KWin::rootWindow() uses the property to resolve the value instead of
using QX11Info. In practice this doesn't change anything at the moment,
but allows kwin_wayland to provide a root window without depending on
QX11Info.
The porting to Qt5 broke the timestamp handling in many areas. A deeper
look into Qt's xcb plugin shows that the appTime handling is not
sufficient for KWin's need. E.g. the time is only updated in response to
a property notify event if it's for a Qt created window, which is hardly
ever the case in KWin. Another example is that key press/release events
never updated the appTime.
As the functionality in Qt is rather trivial we can do the timestamp
handling ourselves. We filter all events anyway and it is slightly faster
as we don't have to go through the QPA interface any more.
REVIEW: 122636
Resetting glPixelStore is bound to the variable useUnpack, but setting
was only bound to a subset of the checks going into useUnpack variable.
This could cause an assert if one updated with a QImage not in format
ARGB32_Premultiplied.
REVIEW: 122521
it makes no sense and there's a good chance
that in this case m_vbo is still nullptr and
it will not be created since d->m_cachedSize
will be an empty size as well
-> nullptr access -> crash
BUG: 337090
FIXED-IN: 5.2
Use glTexStorage2D() to allocate storage for the texture. The structure
of the resulting texture becomes immutable and the texture is always
mipmap complete. This allows the driver to skip the mipmap consistency
checks when validating the texture at draw time.
Prior to this commit we didn't know if mipmaps were going to be used
when we created the GL texture, which meant that we couldn't tell the
driver whether to allocate storage for mipmaps or not.
This resulted in one of two things happening depending on the driver;
either it would allocate storage for mipmaps that in most cases would
never be used, or it wouldn't and would later be forced to reallocate
the texture when mipmaps were added.
By adding this parameter we can now explicitly tell the driver how
many mipmap levels will be used.
The parameter is only added to the non-image constructor for now. The
image constructor is changed to only allocate a single level, which
matches how textures created from images are used in kwin. This may
need to be revisited in the future.
GLTexture would set both the minification and magnification filters
to GL_NEAREST if the texture filter was set to any mipmap filter other
than GL_LINEAR_MIPMAP_LINEAR.
This code is broken in a number of different ways; firstly by assuming
that the mipmaps need to be regenerated when the texture filter has
changed. Secondly by preventing mipmaps from being specified by other
means.
This commit removes the code from bind() and adds a generateMipmaps()
method instead.
Effects currently modify the matrices by reading back the uniform
values from the shader they assume will be used to paint the window,
set new values for the uniforms, call paintWindow(), and then restore
the uniforms to their previous values.
This is both slow and unreliable, and will not work with dynamically
generated shaders.
This patch solves the problem by putting the matrices in
WindowPaintData and making it the responsibility of the paintWindow()
implementation to set the uniforms.
This adds new API in ShaderManager that makes it possible to request a
shader based on a set of traits. ShaderManager generates these shaders
on demand and caches them in a hash table.
Instead of getting size from displayWidth() and displayHeight() use
the information we have from Screens. This means there is only one
place to have the information and by that we can ensure that all
components use the same data to rely on. displayWidth/displayHeight
seem to provide the wrong information when unplugging an output
without disabling the output. This results in rendering artefacts.
But KWin::Screens has the correct information available.
This is the only place where it is called.
There was also no need for this function to be virtual since it's not
reimplemented anywhere.
This also fixes the GLTexturePrivate being created only to be
immediately deleted and replaced by a new GLTexturePrivate when the
GLTexture(QImage) constructor was used.
With this change the structure of the GLTexture effectively becomes
immutable to the outside world; the contents of the texture images can
change, but the texture images themselves cannot be reallocated.
QImage::Format_RGBA8888_Premultiplied is the equivalent of
GL_RGBA/GL_UNSIGNED_BYTE, so use QImage::convertToFormat()
instead.
This commit also makes the texture upload code work correctly
on big-endian systems.
All of kwin except the main function goes into a new (private) library
called kwin. Two new kdeinit_executables are created:
* kwin_x11
* kwin_wayland
Both only use a dedicated main_x11.cpp and main_wayland.cpp with the
main function and a KWin::Application subclass and linking the new
kwin library.
The main idea behind this is to be able to perform more sane sanity
checks. E.g. on Wayland we don't need to first test whether we can
create an X11 connection. Instead we should abort if we cannot connect
to the Wayland display. Also the multi-head checks are not needed on
Wayland, etc. etc. As most of that code is in the main function to
simplify it's better to split.
This will also make it easier to diverge more easily in future. The
Wayland variant can introduce more suited command line arguments for
example. This already started by having the --replace option only
available in X11 variant. The Wayland backend is still a window manager,
but doesn't claim the manager selection.
The left and right border images are rotated 90° before they are
uploaded into the atlas texture. The images are separated by a row
of transparent texels to minimize artifacts from oversampling.
With this change kwin renders the whole decoration with a single
call to glDrawArrays().
When this property is true, it indicates that the +U axis corresponds
to the +Y axis, and the +V axis corresponds to the +X axis.
This property is taken into account in WindowQuad::makeSubQuad().
It doesn't make sense to convert the extension names to QStrings.
This also replaces the QString parameter in hasGLExtension() with
a QByteArray and adjusts all callers.
Remove the manually written GL dispatch code, and use libepoxy
to resolve functions.
The only exceptions are GLX_MESA_swap_control, which is not in
the XML API registry, and GL_ARB_robustness/GL_EXT_robustness.
For the latter we want to resolve the functions to the same names
on both GLES and desktop GL, and plug in our own implementations
when the extension is not supported.
The used platform interface is passed to the ::detect method as an
argument. The value is now cached in the GLPlatform instance so that
there is an easy way to figure out which platform interface is currently
used.
So far the effects could just use the connection() and rootWindow()
provided by kwinglobals. Thus an internal detail from KWin core is
accessed directly.
To be more consistent with the rest of the API it's wrapped through the
EffectsHandler and with a convenient method in Effect.
The connection() is provided as xcbConnection() to free the very generic
name connection which could create confusion once we provide a wayland
connection to the Effects.
The rootWindow() is provided as x11RootWindow() to indicate that it is
for the X11 world.
REVIEW: 117597
* add static cleanup handlers to GLTexturePrivate and GLRenderTarget
* revert the runtime resolved features (e.g. RenderTargets are not
supported once we run the cleanup code)
* clear the extension lists
* reset the version variables
REVIEW: 117484
Adds a cleanup() method to GLPLatform which deletes the static instance.
It gets invoked from cleanupGL() in kwinglutils on tear-down of the
OpenGL backend. Thus the backend doesn't leave incorrect GL info around.
E.g. if KWin starts with llvmpipe the recommended compositor is XRender.
So the backend and the platform is created. Now KWin starts the XRender
Compositor and the GLPlatform is still valid and when trying to load the
Blur or Contrast effect this will succeed as the GLPlatform data would
allow it. But on first try to use the Effect it will fail due to no
valid OpenGL context and even crash.
REVIEW: 117480
The EffectLoader is a subclass of AbstractEffectLoader delegating all
methods to instances of:
* BuiltInEffectLoader
* ScriptedEffectLoader
* PluginEffectLoader
It's used by the EffectsHandlerImpl and replaces the complete Effect
loading mechanism we so far found in it. This also means that KLibrary
is no longer needed to load the Effects as the PluginEffectLoader uses
the KPluginTrader, which removes lots of deprecated functionality.
REVIEW: 117054
A KWin::EffectPluginFactory is introduced which provides a specialized
create method and methods for the supported and enabledByDefault checks.
A set of KWIN_EFFECT_FACTORY macros are added which create a subclass
of this EffectPluginFactory following the approach from the
KPluginFactory macros. The macros only support json metadata thus the
QPluginTrader needs to be used.
The KWIN_EFFECT macros are removed as they are no longer needed.
KWin Core's loader is not yet adjusted to this change. This is a
preparation step for introducing a PluginEffectLoader.
This method replaces the X-KDE-ORDERING property in the Effect's desktop
files. This change is a preparation step for integrating the new Effect
Loader which doesn't read the ordering information. Thus it needs to be
provided by the Effect itself so that the EffectsHandler can properly
insert it into the chain.
Also for the built-in Effects on the long run it doesn't make much sense
to install the desktop files. And binary plugin effects will migrate to
json metadata which also doesn't have the KService::Ptr. Thus overall it
simplifies to read this information directly from the Effect.
XRenderUtils are split out of kwineffects and are an own library just
like kwinglutils is an own library.
The library gets always build and is linked in KWin core unconditionally
(as it's used in outline) and conditionally in kwineffects (PaintClipper)
and the built in effects depending on XRender build option.
XRenderUtils used connection() and rootWindow() provided by kwinglobals.
Those are now kept as static variables in the implementation set through
an init() method from Workspace prior to the first possible usage of any
functionality provided by XRenderUtils.
In order to make the xcb_connection_t* and the root window completely
internal the inline methods which used those are moved to the
implementation.
Instead of using EffectsHandler::sendReloadMessage we generate the dbus
interface in each plugin and call the reconfigure slot directly. That way
it's more type safe and we don't need to link kwineffects from the
configs.
REVIEW: 116875
There are no advantages for the effects KCM to have all the effect
config modules in one plugin.
By having a plugin per effect we can use the KPluginTrader to easily
find the configuration plugin for a given effect and load it.
To make this possible the following changes are done:
* config_builtins.cpp is deleted
* add_subdirectory is used for all effects which have a config module
* toplevel CMakeLists.txt contains the sources again for the effects
which have a config module, but effects which don't have a config
module are still included and thus the macro is still used
* plugin created for the config module, name pattern is:
kwin_effectname_config
* plugin installed to ${PLUGIN_INSTALL_DIR}/kwin/effects/configs
* desktop file adjusted to new plugin name and keyword removed
* desktop file converted to json as meta data and no longer installed
* Uses K_PLUGIN_FACTORY_WITH_JSON
* Macros for config are dropped from kwineffects.h
REVIEW: 116854
Implemented in KWin core to forward to new global shortcut system. This
method should be extended/changed once we go to Qt5/KF5 to make the usage
easier (no more KAction).
Each global shortcut in the effects makes use of this new method.
It's no longer needed as the OpenGLBackend has a direct rendering
detection and the remaining OpenGL2 backend aborts if the backend
uses indirect rendering. Thus the GLPlatform must always have a
direct rendering context.
REVIEW: 116829
KWin already has a de facto OpenGL 2 dependency through QML. Combined
with the fact that the OpenGL 1 backend is basically unmaintained and
also unused, it's better to remove it for the new major release.
This change includes:
* Removal of cmake option KWIN_BUILD_OPENGL_1_COMPOSITING
* Removal of KWIN_HAVE_OPENGL_1 compile option and all code
ifdef'ed with it (partially removal of if-else constructs)
* Removal of CompositingType::OpenGL1Compositing (flags are kept
as a core flag should get introduced)
* Driver recommendation for OpenGL1Compositing changed to XRender
(should be evaluated whether the drivers can provide GL2)
* Removal of configuration option "GLLegacy"
* Removal of fooMatrix function in kwinglutils
* Removal of ARBBlurShader
* Removal of legacy code path in GLVertexBuffer
* Removal of GLShaderManager::disable
* if-blocks with ShaderManager::instance()->isValid() removed
REVIEW: 116042
Rational behind this change is that displayWidth and displayHeight are
X specific API calls in kwinglobals. For the future it's easier to only
rely on functionality which goes through the EffectsHandler API which
allows easier adjustments in KWin core.
displayWidth() and displayHeight() are only used to get the size or the
complete rect of all screens. This is also provided by:
effects->virtualScreenGeometry() or
effects->virtualScreenSize()
REVIEW: 116021
Screens provides a size which is constructed from the size of
the bounding geometry of all screens and provides an overload taking
an int to return the size of a specified screen. For geometry() a new
ovload is added without an argument, which is just a convenient wrapper
for QRect(QPoint(0, 0), size()).
Both new methods are exported to effects and scripting as new
properties there called virtualScreenSize and virtualScreenGeometry.
The (virtual) size gets cached in screens and is updated whenever the
count or geometry changes.
Construction of Screens is slightly changed by moving the init code
from ctor into a virtual method init(). Reason is that we ended in
a loop with accessing the singleton pointer before it was set.
REVIEW: 116114
By setting the X property _KDE_NET_WM_SKIP_CLOSE_ANIMATION to 1 a window
can request to be excluded from any close animation. This property is
read in Toplevel, so that it is available to both Client and Unmanaged.
If the window has this property set the Scene suppresses the paintWindow
loop of the Deleted. Thus no effect needs to be adjusted. But an effect
using drawWindow directly would still be able to render the Deleted as
there is no suppression.
Furthermore the property is passed to the EffectWindow so that an
Effect can make use of this functionality and not start the animation
in the first place.
REVIEW: 115288
* this effect is way cheaper than blur, don't cache it
* use its own atom
* also pass the matrix in the x property
* remove remnants of the cache
* do just a single pass
* get rid of config ui remnants
Effects can access the QPainter used by SceneQPainter to directly render
into the back buffer.
Obviously only available in Compositing Type QPainterCompositing.
This compositor uses only the QPainter API to perform rendering. The
window's X Pixmap is mapped to a QImage using XShm. As rendering backend
a QImage is used.
The new compositing type "QPainterCompositing" is introduced. Effects
need to be adjusted to explicitly check the compositing type and no
longer assume the compositing type is XRender if it's not OpenGL.
This compositor can be selected with using "Q" as the value for
KWIN_COMPOSE env variable or setting the config value to "QPainter".
The GUI is not yet adjusted to select this compositor.
The QPainter scene provides currently the following features:
* 2D transformations (translation and scalation)
* opacity modifications
* rendering of decorations (new PaintRedirector sub class)
* rendering of shadows
* rendering of effect frames
* rendering to a Wayland surface
The following features are currently not provided:
* saturation changes
* brightness changes
* 3D transformations
* rendering to X Overlay window
* offscreen rendering (e.g. needed for screen shot effect)
* custom rendering in the effects to the current back buffer
Completing the task of replacing all NULL to nullptr in all the files in
libkwineffects folder.
(also substituting some "0" used as nullptr with nullptr)
REVIEW: 114823
Client used to have dedicated methods for different icon sizes instead
of combining all pixmaps into one QIcon. This resulted in various parts
of KWin having different access to the icons:
* effects only got one pixmap of size 32x32
* decorations only got the 16x16 and 32x32 pixmaps combined into a QIcon
* tabbox could request all icon sizes, but only as pixmap
Now all sizes are available in one QIcon allowing to easily access the
best fitting icon in a given UI.
