The common usage of stacking order is to loop through
the list and find a specific Client. All these usages
still need to find a Client. For that the loops are
adjusted to first cast the Toplevel into a Client and
continue if the current item is no Client.
At the moment all entries in the stacking order should
still be Clients as the Deleted are not yet added.
ratio:
it's the same preference in isFullScreenable, allows clients which do not withdraw their
restrictions (like aspect etc.) or get fullscreen artificially (like through kstart) to start in
"real" fullscreen mode.
BUG: 146741
REVIEW: 104331
This patch adds a new function Toplevel::addLayerRepaint, that in contrast
to addWorkspaceRepaint does not invalidate every blur texture cache that
overlaps with that region. As the name suggests it rather invalidates the
to the window associated layer at that position. This is especially useful
in the case of move/resize events in combination with oxygen-transparent,
where the altered window is almost always the topmost window and the blur
texture cache of the windows underneath are unchanged.
For the case of fully opaque windows the behaviour of addLayerRepaint
and addWorkspaceRepaint should be same.
REVIEW: 103906
Behavior is now like all xinerama related options are enabled.
There seems to be no valid reasons to run multi screen without
xinerama support and even if a user would wish to do so she can
just disable xinerama in xorg.conf.
Furhtermore thanks to KWin scripting it is possible to achieve the
behavior as it used to be with the options disabled. E.g. it is
possible to span a window in fullscreen mode over all screens.
This change is in accordance to the discussion on kwin and plasma
mailinglists:
http://mail.kde.org/pipermail/plasma-devel/2012-January/018542.html
Unlike stated at several places in the code it is not difficult to
setup the connections to all Clients.
It would have been nice if the failed attempts to connect the Clients
would not have made it into the code as emitted signals which are
nowhere used. Not to mention that like in all places the signals to
inform that a state changed were emitted before the state changed was
performed.
Fixes a regression. When resize effect is available we can do a
fast resizing by only perform the resizing after the user ended
resizing the window.
REVIEW: 103363
This input-only window is used to capture events above the
client window and preventing them from reaching the client.
It is currently used to enlarge the borders by an invisible
amount, using the ExtendedBorderRegion provided by the
decoration.
It previously worked only when struts changed, this makes it work
e.g. when moving a window between desktops that have different
struts, or when sending a windows between differently sized screens.
polluted the restore geometry for unmaximizing from quick maximization when using BorderlessMax'd
CCBUG: 279529
(cherry picked from commit 5ca44bfd7dce34504ff5fdc25818470bc672e358)
also only unset max'd state when resizing, but not when moving a max'd client
BUG: 279051
CCBUG: 279529
REVIEW: 102414
(cherry picked from commit ea91e9dea63cf58fcf0d45d7e2f4783d0b70b8bb)
Conflicts:
kwin/geometry.cpp
Dragging a fullscreen window to another screen and then disabling
fullscreen keeps the window at the new screen.
BUG:261704
FIXED-IN:4.7.1
REVIEW:102103
(cherry picked from commit d35ec6d18377fd872207b88dd39f560a483bcc14)
Also to catch inner split for sure the calculation needs to be accurate.
BUG: 279774
REVIEW: 102292
(cherry picked from commit 561dac0ae1bd158563e4aa6d0f25268fbc5a97af)
Some functions and variables were given more proper names and are now
following the naming scheme. 'Redundant' naming information was also removed.
REVIEW: 102020
A build option is introduced to file CMakeLists.txt. Classes Tiling,
Tile and TilingLayouts are only built if the option is set to ON. #ifdef's
are added to the classes where functions of the excluded classes are called.
This initial commit introduces a new class Tiling. It is provided by
the files tiling/tiling.h and tiling/tiling.cpp. It covers all the
Tiling functionality which was provided by Workspace. In this initial
commit, all the functions were just moved and adjusted.
A new member variable m_tiling is introduced to Workspace, which
makes the new class Tiling accessible from Workspace.
The Tiling pointer is created in the constructor and deleted in
the deconstructor. Also a getter method tiling() is provided.
All calls from other classes are updated to use the methods in class
Tiling now.
Added a small check in Client::checkWorkspacePosition which will assure
us that no window ("client") is left in a offscreen position. this is
more a workaround than a proper fix but is the only thing we can do that
will be backportable to the 4.7 branch.
It is possible that adding this build option broke the Scripting
component. This is something that should not happen. Unfortunately
by just ifdefing everything scripting related with scripting enabled
we have build errors. These are caused by the fact that the scripting
code includes e.g. client.h through "./../client.h". At one offending
place I changed that to "client.h", but there is also a client.h in
the scripting directory.
The includes and naming of the scripting files clearly have to be fixed!
The method windowGeometryShapeChanged() from the class Scene is now a slot. It is now connected to the signal geometryShapeChanged() which is sent from Toplevel instances Client and Unmanaged.
All direct method calls were deleted.
Since the method destroy() was called only from one location in the code
followed by update(), the funtionality has been moved to the method update()
which now takes an boolean argument 'force'. This argument is false by default
and set to true only at that location where destroy() was called formerly.
Since the functions were moved from Workspace to its own class ScreenEdge
and the functionality was formerly called ElectricWindows, the functions still
had the old names. They are now consistenly renamed without redundand naming.
The function calls were updated as well in all classes where ScreenEdge is used.
This commit change the screen edge function calls to be called in the
new class ScreenEdge. The old methods are still in Workspace and will
be removed in a further commit.
Since the funtionality of TopMenu did no longer work in KDE4 this feature was
removed from Workspace. Every reference to it was removed as well as commentaries
and documentation.
REVIEW: 101485
Drawbound was nowadays only used when compositing is disabled.
For the composited case, the drawbound was replaced by the resize
effect and in fact we should always just use the resize effect.
REVIEW: 101411
For now there is autostart support on all screens and support for different resolutions on different screens.
Keyboard shortcuts are still TODO
REVIEW: 101125
BUG: 256242
This change unduplicates some code and merges it into one class
allowing us to use an replacement effect for the outline in
future.
CCMAIL: a.arlt@stud.uni-heidelberg.de
REVIEW: 100848
The branch contains the first step in reworking the kwineffects
library. This includes:
* replacing virtuals by signals and slots
* dropping some unused methods
* remove KWin::TimeLine
More to come.
Conflicts:
kwin/workspace.cpp
First a signal is emitted when the user starts a move/resize operation.
During the move/resize operation each geometry change emits an update signal.
Last but not least a finish signal is emitted.
This eliminates the specific method for geometry updates in drawbound resize
mode.
Since clients with restricted geometry now cannot cover the entire screen by default it was necessary to unlink the state from the actual geometry to re-provide the "restore" feature.
The patch also extends the protection of the maximized state to unilateral maximizations (emacs issue)
BUG: 265568
BUG: 252314
CCBUG: 252255
review request https://git.reviewboard.kde.org/r/100606/
http://svn.reviewboard.kde.org/r/5871/
BUG: 158974
CCBUG: 252314
@Jorge:
please see the request description and check whether this allows you to fix your bug
in case, don't forget to close it ;-)
svn path=/trunk/KDE/kdebase/workspace/; revision=1208120
NOTICE that the correct solution would be to move any active FS client on top of the stack in layers.cpp but this might raise other issues.
this patch preserves the present behaviour but raises windows before setting the fullscreen. the only "issue" with this is that for setups that do not raise windows when activating them, setting an active but not risen client FS will cause a restack as sideeffect
BUG: 224600
svn path=/trunk/KDE/kdebase/workspace/; revision=1194908
When moving a window to the upper or lower quarter of a screen edge the window will be quick tiled to the responsible quarter of the screen.
Moving the window to the middle half of the screen will do the normal quicktiling to half of screen, quick maximization at top screen is unchanged.
Thanks to Arthur Arlt for his first code contribution to KDE.
See Review Request http://reviewboard.kde.org/r/5661
CCMAIL: arre2000@gmx.de
svn path=/trunk/KDE/kdebase/workspace/; revision=1190361
Every disorder causes every duration, which ensures the one that stays.
reality is relative. natural is disorder.
[R]obinhood[P]andey
Merging scripting from
^/branches/work/kwin_scripting TO
^/trunk
svn path=/trunk/KDE/kdebase/workspace/; revision=1177865
This provides a good resizing performance for users having problems with the live-updating resize.
Patch by Thomas Lübking.
svn path=/trunk/KDE/kdebase/workspace/; revision=1118714
This commit merges the kwin-tiling branch. Ideally it shouldn't break anything and add a few features ;-)
It was applied as a patch. Do not attempt to merge the branch directly, it has a few issues.
This feature is currently experimental, although it hasn't crashed in quite a long time. It lacks some features and probably leaks some memory. Fixes will be on the way.
Season Of KDE 2009 project by Nikhil Marathe
svn path=/trunk/KDE/kdebase/workspace/; revision=1118677
un-grouping windows to clientgroup.cpp. Ensures that Client::maximize(
MaximizeRestore ) is called when appropriate to avoid decoration artifacts.
BUG: 223060
svn path=/trunk/KDE/kdebase/workspace/; revision=1078877
of using electric borders just check the location of the cursor; if the
cursor is near the edge enable the resize snap. This makes the features
easier to activate, removes the conflict with desktop switching and
allows the features to be used completely on multi-screen systems.
Patch inspired by one from Marcel Schaal.
BUG: 218957
svn path=/trunk/KDE/kdebase/workspace/; revision=1071996
windows" are enabled then don't instantly restore maximized windows when
they are dragged.
BUG: 219952
svn path=/trunk/KDE/kdebase/workspace/; revision=1065887
Perhaps we should not display the totally ugly drawbound when we have an active resize effect.
CCBUG: 208770
CCBUG: 152638
svn path=/trunk/KDE/kdebase/workspace/; revision=1042711
when the window is maximized, restoring them wen it's unmaximized. will
be used for small screen setups
svn path=/trunk/KDE/kdebase/workspace/; revision=1025694
- Add hotkeys for snap left/snap right, kwin won't need a seperate hotkey for snap up, as maximize will do that job for us, and it already has a hotkey
- Add geometry restoring to quick tile, meaning that windows can be moved back to their original state after a tile, useful if just looking at something quickly.
Thanks to mgraesslin for review and lots of mentoring.
svn path=/trunk/KDE/kdebase/workspace/; revision=1022987
It is disabled by default, but if it causes problems we will enable it again. In that case the "3rd party" (netbook shell) should set the option.
BUG: 206789
CC-MAIL: notmart@gmail.com
svn path=/trunk/KDE/kdebase/workspace/; revision=1021309
Top screen edge (un)maximizes. Left screen edge sets window to left half of screen geometry, right edge to other half.
svn path=/trunk/KDE/kdebase/workspace/; revision=1021305
where the titlebar is still clickable even if it is outside the normal
work area. When struts are added or removed only move the windows that
cover the same area, leave all others untouched. If a strut is removed
on a xinerama screen that is not on the edge of the full desktop area
prevent the windows from being moved offscreen. Prevent struts/panels
from interfering with the movement of windows on other xinerama screens.
BUG: 74559
BUG: 90833
BUG: 160068
svn path=/trunk/KDE/kdebase/workspace/; revision=927466
area. Fixes placement and resizing of windows on the larger monitor of a
xinerama setup where each monitor has a different resolution.
BUG: 184348
svn path=/trunk/KDE/kdebase/workspace/; revision=926545
two monitors have different resolutions treat it as if the cursor
didn't move at all when attempting to move a window. Prevents KWin from
crashing when in this situation.
svn path=/trunk/KDE/kdebase/workspace/; revision=925355
and not be slowed down by going through compositing. Turned on and no UI option
in the naive hope that it won't cause any real problems. Maybe effects doing
window previews should get API to suspend unredirect though.
svn path=/trunk/KDE/kdebase/workspace/; revision=851742
and set by the user - they're now interchangeable. Which means
that Alt+F3/Advanced/No border can put the window decoration
back on the KRunner window regardless of what Plasma or any other
app thinks.
svn path=/trunk/KDE/kdebase/workspace/; revision=788964
being v2+ (right now it says just GPL, which according to GPL itself
means any GPL). Decoration clients will come later.
CCMAIL: kwin@kde.org
svn path=/trunk/KDE/kdebase/workspace/; revision=742302
to support XOR painting only when XRender is available. Given that
outline should be mainly used with older systems, go for a DIY Xlib-based
solution. Needs changes in decorations using it.
BUG: 149997
svn path=/trunk/KDE/kdebase/workspace/; revision=739136
window, but I don't think it really works these days, and it's probably
also not useful at all.
svn path=/trunk/KDE/kdebase/workspace/; revision=689949
The ugly side effect of this is that there are tons of static_casts in the code now... maybe it
would be better to add effectImpl() convenience method and use that?
svn path=/branches/work/kwin_composite/; revision=652348
change, repaint just triggers repaint of the area (without e.g. the texture
updating for OpenGL).
addDamage() -> addRepaint()
CCMAIL: kwin@kde.org
svn path=/branches/work/kwin_composite/; revision=632866
to hide the change from Client/Unmanaged and eventually also
act as the only API available to effects.
svn path=/branches/work/kwin_composite/; revision=626360
work in the work/kwin_composite branch.
svn merge revs 558154,558180,558236,558243,558258,562201
svn path=/trunk/KDE/kdebase/workspace/; revision=571776
besides drawing what should be drawn anyway, and there are
still some things missing like stacking order for override
redirect windows, but KWin is basically a compositing manager now.
svn path=/branches/work/kwin_composite/; revision=558168
If you want KWin to obey the app's idea of what fullscreen geometry might be
just force obeying strict geometry in the workarounds tab in window-specific
settings.
svn path=/trunk/KDE/kdebase/workspace/; revision=514433
svn+ssh://coolo@svn.kde.org/home/kde/branches/work/kde4/kdebase
.
I couldn't resolve one kicker conflict that results from different
development directions, so I rely on Aaron to sort it out - the file
is commited with conflicts
svn path=/trunk/KDE/kdebase/kwin/; revision=439627
This time at least the code should detect properly all attempts
to use shaded geometry when the normal one is needed.
BUG: 96602
svn path=/trunk/KDE/kdebase/kwin/; revision=425377
This fixes comment #10 in 96602, I don't know if it fixes as a whole,
but I'm quite sure people will complain again if not.
BUG: 96602
svn path=/trunk/KDE/kdebase/kwin/; revision=423512
