All KCMs and KWin core use the BuiltInEffects namespace to find and
interact with the effects. There is no information left in the desktop
file which are of usage. Thus they can be removed.
This method replaces the X-KDE-ORDERING property in the Effect's desktop
files. This change is a preparation step for integrating the new Effect
Loader which doesn't read the ordering information. Thus it needs to be
provided by the Effect itself so that the EffectsHandler can properly
insert it into the chain.
Also for the built-in Effects on the long run it doesn't make much sense
to install the desktop files. And binary plugin effects will migrate to
json metadata which also doesn't have the KService::Ptr. Thus overall it
simplifies to read this information directly from the Effect.
Most is just switched to the ::read(). That should be enough for all the
Effects which have a KSharedConfig::Ptr underneath. If not we just need
to find a good place to put the reload.
Instead of using EffectsHandler::sendReloadMessage we generate the dbus
interface in each plugin and call the reconfigure slot directly. That way
it's more type safe and we don't need to link kwineffects from the
configs.
REVIEW: 116875
There are no advantages for the effects KCM to have all the effect
config modules in one plugin.
By having a plugin per effect we can use the KPluginTrader to easily
find the configuration plugin for a given effect and load it.
To make this possible the following changes are done:
* config_builtins.cpp is deleted
* add_subdirectory is used for all effects which have a config module
* toplevel CMakeLists.txt contains the sources again for the effects
which have a config module, but effects which don't have a config
module are still included and thus the macro is still used
* plugin created for the config module, name pattern is:
kwin_effectname_config
* plugin installed to ${PLUGIN_INSTALL_DIR}/kwin/effects/configs
* desktop file adjusted to new plugin name and keyword removed
* desktop file converted to json as meta data and no longer installed
* Uses K_PLUGIN_FACTORY_WITH_JSON
* Macros for config are dropped from kwineffects.h
REVIEW: 116854
X-KWin-Internal should be used for effects which are either internal
to KWin and are configured at a different location in KWin. Examples
are:
* CoverSwitch - configured in WindowSwitcher KCM, but not FlipSwitch
as that one has a non WindowSwitcher mode
* window geometry - configured in moving
And it should also be used for helper effects to the overall
kde-workspace module. Examples are:
* Dashboard - required by Plasma
* KScreen - required for KScreen
* Screenshot - required by KSnapshot
Why a new category and not the already existing NoShow property?
The idea is to just filter on the effects in the list. Thus it should
be possible to show them. But NoShow is clearly intended to not be
shown at all.
REVIEW: 116754
KWin already has a de facto OpenGL 2 dependency through QML. Combined
with the fact that the OpenGL 1 backend is basically unmaintained and
also unused, it's better to remove it for the new major release.
This change includes:
* Removal of cmake option KWIN_BUILD_OPENGL_1_COMPOSITING
* Removal of KWIN_HAVE_OPENGL_1 compile option and all code
ifdef'ed with it (partially removal of if-else constructs)
* Removal of CompositingType::OpenGL1Compositing (flags are kept
as a core flag should get introduced)
* Driver recommendation for OpenGL1Compositing changed to XRender
(should be evaluated whether the drivers can provide GL2)
* Removal of configuration option "GLLegacy"
* Removal of fooMatrix function in kwinglutils
* Removal of ARBBlurShader
* Removal of legacy code path in GLVertexBuffer
* Removal of GLShaderManager::disable
* if-blocks with ShaderManager::instance()->isValid() removed
REVIEW: 116042
Rational behind this change is that displayWidth and displayHeight are
X specific API calls in kwinglobals. For the future it's easier to only
rely on functionality which goes through the EffectsHandler API which
allows easier adjustments in KWin core.
displayWidth() and displayHeight() are only used to get the size or the
complete rect of all screens. This is also provided by:
effects->virtualScreenGeometry() or
effects->virtualScreenSize()
REVIEW: 116021
As all effects have always been compiled into the same .so file it's
questionable whether resolving the effects through a library is useful
at all. By linking against the built-in effects we gain the following
advantages:
* don't have to load/unload the KLibrary
* don't have to resolve the create, supported and enabled functions
* no version check required
* no dependency resolving (effects don't use it)
* remove the KWIN_EFFECT macros from the effects
All the effects are now registered in an effects_builtins file which
maps the name to a factory method and supported or enabled by default
methods.
During loading the effects we first check whether there is a built-in
effect by the given name and make a shortcut to create it through that.
If that's not possible the normal plugin loading is used.
Completely unscientific testing [1] showed an improvement of almost 10
msec during loading all the effects I use.
[1] QElapsedTimer around the loading code, start kwin five times, take
average.
REVIEW: 115073
* "" needs to be wrapped in QStringLiteral
* QString::fromUtf8 needed for const char* and QByteArray
* QByteArray::constData() needed to get to the const char*
Shader moved to 1.10 subdirectory and a new version for 1.40 added.
At the same time call to glPolygonMode removed as it caused errors with
core context (and seems to not be needed).
REVIEW: 110572
With the removal of BoxSwitch all effects which want mouse events use the
fullscreen input window. The available functionality is too complex both
in EffectsHandler and in the Effects.
With this change only fullscreen input windows are supported and all
effects share the input window. This means there is at maximum one input
window. This simplifies the code in the Effects as they don't have to
keep track of the window they created any more. In EffectsHandler it
means that only one window needs to be created, destroyed and raised.
Also it means that we can properly react on screen size changes which had
been ignored in the past. Also quite some roundtrips to X are no longer
needed as we do not need to query the window geometry when creating the
input window.
REVIEW: 110156
The usage has always been questionable as the thumbnails are
too small to properly recognize something.
Now BoxSwitch Effect has reach its end of life which would have
required to keep most of the code just for this thumbnail bar.
If required it would be better to integrate the normal QML based
TabBox to be rendered together with an effect.
BUG: 296070
FIXED-IN: 4.11.0
Many headers included KLocale to use i18n and co. But those methods are
defined in KLocalizedString and not in KLocale.
With KF5 klocale.h does no longer include KLocalizedString causing lots
of compile errors.
This method can be used to get the animationTime in case a configuration
class generated through KConfigXT is used. In general the configuration
stores the magic value 0 for a property "duration". This magic value
indicates that a hard-coded default value should be used.
So the common logic to test the stored value for 0 and then either pass
the stored value or the default value to animationTime is encapsulated
in this method in a generic way.
A MyEffect can use it in the following way:
animationTime<MyEffectConfig>(200);
BUG: 310646
FIXED-IN: 4.10
REVIEW: 107460
If the build option is enabled KWIN_HAVE_OPENGL_1 is passed as a compile
flag when build against OpenGL.
This compile flag is meant to replace the KWIN_HAVE_OPENGLES. So far code
has been ifdefed for special behavior of OpenGL ES 2.0 and to remove
fixed functionality calls which are not available in OpenGL ES 2.0.
With this build flag the fixed functionality calls which are only used in
the OpenGL1 Compositor can be removed and keeping the KWIN_HAVE_OPENGLES
for the real differences between OpenGL 2.x and OpenGL ES 2.0.
E.g. a call like glColor4f should be in an
glColor4f(1.0, 1.0, 1.0, 1.0);
while a call like glPolygonMode should be in an
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
Building for OpenGL ES 2.0 of course implies that KWIN_HAVE_OPENGL_1 is
not defined.
The main usage of ShaderManager::isValid was to have OpenGL2 specific
code pathes. Now we have an actual OpenGL2Compositing type and we know
that the ShaderManager is valid if we have this compositing type and we
know that it is not valid on OpenGL1Compositing. This gives us a much
better check and allows us to use the isValid method just for where we
want to check whether the shaders compiled successfully.
In addition some effects require OpenGL2, so we do not need to check
again that the ShaderManager is valid. Such usages are removed.
The CompositingType enum turns into flags and two new values are
introduced: OpenGL1Compositing and OpenGL2Compositing.
Those new values are or-ed to OpenGLCompositing so that a simple check
for the flag OpenGLCompositing works in case of one of those two new
values. To make the generic check for OpenGL compositing easier a method
in EffectsHandler is introduced to just check for this.
The scenes now return either OpenGL1Compositing or OpenGL2Compositing
depending on which Scene implementation. None returns OpenGLCompositing.
The supportInformation is extended to also read the properties
on all effects. In addition each effect can be queried just for
itself through D-Bus, e.g.:
qdbus org.kde.kwin /KWin supportInformationForEffect kwin4_effect_blur
All effects are extended to provide their configured and read
settings through properties. In some cases also important
runtime information is exposed.
REVIEW: 105977
BUG: 305338
FIXED-IN: 4.9.1
* KDE/4.9:
Fix callback race in the session save and shutdown code.
Update for 4.9.0 release
SVN_SILENT made messages (.desktop file)
SVN_SILENT made messages (.desktop file)
Fix regression in QML shutdown menu. Ampersands should be removed from menu entries' text by default.
Fix typos in a message that broke string freeze.
Fix potential parallel build failure.
Conflicts:
CMakeLists.txt
The public member variables for opacity, saturation and brightness
are removed in favor for getter and setters. The variables are
moved into a private class. Those are now qreal instead of double.
To make usage inside the effects easier a multiply method is added
which multiplies the current value with passed in factor and returns
the new value in a functional programming style.
This commit is the top-most of a patch series to refactor
ScreenPaintData and WindowPaintData. Other related commits are:
* 0811772
* ebdc7ec
* 2c8dd8d
* 7699726
* 68e0201
* 611cb09
REVIEW: 105141
BUG: 303314
FIXED-IN: 4.10
Effects can specify their minimum requirements in their
desktop file:
* OpenGL
* OpenGL 2 (GLSL required)
* Shaders (either ARB or OpenGL 2)
The configuration module uses this information in combination
with which backend KWin is currently using. So if e.g. OpenGL
is used and an effect requires OpenGL 2 a detailed error
message can be showed that OpenGL 2 is required.
BUG: 209213
FIXED-IN: 4.9.0
REVIEW: 104847
Additional TabBox Mode which allows to switch between all open
windows of the current selected application. By default Alt+tilde
is used which is on qwerty just one key above tab. For non-qwerty
layouts the shortcut is unfortunately not convenient.
REVIEW: 104730
FEATURE: 299308
FIXED-IN: 4.9.0
Creating an EffectFrame requires I/O which takes on my system
during testing between 10 and 40 msec. Also it needs a little
bit of memory.
This changes moves out the creation of EffectFrames at Effect
load till the Effect actually needs the EffectFrame. E.g. if a
user does not filter in PresentWindows there is no need to ever
create it.
BoxSwitch effect is ignored as it should be dropped for 4.9.
REVIEW: 104815
For the normal TabBox the TabBoxClient's icon method is
adjusted to use the "user-desktop" icon instead of the
window icon.
For the effects a method to set the caption is extended
to also set the icon on the caption frame.
REVIEW: 104444
FlipSwitch can be navigated with up and down keys as well
as left/right and CoverSwitch only with left and right
keys while Alt+Tab is used.
REVIEW: 104438
FEATURE: 178595
FIXED-IN: 4.9.0
Each effect is able to declare itself as currently being active,
that is transforming windows or painting or screen or doing anything
during the current rendered frame.
This change eliminates the hottest path inside KWin identified by
callgrind.
REVIEW: 102449
Reflection in a vertical multiscreen setup are kind of broken without
PaintClipper. But we have to ask ourselfe whether CoverSwitch in a
vertical multi screen setup makes sense and whether it's useful to
have reflections in such a setup.
Horizontal multiscreen setup works fine (also with reflections).
The KWin::TimeLine class was only a small wrapper around QTimeLine
without adding anything to QTimeLine what is not present in QTimeLine.
The initial idea was to make it possible to provide more curve shapes.
This is now obsoleted by Qt shipping more useful curves with QTimeLine.
So let's clean up a little bit and use QTimeLine directly instead of
the small wrapper.
All effects are adjusted to use QTimeLine directly.
EffectsHandlerImpl just forwards the signals from TabBox. In order
to have a valid pointer to the TabBox, the TabBox is now initialized
before compositing in Workspace.
Client and Unmanaged use a signal to notify that they are about to be closed.
The EffectsHandlerImpl is connected to those signals and emits the appropriate
windowClosed signal to which the effects are connected.
The vertex buffer implementation uses the shader manager to decide
whether core painting should be used or not. Shader manager is only
used by shaders using vertex attributes instead of gl_Vertex etc.
CoverSwitch uses new concept of combining a custom fragment shader with the
built-in generic vertex shader. This shader is used to render the reflection
plane on top of the reflected windows.
The fragment shader uses two uniform colors for front and back and interpolates
between them based on the texcoords (which are not used for texture lookup).
The reflection plane vertices could be buffered.
svn path=/trunk/KDE/kdebase/workspace/; revision=1213663
The following changes were in SVN, but were removed from git:
M wallpapers/Air/metadata.desktop
M wallpapers/Autumn/metadata.desktop
M wallpapers/Blue_Wood/metadata.desktop
M wallpapers/Grass/metadata.desktop
M wallpapers/Hanami/metadata.desktop
M wallpapers/Horos/metadata.desktop
M wallpapers/Media_Life/metadata.desktop
M wallpapers/Plasmalicious/metadata.desktop
M wallpapers/Quadros/metadata.desktop
