when the option changes, the compositor needs to update
the state as it will later not act (in the disabled case)
and should to reflect the option change.
REVIEW: 111867
BUG: 322633
FIXED-IN: 4.11
The behavior for creating a pixmap for a window is moved from Toplevel
into a dedicated class WindowPixmap. Scene::Window holds a reference to
this class and creates a new WindowPixmap whenever the pixmap needs to be
discarded. In addition it also keeps the old WindowPixmap around for the
case that creating the new pixmap fails. The compositor can in that case
use the previous pixmap which reduces possible flickering. Also this
referencing can be used to improve transition effects like the maximize
windows effect which would benefit from starting with the old pixmap.
For XRender and OpenGL a dedicated sub-class of the WindowPixmap is
created which provides the additional mapping to an XRender picture and
OpenGL texture respectively.
BUG: 319563
FIXED-IN: 4.11
REVIEW: 110577
This was currently basically broken:
* Screen number got always attached
* openGLIsBroken did not check for screen number
-> KCM reported "everything is fine" while it wasn't
Now changed to:
* only attach screen number if it is a multi-head setup
* use same logic in both Composite and CompositingPrefs
Still problematic:
* kcm is not multi-head aware so it will report everything is fine in
case of a broken multi-head setup
REVIEW: 110631
We always reset with the complete window geometry, so the subtracting
doesn't make any sense. We can just always set the damage to an empty
region.
REVIEW: 110438
The CM selecton withdraw delay was introduced to mostly unburden
plasma from recreating the theme on temporary changes, but since
plasma also watches some properties hinting supported features
and acts in consequence, this isn't sufficient and actually causes
two theme changes instead of one in the case of a regular suspend
REVIEW: 110232
CCBUG: 179042
stealing it from ourself is reported to be able
to confuse KWindowSystem about the state.
Also it causes minor but unnecessary overhead.
REVIEW: 110231
CCBUG: 179042
Overall all notifications except compositing suspended by DBus were
configured by default to not have any action. This means all the time we
emit a notification we keep DBus and KDED busy for nothing.
All the cases when a notification is triggered ire also exported to
KWin scripting, so if one really needs to handle something in case a
window is moved, it could be done through a KWin script with much more
context about the event.
REVIEW: 110113
BUG: 258097
FIXED-IN: 4.11
The define KWIN_SINGLETON adds to a class definition:
public:
static Foo *create(QObject *parent = 0);
static Foo *self() { return s_self; }
protected:
explicit Foo(QObject *parent = 0);
private:
static Foo *s_self;
There is an additional define KWIN_SINGLETON_VARIABLE to set a different
name than s_self.
The define KWIN_SINGLETON_FACTORY can be used to generate the create
method. It expands to:
Foo *Foo::s_self = 0;
Foo *Foo::create(QObject *parent)
{
Q_ASSERT(!s_self);
s_self = new Foo(parent);
return s_self;
}
In addition there are defines to again set a different variable name and
to create an object of another inheriting class.
All the classes currently using this pattern are adjusted to use these
new defines. In a few places the name was adjusted. E.g. in Compositor
the factory method was called createCompositor instead of create.
REVIEW: 109865
Many headers included KLocale to use i18n and co. But those methods are
defined in KLocalizedString and not in KLocale.
With KF5 klocale.h does no longer include KLocalizedString causing lots
of compile errors.
either by
- forcing fullrepaints unconditionally
- turning a repaint to a full one beyond a threshhold
- completing the the backbuffer from the frontbuffer after the paint
BUG: 307965
FIXED-IN: 4.10
REVIEW: 107198
With Qt5 QCursor does no longer provide ::handle() which was used to
set a cursor on a native XWindow for which we do not have a QWidget.
Also KWin has had for quite some time an optimized version to get the
cursor position without doing XQueryPointer each time ::pos() is called.
These two features are merged into a new class Cursor providing more or
less the same API as QCursor.
In addition the new class provides a facility to perform mouse polling
replacing the implementations in Compositor and ScreenEdges.
For more information about the new class see the documentation for the
new class in cursor.h.
The comment says it all: update all settings which can be done through
the compositing KCM. Years ago screen edges was in the composite KCM, but
it no longer is. So there is no need to update the edges when the
compositing settings changes.
Use WindowAttributes and WindowGeometry everywhere where the xcb commands
had already been used.
Introduces another wrapper for overlay window and a subclass for query
tree which also wrapps the children command.
The ownership for virtual desktops is moved from Workspace into a new
VirtualDesktopManager. The manager is responsible for providing the count
of virtual desktops and keeping track of the currently used virtual
desktop.
All methods related to moving between desktops are also moved from
Workspace to the new manager, though all methods related to Clients on
Virtual Desktops remain in Workspace for the time being. This is to have
the new manager as independent from KWin core as possible.
An rather important change for the handling of virtual desktops is that
the count and the id of a desktop is now an unsinged integer instead of
an integer. The reason for that is that we cannot have a negative count
of desktops as well as it is not possible to be on a desktop with a
negative identifier.
In that regard it is important to remember that a Client can be on a
desktop with a negative identifier. The special value for a Client being
on all desktops is handled by using -1 as a desktop. For the time being
this is not adjusted but instead of comparing the virtual desktop ids one
should prefer to use the convenient methods like isOnDesktop and
isOnAllDesktops. This would allow in future to internally change the
representation for on all desktops.
If a section of comments consists of a list of links and all are broken
it's a sign that nobody has used these comments for a long time...
REVIEW: 107933
Use XDamageReportNonEmpty instead of XDamageReportRawRectangles.
In XDamageReportNonEmpty mode the server generates a single damage
event when the damage state transitions from not-damaged to damaged.
When the compositor is ready to paint the screen, it requests the
damage region for each window and resets the state to not-damaged.
With XCB we can request the damage regions for all windows in a
single roundtrip, making this the preferred mode.
This should reduce the number of wakeups and the time spent
processing damage events between repaints.
When turning off the compositor do not release the compositor selection
directly but delay it through a timer. The idea is that the internal
change when e.g. restarting the compositor or switching from XRender to
OpenGL should not be visible to the outside world.
This hopefully makes restarting the compositor more robust in Plasma due
to the SelectionWatcher sometimes reporting incorrect results.
When restarting KWin the change does not matter as the selection gets
force claimed by the new instance anyway.
CCBUG: 179042
REVIEW: 106844
The CompositingType enum turns into flags and two new values are
introduced: OpenGL1Compositing and OpenGL2Compositing.
Those new values are or-ed to OpenGLCompositing so that a simple check
for the flag OpenGLCompositing works in case of one of those two new
values. To make the generic check for OpenGL compositing easier a method
in EffectsHandler is introduced to just check for this.
The scenes now return either OpenGL1Compositing or OpenGL2Compositing
depending on which Scene implementation. None returns OpenGLCompositing.
SceneOpenGL turns into an abstract class with two concrete subclasses:
* SceneOpenGL1
* SceneOpenGL2
It provides a factory method which first creates either the GLX or EGL
backend which is passed to a static supported() method in the concrete
sub classes. These method can test whether the backend is sufficient to
be used for the OpenGL version in question. E.g. the OpenGL 2 scene
checks whether the context is direct.
The actual rendering is moved into the subclasses with specific OpenGL 1
and OpenGL 2 code. This should make the code more readable and requires
less checks whether a Shader is bound. This is now known through the
Scene: the OpenGL1 scene will never have a shader bound, the OpenGL2 scene
will always have a shader bound.
To make this more reliable the ShaderManager is extended by a disable
method used by SceneOpenGL1 to ensure that the ShaderManager will never
be used. This also obsoletes the need to read the KWin configuration
whether legacy GL is enabled. The check is moved into the supported
method of the OpenGL2 scene.
REVIEW: 106357
The new methods suspend and resume are meant to provide a better way to
influence the current compositing state than toggleCompositing. In
addition an overload setCompositing(bool) is added. The resume method is
implemented in a way that it can be used to try to start the compositor
again in case it failed.
Internally the method suspendResume is dropped as it does the same as
setCompositing just with inverted binary logic and worse name. The
compositingToggled signal is now emitted from within setup and finish to
ensure that especially the compositingToggled(true) signal is only
emitted if the Compositor could start.
Also the updateCompositingBlocking is adjusted to use the new dedicated
suspend and resume methods instead of the toggle method.
REVIEW: 106273
Two new interfaces are introduced:
* org.kde.kwin.Compositing
* org.kde.kwin.Effects
The Compositing interface is generated from scriptable elements on the
KWin::Compositor class and the Compositor is exported as /Compositor.
It provides the general Compositing related D-Bus methods like whether
the compositor is active and toggling and so on.
The Effects interface is generated from scriptable elements on the
KWin::EffectsHandlerImpl class and the instance is exported as /Effects.
It provides all the effects related D-Bus methods like loading an effect
or the list of all effects.
This removes the need to have all these methods provided on the global
org.kde.KWin interface. For backwards compatibility they are kept, but
no longer provided by the Workspace class. Instead a new DBusInterface
is generated which wrapps the calls and delegates it to one of our three
related Singleton objects:
* Workspace
* Compositor
* EffectsHandlerImpl
The Compositor class actually behaves like a Singleton so it should be
one. Therefore four static methods are added:
* self() to access the Singleton
* createCompositor() to be used by Workspace to create the instance
* isCreated() to have a simple check whether the Singleton is already
created
* compositing() as a shortcut to test whether the compositor has been
created and is active
The isCreated() check is actually required as especially Clients might
be created and trying to access the Compositor before it is setup.
The refactoring of Compositor starting with b1739c3 caused some
regressions due to variables in Workspace and Compositor not
being initialized. Furthermore there was a boolean logic error
in PaintRedirector causing the decorations not to paint.
BUG: 305875
