Summary: Fixes the build with D8705
Test Plan: Just adds includes, I wonder if it should go into Plasma/5.8 and /5.11 too
Reviewers: #plasma, davidedmundson
Reviewed By: #plasma, davidedmundson
Subscribers: graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8706
Summary:
Several effects announce a support property atom on the root window. This
change forwards the KWin::Application's signal that the xcbConnection
changed to the EffectsHandler so that the effects can respond to it.
All effects which announce a support property connect to this new signal
and re-announce the property. In case the xcb connection died (future
XWayland crashing case) it is set to XCB_ATOM_NONE by that. In case the
xcb connection got created (future delayed XWayland startup) the atom is
set to the proper value.
In addition all usages of the support properties are guarded, so that no
nonesense actions are performed if the support property is XCB_ATOM_NONE.
Test Plan: Only compile tested as we don't have XFree KWin yet
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7761
Summary:
By changing all kcfg to have arg="true" we can pass in the same
KSharedConfigPtr into all effects. This allows to have fake config in
the tests and in the planned effect demo mode.
Also it means that we don't have to hardcode the name kwinrc into the
files. In the configs - where we cannot access the effectshandler - we
use the define KWIN_CONFIG which gets generated based on the compile
time arguments.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3571
Summary:
The effect unset the WindowClosedGrabRole unconditionally if it does not
manage the window. This results in any grab set by other effects to break.
BUG: 376609
FIXED-IN: 5.9.5
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5225
Summary:
When windows get added some effects grab the window and want to be the
only one animating this window. For this the grab roles exists. An
effect being notified later on evaluates the grab state and does not
start the animation.
This process failed due to being dependent on the order the effects are
loaded. Window Added/Closed are signals emitted by EffectsHandler, thus
first come, first serve. The requested effect order does not play into
it.
Due to that it could happen that an Effect which should not animate,
started to animate as the grab was still there.
This change adds the possibility to be notified whenever the window data
changes. A new signal is added to EffectsHandler which is emitted
whenever the windowData changes. The interested effects connect to it
and cancel their (just started) animation for the window.
Adjusted effects are:
* ScaleIn
* Fade
* WobblyWindows
In case of WobblyWindows an additional logical error was fixed that the
animations were only run when an effect grabbed instead of the other way
around.
BUG: 336866
FIXED-IN: 5.8.4
Reviewers: #kwin, #plasma, broulik
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3211
Summary:
With this change SlidingPopups is able to animate Wayland clients
properly, though windowHidden does not yet work for OpenGL based
windows (buffer seems to get lost somewhere).
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2085
In addition it's required to keep the expandedGeometry alive until
the effects handled the deletion
BUG: 318322
BUG: 320892
BUG: 344359
REVIEW: 126323
FIXED-IN: 5.6
If the property changes the animation data is updated. As the last
property change event will definately be delivered before an unmap notify
we can be sure that the animation data is up to data. Reading the
property again does not have any advantages.
By removing it we get rid of at least one roundtrip to the X Server and
it fixes one failed GetProperty error when it tries to read the property
for an already destroyed unmanaged.
REVIEW: 117431
This seems like a more proper fix for the flickering issue in the
sliding popups effect. The problem is that slidingpopups grabs the
window in windowClosed, the fade effect checks it there, which makes
it racy.
In my tests, I've not seen this problem with the WindowAddedGrab, but
as far as I understand, the problem may well be present there as well.
(And my proposed trick doesn't work.) I've not seen this happening in my
debugging, however. The problem there is also less visible since the
transparency curves go into the same direction, and are more "in line
with each other".
So, fix: Move the setData(WindowClosedGrabRole, ...) call from
windowClosed into windowAdded, which makes sure it's set whenever the
window goes away.
REVIEW:115903
BUG:329991
This fixes the sliding popups losing their contrast effect when
animating, less flicker.
In this patch, we temporarily force the contrast effect on, but only if
it hasn't been explicitely disabled. As soon as the animation stops, the
force flag is disabled again. For disappearing windows, we just set the
flag in the same way, but skip over the bookkeeping, since the window is
going to be deleted, anyway.
REVIEW:115902
As all effects have always been compiled into the same .so file it's
questionable whether resolving the effects through a library is useful
at all. By linking against the built-in effects we gain the following
advantages:
* don't have to load/unload the KLibrary
* don't have to resolve the create, supported and enabled functions
* no version check required
* no dependency resolving (effects don't use it)
* remove the KWIN_EFFECT macros from the effects
All the effects are now registered in an effects_builtins file which
maps the name to a factory method and supported or enabled by default
methods.
During loading the effects we first check whether there is a built-in
effect by the given name and make a shortcut to create it through that.
If that's not possible the normal plugin loading is used.
Completely unscientific testing [1] showed an improvement of almost 10
msec during loading all the effects I use.
[1] QElapsedTimer around the loading code, start kwin five times, take
average.
REVIEW: 115073
That's what you get for changing code you cannot properly test. The
calculation was completely messed up. Now reads the correct byte size
for the byte array. In addition the usages in the effects are improved
to cast the data into the proper uint32_t values instead of the more
generic long. After all if the format is 32, the length is 32 and not
a long.
* "" needs to be wrapped in QStringLiteral
* QString::fromUtf8 needed for const char* and QByteArray
* QByteArray::constData() needed to get to the const char*
Animation now completely based on the expandedGeometry which includes the
shadows and another repaint at the end of the animation is added to
ensure that there are no leftover shadows.
BUG: 312168
FIXED-IN: 4.10
REVIEW: 108255
Instead of each effect, which needs to announce support, having custom
code to create a property and set it on the root window, there is now a
common API in EffectsHandler to take care of this.
The methods takes care of creating the atom if it has not already done
and set the property on the root window. Furthermore it allows multiple
effects to announce the same property without getting in conflict with
each other.
As a further convenience the property is automatically removed when the
effect is unloaded, so less things an effect author has to care about.
REVIEW: 107815
Finally it is possible :-) If it causes an impact on performance
during the release candidates I'm going to revert.
REVIEW: 103375
BUG: 255106
FIXED-IN: 4.8.0
Make use of new extension of protocol for magic number -1.
If offset is -1 KWin has to decide the offset. This fixes all the
incorrect animations and allows us to perform clipping again by
filtering out the window quads which should not be visible.
Additionally the effect now sanitizes the offset. That is for e.g.
Yakuake setting an offset of 0, but there is a strut on the top
corner causing Yakuake not to appear on 0, but with an offset of
the strut. Such cases are now considered as well and the animation
is fixed.
REVIEW: 103367
BUG: 287602
CCBUG: 261159
CCBUG: 278760
FIXED-IN: 4.8.0
Each effect is able to declare itself as currently being active,
that is transforming windows or painting or screen or doing anything
during the current rendered frame.
This change eliminates the hottest path inside KWin identified by
callgrind.
REVIEW: 102449
As this area was not repainted it caused visual garbage during
animationgs. Most visible with yakuake and a panel at the top.
Offset in that case is the upper screenedge while yakuake is
positioned below the panel. The area of the panel did not get
repainted causing the garbage.
CCBUG: 264765
The KWin::TimeLine class was only a small wrapper around QTimeLine
without adding anything to QTimeLine what is not present in QTimeLine.
The initial idea was to make it possible to provide more curve shapes.
This is now obsoleted by Qt shipping more useful curves with QTimeLine.
So let's clean up a little bit and use QTimeLine directly instead of
the small wrapper.
All effects are adjusted to use QTimeLine directly.
Client and Unmanaged use a signal to notify that they are about to be closed.
The EffectsHandlerImpl is connected to those signals and emits the appropriate
windowClosed signal to which the effects are connected.
All previously existing windowAdded methods are renamed to slotWindowAdded.
EffectsHandlerImpl is connected to Workspace's clientAdded signal, which is
emitted a little bit earlier than the previous direct method call. This might
change behavior.
Another signal is added to Workspace to signal that an unmanaged is added.
Since the EffectFrames have been moved into KWin core nothing in the
Effects lib actually used Plasma. The only remaining method is moved
to core as it's not used in the Effects. The Effects itself still
link against Plasma, so nothing changes for them.
The Plasma includes in the kwineffects header seemed to pull in
quite some additional headers, so the includes in some effects have
to be adjusted (most often KConfigGroup). This should speed up the
compilation of the library and the effects.
