Test Plan:
* Maximized Konsole with enabled blur
* Everything works as expected
Reviewers: #kwin, mart
Reviewed By: #kwin, mart
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13156
Summary: It improves a little bit readability and comprehensibility of the code.
Reviewers: #kwin, mart
Reviewed By: #kwin, mart
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13116
Summary:
When disconnecting from `blurChanged` signal, `(w, connection)` pair is
being looked up three times. We can do better by using `QMap` in a more
STL-like way.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13118
Summary:
On wayland blur on secondary monitor would not render correctly.
BUG: 393723
Depends on D12452
Test Plan:
- use more than one output
- log in in a wayland session
- open a transparent window (for example: Konsole with transparent and blur enabled profile)
- drag the window to another screen
- blurs the content under the window corretly
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: apol, zzag, davidedmundson, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12678
Summary: For more details, see D12452.
Reviewers: #kwin, davidedmundson, fredrik, mart
Reviewed By: #kwin, davidedmundson, mart
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12466
Summary: Use the blur effect even while the window is being maximized/unmaximized.
Test Plan:
Before:
{F5828510}
After:
{F5828511}
Reviewers: #kwin, #vdg, graesslin, ngraham
Reviewed By: #kwin, #vdg, graesslin, ngraham
Subscribers: ngraham, graesslin, zzag, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12623
Summary:
Use the blur effect even when the present windows is used.
Previously it was only enabled for the close buttons and the dock.
Test Plan: {F5828442}
Reviewers: davidedmundson, fredrik, #vdg, #kwin, graesslin, ngraham
Reviewed By: #vdg, #kwin, graesslin, ngraham
Subscribers: ngraham, zzag, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12619
Summary:
`QGuiApplication::primaryScreen()->logicalDotsPerInch()` sometimes reports incorrect scale value, for example 95.951 (or even lower) instead of 96.0 at 1x scale and this caused to simply darken blurred areas instead of noising them.
This patch sets a minimum 1x scale for the noise texture, because realistically we will never be below that.
Reviewers: davidedmundson
Reviewed By: davidedmundson
Subscribers: davidedmundson, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12519
Summary:
When you have two windows ontop of each other and you turn them
transparent, evidently you'll be able to see through them.
Not only does it look unpolished if the desktop window flashes through
your windows, it can pose a privacy risk as you'd be able to briefly
look through the lock screen.
This patch fades apps to black intead of to transparent. As this looks
weird for panels, so windows are also faded to opaque (if relevant) at
the same rate.
BUG: 388384
Reviewers: #plasma, graesslin
Subscribers: luebking, plasma-devel, kwin, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9608
Summary:
Resetting timeline while animating a window causes some visual "glitches",
see videos below. Even though we can't use `QTimer::toggleDirection`,
that's safe to delete code which resets timeline because `prePaintScreen`
figures out correct direction of the timeline.
Before
{F5809862, layout=center, size=full}
After
{F5809898, layout=center, size=full}
Reviewers: #kwin, davidedmundson
Reviewed By: davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12254
Summary:
Resetting timeline while animating a window causes some visual "glitches",
see videos below. Even though we can't use `QTimer::toggleDirection`,
that's safe to delete code which resets timeline because `prePaintScreen`
figures out correct direction of the timeline.
Before
{F5809835, layout=center, size=full}
After
{F5809850, layout=center, size=full}
Test Plan:
* Set duration to 5000
* Furiously click an icon in the task manager
Reviewers: #kwin, davidedmundson
Reviewed By: davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12253
ModelViewMatrix used to paint windows (which is aware about
multi-monitor configuration) was overriden by reflectionMatrix when
painting reflections, leading to wrong placement of reflections.
Now we just multiply old matrix and reflection matrix.
BUG: 378688
Differential Revision: https://phabricator.kde.org/D10465
ModelViewMatrix used to paint windows (which is aware about
multi-monitor configuration) was overriden by reflectionMatrix when
painting reflections, leading to wrong placement of reflections.
Now we just multiply old matrix and reflection matrix.
BUG: 378688
Differential Revision: https://phabricator.kde.org/D10465
Summary: This is a follow-up for D11377, as requested by @graesslin. The patch removes the default shortcuts for the {nav Move zoomed area} actions.
Test Plan:
Deployed KWin with patch, killed and restarted KWin, created and logged into new user account, then zoomed in:
- {key Meta Ctrl Arrows} do not move the zoomed view
- The actions are still visible (without shortcuts) in {nav System Settings > Shortcuts > Global Shortcuts > KWin}
- You can still set custom shortcuts for the actions, and they work
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11526
Summary:
KWin's window management powers are not as discoverable as they could be--particularly tiling, which by default has no visible UI and no keyboard shortcuts. Resolving this issue is highly relevant to {T6831}.
This patch re-assigns the {key Meta arrowkeys} shortcuts that are currently used for `move zoomed area` (which are pretty esoteric, infrequently-used actions), adding {key ctrl} to their shortcuts. This allows us to use their valuable {key Meta arrowkeys} for more useful and commonly-used window management actions:
- {key Meta Left}: quick tile window to the left
- {key Meta Right}: quick tile window to the right
- {key Meta Up}: quick-tile window to the top
- {key Meta Down}: quick-tile the window to the bottom
The patch also sets some default shortctuts for minimize and maximize:
- {key Meta PageDown}: minimize window
- {key Meta PageUp}: maximize/de-maximize the window
Test Plan:
Do a clean build
`make test` (no new test failures)
Reboot
Create and log into a new user account
- {key meta up} tiles the active window to the top
- {key meta down} tiles the active window to the bottom
- {key meta left} tiles the active window to the left
- {key meta right} tiles the active window to the right
- {key meta PageDown} minimizes the active window
- {key meta PageUp} maximizes and de-maximizes the active window
- {key meta ctrl up} moves the zoomed area up
- {key meta ctrl down} moves the zoomed area down
- {key meta ctrl left} moves the zoomed area to the left
- {key meta ctrl right} moves the zoomed area to the right
Reviewers: #kwin, #plasma, romangg
Reviewed By: #kwin, #plasma, romangg
Subscribers: mart, romangg, broulik, jnoack, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11377
Summary:
The new slide effect tries to separate each virtual desktop
as much as possible. This separation makes the new slide
effect more intuitive than the old one.
Test Plan:
* switch between virtual desktops
* or, move a window to another virtual desktop
Reviewers: #vdg, #kwin, #plasma, graesslin, ngraham
Reviewed By: #kwin, #plasma, graesslin
Subscribers: mart, graesslin, abetts, ngraham, plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9638
Summary:
Added the option to turn on noise behind the blurred area.
The lowest strength value disables it completely, so it is optional and is disabled by default.
Test Plan:
Edit: this new screenshot shows the updated noise generation.
Edit2: separated the screenshots so you can flick through them to clearly see the differences
{F5694024}
{F5694031}
{F5694025}
{F5694028}
Reviewers: #kwin, #vdg, fredrik
Reviewed By: #vdg, fredrik
Subscribers: davidedmundson, matheusm, romangg, ivan, zzag, ngraham, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10281
Summary:
Since the new blur is more efficient "fastblur" or "simpleblur" is not needed anymore for fullscreen blur.
Even my old low-end laptop from 2009 (with Intel T3300) can easily do fullscreen blur now with the new method without any hitch at all.
Reviewers: graesslin, #kwin, #plasma, #vdg, fredrik
Reviewed By: #vdg, fredrik
Subscribers: avaragic, fredrik, ngraham, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10181
Summary: The default blur value of 5/15 is too low.
Test Plan:
Before:
{F5681825}
After:
{F5681826}
Reviewers: #vdg, #kwin, fredrik
Reviewed By: #vdg, fredrik
Subscribers: ngraham, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10180
Summary: In D9848 the file permissions in effects/blur where accidentally changed from 644 to 755.
Test Plan: {F5674656}
Reviewers: #kwin, hein
Reviewed By: hein
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10100
Summary:
Updated the old and outdated blur method to use the much more efficient dual kawase blur method.
Now with this we can do virtually infinite blur with very very little performance cost.
The dual kawase blur method is basically downscaling and upscaling an image, but combined with the kawase blur shader.
Comparison: https://i.imgur.com/mh6Cw61.png
Left is old, right is new.
Comparison was done with the strongest blur setting in a VM running on an Intel i7-4790 and a GTX980
We can see here that the performance is even better with this new method.
Reviewers: #plasma, #kwin, graesslin, fredrik
Reviewed By: fredrik
Subscribers: hein, dos, luebking, broulik, romangg, zzag, anthonyfieroni, mart, davidedmundson, fredrik, ngraham, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9848
Summary:
It is known to create problems especially on multi-screen and is not as
important on Wayland as it used to be on X11 thanks to things like
buffer age and in general better rendering.
Test Plan: Opened the config module and verified that the option is
hidden
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9879
Summary:
Currently, slide effect doesn't handle a case when there
is a moving client. This results in having window jumps.
This commit fixes it by fixing position of the moving client
during switching to another desktop.
Test Plan: * send window one desktop to the left/right using shortcuts
Reviewers: #kwin, #plasma, graesslin
Reviewed By: #kwin, #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9487
Summary:
At the moment, there is no way to tweak duration of the slide animation.
This change adds a configuration module so it is possible to change
the duration.
Test Plan:
* enable virtual desktops
* go to `System Settings > Desktop Behaviour > Desktop Effects`
and select Slide effect under "Virtual Desktop Switching Animation"
* click settings/options button and change duration
Reviewers: #kwin, #plasma, graesslin
Reviewed By: #kwin, #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9382
Especially the BlurEffect::expanded() method is called a lot.
Saves creating a temporary QVector.
Differential Revision: https://phabricator.kde.org/D9101
Summary:
Without Xwayland KWin starts so fast that the creation of the EffectFrame
triggers a crash in the Wayland integration as the KWin internal
connection isn't fully setup.
To workaround this crash the creation of the EffectFrame is delayed till
the first usage. It doesn't make sense to try to fix the actual crash as
it would require to defer the creation of all Effects.
Test Plan: New test case added which crashes without this fix.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8821
Summary: Fixes the build with D8705
Test Plan: Just adds includes, I wonder if it should go into Plasma/5.8 and /5.11 too
Reviewers: #plasma, davidedmundson
Reviewed By: #plasma, davidedmundson
Subscribers: graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8706
Summary:
Instead of calling reconfigure() on screen size changes, which deletes
and recreates the effect, we can just update the one texture that's mapped to
the screen size.
---
From the wayland commit.
>What surprises me is that BlurManager recreates for Output changes.
>That sounds like a bug in KWin (or an area which could be improved).
I had thought the same and wrote this (though wanted to have kwayland fixed first)
Test Plan:
Logged in and out (my screen resizes on startup due to scaling)
Tested on my X machine by turning a screen off. Nothing broke, plasma
panels looked the same.
Note: Eike tried this patch last week and claimed kwin still crashed.
We don't have a backtrace so it could have been something unrelated,
applied wrong or that he was deliberately lying to wind me up.
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7877
Summary:
Similar to the Blur patch. Arguably rven less reason as this doesn't
have a texture the size of the workspace.
We don't need to delete and recreate the entire effect every time the
screen changes; This deletes the wayland global which causes quite a bit
of extra work for the clients.
Test Plan:
Changed resolution under X, and scale under wayland
Panel looked the same and nothing exploded
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D7937
Keeps it from loading the Svg and all the Plasma stuff (Theme etc) that comes with it on startup.
Differential Revision: https://phabricator.kde.org/D8011
Summary:
Several effects announce a support property atom on the root window. This
change forwards the KWin::Application's signal that the xcbConnection
changed to the EffectsHandler so that the effects can respond to it.
All effects which announce a support property connect to this new signal
and re-announce the property. In case the xcb connection died (future
XWayland crashing case) it is set to XCB_ATOM_NONE by that. In case the
xcb connection got created (future delayed XWayland startup) the atom is
set to the proper value.
In addition all usages of the support properties are guarded, so that no
nonesense actions are performed if the support property is XCB_ATOM_NONE.
Test Plan: Only compile tested as we don't have XFree KWin yet
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7761
Summary:
Apparently some old configs made PresentWindows register the top left
corner which does not make any sense as that's not supported by touch.
So to be sure, don't register those edges.
BUG: 383797
FIXED-IN: 5.11
Test Plan: Not tested, I'm on Wayland
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7508
Summary:
The PresentWindows effect does not hide the window to close the selected
window. Instead it moves it outside the visible area. As this is a
"special" KWin window it is on top of the stacking order and needs to be
ignored in the slideback effect.
Instead of doing a special casing for this window the effect is changed
to ignore windows outside the visible area in general. Windows outside
the visible area just don't make sense to block the slideback effect.
BUG: 381402
FIXED-IN: 5.10.4
Test Plan: Slideback works after using Present Windows effect
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D6468
