Summary:
Effects::checkInputWindowEvent(QWheelEvent *e) existed but it was not
hooked up to anything and would never be called.
This patch adds the relevant handling in the wayland filter, X filter so
the existing method gets called.
EffectQuickView is updated to handle wheel events.
Test Plan:
Used a ListView via an EffectQuickView in an effect.
I can now scroll with the mouse.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D25292
Summary:
Removes a tonne of complex code, means any future improvements to our
QtQuick integration only need to be in one place.
QML logic remains in Aurorae as it does complex things. All other
aurorae specialties remain.
Only functional difference is that we now use a shared GL context
between window frames, which Plasma::FrameSVG will make use of.
Test Plan:
kcmshell5 kwindecoration
ran some aurorrae themes on my kwin. Look the same as master
Reviewers: #kwin, mart
Reviewed By: mart
Subscribers: mart, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D25206
Summary:
Compositing in X11 was done time shifted, meaning that we paint first, then
wait one vblank interval length and present on prepareRenderingFrame the
previous paint result. This is supposed to make sure we don't miss the vblank
and in case of block till retrace be able to continue issuing commands and
only shortly before next vblank present.
This is counter-intuitiv, not how we do it on Wayland or even on MESA with X.
The reason seems to be that the GLX backend was in the beginning written
against Nvidia proprietary driver which needed this but nowadays even this
driver defaults to non-blocking behavior on buffer swap.
Therefore remove this legacy anomaly fully and directly present after paint.
We then wait one refresh cycle and in the future can optimize this by delaying
the paint and present till shortly before vsync.
Test Plan: kwin_x11 tested on i915 and Nvidia proprietary driver.
Reviewers: #kwin
Subscribers: zzag, alexeymin, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D23514
Summary:
Selecting not to vsync does not make sense for an X11 compositor. In the end
we want clients to be able to present async if they want to but the compositor
is supposed to send swaps with vsync to the XServer in order to not generate
tearing artifacts.
There was also a detection logic which did some questionable things in case
vsync was not available. I don't think this is necessary at all since we can
just always run a timer to present with or without vsync.
Test Plan: kwin_x11 tested on i915.
Reviewers: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D23511
Summary:
Current hardware should suppport either GLX_EXT_swap_control or
GLX_MESA_swap_control. To simplify code remove the usage of SGI extensions.
Test Plan: kwin_x11 tested on i915.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: davidedmundson, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D23510
Summary:
It is not clear what the advantage of triple buffering is for KWin. An X11
compositor is meant to swap buffers once every monitor cycle. For that triple
buffering is not necessary.
The functionality is not maintained, does not reliably work as displayed by
the existence of an environment variable to force some behavior, pollutes
our code and every compositing-related problem that might be mitigated with
triple buffering should find a simpler and more fitting solution with other
means.
There is one caveat which is if we shall block for retrace. We set it
currently according to the result of the swap profiler and in the most common
case with double buffering it is set to true. But on Nvidia systems this might
be actual the wrong behavior. Instead of trying to work around this ignore
the issue for now and move the overall architecture to something less complex
by presenting after paint how we do it in the Wayland DRM backend and with
double buffering on GLX (although this is at the moment also borken because
we actually present then twice).
Test Plan: kwin_x11 tested on i915.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, fredrik, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D23504
Summary:
We support the stable xdg-shell protocol nowadays. So use this one instead of
version 6 unstable.
Test Plan:
Runs with other recent patches in KWin nested. In Weston nested session still
not yet working.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D25129
Summary:
Per protocol a zero-size can be sent indicating that the client should resize
its surface to its liking. For now change the code such that it at least sends
the ack-configure back and leaves the current size untouched.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D25128
Summary:
After setting the xdg-surface role an initial commit must be sent per
protocol description.
This fixes Wayland nested session after commit 84de8d135d made this
requirement explicit.
Test Plan: Launched Wayland nested session.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D25127
Summary:
With recent Mesa updates (19.2.1), MESA_EGL_NO_X11_HEADERS doesn't have
any effect. So, let's include fixx11h.h instead.
Test Plan: I am able to build kwin once again.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24840
Summary:
The initial blank needs to happen after the output device has been
initialized to get the current mode size.
Also we can't assert in legacy mode on the page flip pending since
a page flip can also be the result of a CRTC blank using a different.
BUG: 412684
FIXED-IN: 5.17.1
Test Plan: Full Plasma session
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24829
Summary:
With recent Mesa updates (19.2.1), MESA_EGL_NO_X11_HEADERS doesn't have
any effect. So, let's include fixx11h.h instead.
Test Plan: I am able to build kwin once again.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24840
Summary:
This is necessary to keep openQA working, which uses LLVMpipe as a
renderer on a Cirrus device that operates in depth 16.
LLVMpipe advertises 24/32 bit sRGB configurations on this setup, but
they cannot be presented.
CCBUG: 408594
Test Plan: Compile tested only.
Reviewers: fvogt, #kwin, zzag
Reviewed By: fvogt, #kwin, zzag
Subscribers: romangg, sbergeron, fvogt, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22203
Summary:
Context behaviour subtly changed in Qt5.14 which has exposed some
questionable things in this KCM.
Auorae::Decoration is a context property of the loaded QML.
QObject::~QObject signals it's own deletion before deleting children.
This means the bindings of loaded QML update in particular
aurorae.qml
DecorationOptions {
id: options
deco: decoration
}
DecorationOptions has a pointer to the previously set decoration which
is now dangling, and we crash.
Rather than adding more guards and smart pointers in DecorationOptions,
this patch deletes the QQmlContext before deleting the context
properties that we expose.
It also moves unreferring the shared qmlcontext we inherit from till
after we've deleted the child context, because it didn't make sense.
Test Plan:
Opened KCM
Closed the KCM
didn't crash
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24594
Summary:
Rotation in the past was not working in the DRM backend reliable. Now on 5.17
it even freezes the KWin session, so for now we need to just disable it trying.
Test Plan:
Tried to change Rotation with KScreen. Nothing happened but session was still
usable afterwards.
Reviewers: #kwin
Subscribers: ngraham, jriddell, bshah, zzag, apol, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24112
Summary:
Everything is already multiplied in the buffer, we want to copy the
source directly.
Test Plan:
Looked at something with EffectQuickView and alpha
It now matched what it should be
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24368
Summary:
In order to properly implement xdg_surface.set_window_geometry we need
two kinds of geometry - frame and buffer. The frame geometry specifies
visible bounds of the client on the screen, excluding client-side drop
shadows. The buffer geometry specifies rectangle on the screen that the
attached buffer or x11 pixmap occupies on the screen.
This change renames the geometry property to frameGeometry in order to
reflect the new meaning assigned to it as well to make it easier to
differentiate between frame geometry and buffer geometry in the future.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24334
In file included from /build/src/kwin-5.16.90/plugins/platforms/hwcomposer/hwcomposer_backend.cpp:21:
/build/src/kwin-5.16.90/plugins/platforms/hwcomposer/hwcomposer_backend.h:58:11: error:
'QSize KWin::HwcomposerOutput::pixelSize() const' marked 'override', but does not override
58 | QSize pixelSize() const override;
| ^~~~~~~~~
Fixes dbb2cede08
Reviewed-by: Bhushan Shah <bshah@kde.org>
Summary:
There's no point for calling discardShape from the destructor of a
Scene::Window subclass because window quads cache will be destroyed
automagically by QScopedPointer.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24317
Summary:
EffectQuickView/Scene is a convenient class to render a QtQuick
scenegraph into an effect.
Current methods (such as present windows) involve creating an underlying
platform window which is expensive, causes a headache to filter out
again in the rest of the code, and only works as an overlay.
The new class exposes things more natively to an effect where we don't
mess with real windows, we can perform the painting anywhere in the view
and we don't have issues with hiding/closing.
QtQuick has both software and hardware accelerated modes, and kwin also
has 3 render backends. Every combination is supported.
* When used in OpenGL mode for both, we render into an FBO export the
texture ID then it's up to the effect to render that into a scene.
* When using software QtQuick rendering we blit into an image, upload
that into a KWinGLTexture which serves as an abstraction layer and
render that into the scene.
* When using GL for QtQuick and XRender/QPainter in kwin everything is
rendered into the internal FBO, blit and exported as an image.
* When using software rendering for both an image gets passed directly.
Mouse and keyboard events can be forwarded, only if the effect
intercepts them.
The class is meant to be generic enough that we can remove all the
QtQuick code from Aurorae.
The intention is also to replace EffectFrameImpl using this backend and
we can kill all of the EffectFrame code throughout the scenes.
The close button in present windows will also be ported to this,
simplifiying that code base.
Classes that handle the rendering and handling QML are intentionally
split so that in the future we can have a declarative effects API create
overlays from within the same context. Similar to how one can
instantiate windows from a typical QML scene.
Notes:
I don't like how I pass the kwin GL context from the backends into the
effect, but I need something that works with the library separation. It
also currently has wayland problem if I create a QOpenGLContext before
the QPA is set up with a scene - but I don't have anything better?
I know for the EffectFrame we need an API to push things through the
effects stack to handle blur/invert etc. Will deal with that when we
port the EffectFrame.
Test Plan: Used in an effect
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24215
Summary:
Qt's metaobject is rather sensitive with scope resolution.
Foo::Bar and Bar don't always match to a Qt metaobject, even if they
refer to the same thing to a compiler. Here we register
X11Compositor::SuspendReason but Q_ARG uses SuspendReason and they don't
match. This leads to a runtime failure where the method isn't invoked.
Rather than fixing metaobject usage, port the whole thing to lambdas
which does better compile time checking and is generally nicer to read.
BUG: 412353
Test Plan:
Ran xprop to block compositing. Compositing was blocked.
Grepped source code for Q_ARG use
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24244
Summary:
Currently each managed X11 client is represented with an instance of
Client class, however the name of that class is very generic and the
only reason why it's called that way is because historically kwin
was created as an x11 window manager, so "Client" was a sensible choice.
With introduction of wayland support, things had changed and therefore
Client needs to be renamed to X11Client in order to better reflect what
that class stands for.
Renaming of Client to X11Client was agreed upon during the last KWin
sprint.
Test Plan: Compiles, the test suite is still green.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: romangg, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24184
Summary:
Lot of mobile devices, as well as tablet devices use the DSI connector,
for internal screens. This is more common in ARM devices, so consider
them as internal display as well.
Test Plan: checked on the device with DSI screen, it was considered internal
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24209
Summary:
Rename ShellClient to XdgShellClient in order to reflect that it
represents only xdg-shell clients.
Test Plan: Compiles, tests still pass.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23589
Summary: wl-shell is deprecated and its support was dropped in kwin.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23563
Summary:
So far wayland was used by internal clients to submit raster buffers
and position themselves on the screen. While we didn't have issues with
submitting raster buffers, there were some problems with positioning
task switchers. Mostly, because we had effectively two paths that may
alter geometry.
A better approach to deal with internal clients is to let our QPA use
kwin core api directly. This way we can eliminate unnecessary roundtrips
as well make geometry handling much easier and comprehensible.
The last missing piece is shadows. Both Plasma::Dialog and Breeze widget
style use platform-specific APIs to set and unset shadows. We need to
add shadows API to KWindowSystem. Even though some internal clients lack
drop-shadows at the moment, I don't consider it to be a blocker. We can
add shadows back later on.
CCBUG: 386304
Reviewers: #kwin, davidedmundson, romangg
Reviewed By: #kwin, romangg
Subscribers: romangg, kwin
Tags: #kwin
Maniphest Tasks: T9600
Differential Revision: https://phabricator.kde.org/D22810
Summary:
Because KWin is a very old project, we use three kinds of null pointer
literals: 0, NULL, and nullptr. Since C++11, it's recommended to use
nullptr keyword.
This change converts all usages of 0 and NULL literal to nullptr. Even
though it breaks git history, we need to do it in order to have consistent
code as well to ease code reviews (it's very tempting for some people to
add unrelated changes to their patches, e.g. converting NULL to nullptr).
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson, romangg
Reviewed By: #kwin, davidedmundson, romangg
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23618
Summary:
In some environemnts it is possible that udev detection of primary GPU
fails and it picks the first available card (normally card0). But it is
not desired, and it would be required to use different card (card1).
Introduce environment variable, which when used, will make it possible
to use different card node then one selected by udev.
You can use it like KWIN_DRM_DEVICE_NODE=/dev/dri/card1 kwin_wayland
Test Plan: Tested on the device where card0 was not usable for kms, but card1
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D24051
We have lots of inconsistency at the moment in CMakeLists.txt files. Most
of it is due to kwin being a very old project. This change hopefully fixes
all of it.
Summary:
With nearest filter fractional scaling is blurry, always use linear filter
instead on Wayland.
Test Plan: Run Plasma session with patch and scale factor 1.9.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T10481
Differential Revision: https://phabricator.kde.org/D23986
Summary:
We repeat quite a lot of code that finds an output by xcb_window_t and
translates global X11 screen coordinates to output coordinates.
Test Plan: Compiles.
Reviewers: #kwin, gladhorn
Reviewed By: #kwin, gladhorn
Subscribers: gladhorn, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23947
Summary:
This patch further refines output management.
We go now through AbstractWaylandOutput virtual functions to enable and
disable outputs.
Dpms changes and enablement switches use separate code paths at start in the
Drm backend code since they are similar but not the directly same. Common code
is shared though, functions are renamed accordingly.
Asserts have been put in place to better understand and check the control
flow. A seemingly unnecessary call to DrmOutput::pageFlipped on reactivation
after Vt switch has been removed to allow for that.
In future patches we need to look additionally at the legacy mode switching
code path which was and is still not working and better handling of the
current monitor Dpms state. For example a monitor being switched off is not
properly acted on and the workspace still expanded.
Test Plan:
With one and two monitors:
* Dpms off/on
* Vt switches
* Screen disable/enable
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23600
Summary:
Make it more explicit what the relation is between Wayland and XDG objects
existing and enablement:
The ouput is enabled if and only if Wayland and XDG output objects exist.
We can simplify the code by replacing checks on the outputs with checking
the current enablement value.
Test Plan: Wayland nested and virtual backends.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23553
Summary:
This lifts the enablement code for outputs from the DRM backend to Platform
allowing other Wayland backends in the future to use this interface as well.
To do that we also create some helper functions on Platform level and have to
spill some KWayland classes into AbstractOutput what motivates a further split
of Platform into a Wayland child class like for AbstractOutput.
Test Plan: Disabled and enabled an output in DRM session.
Reviewers: #kwin
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23545
Summary:
Since we now use in the backends the OutputDeviceInterface for output data
all access must be complete before the Wayland server goes down. For that
introduce a new function to prepare shutdown in the backends.
While at it also remove the output deletion, since they get deleted through
Qt's object system leading to crashes on double free.
Test Plan: Shutdown works without seg faults in the Drm backend.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23602
Summary:
Switch to Q_ASSERT in order to make code a bit more consistent. We have
places where both assert and Q_ASSERT are used next to each other. Also,
distributions like Ubuntu don't strip away assert(), let's hope that
things are a bit different with Q_ASSERT.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: romangg, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23605
Summary:
KWin blits contents into a QImage raster buffer. Because of this we
don't need our underlying GL surface to be double buffered as it
effectively makes the whole thing tripple buffered.
Test Plan: Ran Aurorae, looked the same, should save some memory
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23331
Summary:
Aurorae has a timer between request update and updating the contents.
This makes some sense.
However on initial creation we want to snap the contents immediately as
otherwise we may be out by a frame between a new window being mapped and
the window decoration being rendered.
Test Plan:
Ran with Auroae
Windows opened immediately seemed to have a deco straight away
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23332
Summary:
With f013a4369c, cd6b69a4d2, d960be4b3f and edb200f6bc all possible
backends of a Wayland session have been ported to using the internal functions
of AbstractWaylandOutput's for managing outputs.
This removes the alternative code path used before in these backends, what
simplifies the code and is also a prerequisite to removing the Screens global
in the future.
Reviewers: #kwin, apol, zzag
Reviewed By: #kwin, apol, zzag
Subscribers: apol, kwin
Tags: #kwin
Maniphest Tasks: T11459, T11098
Differential Revision: https://phabricator.kde.org/D23485
Summary:
Get the physical size directly from the always available output device
interface instead of saving an additional copy in the abstract wayland
output class.
There is some ambiguity with orientation and naming that needs to be
cleaned up when output orientation is reworked.
Test Plan: Nested Wayland, Drm, virtual backends tested.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23496
Summary:
Get the pixel size directly from the always available output device
interface instead of saving an additional copy in the backends.
Test Plan: Nested Wayland, Drm, virtual backends tested.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23495
Summary:
Create output devices in virtual backend. For that the setVirtualOutputs call
can only come after the Wayland server has been initiliazied such that the
display exists to create the output and output device interfaces. Tests have
been adjusted for that.
Test Plan:
```
98% tests passed, 3 tests failed out of 148
Total Test time (real) = 362.97 sec
The following tests FAILED:
33 - kwin-testInternalWindow (Failed)
39 - kwin-testPointerInput (Failed)
101 - kwin-testMoveResize (Failed)
```
Failing of these tests looks unrelated to the change.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Maniphest Tasks: T11459
Differential Revision: https://phabricator.kde.org/D23477
Summary:
Since all Wayland session backends now use the same structure of
AbstractWaylandOutput we can create output devices like in the DRM backend.
First let us do this for Wayland nested sessions.
Test Plan: Manually with output-count 1 and 2. Outputs are correctly shown in KScreen.
Reviewers: #kwin
Subscribers: zzag, kwin
Tags: #kwin
Maniphest Tasks: T11140, T11459
Differential Revision: https://phabricator.kde.org/D23473
Summary:
With 1a11abc821 X11 standalone plugin uses the AbstractOutput interface for
managing its outputs. In there the refresh rate is stored in 1/μs.
Test Plan: currentRefreshRate() provides correct rate.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23265
Summary:
There is no point in using quint32 and casting back and forth in numerous places.
Fix a bunch of compiler warnings that we implicitly cast between signed and unsigned.
This makes things consistent with what we get from libinput.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: zzag, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D23086
Summary:
This patch is a first take at splitting up of the Compositor class into
Wayland and X11 child classes.
In this first patch we mostly deal with setup and teardown procedures.
A future goal is to further differentiate the compositing part itself too.
Test Plan: Manually X from VT and Wayland nested. Autotests pass.
Reviewers: #kwin
Subscribers: sbergeron, anthonyfieroni, zzag, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D22195
Summary:
So far we were following a bit unique and rare doxygen comment style:
/**
* Contents of the comment.
**/
Doxygen comments with this style look balanced and neat, but many people
that contribute to KWin don't follow this style. Instead, they prefer
more traditional doxygen comment style, i.e.
/**
* Contents of the comment.
*/
Reviewing such changes has been a bit frustrating for me (so selfish!)
and for other contributors.
This change switches doxygen comment style in KWin to a more traditional
style. The main reason for doing this is to make code review process easier
for new contributors as well us.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22812
Summary:
Currently only SVG-based decoration themes react to border size changes.
QML-based decoration themes on the other hand, for example Plastik, don't
react to such changes, only new windows will have decorations with the
new border size.
BUG: 408035
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22665
Summary:
kwin(28512) QPainter::begin|QPainter::QPainter|KWin::Decoration::Renderer::renderToImage QPainter::begin: Paint device returned engine == 0, type: 3
kwin(28512) QPainter::setRenderHints|QPainter::setRenderHint|KWin::Decoration::Renderer::renderToImage QPainter::setRenderHint: Painter must be active to set rendering hints
kwin(28512) QPainter::setWindow|KWin::Decoration::Renderer::renderToImage|?KWinX11Platform.so? QPainter::setWindow: Painter not active
kwin(28512) QPainter::setClipRect|KWin::Decoration::Renderer::renderToImage|?KWinX11Platform.so? QPainter::setClipRect: Painter not active
Test Plan: seems to happen on startup, at least (when restarting kwin)
Reviewers: graesslin, zzag
Reviewed By: zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9014
Summary:
Currently code base of kwin can be viewed as two pieces. One is very
ancient, and the other one is more modern, which uses new C++ features.
The main problem with the ancient code is that it was written before
C++11 era. So, no override or final keywords, lambdas, etc.
Quite recently, KDE compiler settings were changed to show a warning if
a virtual method has missing override keyword. As you might have already
guessed, this fired back at us because of that ancient code. We had
about 500 new compiler warnings.
A "solution" was proposed to that problem - disable -Wno-suggest-override
and the other similar warning for clang. It's hard to call a solution
because those warnings are disabled not only for the old code, but also
for new. This is not what we want!
The main argument for not actually fixing the problem was that git
history will be screwed as well because of human factor. While good git
history is a very important thing, we should not go crazy about it and
block every change that somehow alters git history. git blame allows to
specify starting revision for a reason.
The other argument (human factor) can be easily solved by using tools
such as clang-tidy. clang-tidy is a clang-based linter for C++. It can
be used for various things, e.g. fixing coding style(e.g. add missing
braces to if statements, readability-braces-around-statements check),
or in our case add missing override keywords.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, apol, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22371
Summary:
Position and most importantly scaling will likely be the same on the next run,
This saves a flicker round at startup when scaling is different of 1 initialising the view at 1 then jumping at whatever the user requested.
Test Plan: Restarted my system several times
Reviewers: #kwin, #plasma, romangg
Reviewed By: #kwin, #plasma, romangg
Subscribers: davidedmundson, zzag, romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22292
Summary: QColor::dark() and QColor::light() are obsolete since long time ago.
Reviewers: #kwin, apol
Reviewed By: apol
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22360
Summary:
QImage::byteCount() was deprecated in Qt 5.10. It is advised to use
QImage::sizeInBytes() method instead.
Reviewers: #kwin, apol
Reviewed By: apol
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22355
Summary:
QRegion::rects was deprecated in Qt 5.11. It is advised to use begin()
and end() methods instead.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22353
Summary:
To streamline Compositor code more remove the composite reset timer. The two
times it was used we can either use a singleshot timer instead or connect the
call to a different signal in the X11 backend.
Long term goal is to have a well structured init of the Compositor such that
we can call directly instead.
Test Plan: Manually in X and Wayland nested session.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Maniphest Tasks: T11071
Differential Revision: https://phabricator.kde.org/D22270
Summary:
Font scaling is based on the screen scale factor so we can just return
dpi of 96.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22219
Summary:
The new class is responsible for parsing EDID blobs. It has pretty
straightforward API: you hand blob data to the constructor and after
that you're ready to query parsed data, e.g. physical size, etc.
The main reason to extract EDID parsing code into a class is to clean up
drm_output.cpp a bit.
Test Plan: Compiles, the DRM platform still works.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22211
Summary:
Depending on whether the underlying platform supports offscreen surfaces,
QOffscreenSurface may create an invisible QWindow. In our case that's the
case, for each offscreen surface a native window is created. This may
lead to some funky results related to window decorations, see bug 407612.
There are several ways to implement offscreen surfaces - either use pbuffers
or utilize a surfaceless context extension. For the sake of simplicity
this change sticks with pbuffers, but it's a good idea to support both
methods.
CCBUG: 407612
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: romangg, alexeymin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D22150
Summary:
The color correction manager doesn't make any specific assumptions about
underlying platform, e.g. whether it's x11, etc. The platform just
has to be capable of setting gamma ramps. Given that, there are no any
significant technical blockers for making this feature work on x.
Reviewers: #kwin, davidedmundson, romangg
Reviewed By: #kwin, davidedmundson, romangg
Subscribers: romangg, neobrain, GB_2, filipf, davidedmundson, ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D21345
Summary:
Represent outputs in the X11 session via AbstractOutput. For that we
move all Wayland specific parts of AbstractOutput into a new subclass
AbstractWaylandOutput and let the outputs of our Wayland backends inherit
from there.
This should allow us to get rid of the Screens class later on.
Test Plan: Manually in X session.
Reviewers: #kwin, zzag, davidedmundson
Reviewed By: #kwin, zzag, davidedmundson
Subscribers: ngraham, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19208
Summary:
To homogenize our backends and as another step to remove the Screens class
use the AbstractOutput class in the windowed X11 backend.
Test Plan: Manually in X session.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: davidedmundson, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19207
Summary:
To homogenize our backends and as another step to remove the Screens class
use the AbstractOutput class in the framebuffer backend.
Test Plan: Manually on VT enforcing the framebuffer backend.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19199
Summary:
So far KWin didn't send axis_source, axis_discrete, and axis_stop. Even
though most of those events are optional, clients need them to work as
expected. For example, one needs axis_source and axis_stop to implement
kinetic scrolling; Xwayland needs axis_discrete to prevent multiple
scroll events when the compositor sends axis deltas greater than 10, etc.
BUG: 404152
FIXED-IN: 5.17.0
Test Plan:
* Content of a webpage in Firefox is moved by one line per each mouse
wheel "click";
* Scrolled gedit using 2 fingers on GNOME Shell, sway, and KDE Plasma;
in all three cases wayland debug looked the same (except diagonal scroll
motions).
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19000
Summary:
Returning a reference to a value on the stack is broken.
This caused kwin_wayland to crash in openQA with a nullptr deref.
BUG: 407199
Test Plan: Only build tested.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D21085
Summary:
Every time a display gets connected/disconnected, every output will be
reinitialized. We don't really need to reset the scaling to 1 every time
we don't know, especially since the setting has been set voluntarily.
Test Plan: When I disconnect the external display, my laptop doesn't fallback to scale=1.
Reviewers: #plasma, apol
Reviewed By: apol
Subscribers: davidedmundson, ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D20521
Summary:
This is the initial implementation of a DRM backend based on the EGLDevice,
EGLOutput, and EGLStream extensions, supporting NVIDIA graphics hardware using
their proprietary driver. The new backend will be used if the environment
variable KWIN_DRM_USE_EGL_STREAMS is set. On initialization, it will attempt to
create an EGLDevice based on the DRM device currently in use and create
EGLOutputs and EGLStreams for any attached displays. These are used to control
presentation of the final composited frame. Additionally, it will register the
wl_eglstream_controller Wayland interface so that native EGL windows created by
clients can be attached to an EGLStream allowing buffer contents to be shared
with the compositor as a GL texture.
At this time there are two known bugs in the NVIDIA driver's EGL implementation
affecting desktop functionality. The first can result in tooltip windows drawn
by plasmashell to contain incorrect contents. The second prevents KWayland from
being able to query the format of EGLStream-backed buffers which interferes
with the blur effect. Fixes for both of these are currently in development and
should appear in an upcoming NVIDIA driver release.
Additionally, hardware cursors are currently not supported with this backend.
Enabling them causes the desktop to intermittently hang for several seconds.
This is also likely a bug in the NVIDIA DRM-KMS implementation but the root
cause is still under investigation.
Test Plan:
On a system with an NVIDIA graphics card running a recent release of their
proprietary driver
* Ensure the nvidia_drm kernel module is loaded with the option "modeset=1"
("# cat /sys/module/nvidia_drm/parameters/modeset" should print "Y")
* Ensure EGL external platform support is installed
https://github.com/NVIDIA/eglexternalplatform
* Ensure KWin was build with the CMake option
KWIN_BUILD_EGL_STREAM_BACKEND=ON (this is the default)
* Start a plasma wayland session with the environment variable
KWIN_DRM_USE_EGL_STREAMS set
* Ensure output from KWin OpenGL initialization indicates the NVIDIA EGL
driver is in use (as opposed to Mesa / llvmpipe).
* Desktop should be fully functional and perform smoothly.
Reviewers: #kwin, romangg, davidedmundson
Reviewed By: #kwin, romangg, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18570
Summary:
Since QPA only performs off-screen rendering, it does not require an EGLConfig
that supports any particular surface type. Currently it requests a config
supporting window surfaces, however the EGLDeviceEXT platform, which is the
basis of the EGLStream back-end used with the proprietary NVIDIA driver, does
not support such surfaces resulting in eglChooseConfig not returning any valid
configs when that back-end is in use. Since QPA doesn't actually create any
window surfaces, it should be fine to remove this restriction to allow it to
initialize properly with the EGLStream back-end.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin, davidedmundson
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D20455
Summary:
Currently there is no any good reason for keeping ScopedDrmPointer;
providing our own deleter for QScopedPointer would make more sense.
Given that we already have type that acts as a scoped pointer for drm
objects we can improve it a bit and make simpler, e.g.
DrmScopedPointer<drmModeConnector> connector;
is much simpler than
ScopedDrmPointer<_drmModeConnector, &drmModeFreeConnector> connector;
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: apol, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19905
Summary:
Otherwise it thinks outputs couldn't be created and it leaves.
Problem is that after this fix it crashes when it actually does things with:
kwin_wayland: /home/apol/devel/frameworks/kwin/composite.cpp:646: void KWin::Compositor::aboutToSwapBuffers(): Assertion `!m_bufferSwapPending' failed.
Test Plan: As said, it proceeds correctly and crashes elsewhere
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19921
Summary:
The NVIDIA implementation of glXSwapBuffers will, by default, queue up
to two frames for presentation before blocking. KWin's compositor,
however, assumes that calls to glXSwapBuffers will always block until
the next vblank when rendering double buffered. This assumption isn't
valid, as glXSwapBuffers is specified as being an implicit glFlush,
not an implicit glFinish, and so it isn't required to block. When this
assumption is violated, KWin's frame timing logic will
break. Specifically, there will be extraneous calls to
setCompositeTimer with a waitTime of 0 after the non-blocking buffer
swaps, dramatically reducing desktop responsiveness. To remedy this,
a call to glXWaitGL was added by Thomas Luebking after glXSwapBuffers
in 2015 (see bug 346275, commit
8bea96d701). That glXWaitGL call is
equivalent to a glFinish call in direct rendering, so it was a good
way to make glXSwapBuffers behave as though it implied a glFinish
call.
However, the NVIDIA driver will by default do a busy wait in glFinish,
for reduced latency. Therefore that change dramatically increased CPU
usage. GL_YIELD can be set to USLEEP (case insensitive) to change
the behavior and use usleep instead. When using the NVIDIA driver,
KWin will disable vsync entirely if GL_YIELD isn't set to USLEEP
(case sensitive, a bug in KWin).
However, the NVIDIA driver supports another environment variable,
__GL_MaxFramesAllowed, which can be used to control how many frames
may be queued by glXSwapBuffers. If this is set to 1 the function
will always block until retrace, in line with KWin's expectations.
This allows the now-unnecessary call to glXWaitGL to be removed along
with the logic to conditionally disable vsync, providing a better
experience on NVIDIA hardware.
Reviewers: #kwin, davidedmundson, zzag
Reviewed By: #kwin, davidedmundson, zzag
Subscribers: kwin, davidedmundson, zzag
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19867
Summary:
This patch rewrites large parts of the Wayland platform plugin, in order to
facilitate the testing of multi output behavior in nested KWin sessions.
For that a new class WaylandOutput is introduced, which is based on
AbstractOutput and by that shares functionality with our virtual and DRM
platform plugins.
The EGL/GBM and QPainter backends have been remodelled after the DRM one,
sharing similiarities there as well now.
Pointer grabbing has been rewritten to support multiple outputs, now using
pointer locking instead of confining and drawing in this case onto a sub-
surface, which get dynamically recreated in between the different output
surfaces while the cursor is being moved.
Window resizing is possible if host supports xdg-shell, but currently the
mode size does not yet fill the new window size.
The number of outputs can be set by command line argument `--output-count`,
scaling is also supported by setting the argument `--scale`.
Further steps could be:
* Enabling automatic fill of resized windows via Wayland mode change
* Multiple diverging initial sizes and scale factors for mulitple outputs
**Watch it in action:** https://youtu.be/FYItn1jvkbI
Test Plan: Tested it in live session.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18465
Summary:
If hardware cursor support is not available when using the drm backend for
Wayland compositing, the software cursor texture will not be updated when the
cursor image changes, and it will still be drawn when no cursor image is set
(such as when running a full-screen game). Furthermore, the drmModeSetCursor
and drmModeMoveCursor functions will still be unnecessarily called when the
cursor is moved or hidden.
To correct this, SceneOpenGL should connect Platform::cursorChanged as opposed
to Cursor::cursorChanged to its texture update function, as only the former
will be emitted when the cursor is updated and the compositor should check if
the cursor is hidden and the software cursor image is not null before rendering
it. DrmBackend::moveCursor and DrmBackend::hideCursor should also return
immediately if using a software cursor.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18376
Summary: Like we do on inverted mode
Test Plan: Not much, because we don't support portrait mode on intel hardware just yet. I can see the cursor properly rotated before drm tells us to fall back to the previous configuration.
Reviewers: #kwin, #plasma, graesslin
Reviewed By: #kwin, #plasma, graesslin
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19710
Summary:
My change in 304528e80b has been reported to
cause issues for PostMarketOS https://gitlab.com/postmarketOS/pmaports/issues/204
I originally submitted the change to activate Framebuffer devices
as secondary framebuffer devices are not on by default, (such as a
secondary DisplayLink device). Changing attributes usually forced
some framebuffer devices to turn on, however I have found a more
accurate way to turn on framebuffer devices, without messing with
the color layout.
Reviewers: #kwin, davidedmundson, graesslin, zzag
Reviewed By: #kwin, zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19663
Summary:
Package structure plugins are not that special so move them to
the corresponding directory.
Test Plan: Compiles.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18685
Summary:
When Compositor finishes compositing, it destroys EffectsHandlerImpl,
which in its turn tries to unload all effects. But there is a problem...
EffectsHandlerImpl has platform-specific hooks to ungrab keyboard and
also stop mouse interception. Given that any call made to a virtual function
in the destructor of a base class(EffectsHandlerImpl) won't go to a derived
class(EffectsHandlerImplX11), keyboard won't be ungrabbed even if effect
that grabbed it is already gone.
BUG: 399572
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19178
Summary:
Deleted has lifetime bounded to effects and scene.
We can't discard Deleted before EffectsHandler is destroyed because
effects that referenced it may call unrefWindow.
On the other hand, the fact that Deleted may outlive scene doesn't
make sense because Deleted exist purely for animation purposes and
nothing more.
This change arranges lifetime of Deleted so it's more reasonable.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: graesslin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18914
Summary:
On Wayland we cannot switch from OpenGL to QPainter compositor as this
would break any running OpenGL application. KWin registers it's
EGLDisplay to Wayland and without OpenGL this doesn't make sense any
more. We are not able to render OpenGL buffers in the QPainter
compositor.
While it's theoretically possible to switch from QPainter to OpenGL it
doesn't make any sense for the same reason. Any running OpenGL
application would be using llvmpipe and could not be switched to proper
OpenGL.
This change stores the selected compositing type in Platform and the
implementations can use it to restrict the supported compositors. On X11
we don't need this, all other Platforms implement the restriction. Thus
it's no longer possible to switch the backends at runtime.
Test Plan:
Adjusted tests run, no runtime test as gui doesn't support
switching to QPainter anyway.
Reviewers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19084
Summary:
Using the Wayland protocol for OpenGL is no longer used or useful. KWin
internal windows only use OpenGL through QtQuick. We either have the
sharing context (KWin uses OpenGL for compositing) or we have the
QPainter compositor which also turns QtQuick to use software renderer.
Thus a situation where the Wayland platform context is useful doesn't
exist any more. Removing it helps getting the QPA plugin Wayland free.
Test Plan:
Run nested KWin triggering Outline once with OpenGL and once
with QPainter compositor.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19012
Summary:
Despite plasma frameworks doing it's own scaling with fonts, it's been
requested to use kwin/wayland scaling.
Like DRM, when kscreen is not used, scale value is loaded from a config
file.
Config format is
[HWComposerOutputs][0]
Scale=N
The 0 is to map similarly to DRM and support multi-screen, but with a
screen index
rather than a UUID based on EDID.
Because we don't support multi screen this is always 0 for now.
Test Plan: Ran with the config value unset and with the config value at
Scale=3.
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: bshah, romangg, nicolasfella, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18810
Summary:
The virtual platform did not actually present content and spin the
compositor. Let's do this from now on , first for the EGL GBM backend.
Test Plan: All tests pass according to Vlad
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: graesslin, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18436
Summary:
This gives us XdgOutput support a requirement now that wayland server
reports that we support it and Qt5.12 then expects it to be sent.
It also provides an easy starting point for supporting wayland scaling
and a slight step towards multi-output.
Test Plan:
Ran on phone. Got output. Turning screen on and off works.
The double tap doesn't work great, but that was true before
(via bshah's hack to build on the current state)
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: romangg, nicolasfella, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18808
Summary: Required for kwin_wayland to find it's own plugin.
Test Plan: My kwin_wayland was crashing and gdb showed wrong plugin being loaded
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D19010
Summary:
We have a mix of different doxygen comment styles, e.g.
/*!
Foo bar.
*/
/**
* Foo bar.
*/
/** Foo bar.
*/
/**
* Foo bar.
*/
/**
* Foo bar.
**/
To make the code more consistent, this change updates the style of all
doxygen comments to the last one.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18683
Summary:
Lanczos filter shouldn't be in KWin core because it's quite specific about
rendering backend.
Test Plan: Windows in the desktop grid look normal.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: mart, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18774
Summary:
KWindowSystem provides a plugin interface to have platform specific
implementations. So far KWin relied on the implementation in
KWayland-integration repository.
This is something I find unsuited, for the following reasons:
* any test in KWin for functionality set through the plugin would fail
* it's not clear what's going on where
* in worst case some code could deadlock
* KWin shouldn't use KWindowSystem and only a small subset is allowed
to be used
The last point needs some further explanation. KWin internally does not
and cannot use KWindowSystem. KWindowSystem (especially KWindowInfo) is
exposing information which KWin sets. It's more than weird if KWin asks
KWindowSystem for the state of a window it set itself. On X11 it's just
slow, on Wayland it can result in roundtrips to KWin itself which is
dangerous.
But due to using Plasma components we have a few areas where we use
KWindowSystem. E.g. a Plasma::Dialog sets a window type, the slide in
direction, blur and background contrast. This we want to support and
need to support. Other API elements we do not want, like for examples
the available windows. KWin internal windows either have direct access
to KWin or a scripting interface exposed providing (limited) access -
there is just no need to have this in KWindowSystem.
To make it more clear what KWin supports as API of KWindowSystem for
internal windows this change implements a stripped down version of the
kwayland-integration plugin. The main difference is that it does not use
KWayland at all, but a QWindow internal side channel.
To support this EffectWindow provides an accessor for internalWindow and
the three already mentioned effects are adjusted to read from the
internal QWindow and it's dynamic properties.
This change is a first step for a further refactoring. I plan to split
the internal window out of ShellClient into a dedicated class. I think
there are nowadays too many special cases. If it moves out there is the
question whether we really want to use Wayland for the internal windows
or whether this is just historic ballast (after all we used to use
qwayland for that in the beginning).
As the change could introduce regressions I'm targetting 5.16.
Test Plan:
new test case for window type, manual testing using Alt+Tab
for the effects integration. Sliding popups, blur and contrast worked fine.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18228
Summary:
Mesa requires XESetWireToEvent xlib callbacks to be called
when DRI2 is used. This is done by the GLX integration in
the Qt's xcb plugin, but Qt 5.12 initializes the GLX integration
only when required, e.g. when a window with OpenGL support is
created or when availability of OpenGL is checked.
So force initialization of the GLX integration by calling
QOpenGLContext::supportsThreadedOpenGL().
https://codereview.qt-project.org/#/c/6557/https://bugzilla.opensuse.org/show_bug.cgi?id=1120090
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: davidedmundson, graesslin, fvogt, filipf, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18366
Summary:
Currently, when the lanczos filter attempts to release acquired resources,
the backend is already gone. To fix that we have to destroy the filter
together with SceneOpenGL2. At that moment the backend is still alive.
BUG: 403370
FIXED-IN: 5.15.0
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18367
Summary:
So far we didn't try to do high DPI on kwin internal windows, such as
the user context menu and tab bars and whatever.
Due to wayland scaling they were the correct phyiscal size but upscaled.
This patch fixes our QPA to enable Qt's high-dpi support.
BUG: 402853
Note icons are still low res. This is because the global
QGuiApplication::devicePixelRatio which is the max of all connected
screens is static for the duration of the app. QIcon uses this when
determining the DPR to use. This will require a Qt change.
Test Plan:
Ran at 2x on my normal DPI screen (as that's easier to see anything)
* User action menu is high DPI
* Window deco tooltips are still fine
* Tab switcher is high DPI
* Overlay in present windows Desktop grid are still ok
Reviewers: #kwin
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18042
Summary:
Instead we depend on the surfaceless platform for which we recently
added support. Thus the plugin does not need to use gbm and udev
anymore. So simplifies a lot.
Test Plan: ctest (prior to breaking change) passes
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18160
Summary:
Even though the buffer is passed through a side channel some properties
we might use are double-buffered on the surface commit.
Test Plan: Used by unit test InternalWindowTest::testScale in linked commit
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18085
Summary: For unit test purposes
Test Plan: Used by unit test InternalWindowTest::testScale in linked commit
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D18086
Summary:
Thus we don't require vgem any more which fails with latest mesa.
Kepping the vgem variant as fallback for older systems. See T10245
Test Plan:
SceneOpenGL Test passes without init vgem, not tested with
latest mesa
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D17980
Summary:
This ensures that KWin gets the same keyboard layout config as is
configured in the session and not a default config.
BUG: 402764
FIXED-IN: 5.14.5
Test Plan:
Xephyr to verify the config is applied, otherwise completely
untested. I don't have an X session.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D17967
Summary:
This change inits XInput extension, listens for touch events and
forwards them to our platform API. Thus touch events are forwarded on a
nested wayland session on X11.
Please note that I only tested this change on Xwayland.
Test Plan: Run nested kwin_wayland with two outputs and looked into debug console
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D17369
Summary:
This is a preparation step to move this to ECM (or possibly CMake),
which makes sense now that qtbase is using this too (for Qt6).
Reviewers: #build_system, cgiboudeaux
Reviewed By: cgiboudeaux
Subscribers: cgiboudeaux, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D17547
Summary:
This brings KWin a step closer to be run from build dir without having
to install at all. The integration tests are adjusted so that the
virtual platform is still found which makes the code be closer to what
is used in normal kwin_wayland.
Test Plan: ctest passes, manually verified correct plugin is loaded
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D17388
Summary:
When suspending compositing, SceneOpenGLShadow cannot cleanup cached
decoration shadow textures because the effects handler is already gone.
This sometimes can result in a crash when running kwin_x11 --replace
(we're hitting an assert statement).
To fix that, let's use the scene instead of the effects handler for
making the OpenGL context current.
Test Plan:
No longer hit the assert statement:
ASSERT: "m_cache.isEmpty()" in file /home/vlad/Workspace/KDE/src/kde/workspace/kwin/plugins/scenes/opengl/scene_opengl.cpp, line 2025
Application::crashHandler() called with signal 6; recent crashes: 1
QCoreApplication::applicationFilePath: Please instantiate the QApplication object first
KCrash: crashing... crashRecursionCounter = 2
KCrash: Application Name = kwin_x11 path = /home/vlad/Workspace/KDE/usr/bin pid = 5407
KCrash: Arguments: /home/vlad/Workspace/KDE/usr/bin/kwin_x11 --replace
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D17306
Summary:
The idea of opening the compositing kcm was to show a warning. But that
broke quite some time ago without noticing. We had two ways:
* pass through --args command line argument
* use dbus call to already open kcm
Neither of the two ways is working. The kwincompositing doesn't parse
the arguments and the dbus interface doesn't exist any more.
Following the advice to remove functionality nobody noticed that it is
broken, this is removed with this change. This probably broke with
introducing the new KCM which happened IIRC for Plasma 5.0.
BUG: 393845
FIXED-IN: 5.14.0
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13235
Summary:
The current refresh rate is stored in OutputInterface. Move the getter
therefore in the AbstractOutput class.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16793
Summary: Removes unneeded includes and reorders the code in a sensible way.
Reviewers: #kwin
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16792
Summary:
Set the mode in AbstractOutput and call into the plugin
for final change on hardware.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Maniphest Tasks: T10016
Differential Revision: https://phabricator.kde.org/D16786
Summary:
Wayland output is on protocol level and not dependent on the hardware
platform. Next steps are to do the same for output device and then let
the virtual output call into these initializing functions as well.
Test Plan: Manually and auto test.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16783
Summary: Ensures that we can load the plugin when running only from build dir.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16762
Summary:
Look there, another plugin I didn't remember. The other qml files are
not needed for the aurorae autotest as it's for the svg based themes
instead of qml themes like Plastik.
Test Plan: Further destroyed my system, test failed, with this change passed.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16761
Summary:
So far we didn't know why plastik wasn't loaded. Now we get the error
messages.
Test Plan: Saw error messages while investigating failing KWin test
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16753
Summary: The tests running Aurorae need to be able to pick up the plastik plugin.
Test Plan: Removed system install of plastik plugin, now test passes
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16752
Summary:
This ensures that DontCrashAuroraeDestroyDecoTest can load the plastik
window decoration when run from build directory as it happens on
build.kde.org.
Test Plan: Test passes now when manipulating XDG_DATA_DIRS to hide system install
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16745
Summary:
Ideally KWin would not depend on private headers... but at least we can
remove unused ones.
Test Plan: still builds, I don't see anything requiring the header.
Reviewers: zzag
Reviewed By: zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16655
Summary: This file was required for Qt 5.8. We require 5.11 as minimum version.
Test Plan: Grepped for the file being used in other cmake code, rebuilt KWin without it.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: kwin, zzag
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16654
Summary:
Qt does not like having no screens. Both Qt XCB and Wayland QPAs have
systems pretend there's always at least 1 screen
present.
Kwin already uses a dummy screen on startup, this patch reinserts the
dummy screen if the platform states that all real screens are removed.
BUG: 399564
Test Plan:
Logged in, everything still worked
Did not reproduce the original bug
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16096
Summary:
QOpenGLContext was changed to call platform->makeCurrent before it
called setCurrentContext.
Because we bind window FBO and ultimately that calls
QOpenGlContext::format we need Qt to know which context is current so it
can tell us the format.
This matches the QtWayland EGL code.
BUG: 399392
Test Plan:
Switched virtual desktop with the OSD (previously reliably crashed)
Now it doesn't
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15957
Summary:
If the corner shadow tiles(top-left, top-right, and so on) tiles are missing,
then the left/top/right/bottom shadow tiles will overlap.
This diff addresses that problem by changing how the shadow texture
atlas is rendered:
* corner tiles will be drawn in the corners of the atlas(buildQuads
method expects them to be at the corners);
* top, right, bottom, and left tile will be aligned to the top-left
corner of the inner shadow rect.
For majority of desktop themes, the shadow texture atlas looks the same.
For example, here's for Aether:
Before:
{F6190484, layout=center, size=full}
After:
{F6190488, layout=center, size=full}
Depends on D14783
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, abetts, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14784
Summary:
Current implementation of buildQuads assumes that corner shadow tiles
are always present:
const QRectF leftRect(
topLeftRect.bottomLeft(),
bottomLeftRect.topRight());
but that assumption is wrong. For example, if the default panel is on
the bottom screen edge, then the calendar popup won't have the
bottom-left shadow tile(at least on Wayland). Which means that the left
shadow tile won't be visible because
topLeftRect.left() == bottomLeftRect.right().
Corner rectangles only have to influence height of the left/right tile
and width of the top/bottom tile. Width of the left/right tile and
height of the top/bottom tile should not be controlled by corner tiles.
Overall, this is how shadow quads are computed:
* Compute the outer rectangle;
* Compute target rectangle for each corner tile. If some corner tile is
missing, move the target rectangle to the corresponding corner of the
inner shadow rect and set its width and height to 0. We need to do
that to prevent top/right/bottom/left tiles from spanning over
corners:
{F6190219, layout=center, size=full}
We would rather prefer something like this if the top-left tile is
missing:
{F6190233, layout=center, size=full}
* Fix overlaps between corner tiles;
* Compute target rectangles for top, right, bottom, and left tiles;
* Fix overlaps between left/right and top/bottom shadow tiles.
Test Plan:
* Ran tests;
* Resized Konsole to its minimimum size(on X11 and Wayland);
* Opened the calendar popup(on X11 and Wayland):
Before:
{F6190344, layout=center, size=full}
After:
{F6190346, layout=center, size=full}
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: abetts, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14783
Summary: At least one test requires the physical size to be set.
Test Plan:
Lock screen screen edges test is passing again. Without the change the corner
offset in the ScreenEdges class is not calculated correctly via the
physicalDpiX() and physicalDpiY() values of an auxilliary QWidget.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15183
Summary:
With the new Output class we can set the gamma directly here. This is also
a stepping stone to adjust individual output gamma adjustment later on.
This means any future backend, which aims to support the color correction
frontend needs to use the Output class.
Test Plan: Night Color test still passes.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11803
Summary:
Let VirtualOutput be a child class of the new generic class Output.
This allows code sharing and a very similar behavior of the Virtual backend
in comparision to the Drm backend.
Test Plan:
Autotests succesful with two exceptions: The decoration input test fails on
testDoubleTap, row topLeft. This is to be expected because now the
ScreenEdgeInputFilter captures the event at position (0,0) before the
DecorationEventFilter can capture it. The autotest was adapted to take this
special case into account.
Also the lockscreen test fails, because the virtual output is currently missing
the physical size yet.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11789
Summary:
Lift high-level properties into new Screens child class for platform plugins
using the Output class.
Directly make DrmScreens a child class of OutputScreens.
Test Plan: Manually and auto tests with 94%.
Reviewers: #kwin
Differential Revision: https://phabricator.kde.org/D11782
Summary:
In order to separate high-level properties of individual outputs from
hardware-specific ones and access these, introduce a new generic class Output.
Also make the DrmOutput class directly a child class of this generic class.
The long-term goal is to get rid of the Screens global object on Wayland and
instead directly work with Output objects on compositing level.
This should enable us long-term to do direct scanout to hardware planes, what
I predict needs this generic output representation at one point.
Test Plan: Manually.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11781
Summary:
Weston does something similar
https://cgit.freedesktop.org/wayland/weston/tree/libweston/compositor-fbdev.c#n315
...and it seems that the non-primary framebuffer devices start completely off. (the screen is off on my Displayport device, and the window for the second vga card in qemu is much smaller than the primary one, and all black for my qemu vm) .
In my testing, sending the ioctl FBIOPUT_VSCREENINFO with a *changed* &varinfo allows it to wake up, and turns on the screen.
doing FBIOGET_VSCREENINFO and then FBIOPUT_VSCREENINFO in my testing does not work.
I think really the values that end up getting changed are varinfo.transp.offset and varinfo.transp.length. at least on the qemu system, but in this patch I am aligning all of them for completeness, because the drivers might do it differently for qemu
Test Plan: This causes the window for /dev/fb1 (remote-viewer, and a qemu vm with two "VGA" (bochsdrm) cards) to resize from the smaller size when specifying it as the --fb-device on seat0, and kwin draws on the device.
Reviewers: #kwin, davidedmundson, graesslin
Reviewed By: #kwin, graesslin
Subscribers: zzag, davidedmundson, rkflx, graesslin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9572
Summary:
The kwin code was written to treat scale as non integers, we just need
to switch to the relevant float version of methods.
Test Plan:
Used kscreen-doctor to change this
Konsole resized as appropriate
Plasmashell was all broken, but that's expected until QScreen::size is based on the
xdg-output virtual size
Reviewers: #kwin, mart, graesslin, romangg
Reviewed By: #kwin, mart, graesslin
Subscribers: romangg, zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13616
Summary:
To do so leaves a dangling pointer on our pageFlipHandler
BUG: 396272
Test Plan: Wobbled a window whilst plugging a monitor in and out
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14210
Summary:
We pass the buffer scale of the cursor through QImage::devicePixelRatio.
When copying the cursor with QPainter use Qt's in-built functionality to
handle resizing the cursor pixmap as necessary to match the screen.
As we're now resizing the cursor, the hotspot needs translating from
logical to device co-ordinates.
Test Plan: Used with associated patches
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13605
Test Plan:
Ran kwin_wayland --windowed --scale2
Hovered over deco. Got massive and detailed cursor
Hovered over a wayland client (Qt 5.11 not dev)
Got a massive, but slightly blocky cursor
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13642
Summary:
Workaround QtBug-68997
Deleting of a RenderControl/render controlled window triggers deletion
of other queued deleted items, putting KWin in a corrupt state. See Qt
bug report.
Deleting this queued means we know we don't have anything else going on
in the stack which should make this somewhat safe.
BUG: 395346
Test Plan:
Couldn't reproduce original crash. Based purely on the incomplete backtrace and code reading
Set an Aurorae theme. Closed some windows. Things still worked as before
Reviewers: #kwin, #plasma, mart
Reviewed By: #kwin, #plasma, mart
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13614
Summary:
Instead of seeing the cursor <--> on the left edge you now see an icon
that looks like |<- .
This brings kwin decorations in line with GTK CSD icons.
In theory this is also useful to tell which window will resize in the
case of side-by-side windows (regardless of whether borders are on or
not). In practice with the adwaita icon theme I tested with it's not
very intuitive to realise which is which till you learn the icon.
Change is more involved than it should be as Qt::CursorShape doesn't
have these entries, and I don't want to shadow that enum internally or
have
to change kwin effect code.
Specifics depend on cursor icon theme if they are not present it will
fallback to the <--> icon. (Breeze does not have them currently)
Test Plan:
Resized some windows (on X and on Wayland)
Correct icon appeared on Adwaita
Existing icon appeared on Breeze
Reviewers: #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13396
Summary:
QPainter doesn't render decoration shadows. It renders only
shadows provided through ShadowInterface.
With this change, painting of shadows is done in similar way OpenGL backend is
currently doing.
Before
{F5734867, layout=center, size=full}
After
{F5734870, layout=center, size=full}
Depends on D10811 (dummy decoration with shadows in autotests)
Test Plan:
* start kwin with QPainter backend enabled:
```
KWIN_COMPOSE=Q kwin_wayland --xwayland --windowed
```
* open konsole and kate:
```
DISPLAY=:1 konsole
DISPLAY=:1 kate
```
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: davidedmundson
Subscribers: abetts, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10943
Summary:
This problem appears if shadow corner tiles are too big and
some window has size smaller than 2 * shadowTileSize.
This change tries to address the problem above by exclusing
overlapping tile parts. If there are any two overlapping corners
then tile between them(top/right/bottom/left) is not rendered.
Also, because some corner tile parts can be excluded, corner tiles
are expected to be symmetrical(i.e. if we remove right half from
the top-left tile and left half from the top-right tile and
stick them together, they still look fine, there are no misalignments, etc).
Most shadows(e.g. shadows from Breeze) have such behaviour.
No tiles are overlapping
{F5728514, layout=center, size=full}
Overlapping tiles
{F5728516, layout=center, size=full}
And this is how it supposed to be
{F5728517, layout=center, size=full}
Test Plan:
* apply D11069 to Breeze
* in System Settings/Application Style/Window Decorations, choose "Very Large" shadow size
* open Konsole
* resize it to a minimum possible size
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, ngraham, anemeth, abetts, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10811
Summary:
The drm platform has a special handling for touch events while the
screen is in dpms. All touch events are filtered out, but a double
tap wakes up the screen.
Due to the filtering out of the events the idle timers were not reset.
So if you only double tapped, the screen turned on, but not off again.
This change updates the timestamp after double tap, so that the idle
timers are restarted. All other events are still filtered out, to not
have "fake" events (e.g. smart phone in pocket) wake up the device.
BUG: 392754
FIXED-IN: 5.12.6
Test Plan: only compile tested
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12668
Summary:
Changing the creation of the nested window from unstable v5 to v6 in
order to be supported on more compositors and to use KWin's better
supported platform.
Targeting 5.12 as this will help to remove support for unstable v5
from KWayland.
Test Plan: Run a nested KWin/Wayland on KWin/Wayland, everything looked fine
Reviewers: #kwin, #plasma
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11806
Test Plan:
Very minimal expansion of unit tests which uses WaylandScreens
Wrote mini app to debug actual output of xdg-output for testing the DRM code
Main relevant user of this is xwayland > 1.20 which I don't have, so that
part remains untested
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: romangg, graesslin, bshah, kwin
Tags: #kwin
Maniphest Tasks: T8501
Differential Revision: https://phabricator.kde.org/D12243
Summary: TTYs are only available for seat0, so when starting a framebuffer kwin on seat1, it never draws, because drawing is always suspended, because it is being treated as not active
Test Plan: The framebuffer backend draws on seat1, and /dev/fb1 and when I switch back to my Weston greeter, (when it's also using the frame buffer,) it doesn't try to draw on top of it.
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: davidedmundson, rkflx, graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9574
Summary: The warning that the format is unknown was being logged unconditionally
Reviewers: #kwin, bshah
Reviewed By: #kwin, bshah
Subscribers: rkflx, graesslin, cfeck, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9567
Summary:
Qt objects are treated as identities so remove the copy constructor and
an assignment operator. See, http://doc.qt.io/qt-5/object.html#identity-vs-value
IIRC some Qt objects(like QImage) have copy constructor for implicit data sharing,
but VirtualOutput doesn't have anything to share.
Also, it [this patch] fixes a compiler warning:
```
/home/vlad/KDE/src/kde/workspace/kwin/plugins/platforms/virtual/virtual_output.cpp: In copy constructor ‘KWin::VirtualOutput::VirtualOutput(const KWin::VirtualOutput&)’:
/home/vlad/KDE/src/kde/workspace/kwin/plugins/platforms/virtual/virtual_output.cpp:30:1: warning: base class ‘class QObject’ should be explicitly initialized in the copy constructor [-Wextra]
VirtualOutput::VirtualOutput(const VirtualOutput &o)
^~~~~~~~~~~~~
```
Reviewers: #kwin, romangg
Reviewed By: #kwin, romangg
Subscribers: michaelh, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12214
Do not blindly select first EGL config from returned list, but choose the one that matches GBM surfaces, that will be created later.
GBM surfaces are created with GBM_FORMAT_XRGB8888 format, so choose the config that matches it.
With wrong format EglGbmBackend::resetOutput() will later fail with error EGL_BAD_MATCH.
Test Plan: Compile, run startplasmacompositor. Verify that OpenGL compositing is used, either by kwin debug console, or by kwin support information.
Reviewers: graesslin, davidedmundson, #kwin, #plasma_on_wayland, bshah
Reviewed By: davidedmundson
Subscribers: zzag, kwin, #kwin
Tags: #kwin, #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D11758
Summary:
Do not blindly select first EGL config from returned list, but choose the one that matches GBM surfaces, that will be created later.
GBM surfaces are created with GBM_FORMAT_XRGB8888 format, so choose the config that matches it.
With wrong format EglGbmBackend::resetOutput() will later fail with error EGL_BAD_MATCH.
Test Plan: Compile, run startplasmacompositor. Verify that OpenGL compositing is used, either by kwin debug console, or by kwin support information.
Reviewers: graesslin, davidedmundson, #kwin, #plasma_on_wayland, bshah
Reviewed By: davidedmundson
Subscribers: zzag, kwin, #kwin
Tags: #kwin, #plasma_on_wayland
Differential Revision: https://phabricator.kde.org/D11758
Summary:
This patch implements using EGL_IMG_context_priority to request
high-priority rendering contexts if the extension is available.
EGL_IMG_context_priority is currently used in this fashion by
e.g. Android's SurfaceFlinger (RenderEngine.cpp) and libweston
(gl-renderer.c) and seems promising given this widespread
acceptance.
Reviewers: #kwin, graesslin, romangg, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11572
Summary:
Implements a KWayland protocol to pass GBM fd from KWin to KRfb and
addictions to relevant projects from both sides.
Note that this patch does not affect default behaviour of mentioned projects. It can be used
only with KWIN_REMOTE=1 in env from KWin side and with preferredFrameBufferPlugin=gbm in krfbrc from
KRfb side. In all other aspects app behaviour remains unchanged.
Test Plan: Launched KWin in Wayland mode, launched KRfb in it, launched KRDC on a laptop, connected in read-only mode, observed a correctly retrieved desktop with Krfb window
Reviewers: graesslin, davidedmundson, romangg, #kwin
Reviewed By: davidedmundson, romangg, #kwin
Subscribers: kossebau, jgrulich, romangg, ngraham, alexeymin, aacid, kwin, #kwin, davidedmundson, plasma-devel
Tags: #plasma_on_wayland, #kwin
Maniphest Tasks: T5653, T7785
Differential Revision: https://phabricator.kde.org/D1230
Summary:
Since VirtualOutput is a QObject, store it per reference and not per value.
Also fix some compilation warnings.
Test Plan: Before and after 92% tests passed.
Reviewers: #kwin, davidedmundson
Reviewed By: davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11581
Summary:
This matches the DRM backend more closely and allows mid-test removal and
addition of virtual outputs with different properties in the future.
Test Plan: Before and after 93% tests passed.
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11351
Summary:
some drivers, like Mali have EGL_KHR_platform_gbm
but not EGL_MESA_platform_gbm
Test Plan: pending a test on rock64 board
Reviewers: #kwin, #plasma, davidedmundson, graesslin
Reviewed By: #kwin, #plasma, graesslin
Subscribers: graesslin, garg, davidedmundson, plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10346
Summary:
The support for interactive point selection was missing. This results in
the ColorPicker dbus API always returning an error on X11. We either need
to disable the ColorPicker on X11 or add support for this functionality.
As the X11 platform basically supports selecting a point in the
interactive window selection it makes more sense to add this missing
method in the platform than to disable support of color picker effect.
BUG: 387720
FIXED-IN: 5.12.1
Test Plan:
Run KWin/X11 on Xephyr and was able to pick a color and
kill a window
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10302
Summary:
The main reason for not having it as a mandatory dependency was that BSD
doesn't support it. But as I learned recently it is available on our CI
system. So BSDs have support now.
Even more it showed that the code doesn't compile if the dependency is
missing. And there's one thing I hate: broken build configuration
options.
So let's make UDEV and libinput a required dependency and get rid of the
problems.
Test Plan: Compiles
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10057
Summary:
While investigating BUG 387313 I noticed that blending might be disabled
for subsurfaces. Blending was disabled before rendering the subsurfaces
and it is not checked whether the surfaces have an alpha channel or not.
This change addresses this problem by disabling blending after all
subsurfaces have been rendered and enabling blending if a subsurface has
an alpha channel.
Unfortunately this does not fix the investigated bug.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D10060
Summary:
x and y are always relative to the parent, adding parent.width to
calculate the position doesn't make sense.
Original author meant just "x: parent.width-1"
But we may as well just use anchors. Programatically it comes out the
same.
Test Plan:
No more weird vertical lines in the KCM when view is slightly less than 2 previews wide.
Modded colour to hardcoded "red" for easier visualisation, checked it looked ok when set as a real deco.
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9776
Summary:
This change finds the screen for a touch screen device based on:
* number available screens
* output name defined on the touch screen device
* internal screen
* and physical size
The id of the screen is stored in the Device allowing to adjust the
touch points accordingly. This means instead of transferring to the
combined display size the touch points are transferred into the output
space and the position of the output is added. Thus in a multi screen
system the touch points are properly mapped to the output.
Furthermore the screen orientation is passed to the Device and a
calibration matrix is set accordingly. Thus a transformed screen has the
touch screen transformed accordingly.
Please note that this only affects libinput on Wayland and not on X11!
The x11 standalone platform needs to gain similar code.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8748
With Wayland KWin needs to provide certain services, which were provided
before that by the Xserver. One of these is gamma correction, which includes
the - by many people beloved - functionality to reduce the blue light at
nighttime. This patch provides the KWin part of that. It is self contained,
but in the end will work in tandem with a lib in Plasma Workspace and a KCM
in Plasma Desktop, which can be used to configure Night Color.
* Three modi:
** Automatic: The location and sun timings are determined automatically
(location data updates will be provided by the workspace)
** Location: The sun timings are determined by fixed location data
** Timings: The sun timings are set manually by the user
* Color temperature value changes are smoothly applied:
** Configuration changes, which lead to other current values are changed
in a quick way over a few seconds
** Changes on sunrise and sunset are applied slowly over the course of few
minutes till several hours depending on the configuration
* The current color value is set immediately at startup or after suspend
phases and VT switches. There is no flickering.
* All configuration is done via a DBus interface, changed values are tested
on correctness and applied atomically
* Self contained mechanism, speaks directly to the hardware by setting the
gamma ramps on the CRTC
* Currently working on DRM backend, extensible to other platform backends in
the future
* The code is written in a way to make the classes later easily extendable to
also provide normal color correction, as it's currently done by KGamma on X
Test Plan:
Manually with the workspace parts and added integration tests in KWin using
the virtual backend.
BUG:371494
Reviewers: #kwin, graesslin
Subscribers: kwin, plasma-devel, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D5928
Summary:
KWin was quite good in ensuring that you don't need to install by
passing paths to the tests. The new way is much nicer, so code is
adjusted for the new way. Also if we require a newer ECM in future we
need to support the new way.
No guarantee that the tests don't pick something up from the system env,
that needs more testing.
References: https://community.kde.org/Guidelines_and_HOWTOs/Making_apps_run_uninstalled
Test Plan: The tests which loaded helpers pass
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7543
Summary:
The addition of the test infrastructure is motivated by the regressions
caused by adding mode switching and transformation support.
A contributing factor to these regression is the fact that the DRM
platform does not have any tests. It is difficult to test this code as
it needs to work with hardware, thus we cannot use the real DRM library.
Instead we need to use mocking.
This change sets up some first basic tests with the help of a mockDrm
library. In order to better test the code as units the Drm classes are
slightly refactored. Most importantly the dependency to DrmBackend is
removed wherever possible and replaced by a simple int fd which is mostly
the only element used by the classes.
This first test introduces basic testing of a DrmObject. It is intended
to extend this to at least also test DrmPlane as a central piece of our
Drm platform plugin. This will also extend the tests of DrmObject.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8776
Summary:
We need to keep the DrmOutput object to still have the
WaylandOutputDevice.
Screens currently start off enabled as before.
In order to keep KWin to have a correct index based list of screens we
need to store a second vector of currently enabled outputs for the
screens interface.
Test Plan:
Had dual screens.
Disabled/Enabled each one through the kscreen KCM
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: ngraham, luebking, broulik, graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8796
Mesa's glXChooseFBConfig will not return any sRGB capable fbconfig when it
is not explicitly asked for. On some systems, the only ARGB32 visual is
paired with an sRGB capable fbconfig, so application windows using ARGB32
visuals would fail to display.
BUG: 387159
FIXED-IN: 5.11.4
Summary:
This is a tiny refactor so that DrmOutput can have WaylandOutput
dynamically
deleted and recreated at runtime as we disable outptuts.
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8794
Summary:
con->setOutput and crtc->setOutput is called in Output::~Output so this
is doing it twice redundantly.
More importantly Output::~Output calls crtc->blank(), which means we
need a valid CRTC object there.
Test Plan: Compiles
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: bshah, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8779
Summary:
The AMS code accesses elements in a vector which might not be valid. This
change refactors the code to be more robust, especially the DrmPlane,
which started to crash after adding transformation support.
BUG: 386490
Reviewers: #kwin, #plasma, fvogt, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8752
Summary:
This change introduces an OrientationSensor class which wraps a
QOrientationSensor. The OrientationSensor is hold by Screens and gets
enabled if Screens knows about an internal (e.g. LVDS) display which
supports rotation. In addition the OrientationSensor holds an KSni to
enable/disable the automatic rotation support.
The drm platform plugin is adjusted to make use of the OrientationSensor.
The API is defined in a way that this can also be implemented on other
platforms supporting rotation. Most important are hwcomposer and X11
standalone. The latter should be straight forward as rotation is provided
through XRandR. The former needs addition for rotation support first.
Test Plan: Rotated my Yoga 12
Reviewers: #kwin, #plasma, sebas
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8699
Summary:
The idea behind getting the supported transformations is to tell KScreen
which transformations are actually supported and thus not even allow the
user select a setting which is not supported.
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8645
Summary:
While KWin gained support for changing modes it did not yet forward it
to the Wayland OutputInterface. This change implements this missing todo
by finding the matching mode and marking it as current.
Test Plan: Run kinfocenter to verify the current mode is properly set.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8578
Summary: Mostly so DRM can report if it has AMS or not
Test Plan:
Ran on my DRM setup, printed debug.
Spawned nested compositor, printed debug on that
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8702
Summary:
This change fixes the hotspot calculation by introducing a dedicated
matrix to map the hotspot.
To better test the hotspot a small test application is added. The app
renders a red point at the cursor position and uses a cross for cursor
with the hotspot position being transparent. So if KWin renders the
cursor at the correct position a red point is visible in the center of
the cross. The test app supports several cursor hotspot positions:
* center (default)
* top left
* top right
* bottom right
* bottom left
To switch between the variants press the space key.
Test Plan:
Rotated screen, used test app to verify the hotspot is
correct. Also scaled display, still correct
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8668
Summary:
So far all outputs shared the same dumb buffer for the cursor image.
This doesn't work any more when screen rotation is enabled. For rotated
screens the cursor image per output is different. On some it might be
rotated, on some not.
To solve this problem the dumb buffers are moved from the DrmBackend to
the DrmOutput. The DrmOutput now creates the cursor images itself and
can rotate them if needed. Thus we get nicely transformed cursors.
Test Plan: Rotated screens, moved cursor around, image properly rotated
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8664
Summary:
This is meant to address Bug 372114. The problem here is that the KConfig
object (and its derivatives), that the freeze detection thread needs to
record the freeze, are not thread safe. When it happens that the main
thread is in fact not frozen, it is possible that the two stomp on each
other's KConfig object.
The solution applied here is to use the KSharedConfig::openConfig
function, which is thread safe, on the freeze detection thread. As was
mentioned by Martin Flöser in the discussion, the thread needs to obey
the name of the main config file of KWin, which can change in the future.
As a secondary issue, this patch also turns off KCrash reporting for
aborts due to a freeze being detected. IMO it is not very user friendly
to still show a crash report to the user, even after this bug is fixed,
for the deliberate SIGABRT. Maybe a less intrusive notification could be
used to tell the user why effects are suddenly disabled?
I've been using kwin with this change for several weeks now and it makes
the restarts of kwin due to freezes unobtrusive. However, most (I would
say almost all) of these freezes are actually instances where the system
is being slow after eg. screen resolution is changed.
BUG: 372114
FIXED-IN: 5.11.3
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: ngraham, graesslin, anthonyfieroni, cfeck, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8356
Summary:
This change refactors the way how the cursor position on a screen is
calculated. It is changed to a matrix multiplication with the
adjustments for the rotated screen just being additional steps added to
the matrix.
With this calculation I got correct positions for all variants of
scaled, rotated and differently positioned outputs.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8627
Summary:
When KWin successfully presents a new mode, it stores the current state
as the last working mode. If a new modeset is requested and the atomic
test fails, all is undone and reverted to this last knowing mode.
Currently included are:
* the mode
* global position
* transformation
This is only done on a modeset not when going to DPMS.
Test Plan:
Selected the not working vertical rotation and nothing bad
happened.
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8602
Summary:
This change hooks up the drm plane rotate with the rotation requests
from KScreen. Our requests support more than what KScreen exposes in the
UI, that is all the flipped variants. I do not really understand what
the flip means, so this is not implemented yet.
Furthermore this only implements the visual rotation and not the input
rotation. This means mouse movement and touch input is currently broken
on a rotated screen.
Please note that the hardware I used seems to not support the vertical
rotation. I'm not sure whether my code works. On my system it just
results in atomic commit errors and we need to go back to a previous
working state. This is not yet implemented. I need to test the vertical
rotation on my notebook, which should (in theory) support it.
Reviewers: #kwin, #plasma, subdiff, sebas
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8594
Summary:
A preparation step to support rotation of outputs. The idea is to rotate
using DRM directly and not add it to the compositors. With this change
and a small hack to try it, I was able to rotate the screen.
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8582
Summary:
Under wayland we support high DPI putting by putting a separation
between the logical co-ordinate system and the resolution of rendered
assets.
When a window is on a high DPI screen, we should render at the higher
resolution.
Like the window scaling this handles any combination of a 2x scaled
decoration being rendered on a 1x screen or vice versa.
---
This patch is a bit different from the other scaling stuff. We have to
generate the quads *before* we have an updated texture with the new
scale. This means the scale isn't attached to the buffer like elsewhere.
That's why I added a property in TopLevel so there's still one canonical
source and things can't get out of sync.
BUG: 384765
Test Plan:
Crystal clear breeze and oxygen decos on my @2x display
Drag windows to attached @1x display, things still look OK when across 2
screens
Changing the scale of a screen updated the decos instantly
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8600
Summary:
For software QtQuick rendering we want to create a pixmap buffer and
render our contents in there.
m_rendercontrol->grab does this, but also covers the GL side in pretty
much the same way that we were currently doing.
In doing so I found a bug in Qt, that's submitted upstream, and also worked round.
Test Plan:
Tested with forced software mode, could see an Aurorae decorations
Tested without (so normal code), could see an Aurorae decorations
Tested wayland on nvidia with software rendering, didn't freeze
Whether we then end up using GL, painter or xrender rendering is irrelevant
(but I tested two of them anyway)
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, apol, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8039
Summary:
- Actually use double layered compositing, previously both layers were
of type HWC_FRAMEBUFFER, instead of 2nd layer being
HWC_FRAMEBUFFER_TARGET. Thanks to @NotKit on telegram for pointing this
out.
- Use sourceCropf instead of sourceCrop, as sourceCrop is legacy option.
Test Plan: have to test on actual device, but test_hwcomposer does have similar code.
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8587
Summary:
This change hooks up the bits for changing the mode when a request to
change mode from kscreen is received. This includes:
* setting new mode in DrmOutput
* creating new buffers in SceneQPainter backend
* creating new GbmSurface in SceneOpenGL backend
Room for improvement:
* detect whether the new mode works and go back to old one if it fails
Test Plan:
Started both a QPainter/OpenGL session. Used kcmshell5 kscreen
to modify the resolution. Saw that it got applied, maximized a window to
verify it's correct. Changed back to original resolution. Verified it looked
good by maximizing a window.
Reviewers: #kwin, #plasma, subdiff, sebas
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8398
Summary:
Under wayland we support high DPI putting by putting a separation
between the logical co-ordinate system and the resolution of rendered
assets.
I didn't include window decorations in the previous wayland scaling
patchset. They were drawn them at a standard resolution, which is
implicitly scaled up.
This uses the Qt scaling, meaning oxygen and breeze (and others) get
perfect high DPI support with zero client changes.
Like the window scaling this handles any combination of a 2x scaled
decoration being rendered on a 1x screen or vice versa.
CCBUG: 384765
Test Plan:
export KWIN_COMPOSE=Q
Had two screens of different scales
It was the right size on both (as before)
Was super-sharp on the fancy screen
Reviewers: #plasma, hetzenecker, graesslin
Reviewed By: #plasma, graesslin
Subscribers: ngraham, graesslin, plasma-devel, kwin, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8504
Summary:
We want to translate by the monitor position, so that needs to be
the negative of the position.
But Kwin/KScreen treats 0 as the top of all monitors. GL treats 0 as
bottom, so that all needs inverting.
Hence this should be a positive y value for the viewport.
BUG: 386099
BUG: 385655
Test Plan:
Had two monitors
Side by side was - fine
Stacked vertically - still fine
Modded X code to extend in y instead of x.
3 monitors worked fine.
Nested wayland only seems to support one screen?
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8479
Summary:
there is no need for createOutput to be static, make it non-static,
this also fixes the build failure introduced in commit
02d3daf28a.
Test Plan: builds
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8430
Summary:
On Wayland we have the sync disabled as it doesn't work properly. This
allows us to also move the sync event handling into the X11 standalone
platform.
The code is slightly refactored: instead of passing the event to each
Client, we search for the matching Client. For that the SyncAlaram struct
is added to public section of Client. The method to handle the sync
doesn't need the event any more and is moved from events.cpp to
client.cpp.
Test Plan:
Run Xephyr+kwin_x11, resized a window and verified through
gdb breakpoint that the sync still works
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D7942
Summary:
With the new try of all compositor types supported there is an automatic
fallback from OpenGL to XRender/QPainter in case OpenGL setup failed.
So there is no need to invoke a method to do just that.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D8364
Summary:
The test DontCrashUseractionsMenu (Waylandonly) found an issue in our
screen handling implementation in the QPA. The code exposed a short time
frame between the dummy screen getting destroyed and the first screen
being added. This could result in a crash of KWin.
There is actually no need to implement Screen on top of Wayland screen.
KWin has all the knowledge, so we can also base this on top of the
Screens API.
Advantages:
* no delays due to Wayland roundtrips
* handle screen getting removed (was a TODO)
* handle resolution changes (was a TODO)
The new implementation has a disadvantage that it destroys and readds
all screens whenever something around the screen changes. This shouldn't
be an issue in practice as it's only for the internal QPA and thus only
affects KWin internal windows which is placed in global coordinates
anyway. If it turns out to be a problem we need to track better the
screen changes - so far those were not tracked at all.
Test Plan: Run a few unit tests which change screens
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8345
Summary:
Allows to share the implementation in a better way and is a requirement
to get the Screen implementation in the QPA plugin to be based on
KWin::Screens instead of KWayland::Output.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8344
Summary:
So far KWin does not know which Compositors the platform actually
supports. This results in KWin happily trying to use the OpenGL
compositor on fbdev or the QPainter compositor on hwcomposer although
that is obviously going to fail as the platform doesn't support this.
By adding a pure virtual method all Platforms can define what they
support. In a later step the Compositor can use this to create an
appropriate scene and also perform proper fallback handling in case the
scene creation fails.
Test Plan: Compiles
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8316
Summary:
The Platform API is extended by a call to create the EffectsHandler. In
X11 standalone Platform a new EffectsHandlerImplX11 is added which
contains the X11 only parts of the EffectsHandler, such as grabbing the
X keyboard and the X11 mouse interception window.
The EffectsHandlerImpl gains some virtual methods for the parts which
are now done in the X11 specific implementation. In return we get rid of
lots of if-else structures checking for the operation mode.
Test Plan: Only compile tested.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7955
Summary:
In 47343fb we made GBM buffer shared.
What we wanted to do was:
Unbox the shared_pointer<GBMSurface> to give us a GBMSurface* object
Call the gbm_surface*() on that operator
Then cast that to a void* for eglCreatePlatformWindowSurfaceEXT
What we did:
Cast the std::shared_ptr<GBMSurface> to a gbm_surface* then cast that
to void*.
This is just a garbage value and it crashes in Mesa when we do our first
paint.
I've replaced that with an explicit method then we can use shared_ptr's
-> operator rather than get() which does the right thing in a readable
way.
Test Plan:
It crashed after rebasing to master (for Aleix too)
No longer crashes
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8251
Summary:
In 47343fb we made GBM buffer shared.
What we wanted to do was:
Unbox the shared_pointer<GBMSurface> to give us a GBMSurface* object
Call the gbm_surface*() on that operator
Then cast that to a void* for eglCreatePlatformWindowSurfaceEXT
What we did:
Cast the std::shared_ptr<GBMSurface> to a gbm_surface* then cast that
to void*.
This is just a garbage value and it crashes in Mesa when we do our first
paint.
I've replaced that with an explicit method then we can use shared_ptr's
-> operator rather than get() which does the right thing in a readable
way.
Test Plan:
It crashed after rebasing to master (for Aleix too)
No longer crashes
Reviewers: #plasma
Subscribers: plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8251
Summary:
The gbm_surface is owned by the EglGbmBackend, but it's not the only one
using it. The DrmSurfaceBuffer is also using it and needs it to destroy
the gbm_bo. Now this can become a problem in the following situation:
* a page flip is still pending
* the EglGbmBackend destroys the gbm_surface
-> when the page flip happens the DrmSurfaceBuffer will try to destroy
the gbm_bo and crash as the gbm_surface is no longer valid. This
situation can happen when switching screens or when switching compositing
backend (OpenGL 2 -> OpenGL 3).
To address this problem a class GbmSurface is added which wrapps the
gbm_surface pointer. The EglGbmBackend creates and holds a shared pointer
to the GbmSurface and passes that one to the DrmSurfaceBuffer. So when
cleaning up the gbm_surface only the shared pointer is reset and in case
the DrmSurfaceBuffer still needs it, it can access it without problems.
BUG: 385372
FIXED-IN: 5.11.0
Test Plan: Not yet
Reviewers: #kwin, #plasma, subdiff
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8152
Summary:
Unfortunately a rather large change which required more refactoring than
initially expected. The main problem was that some parts needed to go
into platformsupport so that the platform plugins can link them. Due to
the rather monolithic nature of scene_opengl.h a few changes were
required:
* SceneOpenGL::Texture -> SceneOpenGLTexture
* SceneOpenGL::TexturePrivate -> SceneOpenGLTexturePrivate
* texture based code into dedicated files
* SwapProfiler code into dedicated files
* SwapProfiler only used in x11 variants
* Safety checks for OpenGL scene moved into the new plugin
* signal declared in SceneOpenGL moved to Scene, so that we don't need
to include SceneOpenGL in composite
Test Plan: Nested OpenGL compositor works
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7740
Summary:
A dedicated X11EventFilter is added and created from the X11Cursor in
case we have XFixes. This means some more X11 specific code is now only
on X11.
Test Plan: Only compile tested.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7843
If the system has a virtual device and KWin is run on virtual platform
we can assume the user intended that KWin should use the virtual device
and not a render node of the system.
This might fix the random test failures on build.kde.org (T6546).
Summary:
Only needed for kwin_x11 variant (required for the non-composited
Outline). As that's nowadays in the x11 platform, we can move the
complete XRenderUtils support into the platform. Thus KWin core does
no longer require to link it.
Test Plan: Compiles
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7760
Summary:
After changing the output configuration, the client expects that it is informed
whether or not a new configuration has been applied (or failed). This was ommitted
so far, meaning that clients wouldn't know what happened in kwin.
Since we don't track if a setting failed yet, send the applied() signal regardless.
CCBUG:384733
Test Plan: Verified that the signal arrived in libkscreen after changing scale of an output
Reviewers: graesslin, davidedmundson
Reviewed By: davidedmundson
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7910
