Effects are given the interval between two consecutive frames. The main
flaw of this approach is that if the Compositor transitions from the idle
state to "active" state, i.e. when there is something to repaint,
effects may see a very large interval between the last painted frame and
the current. In order to address this issue, the Scene invalidates the
timer that is used to measure time between consecutive frames before the
Compositor is about to become idle.
While this works perfectly fine with Xinerama-style rendering, with per
screen rendering, determining whether the compositor is about to idle is
rather a tedious task mostly because a single output can't be used for
the test.
Furthermore, since the Compositor schedules pointless repaints just to
ensure that it's idle, it might take several attempts to figure out
whether the scene timer must be invalidated if you use (true) per screen
rendering.
Ideally, all effects should use a timeline helper that is aware of the
underlying render loop and its timings. However, this option is off the
table because it will involve a lot of work to implement it.
Alternative and much simpler option is to pass the expected presentation
time to effects rather than time between consecutive frames. This means
that effects are responsible for determining how much animation timelines
have to be advanced. Typically, an effect would have to store the
presentation timestamp provided in either prePaint{Screen,Window} and
use it in the subsequent prePaint{Screen,Window} call to estimate the
amount of time passed between the next and the last frames.
Unfortunately, this is an API incompatible change. However, it shouldn't
take a lot of work to port third-party binary effects, which don't use the
AnimationEffect class, to the new API. On the bright side, we no longer
need to be concerned about the Compositor getting idle.
We do still try to determine whether the Compositor is about to idle,
primarily, because the OpenGL render backend swaps buffers on present,
but that will change with the ongoing compositing timing rework.
The main advantage of SPDX license identifiers over the traditional
license headers is that it's more difficult to overlook inappropriate
licenses for kwin, for example GPL 3. We also don't have to copy a
lot of boilerplate text.
In order to create this change, I ran licensedigger -r -c from the
toplevel source directory.
This reverts commit 1747e497e4.
Unfortunately, this patch causes fall apart effect to override sliding
popups effect, which we really don't want to do.
Summary:
Currently the fall apart effect doesn't work in conjuction with window
open/close animation effects, e.g. scale. The reason for that is those
effects grab windows before the fall apart effect.
Test Plan:
* Enable the fall apart effect and the scale effect;
* Close a window.
(without this patch the window doesn't fall apart)
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: ngraham, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19723
We have lots of inconsistency at the moment in CMakeLists.txt files. Most
of it is due to kwin being a very old project. This change hopefully fixes
all of it.
Summary:
Currently code base of kwin can be viewed as two pieces. One is very
ancient, and the other one is more modern, which uses new C++ features.
The main problem with the ancient code is that it was written before
C++11 era. So, no override or final keywords, lambdas, etc.
Quite recently, KDE compiler settings were changed to show a warning if
a virtual method has missing override keyword. As you might have already
guessed, this fired back at us because of that ancient code. We had
about 500 new compiler warnings.
A "solution" was proposed to that problem - disable -Wno-suggest-override
and the other similar warning for clang. It's hard to call a solution
because those warnings are disabled not only for the old code, but also
for new. This is not what we want!
The main argument for not actually fixing the problem was that git
history will be screwed as well because of human factor. While good git
history is a very important thing, we should not go crazy about it and
block every change that somehow alters git history. git blame allows to
specify starting revision for a reason.
The other argument (human factor) can be easily solved by using tools
such as clang-tidy. clang-tidy is a clang-based linter for C++. It can
be used for various things, e.g. fixing coding style(e.g. add missing
braces to if statements, readability-braces-around-statements check),
or in our case add missing override keywords.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, apol, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22371
Summary:
The new connect syntax has several advantages over the old syntax:
(a) Connecting with the new syntax is faster;
(b) It is compile time checked.
There are still a few places where the old connect syntax is used, e.g.
connecting to QML buttons in the Desktop Grid effect.
Test Plan:
Have been testing this patch for ~2 weeks, haven't noticed any
regressions.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, broulik, graesslin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18368
Summary:
Window parts disappear very rapidly, it feels not really pleasant.
Animate also opacity so window parts disappear over time. This
makes fall apart animation more pleasant.
### Before
{F5912359}
### After
{F5912360}
Test Plan:
* Enabled fall apart effect
* Closed System Settings
Reviewers: #kwin, #plasma, #vdg, davidedmundson
Reviewed By: #kwin, #plasma, #vdg, davidedmundson
Subscribers: ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13528
Summary:
The Fall Apart effect doesn't grab windows so a conflict could happen
if an alternative window open/close animation effect is enabled(e.g.
Fade, Glide).
### Before
{F5912324}
//Fall apart and Fade conflict with each other.//
### After
{F5912325}
//Only Fall apart animates the disappearing of System Settings.//
Test Plan:
* Enabled fall apart effect and fade effect
* Closed a window
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13527
Summary:
By changing all kcfg to have arg="true" we can pass in the same
KSharedConfigPtr into all effects. This allows to have fake config in
the tests and in the planned effect demo mode.
Also it means that we don't have to hardcode the name kwinrc into the
files. In the configs - where we cannot access the effectshandler - we
use the define KWIN_CONFIG which gets generated based on the compile
time arguments.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3571
Summary:
A new method to tell the effects system whether the compositor scene
is able to drive animations. E.g. on software emulation (llvmpipe) it's
better to not do any animations at all.
This information can be used by effects to adjust their behavior, e.g.
PresentWindows could skip transitions or effects can use it in their
supported check to completely disable themselves.
As a first step all scripted effects are considered to be unsupported
if animations are not supported. They inherit AnimationEffect and are
all about driving animations.
The information whether animations are supported comes from the Scene.
It's implemented in the following way:
* XRender: animations are always supported
* QPainter: animations are never supported
* OpenGL: animations are supported, except for software emulation
In addition - for easier testing - there is a new env variable
KWIN_EFFECTS_FORCE_ANIMATIONS to overwrite the selection.
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2386
All KCMs and KWin core use the BuiltInEffects namespace to find and
interact with the effects. There is no information left in the desktop
file which are of usage. Thus they can be removed.
This method replaces the X-KDE-ORDERING property in the Effect's desktop
files. This change is a preparation step for integrating the new Effect
Loader which doesn't read the ordering information. Thus it needs to be
provided by the Effect itself so that the EffectsHandler can properly
insert it into the chain.
Also for the built-in Effects on the long run it doesn't make much sense
to install the desktop files. And binary plugin effects will migrate to
json metadata which also doesn't have the KService::Ptr. Thus overall it
simplifies to read this information directly from the Effect.
As all effects have always been compiled into the same .so file it's
questionable whether resolving the effects through a library is useful
at all. By linking against the built-in effects we gain the following
advantages:
* don't have to load/unload the KLibrary
* don't have to resolve the create, supported and enabled functions
* no version check required
* no dependency resolving (effects don't use it)
* remove the KWIN_EFFECT macros from the effects
All the effects are now registered in an effects_builtins file which
maps the name to a factory method and supported or enabled by default
methods.
During loading the effects we first check whether there is a built-in
effect by the given name and make a shortcut to create it through that.
If that's not possible the normal plugin loading is used.
Completely unscientific testing [1] showed an improvement of almost 10
msec during loading all the effects I use.
[1] QElapsedTimer around the loading code, start kwin five times, take
average.
REVIEW: 115073
* "" needs to be wrapped in QStringLiteral
* QString::fromUtf8 needed for const char* and QByteArray
* QByteArray::constData() needed to get to the const char*
This property can be used to check whether a window is currently visible
to the user, that is:
* not minimized
* on the current desktop
* on current activity
This is a common need for various effects.
REVIEW: 108341
The supportInformation is extended to also read the properties
on all effects. In addition each effect can be queried just for
itself through D-Bus, e.g.:
qdbus org.kde.kwin /KWin supportInformationForEffect kwin4_effect_blur
All effects are extended to provide their configured and read
settings through properties. In some cases also important
runtime information is exposed.
REVIEW: 105977
BUG: 305338
FIXED-IN: 4.9.1
Each effect is able to declare itself as currently being active,
that is transforming windows or painting or screen or doing anything
during the current rendered frame.
This change eliminates the hottest path inside KWin identified by
callgrind.
REVIEW: 102449
