* "" needs to be wrapped in QStringLiteral
* QString::fromUtf8 needed for const char* and QByteArray
* QByteArray::constData() needed to get to the const char*
Qt 5 only supports raster which means our pixmaps are always non native,
so we don't need the Extension information any more and can drop all
special code handling for mapping a native QPixmap to an X11 pixmap.
This method returns true when glMapBufferRange() is likely to perform
worse than glBufferSubData() when updating an unused range in a buffer
object.
This is the case with the NVIDIA driver, where glMapBufferRange()
will force thread serialization. The driver tracks which ranges of
the buffer are in use, so calls to glBufferSubData() should not
cause a pipeline stall.
Assume that the default framebuffer has the same dimensions as the screen.
By not quering the dimensions of the viewport we don't risk serialization
in drivers that use threaded dispatch.
This reverts commit 23dff966437bb664a2ffdb3f7957ef39978f5fad.
Using QVector is not a win when effects such as wobbly windows are
active, due to the realloc overhead. So revert this change for now.
Eg. gtk+ alters the modality after mapping and
before unmapping the window.
Therfore the former implementation ahd a wrong idea
about the modality until the window was activated and
again had a wrong idea when the dialog closed, keeping
the main client dimmed.
Modality changes at runtime are uncommon but legal and can
happen anytime.
BUG: 321340
FIXED-IN: 4.11
REVIEW: 111154
Prevents the possiblity of using shaders modified for color correction
without valid data from KolorManager. If that happened, everthing
blacked out.
Now the color correction shaders are enabled only after successfuly
contacting KolorManager.
The issue was highlighted after ab7e228d.
BUG: 321217
it seems an animation can be triggered and the resp.
window deleted in the first event cycle (before the deleted
signal is bound) - so we add an initialization flag to ensure
the binding happens before the first animation is added
BUG: 320562
FIXED-IN: 4.11
REVIEW: 110872
Just like Opacity for transforming only the decoration opacity.
It's an ABI break as the new enum value had to be included as anonther
non-float base value.
Cross fading with previous pixmap is achieved by referencing the old
window pixmap. WindowPaintData has a cross-fade-factor which interpolates
between 0.0 (completely old pixmap) to 1.0 (completely new pixmap).
If a cross fading factor is set and a previous pixmap is valid this one
is rendered on top of the current pixmap with opacity adjusted. This
results in a smoother fading.
To simplify the setup the AnimationEffect is extended and also takes care
about correctly (un)referencing the previous window pixmap. The maximize
effect is adjusted to make use of this new capabilities.
Unfortunately this setup has a huge problem with the case that the window
decoration gets smaller (e.g. from normal to maximized state). In this
situation it can happen that the old window is rendered with parts outside
the content resulting in video garbage being shown. To prevent this a set
of new WindowQuads is generated with normalized texture coordinates in
the safe area which contains real content.
For OpenGL2Window a PreviousContentLeaf is added which is only set up in
case the crass fading factor is set.
REVIEW: 110578
This avoids the overhead of allocating each WindowQuad on the heap
when appending items to the list, and also ensures that the quads
are continuous in memory.
This reduces the size of the geometry that needs to be uploaded by
one-third, and allows kwin to take advantage of the post-transform
cache in the GPU.
Expose bindArrays(), unbindArrays() and add a draw() method that takes
an offset and a count. This makes it possible to upload geometry, call
bindArrays(), and then call draw() multiple times to draw different
subsets of the uploaded geometry.
Split WindowQuadDecoration into WindowQuadDecorationLeftRight
and WindowQuadDecorationTopBottom.
This simplifies the code in SceneOpenGL::Window::paintDecoration().
Do not schedule repaints in AnimationEffect if there are no animations
going on. If an animation is waiting for starting or kept after ending
the visual appearance is no longer changed, so no repaint is needed.
REVIEW: 110795
Unlike makeArrays() this function writes into a pre-allocated array,
and takes a matrix that's used to transform the texture coordinates.
This allows this function to handle coordinates for rectangular
textures correctly.
Note that unlike the previous commit, this doesn't fix texture coordinates
for rectangular textures. That case cannot be handled correctly without
knowing the dimensions of the texture.
This method returns a matrix that transforms normalized or un-normalized
texture coordinates, taking the texture target and y-inversion flag into
account.
KWin always updates the array buffer binding before it calls GL functions
that reference it, so there is never any need to reset it.
This should eliminate half the calls to glBindBuffer() while painting
the scene.
These methods make it possible to write directly into the buffer object
when building vertex arrays.
If the buffer object cannot be mapped, the map() method will return
a pointer to local memory which will be submitted to the buffer object
with glBufferData() when unmap() is called.
This overload makes it possible to upload data of an arbitrary size and
type into the buffer object. The intent is for this method to be used
to upload interleaved vertex data.
This commit also adds setVertexCount() and setAttribLayout().
The rationale for decoupling attribute specification from data uploading
is that the attribute formats and layout change less frequently than
the vertex data.
The vertex count is also specified using a separate function to enable
the caller to upload data for multiple draw calls at the same time.
Store the formats as an array in GLVertexBufferPrivate.
This simplifies the code for enabling the generic vertex arrays,
and also makes it easier to add new arrays.
Consolidate the code for binding and unbinding the vertex arrays into
two new methods called bindArrays() and unbindArrays() respectively.
This patch also removes the three paint implementations, since the only
difference between them is the code that sets up the arrays. The actual
painting code is moved into GLVertexBuffer::render(), which uses the
new methods to bind and unbind the arrays.
In case OpenGL ES 3 is provided by the driver we can use the GLSL 1.40
shaders as GLSL 300 ES shaders. The #version declarative is rewritten in
such a case.
REVIEW: 110590
Only the subset of functions available in core contexts is resolved,
except for glGetnTexImageARB() and glGetnUniformivARB(), which are
not used by kwin.
Instead of setting the function pointers to NULL when the extension isn't
supported, kwin provides its own implementations that call the non-robust
versions of the functions. This is so callers don't have to check if the
extension is supported before calling the functions.
Allocate enough space to hold the geometry for multiple draw calls,
and use glMapBufferRange() to gradually fill the buffer. Once the
data store is full, it's orphaned and a new one is allocated.
Store the vertex positions and texture coordinates in the same buffer
object. This saves one buffer allocation in every setData() call.
The attributes are also interleaved as they are uploaded into the buffer
to maximize locality of reference.
This patch adds a link() function, along with bindAttributeLocation()
and bindFragDataLocation().
These functions must be called after creating the program, but before
linking it.
A new ExplicitLinking flag must be passed to the constructor to prevent
automatic linking. This is to keep existing code working without
modifications.
Use glGetStringi() to list the extensions when the GL version is 3.0
or greater. glGetString() does not accept the GL_EXTENSIONS token
in an OpenGL core context.
With the removal of BoxSwitch all effects which want mouse events use the
fullscreen input window. The available functionality is too complex both
in EffectsHandler and in the Effects.
With this change only fullscreen input windows are supported and all
effects share the input window. This means there is at maximum one input
window. This simplifies the code in the Effects as they don't have to
keep track of the window they created any more. In EffectsHandler it
means that only one window needs to be created, destroyed and raised.
Also it means that we can properly react on screen size changes which had
been ignored in the past. Also quite some roundtrips to X are no longer
needed as we do not need to query the window geometry when creating the
input window.
REVIEW: 110156
The non-composited part handles the showWithX case with the four small
windows. The composited part shows a translucent QWidget with the
FrameSvg as done by the selection effect frame.
Outline connects to the Compositor toggled signal to switch the mode if
compositing gets suspended/resumed. This works fine also in the case that
the switch happens while the outline is shown. To support this Outline
is now a QObject and created with Workspace as a parent.
Given that the Outline handles both cases by itself, the outline effect
is no longer needed and is dropped together with all the hooks into the
effect system.
The define KWIN_SINGLETON adds to a class definition:
public:
static Foo *create(QObject *parent = 0);
static Foo *self() { return s_self; }
protected:
explicit Foo(QObject *parent = 0);
private:
static Foo *s_self;
There is an additional define KWIN_SINGLETON_VARIABLE to set a different
name than s_self.
The define KWIN_SINGLETON_FACTORY can be used to generate the create
method. It expands to:
Foo *Foo::s_self = 0;
Foo *Foo::create(QObject *parent)
{
Q_ASSERT(!s_self);
s_self = new Foo(parent);
return s_self;
}
In addition there are defines to again set a different variable name and
to create an object of another inheriting class.
All the classes currently using this pattern are adjusted to use these
new defines. In a few places the name was adjusted. E.g. in Compositor
the factory method was called createCompositor instead of create.
REVIEW: 109865
REVIEW: 103948
BUG: 91703
BUG: 299245
FIXED-IN: 4.11
- The setting is ignored, the decoration always gets a "true" for it
- moving a maximized window requires breaking a "strong" snap (1/16 of screen height - unless you use quick maximization)
- all snapping is done towards the client, not the frame
- QuickTileMode is exported to the decoration (just as the maximizeMode) so that it can fix the bordersize alongside that.
Ownership of decoration textures is moved from SceneOpenGL::Window to
OpenGLPaintRedirector. The PaintRedirector is responsible for updating
the textures whenever they change. For this GLTexture is extended by an
update(QImage, QPoint) method which uses glTexSubImage2D to update only
the changed parts.
The big advantage compared to before is that if e.g. only a button is
animated only the button part is updated instead of the complete deco
part.
Using a lib variable for:
* own libs
* qt libs
* kde libs
* xlib libs
* xcb libs
and link those groups together in target_link_libraries. This should
make the code easier to read and easier to support in future for some
time both Qt4 and Qt5.
displayWidth/Height() are rewritten on top of XCB. rootWindow() and
xTime() return xcb datatype instead of XLib datatype.
Unfortunatelly it's not possible to cache the result for displayWidth and
Height, but getting the default screen is cached and provided in another
method.
REVIEW: 109177
This is for two reasons:
1. Fixes crash on tear-down when XGetXCBConnection returns junk
2. In Qt5 getting the connection is not cheap enough for our uses
REVIEW: 108826
Uses query_pict_formats to retrieve all formats and iterates over them to
find the one matching the requested depth. Results are now cached in an
QHash with the depth as key instead of an array using the depth as index.
In case of native graphics system nothing is changed for the moment - the
X11Pixmap-QPixmap bridge is continued to be used.
But in case of graphics system raster (or Qt5) this relationship is no
longer used. Instead the QPixmap is converted to a QImage and the image
bits are put into the created X11Pixmap for this XRenderPicture.
Note: Qt5 uses shm to transfer image data to drawables. This seems
unsuited in this case as it's only a one time transformation.
For Qt5 the native pixmap block needs to be removed and the ctor might be
changed to taking an QImage as argument to make more clear that there is
no mapping from QPixmap to X11Pixmap.
Instead of having a pointer to a QPixmap the offscreen target holds an
xcb_render_picture_t. To make this possible in SceneWindow the tempPixmap
is changed from a QPixmap* to a XRenderPicture*. QPixmap was only used
for convenience.
ScreenShot Effect as only user of the offscreen target is adjusted but
as it needs a QImage, still uses a QPixmap wrapper.
This follows how it is done for OpenGL where the renderRoundBox() got
dropped some time ago.
New implementation implements the box with round corners using xrender
directly instead of using a QPainter on a QPixmap.
EffectsHandlerImpl starts to monitor DBus for the screen being locked and
provides this information to the Effect system by allowing them to ask
whether the screen is currently locked and by emitting a signal when the
screen gets locked/unlocked.
This information is needed to ensure that no private data is shown on the
screen. The following effects are adjusted:
* taskbar thumbnails
* thumbnail aside
* mouse mark
* screen shot
BUG: 255712
FIXED-IN: 4.11
REVIEW: 108670
For each edge an additional "approach" area window is created. When the
mouse enters this approach window, it gets unmapped and a mouse polling
interval is started. If the mouse leaves the approach area again, the
window gets mapped again and the mouse polling is stopped.
During the approaching a signal is emitted with a factor in [0.0,1.0] to
describe how close the mouse is to the edge. 0.0 means far away, 1.0
means triggering the edge. This signal is passed to the effects to allow
using this information. E.g. to provide a glow corner effect or to make
use of it in the cube animation effect to start the animation on desktop
switch.
The main difference is that the activation of an edge is no longer
broadcasted to all effects and scripts, but instead a passed in slot of
the Effect/Script is invoked.
For this the EffectsHandler API is changed to take the Effect as an
argument to (un)reserveElectricBorder. As callback slot the existing
borderActivated is used.
In addition the ScreenEdge monitors the object for beeing destroyed and
unregisters the the edge automatically. This removes the need from the
Effect to call unregister in the dtor.
BUG: 309695
FIXED-IN: 4.11
No effect has ever used these methods and there is no reason why an
effect should use them. Reserve/unreserve is sufficient as the effect
will be notified anyway.
Use xcb to create and manage the X11 backend of Outline. In addition the
used background pixmaps are rendered with XRender instead of using a
QPainter on a QPixmap. This is done because QPixmap is no longer bound to
an X Pixmap.
To create the XRender Picture the available functionality from
kwinxrenderutils is used. To be able to use it in KWin core the compile
option to build without XRender is removed for kwinxrenderutils, but
still supported for effects.
Obviously the port to XCB is not complete as xremderutils itself is still
on XLib.
REVIEW: 108642
In effects it's obvious that compositing is enabled, so specifying the
translucent element is no problem.
In tabbox a context property "compositing" is injected which decides
whether "translucent" or "opaque" elements should be used. Here the
translucent elements are only used if the Blur effect is available - for
this a new Effect::Feature Blur is introduced and in addition it is
tested whether the theme provides the translucent element.
Also the masking is adjusted to ensure that only the shadow is not
blurred.
Reason for this change is that Plasma theme seems not always to pick up
whether compositing is used when used from inside KWin. It does not cover
the Desktop Change OSD which uses PlasmaCore.Dialog and there we cannot
(yet) inject that we use compositing.
Overall I'm quite unhappy with this patch and I do hope we can fix it in
the proper place in the lifetime of 4.10 and revert this patch.
CCBUG: 311995
REVIEW: 108438
The extension handling is removed from kwinglobals and moved into the
xcbutils in KWin core in namespace KWin::Xcb. The motivation for this
change is that the Extensions are only used in KWin core and are marked
as internal. So there is no need to have them in the library.
What remains in Extensions are the non-native pixmaps. This will be
removed once we are on Qt 5 as QPixmap can no longer reference an XPixmap.
The remaining code in kwinglobals also still initialize the XLib versions
of extensions emitting events. It seems like there are no XEvents emitted
if not done so even if the extension is correctly initialized with xcb.
This needs to be removed once the event handling is ported over to xcb.
REVIEW: 107832
This property can be used to check whether a window is currently visible
to the user, that is:
* not minimized
* on the current desktop
* on current activity
This is a common need for various effects.
REVIEW: 108341
When correcting a color that was with premultiplied alpha, the alpha
value was not multiplied back again as a final step. This was breaking
color correction when the blend function was GL_ONE,
GL_ONE_MINUS_SRC_ALPHA. The blend function was changed for normal
windows (a workaround), but not for effect frames, i.e. the effect
frames were broken with color correction enabled.
Removes the blend function workaround.
Removes a useless setupForOutput.
BUG: 311319
REVIEW: 108189
Checks are now performed for GL errors and in case of errors everything
is aborted. The error handling mechanism introduced for this purpose
somewhat improves the color correction code.
Fix gl invalid operation in color correction, when first setting up the
lookup texture uniform.
REVIEW: 107754
Instead of each effect, which needs to announce support, having custom
code to create a property and set it on the root window, there is now a
common API in EffectsHandler to take care of this.
The methods takes care of creating the atom if it has not already done
and set the property on the root window. Furthermore it allows multiple
effects to announce the same property without getting in conflict with
each other.
As a further convenience the property is automatically removed when the
effect is unloaded, so less things an effect author has to care about.
REVIEW: 107815
The ownership for virtual desktops is moved from Workspace into a new
VirtualDesktopManager. The manager is responsible for providing the count
of virtual desktops and keeping track of the currently used virtual
desktop.
All methods related to moving between desktops are also moved from
Workspace to the new manager, though all methods related to Clients on
Virtual Desktops remain in Workspace for the time being. This is to have
the new manager as independent from KWin core as possible.
An rather important change for the handling of virtual desktops is that
the count and the id of a desktop is now an unsinged integer instead of
an integer. The reason for that is that we cannot have a negative count
of desktops as well as it is not possible to be on a desktop with a
negative identifier.
In that regard it is important to remember that a Client can be on a
desktop with a negative identifier. The special value for a Client being
on all desktops is handled by using -1 as a desktop. For the time being
this is not adjusted but instead of comparing the virtual desktop ids one
should prefer to use the convenient methods like isOnDesktop and
isOnAllDesktops. This would allow in future to internally change the
representation for on all desktops.
This method can be used to get the animationTime in case a configuration
class generated through KConfigXT is used. In general the configuration
stores the magic value 0 for a property "duration". This magic value
indicates that a hard-coded default value should be used.
So the common logic to test the stored value for 0 and then either pass
the stored value or the default value to animationTime is encapsulated
in this method in a generic way.
A MyEffect can use it in the following way:
animationTime<MyEffectConfig>(200);
BUG: 310646
FIXED-IN: 4.10
REVIEW: 107460
QElapsedTimer uses a monotic clock on all relevant systems
and is thus invarant against date/time changes (while the
bug was likely caused by daybreaks)
BUG: 306186
REVIEW: 107250
FIXED-IN: 4.10
use monitc clock
Add an option to kcmcompositing in the 'Advanced' tab, to enable or
disable color correction. It is specified that it's experimental and it
needs Kolor Manager.
Before painting for a particular screen, ColorCorrection::setupForOutput
should be called.
A screen property is added for WindowPaintData.
In kwinglutils, The fragment shaders are intercepted before being
compiled and they get a couple of lines of code inserted in order to do
the color correction. This happens only when color correction is enabled, of
course.
For D-Bus communication with KolorServer, everything is async.
The implementation basically manages a set of color lookup tables for
different outputs and for different window regions. These are taken via
D-Bus. Each lookup table has around 700 KB.
This commit reintroduces the changes from the former merge with the
"color2" branch. In this form, it can be easily reverted.
REVIEW: 106141
This was originally added by d467fc1bdbcf69bd6ef213bd909633c2edfb6878,
to prevent alpha ending up to be 0 with blending disabled. Apparently,
that was a driver issue that is no longer present.
REVIEW: 107090
This merge is incomplete and it does not include the review number of
the associated review request. It should have been pushed as a single
commit, because the merged commits were not intended to be published in
their form.
This reverts commit dcba90263069a221a5489b1915c5cf1ca39d090c, reversing
changes made to 50ae07525c7fde07794e7548c3d6e5a69cb1a89d.
Conflicts:
kwin/scene_opengl.cpp
kwin/scene_opengl.h
A decoration can provide the AbilityAnnounceAlphaChannel in addition to
AbilityUsesAlphaChannel. If this ability is provided the decoration can
enable/disable the use of the alpha channel through setAlphaEnabled().
The base idea behind this mechanism is to be able to tell the compositor
that currently alpha is not needed. An example is the maximized state in
which the decoration is fully opaque so that there is no need to use the
translucency code path which would render all windows behind the deco.
In addition also the blur effect honors this setting so that behind a
known opaque decoration no blurring is performed.
Oxygen is adjusted to disable translucency in maximized state and Aurorae
is adjusted to allow themes to enable/disable translucency. For Plastik
translucency and with that also blurring is disabled.
REVIEW: 106810
Use XDamageReportNonEmpty instead of XDamageReportRawRectangles.
In XDamageReportNonEmpty mode the server generates a single damage
event when the damage state transitions from not-damaged to damaged.
When the compositor is ready to paint the screen, it requests the
damage region for each window and resets the state to not-damaged.
With XCB we can request the damage regions for all windows in a
single roundtrip, making this the preferred mode.
This should reduce the number of wakeups and the time spent
processing damage events between repaints.
Adjustment to reality. KWin has had a dependency on Mesa 8.0 for quite
some time given that it is what basically all distributions ship.
It is better to clearly state what is required. For KWin Mesa 8.0 is a
more reliable dependency as all DRI drivers which do not support DRI2
have been removed.
Packagers have been informed about this intended change some weeks ago.
REVIEW: 106799
During detecting the OpenGL capabilities also a recommended compositor
can be set. This recommendation is honoured by the OpenGL based
compositors. That is the SceneOpenGL2 requires a recommendation for at
least OpenGL2 and the SceneOpenGL1 requires at least a recommendation for
OpenGL1. If the driver recommends XRender compositing the SceneOpenGL
performs the existing fallback to XRender.
With this recommendation the hacks in the Scene are removed, e.g. it is
no longer checked whether the driver is software emulation as that is
provided through the recommendation.
To overrule the recommendation the environment variable KWIN_COMPOSE is
extended by the values O1 and O2 to enforce either OpenGL 1 or OpenGL 2.
This overwrites all other checks. As a side-effect this allows now to run
KWin on the llvmpipe:
LIBGL_ALWAYS_SOFTWARE=1 KWIN_COMPOSE=O2 kwin --replace &
But not that I would recommend to use it :-)
REVIEW: 106741
If the build option is enabled KWIN_HAVE_OPENGL_1 is passed as a compile
flag when build against OpenGL.
This compile flag is meant to replace the KWIN_HAVE_OPENGLES. So far code
has been ifdefed for special behavior of OpenGL ES 2.0 and to remove
fixed functionality calls which are not available in OpenGL ES 2.0.
With this build flag the fixed functionality calls which are only used in
the OpenGL1 Compositor can be removed and keeping the KWIN_HAVE_OPENGLES
for the real differences between OpenGL 2.x and OpenGL ES 2.0.
E.g. a call like glColor4f should be in an
glColor4f(1.0, 1.0, 1.0, 1.0);
while a call like glPolygonMode should be in an
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
Building for OpenGL ES 2.0 of course implies that KWIN_HAVE_OPENGL_1 is
not defined.
VMware uses a Gallium driver which means that OpenGL based compositing
works out of the box without any adjustments to GLPlatform.
Just adding recognizing code for the SVGA3D driver.
REVIEW: 106826
OpenGL is properly working if there is a direct rendering context.
If LIBGL_ALWAYS_INDIRECT is set VirtualBox falls back to Mesa's software
rasterizer. So in order to get OpenGL the driver is now whitelisted in
the opengltest.
GLPlatform is extended to recognize the VirtualBox driver and has new
methods to report whether it is a virtual machine and VirtualBox. The
detection is rather limited as we don't get access to the underlying
hardware, so we do not know whether the features are really supported.
We need to trust the driver here in announcing the right extensions.
The driver does not provide glxQueryDrawable although it is part of
GLX 1.3. A hack is added in the glxbackend to set the function pointer to
NULL. This can unfortunately not be done in glxResolveFunctions() as
QueryDrawable seems not to be provided by an extension (at least not
listed in the OpenGL registry) and getProcAddress resolves a function but
it only prints an OpenGL Warning to stderr.
As a note: the driver reports that it is using XSHM for
GLX_EXT_texture_from_pixmap.
REVIEW: 106821
Note to me: always rebuild with all possible build options if something
is changed.
Sorry for the inconvenience and thanks to the early report of the issue.
BUG: 307866
FIXED-IN: 4.10
According to the OpenGL ABI for Linux GLX 1.3 is a minimum requirement.
Therefore we do not need to resolve the symbols which are present in that
version.
KWin did always require at least 1.3, for all the resolved functions
there were checks in the Scene, but they might have been incorrect.
Instead now the GLX version is checked and OpenGL compositing is blocked
if there is not at least GLX 1.3.
REVIEW: 106704
glBlendColor has been added to OpenGL 1.2 which means it is part of
the OpenGL ABI defined for Linux.
See http://www.opengl.org/registry/ABI/ section 3.4.
The macro GL_RESOLVE_WITH_EXT was fundamentally broken as it tried to
resolve a symbol first by it's name and then by the extension name if
the returned pointer is null.
From GLX spec:
"A non-NULL return value for glXGetProcAddress does not guarantee that an
extension function is actually supported at runtime. The client must also query
glGetString(GL EXTENSIONS) or glXQueryExtensionsString to determine if an
extension is supported by a particular context."
This macro is now reworked to be used only in case the symbol name does
not match our function name. E.g. glUniform1f vs glUniform1fARB.
The resolving itself also had quite some issues as:
* in same cases function pointers are not nulled
* in same cases only the arb or only the ext is checked
* in same cases the wrong extension is checked
This is now reworked to always check first the ARB extension if available
then the EXT extension and if both are not available the pointers are set
to NULL.
The Egl backend is decoupled from the OpenGL ES build option which makes
it possible to use it as a replacement for glx.
To make this possible a new build flag is added when egl is available at
compile time and any egl specific code is now ifdefed with this flag
instead of the gles flag. In addition at runtime a windowing system enum
value is passed to the various detect methods to have egl/glx specific
detection for e.g. function pointer resolving.
By default egl is used if compiled with OpenGL ES, otherwise glx is used.
But in the non-gles case the windowing system can be selected through the
new environment variable KWIN_OPENGL_INTERFACE. Setting this variable to
"egl" the EglOnXBackend is used.
REVIEW: 106632
The ShaderBinder class can be used for the case that a block of code
should be executed with a given Shader being bound. This is useful for
all the cases where there is a if-block for OpenGL2 execution with a
Shader being pushed in the first line to the ShaderManager and popped in
the last line of the block. With the helper this can be simplified to:
ShaderBinder binder(myCustomShader);
or
ShaderBinder binder(ShaderManager::GenericShader);
The ctor of ShaderBinder pushes the given Shader to the stack and once
the helper goes out of scope it will be popped again from the stack.
In addition the helper can take care of OpenGL 1 compositing, that is it
just does nothing. So it can also be used where there is a shared OpenGL1
and OpenGL2 code path where the Shader should only be pushed in OpenGL2.
This basically removes all the checks for the compositing type before
pushing/popping a Shader to the stack.
REVIEW: 106521
The main usage of ShaderManager::isValid was to have OpenGL2 specific
code pathes. Now we have an actual OpenGL2Compositing type and we know
that the ShaderManager is valid if we have this compositing type and we
know that it is not valid on OpenGL1Compositing. This gives us a much
better check and allows us to use the isValid method just for where we
want to check whether the shaders compiled successfully.
In addition some effects require OpenGL2, so we do not need to check
again that the ShaderManager is valid. Such usages are removed.
The CompositingType enum turns into flags and two new values are
introduced: OpenGL1Compositing and OpenGL2Compositing.
Those new values are or-ed to OpenGLCompositing so that a simple check
for the flag OpenGLCompositing works in case of one of those two new
values. To make the generic check for OpenGL compositing easier a method
in EffectsHandler is introduced to just check for this.
The scenes now return either OpenGL1Compositing or OpenGL2Compositing
depending on which Scene implementation. None returns OpenGLCompositing.
Results in cleaner changes.
Put all the color correction stuff from SceneOpenGL in SceneOpenGL2.
Conflicts:
kwin/eglonxbackend.cpp
kwin/glxbackend.cpp
kwin/scene.h
kwin/scene_opengl.cpp
kwin/scene_opengl.h
SceneOpenGL turns into an abstract class with two concrete subclasses:
* SceneOpenGL1
* SceneOpenGL2
It provides a factory method which first creates either the GLX or EGL
backend which is passed to a static supported() method in the concrete
sub classes. These method can test whether the backend is sufficient to
be used for the OpenGL version in question. E.g. the OpenGL 2 scene
checks whether the context is direct.
The actual rendering is moved into the subclasses with specific OpenGL 1
and OpenGL 2 code. This should make the code more readable and requires
less checks whether a Shader is bound. This is now known through the
Scene: the OpenGL1 scene will never have a shader bound, the OpenGL2 scene
will always have a shader bound.
To make this more reliable the ShaderManager is extended by a disable
method used by SceneOpenGL1 to ensure that the ShaderManager will never
be used. This also obsoletes the need to read the KWin configuration
whether legacy GL is enabled. The check is moved into the supported
method of the OpenGL2 scene.
REVIEW: 106357
The implementation consists of a class in libkwineffects.
There are some slight modifications in the compositor. Regions for
different outputs are drawn at different times.
Currently only per output color correction is implemented. However, the
grounds are prepared for implementing per window color correction
easily.
The ColorCorrection class needs to communicate via D-Bus with a KDED
module, KolorServer, which is a part of KolorManager.
The only visible part for the user consists of a check box in the
advanced tab for the compositing KCM.
The actual correction is done by injecting a piece of code in the
fragment shader, code that does a 3D lookup into a special color lookup
texture. The data for these textures is obtained from KolorServer. All
D-Bus calls are async.
Currently the GL Matrix Stack is also used with OpenGL 2.
That is pushMatrix, multMatrix and popMatrix are executed
although this does not influence the rendering at all. The
OpenGL 1 matrices are not passed to the shaders.
With this change the calls to the matrix stack are no longer
executed if the Shader based backend is used. This means we
have a few less matrix multiplications in the rendering.
Mostly affects a few effects which have not yet completely be
ported over to OpenGL 2.
BUG: 303093
FIXED-IN: 4.10
REVIEW: 105455
The public member variables for opacity, saturation and brightness
are removed in favor for getter and setters. The variables are
moved into a private class. Those are now qreal instead of double.
To make usage inside the effects easier a multiply method is added
which multiplies the current value with passed in factor and returns
the new value in a functional programming style.
This commit is the top-most of a patch series to refactor
ScreenPaintData and WindowPaintData. Other related commits are:
* 0811772
* ebdc7ec
* 2c8dd8d
* 7699726
* 68e0201
* 611cb09
REVIEW: 105141
BUG: 303314
FIXED-IN: 4.10
No effect has ever made use of contents opacity. Which means it
is not needed. Removing means faster effects as we used to
multiply the value (always 1.0) with the opacity in each frame
for each window.
New properties for the current activity and the available
activities plus related signals in scripts. Signals added to
effects.
BUG: 302060
FIXED-IN: 4.9.0
m_textureNPOT and m_limitedNPOT have not been initialized in the ctor resulting in
m_limitedNPOT being incorrectly being true sometimes for Intel drivers. For other
drivers the value had been set.
A CMake variable is used to specify the name of the binary.
By default this is "kwin" but building for PA changes the
name to "kwinactive". The variable adjusts all names, e.g.
kwinnvidiahack becomes kwinactivenvidiahack.
The remaining usage of kwinrc in core and libs is replaced
by a cmakedefine for the configuration name and all data
installations are moved to the defined name. Dynamic loading
for scripts & co is adjusted for loading based on defined name.
This change allows the side-by-side installation of both kwin
for desktop and kwin for Plasma Desktop without the known
issues like conflicts in config files or missing build options
if kwin desktop is used for Plasma Active.
Likewise the KCMs are not adjusted as they are not intended to
be used for kwinactive.
REVIEW: 104299
BUG: 296084
FIXED-IN: 4.9.0
CCMAIL: active@kde.org
Additional TabBox Mode which allows to switch between all open
windows of the current selected application. By default Alt+tilde
is used which is on qwerty just one key above tab. For non-qwerty
layouts the shortcut is unfortunately not convenient.
REVIEW: 104730
FEATURE: 299308
FIXED-IN: 4.9.0
This makes kwin in OpenGL2 mode more coherent with kwin_gles.
Despite some fullscreen effects they should now make the same
(pure) OpenGL calls.
REVIEW: 103804
Simplifies the API. An FPx2 can be defined as a single real value
or a complex object with two real values:
{
value1: 1.0,
value2: 2.0
}
For a default ctor a null value can be used.
Scripted effects follow the Plamsoid package structure and the effect
loader recognizes a scripted effect at the according line in the desktop
file. If it is a scripted effect a different loader is used which
instantiates an object of the ScriptedEffect class. This class inherits
the AnimationEffect and exports the animate method and the EffectsHandler.
A few more getters for parsed information are added to GlPlatform.
This includes the driver information retrieved through glGetString
and information like direct rendering and loose binding.
Additionally the methods to convert version, driver and chipClass
to string are added to the public interface.
These changes allow parts outside GlPlatform to get the same debug
information about the GL system.
This patch adds a new function Toplevel::addLayerRepaint, that in contrast
to addWorkspaceRepaint does not invalidate every blur texture cache that
overlaps with that region. As the name suggests it rather invalidates the
to the window associated layer at that position. This is especially useful
in the case of move/resize events in combination with oxygen-transparent,
where the altered window is almost always the topmost window and the blur
texture cache of the windows underneath are unchanged.
For the case of fully opaque windows the behaviour of addLayerRepaint
and addWorkspaceRepaint should be same.
REVIEW: 103906
This patch changes the behavior of strictly bound textures such that
they are only updated if the corresponding window has been damaged.
Additionally GLTexture now keeps track of the current filter and
wrapmode setting.
REVIEW: 103655
Property invokes virtual methods returning false by default. Deleted
reimplements the isDeleted and returns true. Client returns true for
isClient. Method is not called isManaged as this is already used
inside Client.
If possible use the property to Toplevel or Client instead of the
pure virtual methods. This makes it easier to get a stable ABI.
Adding new methods to the class no longer requires to add a pure
virtual method.
From a performance point of view this change should not matter.
Most EffectWindow methods are not invoked during the repaint chain.
But only in response to an event like a window got added. There the
overhead does not really matter as well the previous implementation
made strong use of dynamic casts which are also not knwon for being
very fast.
This patch reduces the number of QRegion and WindowQuadList operations
by drawing the opaque and translucent parts of the window within the
same bottom to top pass.
REVIEW: 103671
