Summary:
Because KWin is a very old project, we use three kinds of null pointer
literals: 0, NULL, and nullptr. Since C++11, it's recommended to use
nullptr keyword.
This change converts all usages of 0 and NULL literal to nullptr. Even
though it breaks git history, we need to do it in order to have consistent
code as well to ease code reviews (it's very tempting for some people to
add unrelated changes to their patches, e.g. converting NULL to nullptr).
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson, romangg
Reviewed By: #kwin, davidedmundson, romangg
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23618
We have lots of inconsistency at the moment in CMakeLists.txt files. Most
of it is due to kwin being a very old project. This change hopefully fixes
all of it.
Summary:
QRegion::rects was deprecated in Qt 5.11. It is advised to use begin()
and end() methods instead.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22353
Summary:
The streaming buffer is shared so we have to reset it before rendering
something. Otherwise, it's basically undefined behavior.
For example, if the streaming buffer had been used for rendering a
geometry with some color, then the Background Contrast effect may crash
in GLVertexBuffer::bindArrays, it all depends on whether there is any
bounded GLShader. To fix that, the buffer has to be reset.
BUG: 356141
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19034
Summary:
KWindowSystem provides a plugin interface to have platform specific
implementations. So far KWin relied on the implementation in
KWayland-integration repository.
This is something I find unsuited, for the following reasons:
* any test in KWin for functionality set through the plugin would fail
* it's not clear what's going on where
* in worst case some code could deadlock
* KWin shouldn't use KWindowSystem and only a small subset is allowed
to be used
The last point needs some further explanation. KWin internally does not
and cannot use KWindowSystem. KWindowSystem (especially KWindowInfo) is
exposing information which KWin sets. It's more than weird if KWin asks
KWindowSystem for the state of a window it set itself. On X11 it's just
slow, on Wayland it can result in roundtrips to KWin itself which is
dangerous.
But due to using Plasma components we have a few areas where we use
KWindowSystem. E.g. a Plasma::Dialog sets a window type, the slide in
direction, blur and background contrast. This we want to support and
need to support. Other API elements we do not want, like for examples
the available windows. KWin internal windows either have direct access
to KWin or a scripting interface exposed providing (limited) access -
there is just no need to have this in KWindowSystem.
To make it more clear what KWin supports as API of KWindowSystem for
internal windows this change implements a stripped down version of the
kwayland-integration plugin. The main difference is that it does not use
KWayland at all, but a QWindow internal side channel.
To support this EffectWindow provides an accessor for internalWindow and
the three already mentioned effects are adjusted to read from the
internal QWindow and it's dynamic properties.
This change is a first step for a further refactoring. I plan to split
the internal window out of ShellClient into a dedicated class. I think
there are nowadays too many special cases. If it moves out there is the
question whether we really want to use Wayland for the internal windows
or whether this is just historic ballast (after all we used to use
qwayland for that in the beginning).
As the change could introduce regressions I'm targetting 5.16.
Test Plan:
new test case for window type, manual testing using Alt+Tab
for the effects integration. Sliding popups, blur and contrast worked fine.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18228
Summary:
The new connect syntax has several advantages over the old syntax:
(a) Connecting with the new syntax is faster;
(b) It is compile time checked.
There are still a few places where the old connect syntax is used, e.g.
connecting to QML buttons in the Desktop Grid effect.
Test Plan:
Have been testing this patch for ~2 weeks, haven't noticed any
regressions.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, broulik, graesslin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18368
Summary: For more details, see D12452.
Reviewers: #kwin, davidedmundson, fredrik, mart
Reviewed By: #kwin, davidedmundson, mart
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12466
Especially the BlurEffect::expanded() method is called a lot.
Saves creating a temporary QVector.
Differential Revision: https://phabricator.kde.org/D9101
Summary:
Similar to the Blur patch. Arguably rven less reason as this doesn't
have a texture the size of the workspace.
We don't need to delete and recreate the entire effect every time the
screen changes; This deletes the wayland global which causes quite a bit
of extra work for the clients.
Test Plan:
Changed resolution under X, and scale under wayland
Panel looked the same and nothing exploded
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D7937
Summary:
Several effects announce a support property atom on the root window. This
change forwards the KWin::Application's signal that the xcbConnection
changed to the EffectsHandler so that the effects can respond to it.
All effects which announce a support property connect to this new signal
and re-announce the property. In case the xcb connection died (future
XWayland crashing case) it is set to XCB_ATOM_NONE by that. In case the
xcb connection got created (future delayed XWayland startup) the atom is
set to the proper value.
In addition all usages of the support properties are guarded, so that no
nonesense actions are performed if the support property is XCB_ATOM_NONE.
Test Plan: Only compile tested as we don't have XFree KWin yet
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7761
Summary:
Background contrast reads pixels from the framebuffer
we need to convert from compositor to framebuffer co-ordinates
when an output is scaled
Test Plan:
Ran the manual test in kwindowsystem. Moved window over dolphin.
Visually checked output
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4949
Summary:
as different windows can have different contrast region parameters,
store color matrices per window
BUG:339237
Test Plan: logout window doesn't break panel anymore
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: broulik, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5048
Summary:
The glCopyTex(Sub)Image calls are adjusted to take the per output
rendering into account. In addition contrast effect sets the model view
projection matrix in each call to ensure it's on the correct screen.
Blur probably needs more changes for the cached texture to work, but
it's a start.
Test Plan: Blur and Background contrast work on multi-screen wayland
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3101
even if scaled or translated, if WindowForceBlurRole is set
do the blur anyways
same thing for backgroundcontrast
reviewed by: Martin Gräßlin <mgraesslin@kde.org>
Following the approach how it's done for X11: only create the interface
if the shader succeeded to compile and remove support again if it failed
to compile after a reconfigure.
REVIEW: 125444
Instead of getting size from displayWidth() and displayHeight() use
the information we have from Screens. This means there is only one
place to have the information and by that we can ensure that all
components use the same data to rely on. displayWidth/displayHeight
seem to provide the wrong information when unplugging an output
without disabling the output. This results in rendering artefacts.
But KWin::Screens has the correct information available.
All KCMs and KWin core use the BuiltInEffects namespace to find and
interact with the effects. There is no information left in the desktop
file which are of usage. Thus they can be removed.
This method replaces the X-KDE-ORDERING property in the Effect's desktop
files. This change is a preparation step for integrating the new Effect
Loader which doesn't read the ordering information. Thus it needs to be
provided by the Effect itself so that the EffectsHandler can properly
insert it into the chain.
Also for the built-in Effects on the long run it doesn't make much sense
to install the desktop files. And binary plugin effects will migrate to
json metadata which also doesn't have the KService::Ptr. Thus overall it
simplifies to read this information directly from the Effect.
Affected effects
* Blur and Contrast Shader to get atom name
* Glide effect for the slide atom
* startupfeedback for cursor size - read from config now and cached
* showfps used an xsync, replaced by flush
* logout effect for creating hack items
REVIEW: 116828
KWin already has a de facto OpenGL 2 dependency through QML. Combined
with the fact that the OpenGL 1 backend is basically unmaintained and
also unused, it's better to remove it for the new major release.
This change includes:
* Removal of cmake option KWIN_BUILD_OPENGL_1_COMPOSITING
* Removal of KWIN_HAVE_OPENGL_1 compile option and all code
ifdef'ed with it (partially removal of if-else constructs)
* Removal of CompositingType::OpenGL1Compositing (flags are kept
as a core flag should get introduced)
* Driver recommendation for OpenGL1Compositing changed to XRender
(should be evaluated whether the drivers can provide GL2)
* Removal of configuration option "GLLegacy"
* Removal of fooMatrix function in kwinglutils
* Removal of ARBBlurShader
* Removal of legacy code path in GLVertexBuffer
* Removal of GLShaderManager::disable
* if-blocks with ShaderManager::instance()->isValid() removed
REVIEW: 116042
Rational behind this change is that displayWidth and displayHeight are
X specific API calls in kwinglobals. For the future it's easier to only
rely on functionality which goes through the EffectsHandler API which
allows easier adjustments in KWin core.
displayWidth() and displayHeight() are only used to get the size or the
complete rect of all screens. This is also provided by:
effects->virtualScreenGeometry() or
effects->virtualScreenSize()
REVIEW: 116021
