The glVersion was not set at all for gles causing any code doing a
hasGLVersion check to fail which means that the compositor doesn't
start at all, because it has a hasGLVersion(2, 0) check.
The complete ifdef is no longer needed. The used additional glGetStringi
is also available in gles 3.0, thus epoxy can handle it quite well
without a need for ifdef.
Unfortunately the version string can be "strange" on GLES. On desktop
it looks like: "3.0 some driver foo", on GLES it could also be:
"OpenGL ES 3.0 some driver bar". Thus to make the logic work we are
first removing any leading "OpenGL ES " and hope that then the version
is encoded just like on GL.
This adds new API in ShaderManager that makes it possible to request a
shader based on a set of traits. ShaderManager generates these shaders
on demand and caches them in a hash table.
Instead of getting size from displayWidth() and displayHeight() use
the information we have from Screens. This means there is only one
place to have the information and by that we can ensure that all
components use the same data to rely on. displayWidth/displayHeight
seem to provide the wrong information when unplugging an output
without disabling the output. This results in rendering artefacts.
But KWin::Screens has the correct information available.
It doesn't make sense to convert the extension names to QStrings.
This also replaces the QString parameter in hasGLExtension() with
a QByteArray and adjusts all callers.
Remove the manually written GL dispatch code, and use libepoxy
to resolve functions.
The only exceptions are GLX_MESA_swap_control, which is not in
the XML API registry, and GL_ARB_robustness/GL_EXT_robustness.
For the latter we want to resolve the functions to the same names
on both GLES and desktop GL, and plug in our own implementations
when the extension is not supported.
* add static cleanup handlers to GLTexturePrivate and GLRenderTarget
* revert the runtime resolved features (e.g. RenderTargets are not
supported once we run the cleanup code)
* clear the extension lists
* reset the version variables
REVIEW: 117484
Adds a cleanup() method to GLPLatform which deletes the static instance.
It gets invoked from cleanupGL() in kwinglutils on tear-down of the
OpenGL backend. Thus the backend doesn't leave incorrect GL info around.
E.g. if KWin starts with llvmpipe the recommended compositor is XRender.
So the backend and the platform is created. Now KWin starts the XRender
Compositor and the GLPlatform is still valid and when trying to load the
Blur or Contrast effect this will succeed as the GLPlatform data would
allow it. But on first try to use the Effect it will fail due to no
valid OpenGL context and even crash.
REVIEW: 117480
KWin already has a de facto OpenGL 2 dependency through QML. Combined
with the fact that the OpenGL 1 backend is basically unmaintained and
also unused, it's better to remove it for the new major release.
This change includes:
* Removal of cmake option KWIN_BUILD_OPENGL_1_COMPOSITING
* Removal of KWIN_HAVE_OPENGL_1 compile option and all code
ifdef'ed with it (partially removal of if-else constructs)
* Removal of CompositingType::OpenGL1Compositing (flags are kept
as a core flag should get introduced)
* Driver recommendation for OpenGL1Compositing changed to XRender
(should be evaluated whether the drivers can provide GL2)
* Removal of configuration option "GLLegacy"
* Removal of fooMatrix function in kwinglutils
* Removal of ARBBlurShader
* Removal of legacy code path in GLVertexBuffer
* Removal of GLShaderManager::disable
* if-blocks with ShaderManager::instance()->isValid() removed
REVIEW: 116042
Completing the task of replacing all NULL to nullptr in all the files in
libkwineffects folder.
(also substituting some "0" used as nullptr with nullptr)
REVIEW: 114823
* "" needs to be wrapped in QStringLiteral
* QString::fromUtf8 needed for const char* and QByteArray
* QByteArray::constData() needed to get to the const char*
Assume that the default framebuffer has the same dimensions as the screen.
By not quering the dimensions of the viewport we don't risk serialization
in drivers that use threaded dispatch.
This reduces the size of the geometry that needs to be uploaded by
one-third, and allows kwin to take advantage of the post-transform
cache in the GPU.
Expose bindArrays(), unbindArrays() and add a draw() method that takes
an offset and a count. This makes it possible to upload geometry, call
bindArrays(), and then call draw() multiple times to draw different
subsets of the uploaded geometry.
KWin always updates the array buffer binding before it calls GL functions
that reference it, so there is never any need to reset it.
This should eliminate half the calls to glBindBuffer() while painting
the scene.
These methods make it possible to write directly into the buffer object
when building vertex arrays.
If the buffer object cannot be mapped, the map() method will return
a pointer to local memory which will be submitted to the buffer object
with glBufferData() when unmap() is called.
This overload makes it possible to upload data of an arbitrary size and
type into the buffer object. The intent is for this method to be used
to upload interleaved vertex data.
This commit also adds setVertexCount() and setAttribLayout().
The rationale for decoupling attribute specification from data uploading
is that the attribute formats and layout change less frequently than
the vertex data.
The vertex count is also specified using a separate function to enable
the caller to upload data for multiple draw calls at the same time.
Store the formats as an array in GLVertexBufferPrivate.
This simplifies the code for enabling the generic vertex arrays,
and also makes it easier to add new arrays.
Consolidate the code for binding and unbinding the vertex arrays into
two new methods called bindArrays() and unbindArrays() respectively.
This patch also removes the three paint implementations, since the only
difference between them is the code that sets up the arrays. The actual
painting code is moved into GLVertexBuffer::render(), which uses the
new methods to bind and unbind the arrays.
In case OpenGL ES 3 is provided by the driver we can use the GLSL 1.40
shaders as GLSL 300 ES shaders. The #version declarative is rewritten in
such a case.
REVIEW: 110590
Allocate enough space to hold the geometry for multiple draw calls,
and use glMapBufferRange() to gradually fill the buffer. Once the
data store is full, it's orphaned and a new one is allocated.
Store the vertex positions and texture coordinates in the same buffer
object. This saves one buffer allocation in every setData() call.
The attributes are also interleaved as they are uploaded into the buffer
to maximize locality of reference.
This patch adds a link() function, along with bindAttributeLocation()
and bindFragDataLocation().
These functions must be called after creating the program, but before
linking it.
A new ExplicitLinking flag must be passed to the constructor to prevent
automatic linking. This is to keep existing code working without
modifications.
Use glGetStringi() to list the extensions when the GL version is 3.0
or greater. glGetString() does not accept the GL_EXTENSIONS token
in an OpenGL core context.
Add an option to kcmcompositing in the 'Advanced' tab, to enable or
disable color correction. It is specified that it's experimental and it
needs Kolor Manager.
Before painting for a particular screen, ColorCorrection::setupForOutput
should be called.
A screen property is added for WindowPaintData.
In kwinglutils, The fragment shaders are intercepted before being
compiled and they get a couple of lines of code inserted in order to do
the color correction. This happens only when color correction is enabled, of
course.
For D-Bus communication with KolorServer, everything is async.
The implementation basically manages a set of color lookup tables for
different outputs and for different window regions. These are taken via
D-Bus. Each lookup table has around 700 KB.
This commit reintroduces the changes from the former merge with the
"color2" branch. In this form, it can be easily reverted.
REVIEW: 106141
This was originally added by d467fc1bdbcf69bd6ef213bd909633c2edfb6878,
to prevent alpha ending up to be 0 with blending disabled. Apparently,
that was a driver issue that is no longer present.
REVIEW: 107090
This merge is incomplete and it does not include the review number of
the associated review request. It should have been pushed as a single
commit, because the merged commits were not intended to be published in
their form.
This reverts commit dcba90263069a221a5489b1915c5cf1ca39d090c, reversing
changes made to 50ae07525c7fde07794e7548c3d6e5a69cb1a89d.
Conflicts:
kwin/scene_opengl.cpp
kwin/scene_opengl.h
If the build option is enabled KWIN_HAVE_OPENGL_1 is passed as a compile
flag when build against OpenGL.
This compile flag is meant to replace the KWIN_HAVE_OPENGLES. So far code
has been ifdefed for special behavior of OpenGL ES 2.0 and to remove
fixed functionality calls which are not available in OpenGL ES 2.0.
With this build flag the fixed functionality calls which are only used in
the OpenGL1 Compositor can be removed and keeping the KWIN_HAVE_OPENGLES
for the real differences between OpenGL 2.x and OpenGL ES 2.0.
E.g. a call like glColor4f should be in an
glColor4f(1.0, 1.0, 1.0, 1.0);
while a call like glPolygonMode should be in an
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
Building for OpenGL ES 2.0 of course implies that KWIN_HAVE_OPENGL_1 is
not defined.
The Egl backend is decoupled from the OpenGL ES build option which makes
it possible to use it as a replacement for glx.
To make this possible a new build flag is added when egl is available at
compile time and any egl specific code is now ifdefed with this flag
instead of the gles flag. In addition at runtime a windowing system enum
value is passed to the various detect methods to have egl/glx specific
detection for e.g. function pointer resolving.
By default egl is used if compiled with OpenGL ES, otherwise glx is used.
But in the non-gles case the windowing system can be selected through the
new environment variable KWIN_OPENGL_INTERFACE. Setting this variable to
"egl" the EglOnXBackend is used.
REVIEW: 106632
Results in cleaner changes.
Put all the color correction stuff from SceneOpenGL in SceneOpenGL2.
Conflicts:
kwin/eglonxbackend.cpp
kwin/glxbackend.cpp
kwin/scene.h
kwin/scene_opengl.cpp
kwin/scene_opengl.h
SceneOpenGL turns into an abstract class with two concrete subclasses:
* SceneOpenGL1
* SceneOpenGL2
It provides a factory method which first creates either the GLX or EGL
backend which is passed to a static supported() method in the concrete
sub classes. These method can test whether the backend is sufficient to
be used for the OpenGL version in question. E.g. the OpenGL 2 scene
checks whether the context is direct.
The actual rendering is moved into the subclasses with specific OpenGL 1
and OpenGL 2 code. This should make the code more readable and requires
less checks whether a Shader is bound. This is now known through the
Scene: the OpenGL1 scene will never have a shader bound, the OpenGL2 scene
will always have a shader bound.
To make this more reliable the ShaderManager is extended by a disable
method used by SceneOpenGL1 to ensure that the ShaderManager will never
be used. This also obsoletes the need to read the KWin configuration
whether legacy GL is enabled. The check is moved into the supported
method of the OpenGL2 scene.
REVIEW: 106357
The implementation consists of a class in libkwineffects.
There are some slight modifications in the compositor. Regions for
different outputs are drawn at different times.
Currently only per output color correction is implemented. However, the
grounds are prepared for implementing per window color correction
easily.
The ColorCorrection class needs to communicate via D-Bus with a KDED
module, KolorServer, which is a part of KolorManager.
The only visible part for the user consists of a check box in the
advanced tab for the compositing KCM.
The actual correction is done by injecting a piece of code in the
fragment shader, code that does a 3D lookup into a special color lookup
texture. The data for these textures is obtained from KolorServer. All
D-Bus calls are async.
Currently the GL Matrix Stack is also used with OpenGL 2.
That is pushMatrix, multMatrix and popMatrix are executed
although this does not influence the rendering at all. The
OpenGL 1 matrices are not passed to the shaders.
With this change the calls to the matrix stack are no longer
executed if the Shader based backend is used. This means we
have a few less matrix multiplications in the rendering.
Mostly affects a few effects which have not yet completely be
ported over to OpenGL 2.
BUG: 303093
FIXED-IN: 4.10
REVIEW: 105455
This makes kwin in OpenGL2 mode more coherent with kwin_gles.
Despite some fullscreen effects they should now make the same
(pure) OpenGL calls.
REVIEW: 103804
This patch adds an optional texture cache to the blur effect such that damaged windows in
front of the blurred region dont trigger a repaint of the whole blurred region which pretty
often results in a avalanche repaint of nearly the whole screen.
REVIEW: 101977
Additionally:
- hide the GLTexture implementation using dpointers
- drop the unused function SceneOpenGL::Texture::optimizeBindDamage()
- Texture::load now loads a new texture and does not update the existing one
REVIEW: 101999
I still don't understand how I actually tested my patch
before committing. It was working, sigh. That were
several hours of annoyance including a git bisect presenting
my own commit I assumed to be correct. Sigh.
If the environment variable KWIN_GL_DEBUG is set to 1
the define KWIN_SHADER_DEBUG is added to the glsl
source code allowing to add some custom ifdefed
visual debug handling.
As an example it's added to scene-fragment.glsl to
paint everything in a greenish way.
Construct window quads which will end on the screen instead of
rendering the windows several times and using scissoring to
restrict to the area which will end on screen.
REVIEW: 101765
The uniforms textureWidth and textureHeight were only needed for
normal windows. For everything else it was just 1.0/1.0, that is
normalized.
The makeArrays method is changed to produce normalized texcoords
obsoleting the need for these uniforms. So two uniforms less, one
calculation in vertex shaders less and many many lines of code
removed.
At the same time makeArrays is also adjusted to take care of
yInverted of the texture, which is needed as we no longer can use
the enableUnnormalizedTexCoords which did the yInverted transformation.
REVIEW: 101646
This was causing problems with R300G. The GPU supports only limited
GLSL and seems not to be up to rendering the scene appropriate. So
let's better disable the OpenGL 2 branch for such GPUs. If the user
really wants to use it, there is the GLES backend which does not
check for limited GLSL.
BUG: 274457
CCBUG: 274607
FIXED-IN: 4.7.0
With raster a QPixmap is no longer a XPixmap which fails all code
which assumes that an QPixmap is an XPixmap. Depending on were in
the codebase we either convert such pixmaps to images (OpenGL) or
create a XPixmap and use QPixmap::fromX11Pixmap to get a "real"
pixmap.
It is possible that there are more code pathes were we would need
a XPixmap. Currently tested is basic functionality of no-compositing,
XRender compositing, OpenGl/GLX and OpenGL ES/EGL compositing.
For OpenGL compositing raster might result in performance improvements,
for XRender it is possible that there are regressions when using raster.
By default KWin uses whatever is the default of the system, so we just
no longer enforce native.
Of course it is a bad idea to use graphicssystem OpenGL. As that
is broken anyways in Qt, we do not check for it.
Many thanks to Philipp Knechtges for bringing up the issue, convincing
me that we need it and providing most of the patch.
REVIEW: 101132
CCMAIL: Philipp.Knechtges@rwth-aachen.de
Setting option "GLLegacy" to true in config group "Compositing"
will disable all GLSL shaders and kwin uses the legacy OpenGL 1
code pathes. Obviously the option is ignored with GLES.
As my Qt Designer is refusing to work, there is no GUI option yet.
The branch contains the first step in reworking the kwineffects
library. This includes:
* replacing virtuals by signals and slots
* dropping some unused methods
* remove KWin::TimeLine
More to come.
Conflicts:
kwin/workspace.cpp
QMatrix4x4 accepts data in row-major order, but returns them in
column-major order, which is not documented and because of that
I expected them to be in row-major order.
This commit fixes it and rewrites the shaders to apply the matrix
multiplications in the right order.
REVIEW: 100759
Second part of cleaning up the lib directory: the effects library
now lives in libkwineffects/ directory.
For existing effects nothing changes as the install path is unchanged.
The change obsoletes the lib/ directory.
As glplatform.h has not yet been exported I dared to export it and
adjust the places where it is used.
CCMAIL: kwin@kde.org
