when visualPixels is not 0, this means the titlebar does
not touch an upper/lower border, thus moving that direction
is ok and protection should be sought horizontally
BUG: 322507
FIXED-IN: 4.11
REVIEW: 111573
using the actual delta this casewise causes false
preference for window snapping (less to move)
this restores the pre snap-to-content behavior
in that regard and delta isn't used for anything else.
BUG: 321325
FIXED-IN: 4.11
REVIEW: 111139
similar to maximization blocking
also ensure the user can permit configure requests
for quick tiled and maximized windows
REVIEW: 111186
BUG: 321491
FIXED-IN: 4.11
Using Xcb::Window to wrap this helper window and port all the used XLib
calls to XCB.
Also renaming the variable to m_ and camel case to follow general naming
scheme.
For all the decoration updates called from Client into the decoration we
also have a signal being emitted. So turning the pure virtual public
functions into slots means we can just connect our existing signals and
get rid off the deep function calls.
The keepAbove/Below signals are changed to take a boolean argument as
needed by KDecoration and a few emitted signals are moved to a better
fitting location.
REVIEW: 110335
Uses widgets/translucentbackground as FrameSvg item to ensure that we
don't get a huge black square on the screen.
When bordering a screen edge we disable the border except if all edges
are bordered. This makes a little bit more clear in the quick tiling case
what will be the geometry.
REVIEW: 110176
It's not a typical singleton as the ctor is not taking a Workspace* and
needs addtional data to be passed to NETRootInfo.
All the initialization code is moved to RootInfo::create() and the tear-
down code is moved to RootInfo::destroyed(). This includes the support
window which used to be a member of Workspace. It's only needed by
RootInfo, so there is no need to have the ownership inside Workspace.
Instead of using a QWidget we just create a normal window through xcb.
It gets destroyed again in the tear-down code after the RootInfo got
destroyed.
REVIEW: 110238
Main motivation for this change is that it's unhandy to have the class
definition in workspace.h and client.h while the implementation is in
events.cpp although nothing in events.cpp uses it directly.
By getting it out of workspace.h we get the header a little bit smaller
which should improve compile time given that it's included almost
everywhere.
In events.cpp the enum usage is changed to NETWinInfo as that's the class
where they are defined.
RootInfo does no longer hold a workspace pointer. Where it's needed it
uses the singleton accessor of Workspace.
REVIEW: 110199
Overall all notifications except compositing suspended by DBus were
configured by default to not have any action. This means all the time we
emit a notification we keep DBus and KDED busy for nothing.
All the cases when a notification is triggered ire also exported to
KWin scripting, so if one really needs to handle something in case a
window is moved, it could be done through a KWin script with much more
context about the event.
REVIEW: 110113
BUG: 258097
FIXED-IN: 4.11
Following the approaches of other split out functionality Screens is a
singleton class created by Workspace.
The class takes over the responsibility for:
* screenChanged signal delayed by timer
* number of screens
* geometry of given screen
* active screen
* config option for active screen follows mouse
The class contains a small abstraction layer and has a concrete subclass
wrapping around QDesktopWidget, but the idea is to go more low level and
interact with XRandR directly to get more detailed information.
All over KWin the usage from QDesktopWidget is ported over to the new
Screens class.
REVIEW: 109839
Instead of calculating the screen number each time screen() is invoked,
the screen number gets stored in a private member variable and evaluated
whenever either the screen count changes or the Toplevel's geometry
changes. During move/resize the screen property doesn't get updated. The
update is delayed till the end of the move/resize operation.
REVIEW: 109715
and btw. replace legacy "ignoreposition" by "ignoregeometry"
this will allow to use "apply initially" as "force" used to act
(ignore position on placement) and "force" to prevent clients
from reconfiguring themselves (to not break a tabgroup or to just
not be annoying)
BUG: 311720
CCBUG: 252314
REVIEW: 109691
FIXED-IN: 4.11
REVIEW: 103948
BUG: 91703
BUG: 299245
FIXED-IN: 4.11
- The setting is ignored, the decoration always gets a "true" for it
- moving a maximized window requires breaking a "strong" snap (1/16 of screen height - unless you use quick maximization)
- all snapping is done towards the client, not the frame
- QuickTileMode is exported to the decoration (just as the maximizeMode) so that it can fix the bordersize alongside that.
Where possible it is changed to Cursor::pos(), where we cannot use the
Cursor class (e.g. Aurorae) we can at least try to limit the usage to
prevent roundtrips to the X server.
REVIEW: 109178
The Client::cursor property is changed from QCursor to Qt::CursorShape
and renamed to m_cursor (as all usages are adjusted).
This property is mostly used to define the cursor on e.g. the extended
deco border window. To make this easier a XDefineCursor replacement is
added to xcbutils.h both as a static method and as a member function to
Xcb::Window.
A window can be "maximized" despite it's position is fixed.
Most obvioulsy for a corresponding of "0", but also in other
cases. The window can still be resized, some size is the
maximum one and there's no reason to prevent the shortcut of
this state.
BUG: 314392
REVIEW: 108789
FIXED-IN: 4.11
Using Xcb::Window to manage the xcb_window_t and simplify the code - no
longer need to check whether the input_window is valid before calling e.g.
map, as that's handled in Xcb::Window.
One XLib usage for setting cursor is still present. This will be ported
once all the QCursor::handle() get removed.
REVIEW: 108771
In fact it already used to be a Singleton as there is just one object
hold by the Singleton Workspace. So let's make it a proper Singleton
following our kind of standard approach of having a ::create factory
method called from Workspace ctor and a ::self to get to the singleton
instance.
This rewrite is mostly motivated by the need to handle multi screen
setups correctly. That is have edges per screen and not for the combined
geometry. Also porting from XLib to XCB has been a motivation for the
rewrite.
The design of the new ScreenEdge handling is described in the
documentation of ScreenEdges in screenedge.h.
In addition the following changes have been performed:
* move configuration from Options to ScreenEdge
* add screen edge information to Workspace::supportInformation (obviously
replaces what had been read from Options)
* have Workspace hold a pointer to ScreenEdges instead of an object
* forward declaration of ScreenEdges in workspaces.h, this explains the
seemingly unrelated changes of just another include in some files
BUG: 290887
FIXED-IN: 4.11
Quick tiling/maximizing of Clients is completely independent of the
screen edges functionality. That is it determines the borders itself.
Nevertheless there has been some code still around which interacted with
the screen edges each time a window was moved. This code is completely
useless.
when eg. vertically maximizing a cinemascope video in mplayer
it would horizontally exceed the (16:9) screen, so this
case is translated to a full maximization (effectively binding
the window into screen dimensions)
also, when restoring such video from a horizontal maximization
the restore would usually keep the height (thus breaking the
window aspect) so pass geom_restore -> restore through adjustedSize()
REVIEW: 108702
The ownership for virtual desktops is moved from Workspace into a new
VirtualDesktopManager. The manager is responsible for providing the count
of virtual desktops and keeping track of the currently used virtual
desktop.
All methods related to moving between desktops are also moved from
Workspace to the new manager, though all methods related to Clients on
Virtual Desktops remain in Workspace for the time being. This is to have
the new manager as independent from KWin core as possible.
An rather important change for the handling of virtual desktops is that
the count and the id of a desktop is now an unsinged integer instead of
an integer. The reason for that is that we cannot have a negative count
of desktops as well as it is not possible to be on a desktop with a
negative identifier.
In that regard it is important to remember that a Client can be on a
desktop with a negative identifier. The special value for a Client being
on all desktops is handled by using -1 as a desktop. For the time being
this is not adjusted but instead of comparing the virtual desktop ids one
should prefer to use the convenient methods like isOnDesktop and
isOnAllDesktops. This would allow in future to internally change the
representation for on all desktops.
the patch omit them while the user just moves around a window
and adds one that got lost with the deferred XMoveResize patch, causing
BUG: 312346
FIXED-IN: 4.10
REVIEW: 108013
the patch omit them while the user just moves around a window
and adds one that got lost with the deferred XMoveResize patch, causing
BUG: 312346
FIXED-IN: 4.10
REVIEW: 108013
The two methods:
* place
* placeSmart
have only forwarded the call to the Placement object. Now that Placement
is a singleton there is no need to have them. Every user can call them
directly without going over Workspace.
It is more Placement related and does not really fit into geometry given
that it only calls methods on Placement. It probably only was inside
Workspace due to being part of the DBus interface. The DBus methods are
used by external components so it needs to stay.
The DBus Wrapper is now calling the methods on the singleton Placement
directly, so no need in Workspace anymore.
This implements an optimization similar to one in compiz which defers updating
the backing X window during a window move until the move is terminated. This
helps alleviate some choppiness when using composite + vsync.
REVIEW: 107256
The Compositor class actually behaves like a Singleton so it should be
one. Therefore four static methods are added:
* self() to access the Singleton
* createCompositor() to be used by Workspace to create the instance
* isCreated() to have a simple check whether the Singleton is already
created
* compositing() as a shortcut to test whether the compositor has been
created and is active
The isCreated() check is actually required as especially Clients might
be created and trying to access the Compositor before it is setup.
For most actions where the compositor needs to perform an action
(e.g. scheduling another repaint) signals were already emitted.
So it's easier to just connect the signals to the Compositor
which in turn makes the code much more readable.
All signals are connected from the Workspace when either the
Compositor gets constructed or a Toplevel gets created.
All Workspace functions which were implemented in the file composite.cpp
were moved to an own class Compositor. The header entries were moved as well.
All functions calls are updated.
As discussed on the mailinglist [1] the tiling support is
removed from KWin. The main reasons for this step are:
* it is unmaintained
* it is a mode not used by any of the core KWin team
* original developer said at Akademy 2012 that he is not
interested in picking up the work again
* tiling has quite some bugs, e.g. multi screen not supported
* is conflicting with other concepts in KWin, e.g. activities
There is ongoing work to get tiling supported through a KWin
script, which is a preferred way as it does not influence the
existing C++ code base.
[1] http://lists.kde.org/?l=kwin&m=133149673110558&w=2
BUG: 303090
FIXED-IN: 4.10
REVIEW: 105546
The common usage of stacking order is to loop through
the list and find a specific Client. All these usages
still need to find a Client. For that the loops are
adjusted to first cast the Toplevel into a Client and
continue if the current item is no Client.
At the moment all entries in the stacking order should
still be Clients as the Deleted are not yet added.
ratio:
it's the same preference in isFullScreenable, allows clients which do not withdraw their
restrictions (like aspect etc.) or get fullscreen artificially (like through kstart) to start in
"real" fullscreen mode.
BUG: 146741
REVIEW: 104331
This patch adds a new function Toplevel::addLayerRepaint, that in contrast
to addWorkspaceRepaint does not invalidate every blur texture cache that
overlaps with that region. As the name suggests it rather invalidates the
to the window associated layer at that position. This is especially useful
in the case of move/resize events in combination with oxygen-transparent,
where the altered window is almost always the topmost window and the blur
texture cache of the windows underneath are unchanged.
For the case of fully opaque windows the behaviour of addLayerRepaint
and addWorkspaceRepaint should be same.
REVIEW: 103906
Behavior is now like all xinerama related options are enabled.
There seems to be no valid reasons to run multi screen without
xinerama support and even if a user would wish to do so she can
just disable xinerama in xorg.conf.
Furhtermore thanks to KWin scripting it is possible to achieve the
behavior as it used to be with the options disabled. E.g. it is
possible to span a window in fullscreen mode over all screens.
This change is in accordance to the discussion on kwin and plasma
mailinglists:
http://mail.kde.org/pipermail/plasma-devel/2012-January/018542.html
Unlike stated at several places in the code it is not difficult to
setup the connections to all Clients.
It would have been nice if the failed attempts to connect the Clients
would not have made it into the code as emitted signals which are
nowhere used. Not to mention that like in all places the signals to
inform that a state changed were emitted before the state changed was
performed.
Fixes a regression. When resize effect is available we can do a
fast resizing by only perform the resizing after the user ended
resizing the window.
REVIEW: 103363
This input-only window is used to capture events above the
client window and preventing them from reaching the client.
It is currently used to enlarge the borders by an invisible
amount, using the ExtendedBorderRegion provided by the
decoration.
It previously worked only when struts changed, this makes it work
e.g. when moving a window between desktops that have different
struts, or when sending a windows between differently sized screens.
polluted the restore geometry for unmaximizing from quick maximization when using BorderlessMax'd
CCBUG: 279529
(cherry picked from commit 5ca44bfd7dce34504ff5fdc25818470bc672e358)
also only unset max'd state when resizing, but not when moving a max'd client
BUG: 279051
CCBUG: 279529
REVIEW: 102414
(cherry picked from commit ea91e9dea63cf58fcf0d45d7e2f4783d0b70b8bb)
Conflicts:
kwin/geometry.cpp
Dragging a fullscreen window to another screen and then disabling
fullscreen keeps the window at the new screen.
BUG:261704
FIXED-IN:4.7.1
REVIEW:102103
(cherry picked from commit d35ec6d18377fd872207b88dd39f560a483bcc14)
Also to catch inner split for sure the calculation needs to be accurate.
BUG: 279774
REVIEW: 102292
(cherry picked from commit 561dac0ae1bd158563e4aa6d0f25268fbc5a97af)
Some functions and variables were given more proper names and are now
following the naming scheme. 'Redundant' naming information was also removed.
REVIEW: 102020
A build option is introduced to file CMakeLists.txt. Classes Tiling,
Tile and TilingLayouts are only built if the option is set to ON. #ifdef's
are added to the classes where functions of the excluded classes are called.
This initial commit introduces a new class Tiling. It is provided by
the files tiling/tiling.h and tiling/tiling.cpp. It covers all the
Tiling functionality which was provided by Workspace. In this initial
commit, all the functions were just moved and adjusted.
A new member variable m_tiling is introduced to Workspace, which
makes the new class Tiling accessible from Workspace.
The Tiling pointer is created in the constructor and deleted in
the deconstructor. Also a getter method tiling() is provided.
All calls from other classes are updated to use the methods in class
Tiling now.
Added a small check in Client::checkWorkspacePosition which will assure
us that no window ("client") is left in a offscreen position. this is
more a workaround than a proper fix but is the only thing we can do that
will be backportable to the 4.7 branch.
It is possible that adding this build option broke the Scripting
component. This is something that should not happen. Unfortunately
by just ifdefing everything scripting related with scripting enabled
we have build errors. These are caused by the fact that the scripting
code includes e.g. client.h through "./../client.h". At one offending
place I changed that to "client.h", but there is also a client.h in
the scripting directory.
The includes and naming of the scripting files clearly have to be fixed!
The method windowGeometryShapeChanged() from the class Scene is now a slot. It is now connected to the signal geometryShapeChanged() which is sent from Toplevel instances Client and Unmanaged.
All direct method calls were deleted.
Since the method destroy() was called only from one location in the code
followed by update(), the funtionality has been moved to the method update()
which now takes an boolean argument 'force'. This argument is false by default
and set to true only at that location where destroy() was called formerly.
Since the functions were moved from Workspace to its own class ScreenEdge
and the functionality was formerly called ElectricWindows, the functions still
had the old names. They are now consistenly renamed without redundand naming.
The function calls were updated as well in all classes where ScreenEdge is used.
This commit change the screen edge function calls to be called in the
new class ScreenEdge. The old methods are still in Workspace and will
be removed in a further commit.
Since the funtionality of TopMenu did no longer work in KDE4 this feature was
removed from Workspace. Every reference to it was removed as well as commentaries
and documentation.
REVIEW: 101485
Drawbound was nowadays only used when compositing is disabled.
For the composited case, the drawbound was replaced by the resize
effect and in fact we should always just use the resize effect.
REVIEW: 101411
For now there is autostart support on all screens and support for different resolutions on different screens.
Keyboard shortcuts are still TODO
REVIEW: 101125
BUG: 256242
This change unduplicates some code and merges it into one class
allowing us to use an replacement effect for the outline in
future.
CCMAIL: a.arlt@stud.uni-heidelberg.de
REVIEW: 100848
The branch contains the first step in reworking the kwineffects
library. This includes:
* replacing virtuals by signals and slots
* dropping some unused methods
* remove KWin::TimeLine
More to come.
Conflicts:
kwin/workspace.cpp
First a signal is emitted when the user starts a move/resize operation.
During the move/resize operation each geometry change emits an update signal.
Last but not least a finish signal is emitted.
This eliminates the specific method for geometry updates in drawbound resize
mode.
