Summary:
So far the keyboard repeat handling was triggered directly from
KeyboardInputRedirection::processKey. With the introduction of
InputEventSpies it is no longer required to be done like that, we can
split it out into a dedicated spy.
This means that processKey only has to care about processing the key
and allows us to better extend in future. So far keyboard repeat is
only functional for libinput based platforms. But it should also be
possible to use it in nested setups. By splitting it out we can
prepare for that.
Test Plan: Auto-test using repeat still passes
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4304
Summary:
We don't want a context-menu entry to quit KWin.
T5168
Test Plan: No more context menu shown.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4299
Instead of having an expect fail on every check for the count of signals
emitted for clientStepUserMovedResized we reset after the first one which
is the actual issue.
Thus we can properly check that in the other cases the signals are
emitted.
Summary:
Our keyboard layout kcm allows to set a global shortcut to switch to a
specific keyboard layout. So far KWin/Wayland did not support those
shortcuts, only the switch to next layout shortcut was supported.
This change introduces support for custom layout shortcuts. For that
we iterate over all available layouts and check whether a shortcut is
registered. If that is the case a QAction is created and passed to
KGlobalAccel.
As the triggering code is similar to the menu, the switchLayout lambda
is split out into a dedicated method and translating the layouts is
extracted into a method.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4256
Summary:
On X11 the SNI for keyboard layout is provided by the keyboard kded.
On Wayland that kded has no real access to the layouts and cannot
properly implement switching. Given that it's better to integrate the
SNI directly in KWin.
The implementation of the SNI is largly based on the existing SNI from
plasma-desktop/kcms/keyboard. The implementation so far supports:
* Switching to next layout on toggle
* Presenting all layouts in a context menu
* Switching to a specific layout through the context menu
* Opening the keyboard layout configuration module
* scroll on SNI to switch layout
* config option whether to show the SNI
Not yet supported are:
* flags and/or short text for the layouts
The last point needs more explanation. On X11 the layout name is
something like "de" or "us". This can be directly mapped to a flag and
can be added as a short note.
Xkbcommon does not provide this information directly. Instead it provides
us the full name of the layout, e.g. "German" or "English (us)". There is
no way in the API to go from "German" to "de".
Instead we need to parse the evdev.xml file to gather all information
about layouts. This is already done in the keyboard kcm to configure
layouts. The implementation needs to be split out into a small helper
library.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4220
Summary:
If a Wayland window is decorated the decoration size was not considered
when passing touch points to the Wayland window. For pointer input this
is considered and implemented through the input transformation matrix
which KWayland::Server::SeatInterface accepts. This should also be done
for Touch. Unfortunately the frameworks version for Plasma 5.9 is already
tagged and done and we cannot depend on new API.
Thus this change tries to workaround by calculating the proper offset
through the input transformation matrix. It isn't nice but fixes the
problem for now.
BUG: 374778
Test Plan: Only in unit test, real test still missing
Reviewers: #plasma_on_wayland, #kwin
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4074
Summary:
This change adds support for marking the OnScreenMessage as it should
skip close animation. The screenshot effect is adjusted to use the
on screen message instead of the custom effect frame.
Test Plan: Message window is not captured when taking screenshot
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4091
Summary:
So far we didn't trigger modifier-only-shortcuts when capslock was
enabled. In fact we even ensured that the shortcuts did not trigger.
This seems not to be what our users expect. Meta should still trigger
if capslock is on.
This change modifies the logic to determine which modifier is currently
pressed by using the modifiersRelevantForGlobalShortcuts. The difference
to the "normal" modifiers is that this excludes capslock from modifiers
and excludes consumed modifiers. The latter is not really relevant as
modifier-only-shortcuts do not trigger if multiple keys are pressed,
which is required to have a modifier consumed.
BUG: 375355
FIXED-IN: 5.8.6
Test Plan: Only with adjusted autotest
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4241
Summary:
We had bound this to whether we use libinput as the keyboard layout
change got emitted from within our Xkb class. This class gets used
also on X11 for modifier only shortcuts.
With the latest changes the notification got split out from Xkb into
an own class which is not used on X11 any more. Thus the check is no
longer used.
By removing the check we can test the OSD in a nested setup.
Test Plan: OSD is shown when running a nested Plasma
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4244
Summary:
Xkbcommon does not localize the layout names. We always get the US
English variant. KWin so far passed the strings from xkbcommon directly
to UI visible parts such as the Plasma OSD. This results in not
translated elements in our UI.
As I figured out today the translations exist in the domain
xkeyboard-config. Passing the strings from xkbcommon through this domain
gives us translated layouts.
Unfortunately the xkeyboard-config is not installed by default on all
distributions. E.g. on ubuntu/neon one needs to install xkb-data-i18n
to have the translations available.
Test Plan: Untested as I fail to start Plasma/5.8 KWin on my dev system
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4243
This extends the testCapsLock to ensure that modifier only shortcut
trigger when capslock is enabled. So far the test only ensured that
capslock doesn't trigger the shift modifier only shortcut.
As the test shows currently when capslock is on, the meta key doesn't
trigger any more.
CCBUG: 375355
This extends the testCapsLock to ensure that modifier only shortcut
trigger when capslock is enabled. So far the test only ensured that
capslock doesn't trigger the shift modifier only shortcut.
As the test shows currently when capslock is on, the meta key doesn't
trigger any more.
This test case goes into Plasma/5.9 branch and not in Plasma/5.8 as a
fix will most likely need the new xkbcommon 0.7 code paths which we do
not have in Plasma/5.8.
CCBUG: 375355
Typically after deselecting "Show caps" option, the associated options "Cap color" and "Display image on caps" are grayed out (triggered by signal). The bug was when Desktop Cube settings were closed and opened again then the options were not grayed out.
Succesfully compiled and tested by deselecting "Show caps" option in Desktop Cube settings, closing the settings window and opening it once again. The options "Cap color" and "Display image on caps" were then grayed out.
REVIEW: 129194
Summary:
as the plasmapkg2 utility is dead, scripts and tabboxes couldn't
be installed anymore, as plasmapkg2 was launched with an hardcoded
package type (and had a bunch of custom code for it)
and no packagestructure for the relevant package types existed.
the port of scripts and tabboxes to kpackage in kwin is quite
incomplete and somewhat strange (given the fact that was started by
looking manually for the file as it couldn't link to libplasma)
this makes things a bit better as now scripts and tabboxes have an actual
package structure, making it installable by kpackagetool5.
in the future, the port should be completed and replace all the manual lookup
of files with package::filePath as it should work now given that valid
structures exist
BUG:374766
Test Plan:
tabbox plugins and kwin scripts can be installed from knewstuff
again and can be successfully loaded
Reviewers: #plasma, graesslin, subdiff
Reviewed By: #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4202
32f4e115e2 broke the test. To my
surprise there was a test using the kwin internal shortcut handling
instead of using KGlobalAccel.
This change adjusts the test to go through KGlobalAccel for testing
the global shortcut.
Summary:
So far the implementation of keyboard layout handling was split between
KeyboardInputRedirection and Xkb. KeyboardInputRedirection registered
the global shortcut and did the handling for layout switch and config
changes. Xkb did the notification on layout change.
Layout changes can nowadays be detected through an InputEventSpy. It
can only happen after a key change or an explicit layout switch. Thus
it does not need to be in Xkb anymore which allows to reduce Xkb to
only care about the Xkb keymap and state tracking.
This change introduces a new class KeyboardLayout which is an
InputEventSpy and takes over the task of the layout change notification
from Xkb and the layout management from KeyboardInputRedirection. Thus
everything related to management of keyboard layout is together in one
class.
This allows in future to add unit test to it (requires further cleanup
of Xkb to be able to use it and drop the InputRedirection dependency) and
opens the possibility to also take over keyboard layout management on X11
for the Plasma desktop.
Test Plan: Manual testing
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4135
Summary:
Instead of emitting the key state changed and modifier state changed
signals from the right point before processing the events, let's use
an InputEventSpy to do that. The spies were introduced to be called
directly before the event processing. So the contract still holds.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4128
Summary:
During the Wayland porting a KWin internal global shortcut handling got
implemented prior to the porting of KGlobalAccel. This allowed to trigger
global shortcuts with a KGlobalAccel still on X11 and unknown to KWin.
Nowadays KWin directly provides KGlobalAccel, thus it's no longer
required. The code was runtime dead as we always have a KGlobalAccel.
Reviewers: #plasma, #kwin
Subscribers: plasma-devel
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4165
Summary:
InputRedirection has a workaround to add a connect on a QAction which
is used for a global shortcut. This is specific to the X11 platform as
the xtime needs to be updated.
This change adds a new virtual method to the Platform and moves the
implementation into the X11 standalone platform. Thus it does no longer
gets called on Wayland.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4168
In case we need to set the SwitcherItem model in
`TabBoxHandlerPrivate::show()`, remember the current index row,
otherwise it gets reset to the first item.
Reviewers: #kwin, graesslin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4162
BUG: 333511
Summary:
We need this to use the new OnScreenNotification in the screenshot
effect.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D4089
Summary:
We have a comma separated list:
"".split(',') returns ""
JS decides that's worth itterating over, and we implicitly cast "" to a
number which means we register on screen edge 0 (the top).
We can't use typeof or isFinite because valid entries are still strings
at this point.
Test Plan:
Ran with default config, no longer registered on top edge
Set an edge properly in the KCM. Still worked.
Reviewers: #plasma, mart
Reviewed By: mart
Subscribers: mart, plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4113
