Summary:
In order to check whether a window is on some particular virtual
desktop, one has to use isOnDesktop.
Also, this change adds implicit support for the new virtual desktop protocol.
Test Plan:
Switched between virtual desktops with a Konsole window being on all
desktops.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16103
Summary:
If a window was moved to another virtual desktop, then it would be faded
in. The desired behavior is to not animate it at all.
Test Plan: Moved a Konsole window between virtual desktops, it stayed opaque.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16102
Summary:
If a modal window is closed and some alternative effect that animates
the disappearing of windows is enabled(e.g. the Glide effect, or the
Scale effect), the Dialog Parent effect can cause flickering of the
parent window because its animation duration doesn't match duration of
those alternative effects.
Also, if the Fade effect, the Glide effect, and the Scale effect are
disabled, the Dialog Parent will keep the parent window alive for no
good reason.
This change addresses that problem by adding keepAlive property to
`animate` function so scripted effects have more control over lifetime
of animated windows.
If both a modal window and its parent window are closed at the same time
(and there is no effect that animates the disappearing of windows), the
Dialog Parent will stop immediately(because windowDeleted will be
emitted right after windowClosed signal).
If both a modal window and its parent window are closed at the same time
(and there is effect that animates the disappearing of windows), the
Dialog Parent won't reference the latter window. Thus, it won't cause
flickering. I.e. it will "passively" animate parent windows.
BUG: 355036
FIXED-IN: 5.15.0
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14919
Summary:
There's an attempt to block updates to activities whilst the popup menu
is showing.
In one of the two code paths for positioning the menu the block is set
but instead of releasing the block at the end of the exec locks it
again.
CCBUG: 335725
Test Plan:
On X11 changed activities with the popup menu near the bottom.
It still flickered like crazy whilst the menu is open (see bug report)
But now at least fixes itself after
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16101
Summary:
Previously when updating the state we would send a configure event with
the size 0,0. This means the client chooses the size. For regular window
this works as most toolkits treat this to mean the size that we
previously requested. It's not explicit in the spec either way.
For maximised windows it's a problem, the spec clearly states that when
maximised clients must follow the size given. Telling the client to be
0,0 doesn't make sense.
By always sending our last requested size we remove any ambiguity.
Test Plan:
Ran
Maximised some windows and changed focus
WAYLAND_DEBUG showed we weren't sending a configure with 0,0
after startup
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16055
Summary:
This lets other effects know whether they should inhibit or not which
reduces
visual glitches of overlapping animations.
BUG: 321201
FIXED-IN: 5.15.0
Test Plan: Switched desktops, they still faded
Reviewers: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15474
Summary:
Qt does not like having no screens. Both Qt XCB and Wayland QPAs have
systems pretend there's always at least 1 screen
present.
Kwin already uses a dummy screen on startup, this patch reinserts the
dummy screen if the platform states that all real screens are removed.
BUG: 399564
Test Plan:
Logged in, everything still worked
Did not reproduce the original bug
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16096
Summary:
This code has several bugs, it's untested, it's not used anywhere, it
adds unnecessary complexity -> delete it.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16099
Summary:
The fullscreen effect lock is purely an implementation detail of the
AnimationEffect, we don't need to have it in the public API.
Test Plan: KWin still compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16075
Summary:
If one wants to drag a maximized window while he or she has enabled both
the Wobbly Windows and the Maximize effect, visual artifacts can be
shown.
When the Maximize effect animates transition from maximize to restore,
some parts of the window can overshoot repaint regions(because of
wobbliness), leaving us with the visual artifacts.
To fix that, we have to take into account current scale and translation
when calculating dirty region in the Wobbly Windows effect.
BUG: 370612
FIXED-IN: 5.14.1
Test Plan: When dragging maximized windows, there are no visual artifacts anymore.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: abetts, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15961
Summary:
The Scale effect and the Glide effect have to animate only ordinary
windows(i.e. the ones that are considered to be apps).
On X11, in order to distinguish ordinary windows from combo box popups,
popup menus, and other popups, those effects check whether given window
is managed.
On Wayland, there is no concept of managed/unmanaged windows.
XDG Shell protocol defines 2 surface roles:
* xdg_toplevel;
* and, xdg_popup.
The former can be used to implement typical windows, the ones that can
be minimized, maximized, etc.
The latter can be used to implement tooltips, popup menus, etc. Thus,
that's a good criteria to filter popup windows.
CCBUG: 398100
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: #kwin, graesslin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15117
Summary:
If a window is being slided in and for some reason it gets closed, the
window will be slided out. The problem is that there is a jump between
the slide in animation and the slide out animation.
The reason for that is we cancel the slide in animation when the slide
out animation is started.
It makes sense to cancel previously active animations because they have
different durations. But visually, it doesn't look good.
TimeLine tries to preserve progress value when changing duration. Thus,
let's utilize that to fix the jump.
This change matters only with animation speed factor > 1.0.
CCBUG: 264276
Test Plan: Manually.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: abetts, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15626
Summary:
This exposes colorScheme as a property which is then usable by kwin
scripts.
Wanted by T9769.
Test Plan:
Michail to test in a script.
Reviewers: #kwin, zzag, graesslin
Reviewed By: #kwin, zzag, graesslin
Subscribers: mvourlakos, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15913
Summary:
GammaRamp deletes an array in the destructor thus we have to either
declare our own copy constructor and copy assignment operator or
delete them both.
GammaRamp looks more like an identity rather than a value so both copy
constructor and copy assignment operator were deleted.
Test Plan: Compiles.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16023
Summary:
The change to make maximize mode asynchronous featured the comment
>Things are a bit complex with borders. Technically we
>shouldn't update them till we get a response, but we also need to have
>the correct geometry of the full size window in our request. For now
>they behave as before, updating when we request the change.
We call setNoBorder when we request the geometry but decoratedClient
also checks the maximise mode, in order to follow the scheme above we
need this to operate on the requested state not current state.
X is unaffected.
This fixes the borders being restored correct after maximize/restore.
Test Plan:
Chose a theme with visible borders
Maximised a window and back
They restored
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15991
Summary:
The function was introduced in 2d99ef918b.
It's not used anywhere plus we don't need it anymore because
AbstractClient::isActiveFullscreen checks main clients.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16022
Summary:
If the pointer is constrained all mouse events should go to the window.
Also our Alt+click. To use Alt+click nevertheless one can just unconfine
the window.
CCBUG: 399375
Test Plan: Run the adjusted autotest before and after change
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15982
Summary:
A window maximising is an async operation. We work out what size we want
the client to be, then request the client to update. The window isn't
really maximised until we get that new buffer with the new size.
This patch splits the requested, pending and current state, updating as
appropriate.
Things are a bit complex with things like borders. Technically we
shouldn't update them till we get a response, but we also need to have
the correct geometry of the full size window in our request. For now
they behave as before, updating when we request the change.
X code is untouched.
This hopefully fixes maximise animations on wayland as now we update the
geometry before emitting maximisedChanged.
Test Plan:
Maximised a window with the button and double clicking title bar.
I get only the following events on maximise/restore:
19:51:39.156 KWin::EffectsHandlerImpl::slotGeometryShapeChanged geometry
shape changed QRect(47,24 640x509) QRect(0,0 716x573)
19:51:39.157 KWin::EffectsHandlerImpl::slotClientMaximized slot client
maximised true true
19:51:40.522 KWin::EffectsHandlerImpl::slotGeometryShapeChanged geometry
shape changed QRect(0,0 716x573) QRect(47,24 640x509)
19:51:40.522 KWin::EffectsHandlerImpl::slotClientMaximized slot client
maximised false false
BUG: 382698
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: romangg, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15150
Summary:
When we want to change a client's size and position together we have to
request the client becomes a new size and only then move the window to
the new location.
Currently we process the new position the next time the buffer updates,
but with no guarantee that it has actually tried to resize/whatever yet.
The client could be providing a new buffer just because the contents
have changed.
XDGShell has an acked serial designed to keep everything precisely in
sync. A surface represents the last configure that was acked.
This patch tracks the pending position for each configure and applies it
accordingly.
WL_shell does not have this mechanism, so behaviour is kept the same as
before.
----
This is a pre-requisite to syncing maximisedState/isFullScreen with the
configure request.
Potentially we could remove the isWaitingForResizeSync checks when
resizing and it will still resize smoothly.
Test Plan:
Relevant unit test still passes with the client responding
Resized a window from the left edge with WLShell and XDGShellV6
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15135
Summary:
QOpenGLContext was changed to call platform->makeCurrent before it
called setCurrentContext.
Because we bind window FBO and ultimately that calls
QOpenGlContext::format we need Qt to know which context is current so it
can tell us the format.
This matches the QtWayland EGL code.
BUG: 399392
Test Plan:
Switched virtual desktop with the OSD (previously reliably crashed)
Now it doesn't
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15957
Summary:
With the Oxygen cursor theme, a visual glitch can appear in the
bottom-left corner of the cursor when the screen is zoomed in.
The reason for that is we're using GL_REPEAT for GL_TEXTURE_WRAP_S
and GL_TEXTURE_WRAP_T. So, when the linear filter samples neighboring
texels in the bottom, it can sample some texels from the top (because of
GL_REPEAT).
To fix that, we have to set the wrap mode to GL_CLAMP_TO_EDGE.
BUG: 338254
FIXED-IN: 5.14.0
Test Plan:
Before:
{F6303912}
After:
{F6303913}
Tried other cursor themes(Breeze and Adwaita), everything looks okay.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15949
Summary:
Check that the Sliding Popups effect grabs windows no matter in what
order it and the Scale effect are loaded.
Test Plan: Ran the test.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15729
Summary:
This means that if one opens/closes a window whilst present windows (for
example) is active we don't have two effects meddling with the opacity.
Like glide and scale this disables if it's invoked during an active full
screen effect, but it does not cancel animations that are running when a
full screen effect is launched.
Test Plan:
Windows still fade normally as before
Ran sleep ; dolphin with present windows / cube
Present windows fades windows itself so it's hard to see any difference
But it's more technically correct
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15933
Summary:
Getter is exposed as a property on scripted effect in a way that hides
pointers from the scripting side.
Setter is implicitly handled as a property of newly created animations
and holds the activeFullScreenEffect whilst any of them are active. Like
existing effects it remains up to the effect author to avoid the
problems of multiple full screen effects. The RAII lock pattern is
somewhat overkill currently, but it's the direction I hope we can take
EffectsHandler in next API break.
BUG: 396790
--
This patch is against the QJSEngine port, though it's not conceptually a
requirement.
Test Plan: Unit test
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14688
Summary:
The "Force" part in WindowForceBackgroundContrastRole and WindowForceBlurRole
is confusing. If WindowForceBlurRole is set on a window, background
behind it won't be blurred.
By setting WindowForceBlurRole we tell the Blur effect "that's fine to
do your business behind transformed windows."
The Slide effect only translates windows, it doesn't distort them, etc.
So, we can set WindowForceBackgroundContrastRole and WindowForceBlurRole
for all windows.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15707
Summary:
Full window repaints issued by the Sliding Popups effect can hide bugs in
other effects that animate the disappearing of windows (e.g. Scale).
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15822
