImage as argument to make more clear that there is
no mapping from QPixmap to X11Pixmap.
Instead of having a pointer to a QPixmap the offscreen target holds an
xcb_render_picture_t. To make this possible in SceneWindow the tempPixmap
is changed from a QPixmap* to a XRenderPicture*. QPixmap was only used
for convenience.
ScreenShot Effect as only user of the offscreen target is adjusted but
as it needs a QImage, still uses a QPixmap wrapper.
This follows how it is done for OpenGL where the renderRoundBox() got
dropped some time ago.
New implementation implements the box with round corners using xrender
directly instead of using a QPainter on a QPixmap.
EffectsHandlerImpl starts to monitor DBus for the screen being locked and
provides this information to the Effect system by allowing them to ask
whether the screen is currently locked and by emitting a signal when the
screen gets locked/unlocked.
This information is needed to ensure that no private data is shown on the
screen. The following effects are adjusted:
* taskbar thumbnails
* thumbnail aside
* mouse mark
* screen shot
BUG: 255712
FIXED-IN: 4.11
REVIEW: 108670
For each edge an additional "approach" area window is created. When the
mouse enters this approach window, it gets unmapped and a mouse polling
interval is started. If the mouse leaves the approach area again, the
window gets mapped again and the mouse polling is stopped.
During the approaching a signal is emitted with a factor in [0.0,1.0] to
describe how close the mouse is to the edge. 0.0 means far away, 1.0
means triggering the edge. This signal is passed to the effects to allow
using this information. E.g. to provide a glow corner effect or to make
use of it in the cube animation effect to start the animation on desktop
switch.
The main difference is that the activation of an edge is no longer
broadcasted to all effects and scripts, but instead a passed in slot of
the Effect/Script is invoked.
For this the EffectsHandler API is changed to take the Effect as an
argument to (un)reserveElectricBorder. As callback slot the existing
borderActivated is used.
In addition the ScreenEdge monitors the object for beeing destroyed and
unregisters the the edge automatically. This removes the need from the
Effect to call unregister in the dtor.
BUG: 309695
FIXED-IN: 4.11
No effect has ever used these methods and there is no reason why an
effect should use them. Reserve/unreserve is sufficient as the effect
will be notified anyway.
Use xcb to create and manage the X11 backend of Outline. In addition the
used background pixmaps are rendered with XRender instead of using a
QPainter on a QPixmap. This is done because QPixmap is no longer bound to
an X Pixmap.
To create the XRender Picture the available functionality from
kwinxrenderutils is used. To be able to use it in KWin core the compile
option to build without XRender is removed for kwinxrenderutils, but
still supported for effects.
Obviously the port to XCB is not complete as xremderutils itself is still
on XLib.
REVIEW: 108642
In effects it's obvious that compositing is enabled, so specifying the
translucent element is no problem.
In tabbox a context property "compositing" is injected which decides
whether "translucent" or "opaque" elements should be used. Here the
translucent elements are only used if the Blur effect is available - for
this a new Effect::Feature Blur is introduced and in addition it is
tested whether the theme provides the translucent element.
Also the masking is adjusted to ensure that only the shadow is not
blurred.
Reason for this change is that Plasma theme seems not always to pick up
whether compositing is used when used from inside KWin. It does not cover
the Desktop Change OSD which uses PlasmaCore.Dialog and there we cannot
(yet) inject that we use compositing.
Overall I'm quite unhappy with this patch and I do hope we can fix it in
the proper place in the lifetime of 4.10 and revert this patch.
CCBUG: 311995
REVIEW: 108438
The extension handling is removed from kwinglobals and moved into the
xcbutils in KWin core in namespace KWin::Xcb. The motivation for this
change is that the Extensions are only used in KWin core and are marked
as internal. So there is no need to have them in the library.
What remains in Extensions are the non-native pixmaps. This will be
removed once we are on Qt 5 as QPixmap can no longer reference an XPixmap.
The remaining code in kwinglobals also still initialize the XLib versions
of extensions emitting events. It seems like there are no XEvents emitted
if not done so even if the extension is correctly initialized with xcb.
This needs to be removed once the event handling is ported over to xcb.
REVIEW: 107832
This property can be used to check whether a window is currently visible
to the user, that is:
* not minimized
* on the current desktop
* on current activity
This is a common need for various effects.
REVIEW: 108341
When correcting a color that was with premultiplied alpha, the alpha
value was not multiplied back again as a final step. This was breaking
color correction when the blend function was GL_ONE,
GL_ONE_MINUS_SRC_ALPHA. The blend function was changed for normal
windows (a workaround), but not for effect frames, i.e. the effect
frames were broken with color correction enabled.
Removes the blend function workaround.
Removes a useless setupForOutput.
BUG: 311319
REVIEW: 108189
Checks are now performed for GL errors and in case of errors everything
is aborted. The error handling mechanism introduced for this purpose
somewhat improves the color correction code.
Fix gl invalid operation in color correction, when first setting up the
lookup texture uniform.
REVIEW: 107754
Instead of each effect, which needs to announce support, having custom
code to create a property and set it on the root window, there is now a
common API in EffectsHandler to take care of this.
The methods takes care of creating the atom if it has not already done
and set the property on the root window. Furthermore it allows multiple
effects to announce the same property without getting in conflict with
each other.
As a further convenience the property is automatically removed when the
effect is unloaded, so less things an effect author has to care about.
REVIEW: 107815
The ownership for virtual desktops is moved from Workspace into a new
VirtualDesktopManager. The manager is responsible for providing the count
of virtual desktops and keeping track of the currently used virtual
desktop.
All methods related to moving between desktops are also moved from
Workspace to the new manager, though all methods related to Clients on
Virtual Desktops remain in Workspace for the time being. This is to have
the new manager as independent from KWin core as possible.
An rather important change for the handling of virtual desktops is that
the count and the id of a desktop is now an unsinged integer instead of
an integer. The reason for that is that we cannot have a negative count
of desktops as well as it is not possible to be on a desktop with a
negative identifier.
In that regard it is important to remember that a Client can be on a
desktop with a negative identifier. The special value for a Client being
on all desktops is handled by using -1 as a desktop. For the time being
this is not adjusted but instead of comparing the virtual desktop ids one
should prefer to use the convenient methods like isOnDesktop and
isOnAllDesktops. This would allow in future to internally change the
representation for on all desktops.
This method can be used to get the animationTime in case a configuration
class generated through KConfigXT is used. In general the configuration
stores the magic value 0 for a property "duration". This magic value
indicates that a hard-coded default value should be used.
So the common logic to test the stored value for 0 and then either pass
the stored value or the default value to animationTime is encapsulated
in this method in a generic way.
A MyEffect can use it in the following way:
animationTime<MyEffectConfig>(200);
BUG: 310646
FIXED-IN: 4.10
REVIEW: 107460
QElapsedTimer uses a monotic clock on all relevant systems
and is thus invarant against date/time changes (while the
bug was likely caused by daybreaks)
BUG: 306186
REVIEW: 107250
FIXED-IN: 4.10
use monitc clock
Add an option to kcmcompositing in the 'Advanced' tab, to enable or
disable color correction. It is specified that it's experimental and it
needs Kolor Manager.
Before painting for a particular screen, ColorCorrection::setupForOutput
should be called.
A screen property is added for WindowPaintData.
In kwinglutils, The fragment shaders are intercepted before being
compiled and they get a couple of lines of code inserted in order to do
the color correction. This happens only when color correction is enabled, of
course.
For D-Bus communication with KolorServer, everything is async.
The implementation basically manages a set of color lookup tables for
different outputs and for different window regions. These are taken via
D-Bus. Each lookup table has around 700 KB.
This commit reintroduces the changes from the former merge with the
"color2" branch. In this form, it can be easily reverted.
REVIEW: 106141
This was originally added by d467fc1bdbcf69bd6ef213bd909633c2edfb6878,
to prevent alpha ending up to be 0 with blending disabled. Apparently,
that was a driver issue that is no longer present.
REVIEW: 107090
This merge is incomplete and it does not include the review number of
the associated review request. It should have been pushed as a single
commit, because the merged commits were not intended to be published in
their form.
This reverts commit dcba90263069a221a5489b1915c5cf1ca39d090c, reversing
changes made to 50ae07525c7fde07794e7548c3d6e5a69cb1a89d.
Conflicts:
kwin/scene_opengl.cpp
kwin/scene_opengl.h
A decoration can provide the AbilityAnnounceAlphaChannel in addition to
AbilityUsesAlphaChannel. If this ability is provided the decoration can
enable/disable the use of the alpha channel through setAlphaEnabled().
The base idea behind this mechanism is to be able to tell the compositor
that currently alpha is not needed. An example is the maximized state in
which the decoration is fully opaque so that there is no need to use the
translucency code path which would render all windows behind the deco.
In addition also the blur effect honors this setting so that behind a
known opaque decoration no blurring is performed.
Oxygen is adjusted to disable translucency in maximized state and Aurorae
is adjusted to allow themes to enable/disable translucency. For Plastik
translucency and with that also blurring is disabled.
REVIEW: 106810
Use XDamageReportNonEmpty instead of XDamageReportRawRectangles.
In XDamageReportNonEmpty mode the server generates a single damage
event when the damage state transitions from not-damaged to damaged.
When the compositor is ready to paint the screen, it requests the
damage region for each window and resets the state to not-damaged.
With XCB we can request the damage regions for all windows in a
single roundtrip, making this the preferred mode.
This should reduce the number of wakeups and the time spent
processing damage events between repaints.
Adjustment to reality. KWin has had a dependency on Mesa 8.0 for quite
some time given that it is what basically all distributions ship.
It is better to clearly state what is required. For KWin Mesa 8.0 is a
more reliable dependency as all DRI drivers which do not support DRI2
have been removed.
Packagers have been informed about this intended change some weeks ago.
REVIEW: 106799
During detecting the OpenGL capabilities also a recommended compositor
can be set. This recommendation is honoured by the OpenGL based
compositors. That is the SceneOpenGL2 requires a recommendation for at
least OpenGL2 and the SceneOpenGL1 requires at least a recommendation for
OpenGL1. If the driver recommends XRender compositing the SceneOpenGL
performs the existing fallback to XRender.
With this recommendation the hacks in the Scene are removed, e.g. it is
no longer checked whether the driver is software emulation as that is
provided through the recommendation.
To overrule the recommendation the environment variable KWIN_COMPOSE is
extended by the values O1 and O2 to enforce either OpenGL 1 or OpenGL 2.
This overwrites all other checks. As a side-effect this allows now to run
KWin on the llvmpipe:
LIBGL_ALWAYS_SOFTWARE=1 KWIN_COMPOSE=O2 kwin --replace &
But not that I would recommend to use it :-)
REVIEW: 106741
If the build option is enabled KWIN_HAVE_OPENGL_1 is passed as a compile
flag when build against OpenGL.
This compile flag is meant to replace the KWIN_HAVE_OPENGLES. So far code
has been ifdefed for special behavior of OpenGL ES 2.0 and to remove
fixed functionality calls which are not available in OpenGL ES 2.0.
With this build flag the fixed functionality calls which are only used in
the OpenGL1 Compositor can be removed and keeping the KWIN_HAVE_OPENGLES
for the real differences between OpenGL 2.x and OpenGL ES 2.0.
E.g. a call like glColor4f should be in an
glColor4f(1.0, 1.0, 1.0, 1.0);
while a call like glPolygonMode should be in an
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
Building for OpenGL ES 2.0 of course implies that KWIN_HAVE_OPENGL_1 is
not defined.
VMware uses a Gallium driver which means that OpenGL based compositing
works out of the box without any adjustments to GLPlatform.
Just adding recognizing code for the SVGA3D driver.
REVIEW: 106826
OpenGL is properly working if there is a direct rendering context.
If LIBGL_ALWAYS_INDIRECT is set VirtualBox falls back to Mesa's software
rasterizer. So in order to get OpenGL the driver is now whitelisted in
the opengltest.
GLPlatform is extended to recognize the VirtualBox driver and has new
methods to report whether it is a virtual machine and VirtualBox. The
detection is rather limited as we don't get access to the underlying
hardware, so we do not know whether the features are really supported.
We need to trust the driver here in announcing the right extensions.
The driver does not provide glxQueryDrawable although it is part of
GLX 1.3. A hack is added in the glxbackend to set the function pointer to
NULL. This can unfortunately not be done in glxResolveFunctions() as
QueryDrawable seems not to be provided by an extension (at least not
listed in the OpenGL registry) and getProcAddress resolves a function but
it only prints an OpenGL Warning to stderr.
As a note: the driver reports that it is using XSHM for
GLX_EXT_texture_from_pixmap.
REVIEW: 106821
