Summary: Basically just a copy and paste from the relevant Qt Wayland
parts.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D5172
Summary: We need to set the viewport so that we scale from device pixels to global compositor space.
Test Plan:
Ran kwin_wayland properly on my laptop without setting KWIN_COMPOSE.
Most things worked.
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3504
Summary:
Another regression from enabling touch support on X11.
The approach window for pointer input gets unmapped as soon as the mouse
enters the window. This ensures that mouse motion events are not stolen
from other applications. But with the touch events we did not even react
on the enter event if it's not activated for pointer. The result was an
area around the screenedge being blocked for pointer input.
This change only creates and maps the approach window if the edge is
activated for pointer input.
BUG: 378951
Test Plan:
Activated edges through pointer and touch, reconfigured and tested
motion events
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5528
Summary:
With the TabBox I observed the following issue:
1: trigger TabBox through screen edge
2: exit TabBox
3: trigger TabBox again through screen edge
Actual behavior: in step 3 the GUI does not show. If now using Alt+Tab
to show the TabBox the gui shows, but through screen edge it stays
broken.
Investigation showed that the difference is a direct show in screen edge
case and a delayed show in Alt+Tab case. Futher investigation shows that
an invalid geometry gets requested in the broken case. While this might
indicate an issue in another area it makes sense to protect KWin
internally against it and not to break rendering.
Thus this change ensures that a valid FBO does not get replaced by an
invalid sized FBO.
Test Plan:
Tested that Alt+Tab works correctly when triggered through
edge
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5438
Summary:
Grabbing the touch events seems to cause issues. It seems to also grab
pointer events from touchpad and breaks touch input on other events.
Also testing shows that we don't need it and get touch ownership events
for our screenedge windows reported.
BUG: 378951
Test Plan: Triggered touch screen edge, normal system usage on X11
Reviewers: #plasma, #kwin
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5520
Summary:
Libdrm 2.4.78 introduces a version 2 and if KWin gets built against it
our code would break. Given that this change is for Plasma/5.8 branch.
Closes T5839
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Maniphest Tasks: T5839
Differential Revision: https://phabricator.kde.org/D5380
Summary:
Cursors are drawn low level, so need to go from global compositor space
to device space
(multiplied by the out scale)
Test Plan: Elements interacted underneath where the mouse was
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3499
Test Plan:
For the first time, actually plugged in my high DPI laptop.
Tested both 1x and 2x windows on 2 real displays one high DPI, one normal
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3498
Summary:
In theory we shouldn't need to scale input, however when in windowed
mode
we need to convert the host into output normal.
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3496
Summary:
Provides a virtual method in Screens where backends can supply the scale
of each screen, this is then set on each output.
For the X windowed backend this value is taken from a command line
parameter.
Test Plan:
Ran windowed mode with --scale 1 and 2
then kate --platform=wayland from another screen.
On the latter case UI elements were scaled up correctly
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3159
Summary:
This change extends the XInputEventFilter to also listen for all touch
events on the root window.
The touch points are passed to the new gesture recognizer in screenedges.
Please note that I'm not using X11 and have hardly tested this change in
real world. To our X11 users with touch screen support: please test!
Test Plan: Can activate and deactivate the screenedge.
Reviewers: #plasma, #kwin
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D5137
Summary:
Each Edge creates a SwipeGesture for touch activation. The swipe needs to
be a single finger starting from the edge into the screen for at least
20 %. The SwipeGesture and GestureRecognizer is extended to support the
use cases of the touch screen edge swipe.
New features supported by the gesture system are:
* minimum and maximum position
* a minimum delta for the swipe
* progress signal based on the minimum delta
* starting a swipe with a start point
The Edge has the progress signal connected to its approach signal, thus
visual feedback is provided through the screen edge effect.
The screen edge system supports touch only for the edges (corners are
too difficult to activate on touch screens). At the moment the following
features are supported:
* screen edge show/raise of windows (e.g. auto hidden panels)
* trigger the configured action
* trigger the configured callback function (e.g. script)
In future it might make sense to add a touch specific configuration
action to support different actions for screen edges activated by mouse
and touch.
BUG: 370323
Test Plan:
configured a screen edge and triggered through touch,
added an auto-hiding panel and triggered through touch
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel
Tags: #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D5106
This makes clicking the application menu button trigger the menu.
CHANGELOG: Aurorae window decorations now support global menu button
BUG: 375862
FIXED-IN: 5.9.5
Differential Revision: https://phabricator.kde.org/D5130
Summary:
aurorae themes have hardoded sizes in pixels in their config files,
but the framesvgs scale by themselves based on font dpi leading
to corrupt results
scale all sizes using the same logic(that's also used in c++ based
kdecorations), gives correct looking scaled decorations
BUG:375868
Test Plan: see screenshot
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5114
Summary:
In the current code we update the shadows during the decoration paint.
Because this is called in the middle of the Scene::paintWindow and we
have already painted the shadows/built quads, the setShadow() was
deferred to avoid the obvious bugs updating the shadow would cause.
This sucks because it means we're always out by one frame, and it means
we always do two updates.
As the shadow is taken from the buffer, we can solve that problem by
updating the shadow before any painting at the same time that we update the
buffer. This means we don't need the deferring hack.
This patch also fixes a related issue that m_padding could have
changed after the buffer is rendered, but before painting. This would lead to rendering a mess.
This patch caches the relevant padding at the time the buffer is
created.
@Notmart, this is subtly different from the patch I showed you last night,
for me it fixes things without your other patch, but I don't know. If it doesn't it's
still (IMHO) a lot cleaner.
Test Plan:
Ran an Aurorae theme
Maximised, restored, resized. Everything.
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D4990
Summary:
To ease development of touchpad gestures it's useful to have support in
the nested Wayland platform.
Test Plan: Shown in Debug Console of nested KWin
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5059
The logic on page flips was inconsistent in the sense, that it should never
release a GBM buffer before it's not used (i.e. viewable on the display)
anymore. This happened unintended until now (on page flip we never really
did something useful in the else statement, because if we're here it's not
a GBM buffer anyway).
With this patch we:
* delete on page flips always only the old buffer, which is not used anymore
* release the buffer earlier on interrupts like display disconnect in order
to be able to destroy the EGL context
Test Plan:
Tested in non atomic mode (atomic mode is obsolete right now until my other
WIP patch D4539 is ready to be merged): Login, logout, suspend, normal use.
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5060
Summary:
The functionality regarding triggering modifier only shortcuts is moved
out of Xkb - where it doesn't belong to - and is turned into an input
event spy listening for the changes it is interested in. Previously
the state got queried by asking e.g. for the pressed buttons, now it's
tracked directly.
The X11 side needs a larger change due to that as now pushing the events
into Xkb does not trigger modifier only shortcuts any more. Instead the
"normal" way through the platform API needs to be used which triggers the
processing of filters and spies.
The problem here is that our redirections only process events if they are
inited and that only happens on Wayland. We cannot call init on them as
that would create all the Wayland filters and spies and processing would
probably break. As an intermediate solution the spies are now processed
and there we know that it won't matter. A future solution would be to
remove the init checks completely and just send through both filters and
spies and ensure that on X11 only the supported ones are loaded.
Closes T5220
Test Plan: Tested on Wayland and X11
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Maniphest Tasks: T5220
Differential Revision: https://phabricator.kde.org/D4578
Summary:
Increases minimum Qt version to 5.7. This allows to drop the pre-5.7
virtual keyboard and various ifdefs for now unsupported versions.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4485
Summary:
InputRedirection has a workaround to add a connect on a QAction which
is used for a global shortcut. This is specific to the X11 platform as
the xtime needs to be updated.
This change adds a new virtual method to the Platform and moves the
implementation into the X11 standalone platform. Thus it does no longer
gets called on Wayland.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D4168
Summary: This way they can be properly listed by Discover
Reviewers: graesslin, #plasma
Reviewed By: graesslin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3765
Summary: Enums taken from hardware/hwcomposer_defs.h header file
Test Plan: builds
Reviewers: #kwin, graesslin, mart
Reviewed By: mart
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3699
Summary:
HWcomposer version 1.4 introduced setPowerMode, which replaces the
blank(). This adds support for it. There are various code paths
possible,
- If KWin is built against hwcomposer 1.3 headers, then setPowerMode
code is not compiled in, and it will use blank to turn display off.
- If KWin is built against hwcomposer 1.4 headers, it will have
setPowerMode code path compiled in. It will be used only on devices with
1.4 and 1.5 version of hwcomposer.
This is slightly insane, because Android can report hwcomposer 1.5 even
when headers are of 1.4 version..
Test Plan: Tested this on Nexus 5X which reports 1.5 version of hwcomposer
Reviewers: graesslin, #plasma
Reviewed By: graesslin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3686
Summary:
This supports "grabbing" the pointer on right ctrl key just like on X11.
If the Wayland server supports pointer constraints protocol, the nested
Wayland compositor creates a confined pointer if the right ctrl key is
pressed.
On another right ctrl press the (active) constraint gets removed again.
To indicate the current state the window title gets updated. This also
implements window title support for the first time.
This change implement T4604.
Test Plan: Tested with a modified KWin with server-side pointer constraints support
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3488
Summary:
It's only needed by the GLX backend, so only find if we have GLX at all
and only link where needed. As it was handled incorrectly before, it's
now using proper ifdef.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3448
Summary:
Instead of having the egl extensions in the global kwinglutils lib it
becomes private to the AbstractEglBackend. Just like on glx the
glxextensions are moved into the platform.
The extensions are queried from initEglAPI, that is as early as possible
after initializing the EGLDisplay. This ensures that any implementing
subclass can access the extensions early enough.
As a note: the EglOnXBackend had a potentially wrong sequence for
initializing the buffer age extension. It is now moved to the correct
place where the result is needed for the first time.
From the global API eglExtensions are removed from hasGLExtension and
the eglExtensions function is dropped. As by that initEGL did not do
anything it is also dropped.
Test Plan:
Tested nested kwin on Wayland, still works, extensions shown
in debug console
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3396
Summary:
A new virtual method is added to Platform:
startInteractiveWindowSelection
The interactive window selection enters a mode where the user can select
a window through the pointer or keyboard device. The cursor is turned
into a crosshair cursor, unless another cursor name is provided (e.g.
pirate for kill window).
Once a window is selected the provided callback method is invoked with
the selected Toplevel as argument. In case the user cancelled the
selection a nullptr argument is passed in.
Currently it's only implemented by the X11 standalone platform using the
logic from KillWindow. Just instead of killing the window the callback
is invoked.
KillWindow loses the X11 implementation and interacts with the new
functionality in Platform by providing a lambda function for the
killing.
Test Plan: Killing of X11 windows is still possible
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3363
Summary:
And finally nothing inside libkwineffects, libkwinglutils,
libkwinxrenderutils and kwineffect and kwin core uses KWin::display.
We are finally XLib free!
This change drops KWin::display and removes the include to QX11Info from
kwinglobals.h. And the libraries no longer need to link X11Extras. Due
to that removal a few seeming unrelated changes are required to add the
include where needed and linkage to X11Extras.
The biggest change is to x11 platform plugin which still needs the
display and caches it in the Platform and passes it to various places in
a way that the code doesn't need to be adjusted.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3337
Summary:
KWin still resolves some OpenGL function pointers. For that it needs to
use either eglGetProcAddress or glxGetProcAddress. With other words the
method to resolve needs to know whether it is egl or glx and needs both
a dependency to egl and glx. Especially the dependency to glx is ugly as
that pulls in XLib into our library.
The way so far was to pass an enum value to the initGL method to know
whether it's EGL or GLX. With this change the enum value is removed and
replaced by a function pointer to resolve the methods.
This simplifies the resolve code and allows to completely remove the glx
variant we still had in the library. Thus kwinglutils library is now glx
and XLib free.
Test Plan: nested KWin with OpenGL/EGL still works
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3336
Summary:
This isn't used and if it was would give the wrong value.
Actual correct size can be determined via Screens object.
Test Plan:
Grepped it's not overriding anything
Compiles
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3385
Summary:
No need to resolve glx methods through the shared lib. At the moment
this duplicates some code, but will be cleaned up with a follow up
change.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3335
Summary:
Glx extensions are only interesting to the glxbackend. Given that
querying can be moved there.
In order to simplify the extensions can be stored in the OpenGLBackend
which also provides the convenience check as before.
The egl platforms should also be adjusted to query in that way and
remove it from the kwinglutils.
There is still a usage of the glxextensions inside kwinglutils to
resolve one function. That should also be moved into the platform.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3332
Summary:
Glx version is only required once in the standalone x11 platform. No
need to have that in the shared kwinglutils library.
Removes one xlib usage from shared kwin.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3329
Summary:
to uniquely identify screens (in QScreen::name()) add the conenctor
name and id (such as HDMI-A-1) to the model identification
Test Plan: tested a full plasma session
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3341
Summary:
Output scaling can't ever work on a single buffer; especially if they're
different scales and overlapping.
This ports the virtual backend to perScreenRendering so that I can use
it for
tests.
ctest fails here, but it fails on the tests that it failed on before..
Reviewers: #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D3306
Summary:
Some platforms support to hide and show the cursor. This will be needed
by e.g. the zoom effect which currently only provides this functionality
on X11.
This change introduces a new method in the Platform to hide and show the
cursor. The methods need to be called balanced and the implementation
takes care of only showing again if all hide got matched by a show.
The actual hiding and showing is performed in the platform plugins. So
far the DRM and X11/Standalone platforms implement the required
functionality, though other platforms probably could implement as well.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3119
On build.kde.org the autotests started to crash on tear down due to a
newer Wayland library. The reason is that the KWayland::Client::Outputs
are destroyed after the internal Wayland connection is destroyed.
This change parents the created Outputs to the Registry like the other
objects. To ensure that the KWin::QPA::Screen doesn't have a problem
with that, it is changed to a QPointer - nullptr checks are already in
place.
Hopefully that will fix the crashes on build.kde.org, but there is a
chance that more errors are hidden.
Summary:
With nouveau driver it can happen that KWin gets frozen when first trying
to render with OpenGL. This results in a freeze of the complete desktop
as the compositor is non functional.
Our OpenGL breakage detection is only able to detect crashes, but not
freezes. This change improves it by also added a freeze protection.
In the PreInit stage a thread is started with a QTimer of 15 sec. If the
timer fires, qFatal is triggered to terminate KWin. This can only happen
if the creation of the OpenGL compositor takes longer than said 15 sec.
In the PostInit stage the timer gets deleted and the thread stopeed
again.
Thus if a freeze is detected the OpenGL unsafe protection is written into
the config. KWin aborts and gets restarted by DrKonqui. The new KWin
instance will no longer try to activate the freezing OpenGL as the
protection is set.
If KWin doesn't freeze the protection is removed from the config as
we are used to.
Check for freezes for the first n frames, not just the first
This patch changes the freeze detection code to detect freezes in the
first 30 frames (by default, users can change that with the
KWIN_MAX_FRAMES_TESTED environment variable). This detects
successfully the freezes associated to nouveau drivers
in https://bugzilla.suse.com/show_bug.cgi?id=1005323
Reviewers: davidedmundson, #plasma, #kwin, graesslin
Reviewed By: #plasma, #kwin, graesslin
Subscribers: luebking, graesslin, kwin, plasma-devel, davidedmundson
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D3132
Summary:
There are several effects (screenshot, zoom) which need access to the
cursor image and cursor hotspot. So far these effects used X11
unconditionally to get the cursor which obviously does not work on
Wayland.
This change adds a new class PlatformCursorImage to kwinglobals which
wraps what a cursor is (image and hotspot) and adds a new virtual method
to Platform to provide such a PlatformCursorImage. By default it's the
cursor image the Platform tracks. On X11/standalone platform this new
virtual method is overriden and provides a PlatformCursorImage from X11
using the code previously used in screenshot effect.
Screenshot effect and zoom are adjusted to use the new API instead of
X11.
Test Plan:
Zoom effect tested on Wayland, now gets the proper cursor icon.
X11 functionality not yet tested.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D3093
Summary:
The modifier-only-shortcuts break as soon as KWin grabs the keyboard
(e.g. alt+tab, present windows, etc.). The investigation shows that in
that case KWin does not get any raw key events any more and thus gets
confused about the state of the hold modifiers. E.g. alt+tab has the
alt key pressed, but we miss the release as the keyboard is grabbed.
This change addresses the problem by installing an additional event
filter for key press and release event which only filters for key events
on the root window. That way we can be sure that it only operates when
KWin grabbed the keyboard on the root window.
Note: the problem only exists when grabbing on the root window. If the
grab is on another window (e.g. moving a window) we still do get all
events.
The problem also seems to not happen if another application grabbed
keys on the root window. E.g. for key combinations grabbed by
kglobalaccel the correct sequence of key press/release as raw events
are reported. Also while the screen is locked the evemts are reported
and kscreenlocker grabs the keyboard on the root window.
Test Plan:
Used Alt+Tab and Present Windows and tried to activate launcher
afterwards.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2980
This is Milestone 1 of full support of Atomic Mode Setting (AMS) and
Universal Planes in the KWin DRM backend.
With Milestone 1 we can use the primary plane of a DRM output and do an
AMS commit (this means mode setting aswell as page flipping), if the
driver supports it. Until now the functionality is only tested on Intel
graphics. You need the drm-next kernel for most recent DRM kernel
developments. As boot option set "i915.nuclear_pageflip". Additionally
at the moment AMS is still hidden behind the environment variable
KWIN_DRM_AMS. Set it, if you want to try out AMS.
What needs to be done next: Make it possible to transfer EGL buffers
directly to planes and implement logic for deciding about using a plane
or not for a specific buffer.
You can read more about it on LWN:
https://lwn.net/Articles/653071
And on Martin's blog:
https://blog.martin-graesslin.com/blog/2015/08/layered-compositing/
I used as model previous work by Daniel Stone for Weston:
https://git.collabora.com/cgit/user/daniels/weston.git
Reviewed-by: mgraesslin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2370
Summary:
SharingPlatformContext::swapBuffers needs to make the context current.
For this is calls makeCurrent. Later on this tries to bind a fbo, which
checks calls into the current QOpenGLContext. As we called makeCurrent on
our own platform context Qt doesn't know that the context is current and
returns in the worst case a nullptr and crashes.
This change calls makeCurrent on the QOpenGLContext so that Qt also knows
that this context is current now. The QOpenGLContext calls makeCurrent on
the platform context, so what our code tried to do is still being done.
In addition the method context() in AbstractPlatformContext is renamed to
eglContext to no longer shadow the method in QPlatformContext.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2582
Summary:
The raw pointer button events intercepted in the XInput2 input filter
get sent through the Platform to the PointerInputRedirection. This
makes the PointerInputRedirection track the pointer button state and
emit the signals for button changed and axis changed.
These signals are used by the modifier-only shortcut detection to
determine whether the shortcut should trigger.
On X11 the "normal" input handling doesn't use the InputRedirection
and the emitted signals are not consumed by anything else. As
PointerInputRedirection is not inited the events are not forwarded
to the input filter, thus won't be processed by other parts and
won't interfere with the normal event processing on X11.
Given that it also doesn't matter that the input filter does not
apply the left-handed setting. The internal tracking will have a
wrong mouse button, but nothing is going to do decisions based on
the value of the pressed mouse button. For the moment all we are
interested in is that a button is pressed.
Test Plan:
Pressed meta, clicked, scrolled, released meta: launcher
did not open. Pressed meta, released meta: launcher opened
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2506
BUG: 367730
Just like 4e7392b907:
the ownership of the gbm_device must be passed to the Platform as
the ownership of the EGLDisplay is also passed to the Platform and
we may not destroy the gbm_device for an EGLDisplay we are still using.
With this change I could restart the OpenGL compositor successfully
and switch from OpenGL 3.1 to OpenGL 2 without a crash or rendering
issues.
The Egl backend opens the drm device and creates a gbm_device from it.
From that it creates the EGL device. The EGL device outlives the EGL
backend (e.g. for compositor restart). So far the EGL backend destroyed
the gbm_device when going down which mesa did not like at all when a
new context got created on that EGL device.
Thus the ownership of gbm_device is also passed to the Platform so that
the compositor can be restarted.
This makes the TestSceneOpenGL no longer crash during the restart
compositor test.
At the same time the xinput2 integration is split out of X11Cursor
and made a standalone part of the platform plugin. XInput integration
is nowadays not only used by the cursor position polling, but also
for modifier only shortcuts.
By splitting it out the modifier shortcuts start to work also when
one doesn't have anything requesting a mouse position polling.
This also simplifies the conditional builds: xinput integration is
only included if we have support for it at compile time without having
to have many ifdefs in the cursor implementation. For the inclusion of
cursor in the kcmkwin this also removes all the ifdefs.
The key events are only requested if we have xinput 2.1. Otherwise we
would not get all raw events if the input device gets grabbed.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2473
By default the InputRedirectionCursor is created and only the X11
standalone platform creates the X11 specific cursor.
This is a preparation step for moving the X11 specific cursor
implementation into the x11standalone platform plugin.
Summary:
Now powerdevil can adjust brightness using leds subsystem, however, kwin
as well sets brightness to 0 for turning off screen and 0xff when
turning screen back on. This resets the brightness set by the powerdevil
to 100%.
As a solution now kwin listens to brightnessChanged dbus signal of
brightnesscontrol and book-keeps the changed brightness, if screen is
turned off it sets brightness to 0 and when turning screen on, it resets
to old brightness.
If powermanagement service doesn't appear on dbus by default it restores
100% brightness.
Test Plan:
Appearantly this still doesn't work as-it-is on phone, because powerdevil
doesn't emit brightnessChanged dbus signal because of bug in the driver of
backlight control, driver doesn't seem to trigger uevents for changes in
backlight. But with hack in powerdevil to emit brightnessChanged when setting
brightness, this works
Reviewers: broulik, #plasma_on_wayland, graesslin
Reviewed By: #plasma_on_wayland, graesslin
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2468
Summary:
With this change KWin can create window decorations for internal windows.
Thus it's also possible to move internal windows and resize them which is
especially important for the debug console.
Reviewers: #kwin, #plasma_on_wayland, sebas
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2371
Summary:
When closing a nested window kwin_wayland only terminates if the closed
window is the last output window. In a simulated multi-screen setup
closing a window results in the output being removed.
Test Plan: Closed windows, verified with xrandr
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2234
Screens::init sets up a Qt::QueuedConnection connect from countChanged
to changed. This means that when first setting up the connection a
changed signal will be delivered in the next event cycle. This can mess
with other code. E.g. WaylandServer recreating outputs which can make
Xwayland crash or KWin internally crash.
To solve this problem we just need to make sure to set the output count
to the initial value before performing the init.
Reviewed-By: bshah
Summary:
Rational: unredirect fullscreen windows is a weird beast. It's intended
to make fullscreen windows "faster" by not compositing that screen. But
that doesn't really work as KWin jumps out of that condition pretty
quickly. E.g. whenever a tooltip window is shown. KWin itself has a
better functionality by supporting to block compositing completely.
The complete code was full of hacks around it to try to ensure that
things don't break.
Overall unredirect fullscreen has always been the odd one. We had it
because a compositor needs to have it, but it never got truly integrated.
E.g. effects don't interact with it properly so that some things randomly
work, others don't. Will it trigger the screenedge, probably yes, but
will it show the highlight: properly no.
By removing the functionality we finally acknowledge that this mode is
not maintained and has not been maintained for years and that we do not
intend to support it better in future. Over the years we tried to make
it more and more hidden: it's disabled for Intel GPUs, because it used
to crash KWin. It's marked as an "expert" option, etc.
It's clearly something we tried to hide from the user that it exists.
For Wayland the whole unredirect infrastructure doesn't make sense
either. There is no such thing as "unredirecting". We might make use
of passing buffers directly to the underlying stack, but that will be
done automatically when we know it can be done, not by some magic is
this a window of specific size.
Test Plan:
Compiles, cannot really test as I am an Intel user who never
had that working.
Reviewers: #kwin, #plasma, #vdg
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D2180
If the event processing is started before everything is fully started
it can happen that we have "evil" events which may crash either Xwayland
or KWin itself. E.g. if the nested window is too large, the window
manager on the host X-Server will request a resize. If the backend does
that it can happen that the wl_output gets destroyed while Xwayland tries
to bind to it and will crash. Thus let's delay all events till we are
ready to process them.
Summary:
The egl implementation for the virtual platform tries to use a render
node if available. If there is no render node it looks for a virtual
(kernel driver vgem) device, which unfortunately does not create a
render node in mainline kernel (there are patches in ChromiumOS).
For this the Udev wrapper is extended to search for renderNode devices
and for virtual dri devices.
If either render node or vgem dri device is found, it is tried to be
opened (without logind escalation) and on success a gbm device is
created on it. If any step of this fails the so far default behavior
of default device is tried for creating the EGLDisplay.
All of this is compile optional, so that the virtual platform does not
hard depend on udev and/or gbm.
Test Plan:
Auto tests which need OpenGL executed and verified that they
use the render node or vgem device.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2216
Summary:
The position of the output being resized was adjusted instead of only
the other outputs.
Test Plan: Resized windows, verified xrandr
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2235
Summary:
So far SharingPlatformContext was only used if the OpenGL context
supports EGL_KHR_surfaceless_context. If not supported, KWin tried to
create a context through the Wayland API. Unfortunately on hwcomposer
platform this results in a crash as libhybris only supports the init
of EGLDisplay for one native platform.
This change tries to also use the SharingPlatformContext if there is
an OpenGL context in general. It reuses the native EGLSurface created
for the compositing scene and makes its own OpenGL context current on
that surface, too. As KWin creates an FBO, it never renders to it, so
it shouldn't matter at all.
In order to prevent EGL_BAD_MATCH errors when making Qt's OpenGL context
current also the EGLConfig from the scene is used to create the context.
Test Plan: Tested on Nexus5 with qtvirtualkeyboard in KWin
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2231
Summary:
KWin needs to support restarting the OpenGL compositor in case of a
graphics reset event.
On Wayland the tricky part is that the applications should not notice
this. Most importantly KWin cannot just destroy the EGLDisplay and create
a new one. But this is how a restart works: the complete compositor gets
torn down and recreated - including the EGLDisplay.
This change moves ownership of the EGLDisplay to the Platform.
The AbstractEglBackend subclasses query the Platform whether there is
already an EGLDisplay. Only if there is no EGLDisplay the EGLDisplay is
created and only if no EGLDisplay is registered with Wayland the bind
is performed.
Another change is regarding the destruction: the AbstractEglDisplay does
no longer unbind the Wayland display and does no longer destroy the
EGLDisplay. The EGLDisplay is destroyed by the Platform - so very late
on application exit. The Wayland display is unbound when the Compositor
terminates.
Test Plan:
Limited testing with the added auto-test. This one needs to
be extended to fully verify that OpenGL applications continue to work.
But this requires build.kde.org to support OpenGL on Wayland.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2202
Summary:
Most platforms like the nested and virtual do not handle the outputs
themselves and WaylandServer announces the Outputs to Wayland.
So far this was static: at startup it got announced once to Wayland
and any changes were not catched.
This change makes WaylandServer listen to changes to the Screens and
sync them to Wayland.
Unfortunately KWin's internal Screen information is not sufficient to
properly synchronize this to Wayland and also Wayland by not supporting
adding/removing modes does not help.
Thus the solution implemented here is to add new outputs reflecting the
changes and then removing the old ones. This creates situations with more
outputs being present than actually there, but prevents that there are
no outputs at all.
Test Plan: Auto test added which verifies this for the virtual platform
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2233
Summary:
When sharing surface and config used by the compositor scene with
QtQuick's OpenGL context an RGBA surface makes Qt way more happy.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2232
Summary:
With this change the Wayland platform plugin uses the XdgShell to
create the window if available. This allows to close the window and
thus quit the nested kwin_wayland properly.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2201
Some error conditions did not have a warning, so all we got is
"Could not initialize rendering context". Which is not helpful to
figure out what is going wrong.
For virtual machines with Cirrus device the drmModeAddFB fails. So
far there was no error message at all, we only saw it failed.
With this change the drmModeAddFB is checked for error and a warning
is shown. Also further debug messages are added for other cases where
things can fail.
Reviewed-By: Eike Hein
Summary:
So far if the framebuffer platform run into an error on initialization
it did not continue and caused the system to freeze. With this change
it properly emits the initFailed signal in all error conditions which
causes kwin_wayland to terminate. This is a much better situation than
just staying in a running, but frozen state.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2149
Summary:
If it's not possible to create a buffer to blank the output, KWin won't
be able to render to the output. In that case the output should not be
added to the list of outputs.
To support this DrmOutput::blank and DrmOutput::init return bool to
indicate whether they succeeded. DrmBackend handles this situation and
doesn't add the output to the list of outputs if init failed.
If after init there are no outputs KWin is in a state where it won't
be functional. Thus the platform emits the initFailed signal to
terminate.
BUG: 365242
FIXED-IN: 5.7.2
Test Plan: No hardware to reproduce the condition
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2135
Summary:
If the format of the framebuffer is BGR we cannot create an RGB image
format from it - the rendering is incorrect. Unfortunately QImage does
not support a BGR image format.
To solve this problem we still use an RGB image format but on rendering
the front buffer is rgbSwapped to convert the RGB image to a BGR image.
BUG: 365243
FIXED-IN: 5.7.2
Test Plan: Tested on a neon kvm
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2134
Summary:
No need to delegate the painting of the software cursor into the backend.
The core has enough information to perform the rendering itself.
This change means less code duplication and all platforms which might use
a software cursor in QPainter compositor gain support for it without any
further adjustments.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2028
Summary:
So far the drm platform did not verify whether creating and mapping a
DrmBuffer for a cursor works. This could result in a crash in the worst
case.
This change verfies whether mapping the two cursor buffers works, if
not software cursor is enabled. The code is adjusted to ensure that
none of the cursor buffers is accessed in case software cursor are
enabled.
Please note that right now the drm platform's rendering does not
support software cursors. Thus currently this change results in no
cursor at all. This will be addressed by following patches.
BUG: 364740
FIXED-IN: 5.7
Test Plan:
Verfied that it properly falls back to software cursor,
but could not verify that the crash is actually fixed.
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2026
Summary:
Platform::setSoftWareCursor creates connections to the Cursor in order
to trigger repaints whenever the cursor position changes. The Cursor is
created before Platform::init is called, but after the Platform is
created. Thus the call needs to happen in init, otherwise the cursor
is not rendered correctly.
BUG: 356328
FIXED-IN: 5.7.0
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D2025
Summary:
When we get a configuration request, we also need to update the global
position on the DrmOutput, otherwise Wayland will know about the new
position, but KWin internally does not.
In addition we also need to trigger the changed signal on KWin::Screens,
so that internally code can react on the change.
With this change configuring layout of connected screens in KScreen
does work also in KWin.
Reviewers: #kwin, #plasma_on_wayland, sebas
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1858
Summary:
To use eglCreateImageKhr for an X11 pixmap we need an EGLDisplay created
for the same XDisplay as the X11 pixmap. This means if we created an
EGLDisplay for a GBM device, we are not allowed to load a texture from
the X11 pixmap and can result in a crash in the driver.
Similar in the nested X11 setup the EGLDisplay is created for the
rendering window, but the X11 pixmaps are from the Xwayland server KWin
started. They don't belong to the same windowing system.
This change addresses this problem by moving the loading of X11 pixmaps
from AbstractEglTexture to EglTexture of the EglOnX11Backend. Thus for
any usage on a non X11 platform we cannot hit the code path any more.
In addition the nested X11 platform can indicate that it doesn't support
it and thus also doesn't go through the code path.
Test Plan: Tested standalone and nested X11 platform
Reviewers: #kwin, #plasma_on_wayland
Subscribers: plasma-devel, kwin
Tags: #plasma_on_wayland, #kwin
Differential Revision: https://phabricator.kde.org/D1857
We didn't check whether creating the QPlatfromInputContext worked and
accessed the m_inputContext unconditionally which obviously crashed.
Now the connects related to QInputMethods are not setup if we failed
to create the QPlatfromInputContext.
Reviewed-By: bshah
Summary:
The idea is to have KWin provide a virtual keyboard. To support this
KWin uses the QT_IM_MODULE qtvirtualkeyboard and makes sure that the
QPA plugin loads it.
KWin has a new class VirtualKeyboard which acts as the focus object and
the "proxy" for input methods. The QPA plugin ensures that this is the
focusObject, so that all input method related events are sent to this
class. From there it will be possible to delegate to other applications
through the Wayland interfaces.
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1638
A signal is added to the VirtualBackend to change all screen geometries.
This can be used from auto tests to change the screens. But it's not yet
correctly reflected in other areas. E.g. not forwarded to Wayland Output,
etc.
Summary:
When the pointer device gets plugged off the cursor is hidden, when
a pointer device gets plugged in the cursor is shown again.
This allows to easily turn a tablet into a proper system by showing
the cursor only when it makes sense.
Test Plan: Tested on exopc with external mouse
Reviewers: #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D1682
Summary:
A new virtual method createOpenGLSafePoint is added to Platform.
This is invoked through the Compositor with a PreInit and a PostInit
argument pre and post creating the SceneOpenGL.
The Platform plugin can implement this and use it for detecting whether
creating the OpenGL compositor on this platform crashed in the past.
Thus it's the base for the openGLIsBroken platform check.
The x11 standalone plugin is the first to implement this functionality
using the previous code which was designed for X11.
This also means that a crash of the OpenGL compositor during init on
Wayland won't result in OpenGL being disabled.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1582
Summary:
So far the OpenGL is unsafe check functionality in Compositor disabled
OpenGL compositing if glx is not available and we are in standalone X11
mode.
This is technically no longer correct for quite some time. Just because
GLX is not available doesn't mean that OpenGL doesn't work. We have an
EGL backend. So let's try to use that if glx is not available.
This change removes the check completely from Compositor. Instead the
standalone x11 plugin checks whether glx is available prior to createing
the glx backend. If not available it falls through to the egl backend.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1581
Summary:
CompositingPrefs is only relevant for X11 standalone. It had some
"hacks" to make it not block Compositing on Wayland. Thus it was in
its current form not really useful.
Now all the functionality is provided through Platform with a default
implementation which is sensible for Wayland platforms.
The X11 standalone platform implements the new methods with the
Wayland checks removed.
In addition all calls to CompositingPrefs now go through the platform
directly and CompositingPrefs is completely dropped.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1576
Summary:
This change reduces the windowing system specific code pathes. Instead
of checking whether we are on X11 or Wayland to decide whether
compositing is required, we just ask the Platform.
The default is true, only x11 standalone allows to not require
compositing.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1575
Summary:
If a user specifies the QT_WAYLAND_FORCE_DPI env variable, KWin uses
it to force a logicalDPI, just like QtWayland.
Test Plan: Normally sized window decorations
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1605
Summary: This seems to just have been forgotten here.
Test Plan: Builds
Reviewers: graesslin
Reviewed By: graesslin
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1499
The hwcomposer plugin doesn't need it. It was only created for the
need of libinput relying on it. As libinput doesn't need it any more,
hwcomposer doesn't need to integrate with VirtualTerminal.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1444
Removes a diversion between X11 and Wayland. The base class Platform
creates an instance of class Edge with plugin implementations being
able to create a different type.
The X11StandalonePlugin does that and creates a WindowBasedEdge. For
this the implementation of WindowBasedEdge is moved from screenedges
into the plugin.
Unfortunately an ifdef is needed to make the screenedge test still
work as expected. This should be improved in future, e.g. have a good
way to load the platform plugin from the tests.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1419
Summary:
KWin's plugins are now all in a plugins subdirectory. This is a good
argument to also move the window decoration plugins there. The name
clients was not really good anyway and makes it difficult for people
not familiar with the code base to find it. Having it under plugins
is the more expectable location.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1414
Summary:
The EglOnXBackend is no longer needed in the core. It's only needed by
the two x11 platform plugins. To best share it, it's moved into a common
directory and compiled into a static library which in turn is linked by
the two plugins.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1413
Summary:
It's only needed by the standalone x11 variant. This allows us to
simplify the creation of the OpenGLBackend: it's created by the
platform plugin - we don't need custom complex logic.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1392
By moving XRandrScreens the creation of screens gets simplified a lot
as there is no need to have windowing system specific init code. It all
just goes through the platform.
This also marks the point where the first X11 specific code is removed
from kwin_wayland.
Reviewers: #plasma, sebas
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1355
The plugin does not much. It's the most basic plugin we can have to
be loaded from kwin_x11.
Unlike the wayland platform plugins it gets installed to:
org.kde.kwin.platforms
Summary:
Source code reorganization:
The base class AbstractBackend got renamed to Platform, thus the
"backends" are "platforms" now. As they are plugins they should go
together with other KWin plugins which are nowadays in the folder
plugins.
So new location is plugins/platforms/
Reviewers: #plasma, sebas
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1353
Summary:
Mostly intended for plugins loaded into KWin and wanting to use
KWayland::Client::ConnectionThread::roundtrip(). By providing this
function we can ensure that KWin does not block and nevertheless
perform the required roundtrip.
Reviewers: #plasma
Subscribers: plasma-devel
Projects: #plasma
Differential Revision: https://phabricator.kde.org/D1153
Qt has problems initializing everything correctly if there is no screen
at startup. E.g. the breeze widget style tries to initialize some pixmaps
and this fails. In worst case hitting asserts in Qt (debug build).
This change creates a dummy screen which gets destroyed as soon as there
is a real screen.
Reviewed-By: notmart and sebas
This makes QCursor::pos and QCursor::setPos function correctly. KWin
actually wouldn't need it as KWin has the KWin::Cursor replacement, but
it allows Qt internal API to have it function correctly and also the
zoom effect does use QCursor::setPos.
We need to also destroy all idle objects when we tear down the
internal client connection. Otherwise the cleanup tries to free
the object after our Wayland connection is already destroyed.
During startup it might happen that the QPA is already loaded, but
the wayland server and it's internal connection not yet fully
created. Thus safety check for it.
This is needed to make KWin build-able on non-Linux, but is actually
only a workaround. The dependency should also be available on non-Linux.
This disables the EGL integration in the Wayland backend (QPainter still
available) and the EGL fallback in the qpa plugin (preferred context
sharing still available, but requires a working OpenGL Scene).
REVIEW: 126202
ASAN righly complained: we need to delete our Wayland objects before
we destroy the internal client connection. Solved by better setting
parent relationships in the QPA plugin and correctly delete objects
in destroy of internal client connection.
We need to destroy the compositor after Xwayland terminated and after
the internal Wayland connection is destroyed. This means when destroying
the Workspace we may no longer destroy the Compositor at the same time.
Also we need to ensure that other tear down functionality doesn't call
into the no longer existing internal client connection.
With this change kwin doesn't crash when exiting with Wayland and/or
X11 windows still open.
Basically a simplified fork from kwayland-integration.
We cannot use the idletime plugin from kwayland-integration as it
a) doesn't react on our own qpa plugin name
b) performs blocking roundtrips in the main thread -> freeze
This simplifies by using our internal registry and we don't even check
whether Seat and Idle are announced: we know they are.
Reviewed-By: Bhushan Shah
KGlobalAccel plugin gets deleted by a global static. At that point
InputRedirection is already deleted but the plugin holds a static pointer
to it.
This change connects to the deleted signal by InputRedirection and
ensures that the plugin doesn't call into the deleted code any more.
This is the beginning of a new testing era for KWin: finally we are
able to test against a running KWin. This works by making use of the
new virtual framebuffer backend for Wayland. It starts a specific
Application subclass which is mostly a fork of ApplicationWayland.
The individual tests are able to influence the socket name and the
size of the virtual screen. This is supposed to be done in
initTestCase. To know when KWin is fully started one can use the
workspaceCreated signal of KWin::Application. KWin is not started in
another process, but the kwin library is used, so the test has pretty
much full introspection to everything going on inside KWin. It can
access the Workspace, WaylandServer, fake input events through
InputRedirection and so on.
Once the test KWin is running it's possible to connect to it using
KWayland::Client library. This allows to introspect the Workspace
to see whether all worked as expected (e.g. correct stacking order,
active window and so on).
This first autotest is mostly meant to illustrate how to setup a
test and how one can use KWayland::Client to interact with the mock
KWin. For more tests it is suggested to move the connections to the
Wayland server in the init() and cleanup() methods.
The change also affects the qpa plugin: the specific check to only
run in binaries called kwin_wayland doesn't hold any more. This can
now be overwritten by an env variable.
Please note that this first test will probably fail in the CI system
as it might not have XWayland which is needed by KWin.
We no longer need to have the event dispatcher created before starting
the QApplication, thus we can leave it to the QPA plugin to creat it.
Also we don't need to implement our own dispatcher any more but can
use one from Qt5PlatformSupport as we link it anyways. The special
need for dispatching the WaylandServer is no longer needed as we can
explicitly dispatch it from the QPA plugin if needed.
This introduces an own QPA plugin for KWin. QtWayland's plugin is not
a good solution for KWin as QtWayland is meant for Wayland clients and
not for a Wayland server. Given that it makes more sense to have a very
minimal QPA plugin which supports the use cases we actually have.
With our own QPA plugin we should be able to improve the following
areas:
* no need to create Wayland server before QApplication
* Qt::BypassWindowManagerHint can be supported
* no workaround for creating OpenGL context in main thread
* sharing OpenGL context with Qt
* OpenGL context for Qt on libhybris backend
The plugin supports so far the following features:
* creating a QPlatformWindow using KWayland::Client (ShellSurface)
* creating a QPlatformBackingStore using a ShmPool
* creating a QPlatformOpenGLContext with Wayland::EGL
* or creating a QPlatformOpenGLContext which shares with KWin's scene
* creating a QPlatformScreen for each KWayland::Client::Output
* QPlatformNativeInterface compatible to QtWayland
Overwrite the platform name through the environment variable and ensure
that the plugin is not picked in non-kwin Wayland sessions as that puts
kglobalaccel5 into a crash restart loop.
BUG: 349911
The KGlobalAccelD which gets created by KWin needs a plugin for the
platform specific parts. This change introduces such a plugin. It's
linked against kwin so that it can integrate with the core.
On enable the plugin registers itself in the InputRedirection and
GlobalShortcutsManager checks the plugin whether a shortcut got
triggered.
As the loading of the plugin must happen after InputRedirection is
fully created a dedicated init method is added to InputRedirection.
REVIEW: 124187