when the option changes, the compositor needs to update
the state as it will later not act (in the disabled case)
and should to reflect the option change.
REVIEW: 111867
BUG: 322633
FIXED-IN: 4.11
* "" needs to be wrapped in QStringLiteral
* QString::fromUtf8 needed for const char* and QByteArray
* QByteArray::constData() needed to get to the const char*
Qt 5 only supports raster which means our pixmaps are always non native,
so we don't need the Extension information any more and can drop all
special code handling for mapping a native QPixmap to an X11 pixmap.
The behavior for creating a pixmap for a window is moved from Toplevel
into a dedicated class WindowPixmap. Scene::Window holds a reference to
this class and creates a new WindowPixmap whenever the pixmap needs to be
discarded. In addition it also keeps the old WindowPixmap around for the
case that creating the new pixmap fails. The compositor can in that case
use the previous pixmap which reduces possible flickering. Also this
referencing can be used to improve transition effects like the maximize
windows effect which would benefit from starting with the old pixmap.
For XRender and OpenGL a dedicated sub-class of the WindowPixmap is
created which provides the additional mapping to an XRender picture and
OpenGL texture respectively.
BUG: 319563
FIXED-IN: 4.11
REVIEW: 110577
This was currently basically broken:
* Screen number got always attached
* openGLIsBroken did not check for screen number
-> KCM reported "everything is fine" while it wasn't
Now changed to:
* only attach screen number if it is a multi-head setup
* use same logic in both Composite and CompositingPrefs
Still problematic:
* kcm is not multi-head aware so it will report everything is fine in
case of a broken multi-head setup
REVIEW: 110631
We always reset with the complete window geometry, so the subtracting
doesn't make any sense. We can just always set the damage to an empty
region.
REVIEW: 110438
The CM selecton withdraw delay was introduced to mostly unburden
plasma from recreating the theme on temporary changes, but since
plasma also watches some properties hinting supported features
and acts in consequence, this isn't sufficient and actually causes
two theme changes instead of one in the case of a regular suspend
REVIEW: 110232
CCBUG: 179042
stealing it from ourself is reported to be able
to confuse KWindowSystem about the state.
Also it causes minor but unnecessary overhead.
REVIEW: 110231
CCBUG: 179042
Overall all notifications except compositing suspended by DBus were
configured by default to not have any action. This means all the time we
emit a notification we keep DBus and KDED busy for nothing.
All the cases when a notification is triggered ire also exported to
KWin scripting, so if one really needs to handle something in case a
window is moved, it could be done through a KWin script with much more
context about the event.
REVIEW: 110113
BUG: 258097
FIXED-IN: 4.11
The define KWIN_SINGLETON adds to a class definition:
public:
static Foo *create(QObject *parent = 0);
static Foo *self() { return s_self; }
protected:
explicit Foo(QObject *parent = 0);
private:
static Foo *s_self;
There is an additional define KWIN_SINGLETON_VARIABLE to set a different
name than s_self.
The define KWIN_SINGLETON_FACTORY can be used to generate the create
method. It expands to:
Foo *Foo::s_self = 0;
Foo *Foo::create(QObject *parent)
{
Q_ASSERT(!s_self);
s_self = new Foo(parent);
return s_self;
}
In addition there are defines to again set a different variable name and
to create an object of another inheriting class.
All the classes currently using this pattern are adjusted to use these
new defines. In a few places the name was adjusted. E.g. in Compositor
the factory method was called createCompositor instead of create.
REVIEW: 109865
Many headers included KLocale to use i18n and co. But those methods are
defined in KLocalizedString and not in KLocale.
With KF5 klocale.h does no longer include KLocalizedString causing lots
of compile errors.
either by
- forcing fullrepaints unconditionally
- turning a repaint to a full one beyond a threshhold
- completing the the backbuffer from the frontbuffer after the paint
BUG: 307965
FIXED-IN: 4.10
REVIEW: 107198
With Qt5 QCursor does no longer provide ::handle() which was used to
set a cursor on a native XWindow for which we do not have a QWidget.
Also KWin has had for quite some time an optimized version to get the
cursor position without doing XQueryPointer each time ::pos() is called.
These two features are merged into a new class Cursor providing more or
less the same API as QCursor.
In addition the new class provides a facility to perform mouse polling
replacing the implementations in Compositor and ScreenEdges.
For more information about the new class see the documentation for the
new class in cursor.h.
The comment says it all: update all settings which can be done through
the compositing KCM. Years ago screen edges was in the composite KCM, but
it no longer is. So there is no need to update the edges when the
compositing settings changes.
Use WindowAttributes and WindowGeometry everywhere where the xcb commands
had already been used.
Introduces another wrapper for overlay window and a subclass for query
tree which also wrapps the children command.
The ownership for virtual desktops is moved from Workspace into a new
VirtualDesktopManager. The manager is responsible for providing the count
of virtual desktops and keeping track of the currently used virtual
desktop.
All methods related to moving between desktops are also moved from
Workspace to the new manager, though all methods related to Clients on
Virtual Desktops remain in Workspace for the time being. This is to have
the new manager as independent from KWin core as possible.
An rather important change for the handling of virtual desktops is that
the count and the id of a desktop is now an unsinged integer instead of
an integer. The reason for that is that we cannot have a negative count
of desktops as well as it is not possible to be on a desktop with a
negative identifier.
In that regard it is important to remember that a Client can be on a
desktop with a negative identifier. The special value for a Client being
on all desktops is handled by using -1 as a desktop. For the time being
this is not adjusted but instead of comparing the virtual desktop ids one
should prefer to use the convenient methods like isOnDesktop and
isOnAllDesktops. This would allow in future to internally change the
representation for on all desktops.
If a section of comments consists of a list of links and all are broken
it's a sign that nobody has used these comments for a long time...
REVIEW: 107933
Use XDamageReportNonEmpty instead of XDamageReportRawRectangles.
In XDamageReportNonEmpty mode the server generates a single damage
event when the damage state transitions from not-damaged to damaged.
When the compositor is ready to paint the screen, it requests the
damage region for each window and resets the state to not-damaged.
With XCB we can request the damage regions for all windows in a
single roundtrip, making this the preferred mode.
This should reduce the number of wakeups and the time spent
processing damage events between repaints.
When turning off the compositor do not release the compositor selection
directly but delay it through a timer. The idea is that the internal
change when e.g. restarting the compositor or switching from XRender to
OpenGL should not be visible to the outside world.
This hopefully makes restarting the compositor more robust in Plasma due
to the SelectionWatcher sometimes reporting incorrect results.
When restarting KWin the change does not matter as the selection gets
force claimed by the new instance anyway.
CCBUG: 179042
REVIEW: 106844
The CompositingType enum turns into flags and two new values are
introduced: OpenGL1Compositing and OpenGL2Compositing.
Those new values are or-ed to OpenGLCompositing so that a simple check
for the flag OpenGLCompositing works in case of one of those two new
values. To make the generic check for OpenGL compositing easier a method
in EffectsHandler is introduced to just check for this.
The scenes now return either OpenGL1Compositing or OpenGL2Compositing
depending on which Scene implementation. None returns OpenGLCompositing.
SceneOpenGL turns into an abstract class with two concrete subclasses:
* SceneOpenGL1
* SceneOpenGL2
It provides a factory method which first creates either the GLX or EGL
backend which is passed to a static supported() method in the concrete
sub classes. These method can test whether the backend is sufficient to
be used for the OpenGL version in question. E.g. the OpenGL 2 scene
checks whether the context is direct.
The actual rendering is moved into the subclasses with specific OpenGL 1
and OpenGL 2 code. This should make the code more readable and requires
less checks whether a Shader is bound. This is now known through the
Scene: the OpenGL1 scene will never have a shader bound, the OpenGL2 scene
will always have a shader bound.
To make this more reliable the ShaderManager is extended by a disable
method used by SceneOpenGL1 to ensure that the ShaderManager will never
be used. This also obsoletes the need to read the KWin configuration
whether legacy GL is enabled. The check is moved into the supported
method of the OpenGL2 scene.
REVIEW: 106357
The new methods suspend and resume are meant to provide a better way to
influence the current compositing state than toggleCompositing. In
addition an overload setCompositing(bool) is added. The resume method is
implemented in a way that it can be used to try to start the compositor
again in case it failed.
Internally the method suspendResume is dropped as it does the same as
setCompositing just with inverted binary logic and worse name. The
compositingToggled signal is now emitted from within setup and finish to
ensure that especially the compositingToggled(true) signal is only
emitted if the Compositor could start.
Also the updateCompositingBlocking is adjusted to use the new dedicated
suspend and resume methods instead of the toggle method.
REVIEW: 106273
Two new interfaces are introduced:
* org.kde.kwin.Compositing
* org.kde.kwin.Effects
The Compositing interface is generated from scriptable elements on the
KWin::Compositor class and the Compositor is exported as /Compositor.
It provides the general Compositing related D-Bus methods like whether
the compositor is active and toggling and so on.
The Effects interface is generated from scriptable elements on the
KWin::EffectsHandlerImpl class and the instance is exported as /Effects.
It provides all the effects related D-Bus methods like loading an effect
or the list of all effects.
This removes the need to have all these methods provided on the global
org.kde.KWin interface. For backwards compatibility they are kept, but
no longer provided by the Workspace class. Instead a new DBusInterface
is generated which wrapps the calls and delegates it to one of our three
related Singleton objects:
* Workspace
* Compositor
* EffectsHandlerImpl
The Compositor class actually behaves like a Singleton so it should be
one. Therefore four static methods are added:
* self() to access the Singleton
* createCompositor() to be used by Workspace to create the instance
* isCreated() to have a simple check whether the Singleton is already
created
* compositing() as a shortcut to test whether the compositor has been
created and is active
The isCreated() check is actually required as especially Clients might
be created and trying to access the Compositor before it is setup.
The refactoring of Compositor starting with b1739c3 caused some
regressions due to variables in Workspace and Compositor not
being initialized. Furthermore there was a boolean logic error
in PaintRedirector causing the decorations not to paint.
BUG: 305875
Obsoletes the need to go through the Workspace object to get to
the Compositor.
TODO for future: make the Compositor being the parent object for
the EffectsHandlerImpl.
Closing Review and bug from this commit, which is the top most
of the patch series.
REVIEW: 106060
BUG: 299277
FIXED-IN: 4.10
For most actions where the compositor needs to perform an action
(e.g. scheduling another repaint) signals were already emitted.
So it's easier to just connect the signals to the Compositor
which in turn makes the code much more readable.
All signals are connected from the Workspace when either the
Compositor gets constructed or a Toplevel gets created.
The DBus signal which causes KWin to reinitialize the Compositor
is moved into the Compositor as everything can be handled from
there as well. This comes together with moving the restartKWin
functionality into the Compositor as it is only relevant there.
Restart will only happen if the wrong Qt graphicssystem is used
for the chosen compositing backend.
All the custom slot did was printing a debug statement and
calling finish. We do not need this debug statement. The times
of Compositors not part of Window Managers are over, so it is
extremely unlikely that we lose the ownership without KWin
going down anyway.
The Scene has always been created and destroyed inside what is
now the split out compositor. Which means it is actually owned
by the Compositor. The static pointer has never been needed
inside KWin core. Access to the Scene is not required for the
Window Manager. The only real usage is in the EffectsHandlerImpl
and in utils.h to provide a convenient way to figure out whether
compositing is currently active (scene != NULL).
The EffectsHandlerImpl gets also created by the Compositor after
the Scene is created and gets deleted just before the Scene gets
deleted. This allows to inject the Scene into the EffectsHandlerImpl
to resolve the static access in this class.
The convenient way to access the compositing() in utils.h had
to go. To provide the same feature the Compositor provides a
hasScene() access which has the same behavior as the old method.
In order to keep the code changes small in Workspace and Toplevel
a new method compositing() is defined which properly resolves
the state. A disadvantage is that this can no longer be inlined
and consists of several method calls and pointer checks.
Replaces the member variable which is actually not needed as a
pointer to the Workspace can always be retrieved through the
singleton accessor of Workspace.
All Workspace functions which were implemented in the file composite.cpp
were moved to an own class Compositor. The header entries were moved as well.
All functions calls are updated.
All methods and variables related to the User Actions Menu
(rmb window deco, Alt+F3) is moved out of the Workspace class
into an own UserActionsMenu class.
The class needs only a very small public interface containing
methods to show the menu for a Client, closing the menu and
discarding the menu. Everything else is actually private to the
implementation which is one of the reasons why it makes sense
to split the functionality out of the Workspace class.
As a result the methods and variables have more sane names and
the variable names are standardized.
REVIEW: 106085
BUG: 305832
FIXED-IN: 4.10
Effects can specify their minimum requirements in their
desktop file:
* OpenGL
* OpenGL 2 (GLSL required)
* Shaders (either ARB or OpenGL 2)
The configuration module uses this information in combination
with which backend KWin is currently using. So if e.g. OpenGL
is used and an effect requires OpenGL 2 a detailed error
message can be showed that OpenGL 2 is required.
BUG: 209213
FIXED-IN: 4.9.0
REVIEW: 104847
Client::manage calls setupCompositing on the not
yet fully managed client before it wants to create
the window decoration. This means the decoration is
created twice and maybe even if not needed (noBorder
not yet set).
If the Client is not yet managed setupCompositing
will not update the decoration - it will be handled
by manage later on.
Furthermore if compositing is not active, setup
compositing does not have to perform any action.
REVIEW: 104758
By moving the query for effects into an own thread the
startup does not have to wait till all effects are loaded.
The thread moves the loading of the effects after the
Window Manager and Compositor has been fully initialized.
This is possible as EffectsHandler is fully functional even
without any effects.
The compositor ensures that at least one frame is rendered
before the started thread returns which makes the complete
startup more responsive.
REVIEW: 104583
Instead of getting the information from CompositingPrefs
the running KWin instance is queried through D-Bus.
In general the running KWin should have more information
about whether Compositing will work or not.
This means the kcm no longer has to link OpenGL.
REVIEW: 104753
Detecting CompositingPrefs invokes an external program. Waiting
for this can be moved in a second thread.
Due to the introduction of the thread the initialization order
of KWin is changed: the WindowManager is initialized before the
Compositor. Interestingly this makes KWin felt more responsive
as the screen is not frozen for several seconds.
REVIEW: 104579
Toplevel::setupCompositing returns a boolean value and returns
false in the cases where it has not setup compositing.
This is used by the specialization on Client to not perform the
Client specific setup if Toplevel has not setup.
REVIEW: 104767
This patch adds a new function Toplevel::addLayerRepaint, that in contrast
to addWorkspaceRepaint does not invalidate every blur texture cache that
overlaps with that region. As the name suggests it rather invalidates the
to the window associated layer at that position. This is especially useful
in the case of move/resize events in combination with oxygen-transparent,
where the altered window is almost always the topmost window and the blur
texture cache of the windows underneath are unchanged.
For the case of fully opaque windows the behaviour of addLayerRepaint
and addWorkspaceRepaint should be same.
REVIEW: 103906
Fixes a regression. When resize effect is available we can do a
fast resizing by only perform the resizing after the user ended
resizing the window.
REVIEW: 103363
sth. changed, possibly damage collection - dunno. however this now leads to undefined states as well
can't reproduce bug #280508 afterwards either - pot. implicitly fixing by bypassing pollution (BeFaded was
probably just resistent by different stacking order handling)
CCBUG: 280508
Instead of calculating the elapsed time from epoch clock, using
a QElapsedTimer as well as reusing the timer object instead of
creating a new one in the scene each frame.
REVIEW: 102473
