This commit expands the QImage-to-GL formatTable to include entries
for RGBX64, RGBA64_Premultiplied, and Grayscale16 image formats.
Uploading 16-bit-per-channel formats is supported by OpenGL and, with
the GL_EXT_texture_norm16 extension, GLES.
This ensures that we get a warning if the config header is not included
instead of compiling the code as if it was disabled. Interestingly, some
checks already used #if KWIN_BUILD_*, so those were generating -Wundef
warnings when the feature is disabled. Commit 886173cab assumed that all
those features were already 01, so this unbreaks the build if any of the
features is disabled.
Fixes: 886173cab ("Reduce ifdefs in Workspace::supportInformation()")
We should use the output area as the margin size as where to position
rather than the panelSize.
This ensures that the keyboard ends up in the right place right above
the panels.
This reverts commit 3d0bdc56a4.
seat->setFocusedPointerSurface() before notifyPointerMotion() is needed
to prevent sending a motion event that's outside the previously focused
surface.
BUG: 449273
It is automatically called (and documented as such) by KCModule
after the constructor is run.
This avoids calling a virtual method from the constructor.
Signed-off-by: Eike Hein <eike.hein@mbition.io>
None of the features it adds ontop of `QComboBox` are used.
Allows to drop the dependency on KCompletion.
Signed-off-by: Eike Hein <eike.hein@mbition.io>
Instead of having the render backends manage layers, have DrmGpu and DrmPipeline
do it. This makes it possible to unify code paths for leased and normal
outputs, remove some redirection and have more freedom with assigning layers
to screens.
It's leftover after the times when widget style was using wayland
connection. Breeze had to destroy all wayland resources before
terminating the internal connection.
Currently, the blur effect will shrink an opaque region even if it
doesn't intersect m_currentBlur.
This ensures that the blur effect won't do a stupid thing such as
clipping the opaque region of the desktop window.
We already try to ensure that the surface damage is within render target
bounds. Avoid clipping surface damage in render backend, which is a bit
excessive task and perhaps it should be done an abstraction level above.
If the main surface is translucent (e.g. it contains only the drop
shadow) but its subsurface is opaque, the "window->isOpaque()" check
will produce a false positive.
It's not guaranteed that there will be current render target in
postPaintScreen() as all painting have been completed. paintScreen() is
a much safer place to pick color.
It's not guaranteed that there will be current render target in
postPaintScreen() as all painting have been completed. Furthermore,
even the docs of the postPaintScreen() function indicate that no
painting should be done there, you can do only cleanup things, e.g.
schedule a repaint, etc. paintScreen() is a much safer place to
capture screenshot.
When casting from integer to pointer, promoting the integer to (u)intptr_t
will ensure that the resulting type can be converted to a pointer without
problems. These two casts changed in this commit trigger a warning when
building for CHERI-enabled architectures such as Arm Morello. This is not
just limited to CHERI, the cast from xcb_pixmap_t (uint32_t) to void*
should also be flagged by -Wint-to-void-pointer-cast when using Clang,
however, it appears that warning only handles C-style casts, and not
reinterpret_cast (https://github.com/llvm/llvm-project/issues/53964).
Software cursor has always been a major source of problems. Hopefully,
porting it to RenderLayer will help us with that.
Note that the cursor layer is currently visible only when using software
cursor, however it will be changed once the Compositor can allocate
a real hardware cursor plane.
Currently, software cursor uses graphics-specific APIs (OpenGL and
QPainter) to paint itself. That will be changed in the future when
rendering parts are extracted from the Scene in a reusable helper.
At this point, it's safe to assume that only X11 has weird rendering
model, which stands in the way of making rendering abstractions nice and
intuitive, so let's check operation mode. If OperationModeX11 is
dropped, this will also simplify finding X11-specific code in kwin.
This is the first tiny step towards the layer-based compositing in kwin.
The RenderLayer represents a layer with some contents. The actual
contents is represented by the RenderLayerDelegate class.
Currently, the RenderLayer is just a simple class responsible for
geometry, and repaints, but it will grow in the future. For example,
render layers need to form a tree.
The next (missing) biggest component in the layer-based compositing are
output layers. When output layers are added, each render layer would
have an output layer assigned to it or have its output layer inherited
from the parent.
The render layer tree wouldn't be affected by changes to the output
layer tree so transition between software and hardware cursors can be
seamless.
The next big milestone will be to try to port some of existing kwin
functionality to the RenderLayer, e.g. software cursor or screen edges.
The responsibilities of the Scene must be reduced to painting only so we
can move forward with the layer-based compositing.
This change moves direct scanout logic from the opengl scene to the base
scene class and the compositor. It makes the opengl scene less
overloaded and allows to share direct scanout logic.
Consider the cases where we get a touch move or touch up but we never
received a touch down before.
In the case of move, we'll simulate a touchDown right there and move on
with reality.
In the case of touch up, we'll just ignore the event as simulating could
just be more confusing.
BUG: 450338
Xcursor loading code has hardcoded search paths, in order to take into
account distros installing app data in a different location,
libwayland-cursor sets the ICONDIR to the icon directory computed based
on the install prefix.
However, that won't work with gitlab CI because it relocates binaries. A
more robust way to find cursors would be to use QStandardPaths to find
all the icon directories on the system.
Another advantage of using own cursor loading code is that it allows us
to reuse cursor images that are symlinks. For example, with
breeze_cursors, almost half of the files in the cursors directory are
symlinks.
The main disadvantage of this approach is that we would have to keep the
search paths up to date. However, on the hand, there are not that many
of them, e.g. ~/.icons, ~/.local/share/icons, /usr/share/icons,
/usr/local/share/icons. The last three are implicitly handled by the
QStandardPaths.
It's specified as a Path in the kcfg file and the KCM will replace the
/home path into $HOME, and I imagine it may do some others likethat.
BUG: 450430
Rather than assuming the input panel to always be less than or equal to
the maximized area, ensure it is. This ensures that the input panel gets
placed correctly when there maximized area is smaller, like when there's
a panel on the side.
Additionally, don't skip the entire positioning code when "m_output" is
empty, to avoid the placement not happening when Kickoff is open.
Whilst global shortcuts are blocked by grabbing the keyboard, user set
up manual scripts can still invoke a global action.
Given we already have code to deactivate when locking it makes sense to
also prevent activation.
BUG: 450331
qApp is defined differently depending on whether QCoreApplication,
QGuiApplication, or QApplication is included.
Use QGuiApplication::instance() to improve code readability.
CCBUG: 450359
qApp is defined differently depending on whether QCoreApplication,
QGuiApplication, or QApplication is included.
Use QGuiApplication::instance() to improve code readability.
CCBUG: 450359
This really should not fail unless we did something seriously wrong
on our end, such as changing GL context during paintScreen.
If we add an invalid `GLSync` to the queue it can lead to very hard
to debug crashes in seemingly unrelated parts of the rendering
process, when the queue is drained, potentially seconds after the
actual failure that occurred here.
Signed-off-by: Eike Hein <eike.hein@mbition.io>
If a window appears on the screen, the highlight window effect will try
to fast-forward animation to the target state by setting the animation
duration to 0. However, TimeLine doesn't like that because it will
eventually lead to division by zero.
This change makes the highlight window effect fast-forward the
transition to highlight or ghost state by using the complete() function.
BUG: 450323
Allows to drop the direct dependency on KDeclarative only used
for `QmlObjectSharedEngine` outside of `KCModuleQML`
Signed-off-by: Eike Hein <eike.hein@mbition.io>
paintScreen() already tries to ensure that the damage region doesn't go
outside the scene geometry. With this change, it will try to clip the
damage region to the render target rect, which saves us an extra region
intersection and simplifies code that calls paintScreen().
Having a render loop in the Platform has always been awkward. Another
way to interpret the platform not supporting per screen rendering would
be that all outputs share the same render loop.
On X11, Scene::painted_screen is going to correspond to the primary
screen, we should not rely on this assumption though!
Neither SceneQPainter nor SceneOpenGL have to compute the projection
matrix by themselves. It can be done by the Scene when setting the
projection matrix. The main benefit behind this change is that it
reduces the amount of custom setup code around paintScreen(), which
makes us one step closer to getting rid of graphics-specific paint()
function and just calling paintScreen().
This allows us to make the GLRenderTarget a bit nicer when using it to
wrap the default fbo as we don't know what the color attachment texture
is besides its size.
This means that the responsibility of ensuring that the color attachment
outlives the fbo is now up to the caller. However, most of kwin code
has been written that way, so it's not an issue.
It's effectively unused and removing it allows us to get rid of
GLTexture field, which is very useful for abstracting the concept of a
"render target" across OpenGL and QPainter backends.
It's currently being used only by the X11 standalone backend. We should
either port the X11 backend to manual dirty state tracking or waiting
until it gets dropped. The main motivation for getting rid of the dirty
state tracking in the GLTexture is that it keeps kwin open for
alternative opengl wrappers, e.g. QOpenGL, and it simplifies GLTexture
code.
Because the GLRenderTarget and the GLVertexBuffer use the global
coordinate system, they are not ergonomic in render layers.
Assigning the device pixel ratio to GLRenderTarget and GLVertexBuffer is
an interesting api design choice too. Scaling is a window system
abstraction, which is absent in OpenGL or Vulkan. For example, it's not
possible to create an OpenGL texture with a scale factor of 2. It only
works with device pixels.
This change makes the GLRenderTarget and the GLVertexBuffer more
ergonomic for usages other than rendering the workspace by removing all
the global coordinate system and scaling stuff. That's the
responsibility of the users of those two classes.
In order to support layered rendering and tiled outputs KWin needs to be
able to split rendering of outputs into multiple surfaces. This commit
prepares the drm backend for that, by moving most of the code in EglGbmBackend
out to a EglGbmSurface class, which will later be used for overlay surfaces
and rendering to multiple connectors side by side.
In doing that, this commit also cleans up the code a bit, removes a lot of
now unnecessary multi-gpu stuff and potentially makes modesets a little
bit more efficient by re-using resources more often.
This allows to track per effect dependencies more precisely. The main
problem with a library and a comment next to it saying who needs it is
that the comment can get easily outdated.
/proc/%/exec always points to the canonical/real path of a binary,
the exec field of a .desktop might contain a symlink and therefore
differ from canonical path.
Explicitely canonicalizing the path in exec prevents this mismatch.
The first move() in X11Client::createDecoration() will alter the client
size, which will result in the subsequent resize() incorrectly resizing
to a smaller window size.
In order to fix that issue, this change makes X11Client adjust the
frame geometry atomically after creating or destroying window decoration.
BUG: 449988
If the window is initially maximized, there won't be any current
decoration when XdgToplevelClient changes the maximize mode, we need to
use m_nextDecoration.
BUG: 450053
With the xdg_toplevel.configure_bounds event, the compositor will be
able to indicate the client the maximum desired surface size.
It can be used to prevent mapping too big application windows, etc.
We're setting this env variable because earlier we used it to force kwin to use its special QPA so we need to change that back to something sensible.
However setting it to Wayland breaks apps that ship their own Qt with missing or broken Wayland support.
Set it to be empty instead. Well-behaved Qt apps will use Wayland regardless because of XDG_SESSION_TYPE.
BUG: 450000
When a window leaves the current virtual desktop, we need to schedule a
workspace repaint so the compositor repaints the old region of the
window on the current desktop.
In hindsight, the scene graph must schedule a repaint, but it's not
doable with the current effects api, it will be changed with future
refactoring changes.
BUG: 444172
Otherwise we get the filename to the library and not the KPackage.
The plugin having this set is most likely a leftover, because KPackage plugins
to not need to define a library.
BUG: 449881
QPlatformScreen::virtualSiblings() must return a list of screens on the
virtual desktop, otherwise QToolTip will use
QGuiApplication::primaryScreen() instead of looking up the screen where
the decoration tooltip must be shown using QDesktopWidget::screenNumber().
BUG: 432860
recordFrame requires an openGL context. This is typically done after a
frame is rendered, but when we send a frame after a cursor move this is
not guaranteed.
BUG: 448162
Despite the argument naming, the input for WindowMotionManager::calculate is supposed to be a
delta, not an absolute time. Giving it a delta fixes the PresentWindows in the DesktopGrid.
BUG: 443971
The quads for the left and right window decorations were broken in
3b4d55837. The problem is only visible for window decorations with more
than one color.
Currently, if kwin_wayland crashes at shutdown, the launcher can
potentially spawn it again. This change addresses that issue by making
the wrapper ignore the QProcess::finished() signal.
Mixing of current and next state can create all sorts of undefined
behavior, e.g. windows not moving to the desired location or
experiencing issues when tiling a maximized window.
BUG: 449541
Currently, the Cursors::currentCursorChanged signal is wired to the
updateCursor() function which calls xcb_xfixes_hide_cursor() or
xcb_xfixes_show_cursor() depending if the cursor is hidden. However, the
currentCursorChanged signal can be emitted if the cursor changed, e.g. a
new pixmap attached, or its visibility status changes.
The zoom effect hides the pointer, but when user hovers ui elements, it
will most likely change and result in more than one xcb_xfixes_hide_cursor()
calls.
It appears like xcb_xfixes_hide_cursor() is implemented as a reference
counter, i.e. if xcb_xfixes_hide_cursor() is called two times, then you
must call xcb_xfixes_show_cursor() two times as well.
This change adds a dedicated signal to indicate whether the cursor is
hidden to avoid calling xcb_xfixes_hide_cursor() multiple times while
the screen is scaled.
BUG: 448537
With connection(), we will look up the x11 connection property on
kwinApp() object, which is less efficient than just calling a method on
the app object.
Since the base Platform::applyOutputChanges() implementation only
applies changes to enabled outputs, it's not possible to re-enable a
previously disabled output.
While there's a fullscreen effect, the fall apart effect should avoid
animating windows as it can corrupt or interfere with the active full
screen effect. This matches behavior of many other animation effects in
kwin.
BUG: 449844
QPainter won't let paint with a device pixel ratio less than 1. There
are used to be workarounds to force a device pixel ratio of 1, but they
were removed with fractional scaling corner fix.
This change makes sure that the decoration renderer forces a device
pixel ratio of 1 if the output's scale factor is less than 1 so
calculated texture coordinates match where window borders are rendered
in the texture atlas.
BUG: 449681
They're error prone and don't really work for changing modes. Having
a current mode in DrmConnector also doesn't work well together with
the transactional style of how DrmPipeline operates
AbstractClient::setQuickTileMode() no longer updates electric border
mode, which can leave AbstractClient::electricBorderMode() with an old
value at the next interactive move and potentially result in quick
tiling not work if the user decides to untile and then tile the window
again while still holding left button.
Quick tiling allows you tile a window so it covers one half or a quarter
of the screen. Electric border is basically interactive flavor of quick
tiling, i.e. it allows you to drag a window to the top screen edge to
maximize it.
Currently, it's confusing that tile geometry is computed based on the
electric border mode.
This change converts electricBorderMaximizeGeometry() in a helper that's
used to compute the tile geometry given the desired mode and output
containing the specified QPoint. With that, setQuickTileMode() won't
need to set electric border anymore, which makes tiling code more
comprehensible, but by not a lot unfortunately.
XdgToplevelClient::setFullScreen() won't change the geometry
immediately, so workspace()->updateFocusMousePosition() can be removed.
Also, input handling code takes care of updating the cached mouse
position in the workspace.
If the user wants to move a tiled window, but changes their mind and
tiles the window back to the previous position, the geometryRestore()
will be corrupted because initialMoveResizeGeometry() is the same as the
geometry of the window in the tiled mode.
This change fixes tracking of the geometry restore by precomputing the
geometry restore when starting interactive move. That way, if the window
is untiled and tiled again without release left pointer button, the
geometry restore will be set to the correct value in setQuickTileMode().
This change also adjusts the test suite so such a subtle case won't be
broken again without noticing it.
There was no handling for the drop being cancelled at all, leading to
leaked WlVisit and XtoWlDrag objects. X clients could also be confused
about the state of the drag and for example not being able to start another
drag.
BUG:449362
Flickable by default allows swiping via click-and-drag or
scrolling with the mousewheel, which is weird when the content
is smaller than the available space.
Inhibit this behavior unless there's a need for scrolling.
The present windows effect can crash because a null (0) EffectScreen can
be passed to EffectsHandler::clientArea(), which is a bug.
Use EffectsHandler::virtualScreenGeometry() to get the bounding geometry
of all outputs.
BUG: 449508
The most recently activated window can be an overlay window that covers
all screens. If its center is not at an output with the fullscreen
window, then the fullscreen window's stack position won't be lowered. In
order to fix that, this change makes isActiveFullscreen() use
Toplevel::isOnOutput(), which uses geometry info, to check if both windows
are on the same output.
Since 4881dd63 replaced the double click timer for OffscreenQuickView
with a time check, we need to make sure the timestamp from
XInput/libinput is passed on to the actual QMouseEvent.
BUG: 448477
It can also be applied to client-side decorations. As long as the
compositor can ask the client to use some specific decoration mode, the
"no border" property can be set.
The implicit cast effectively rounds the value down, which make the
refresh rate be different from what KScreen actually wrote.
A better fix would be to use integers instead of floating point numbers
but that needs to happen in KScreen.
BUG: 448778
We'd trigger updatePrimary before Xwayland had reacted to the new output
so we wouldn't end up calling xcb_randr_set_output_primary() as
necessary.
BUG: 449099
When dragging from one window to another, we may end up in a data_device
that didn't get "data_device_start_drag". In that case, the internal
touch point serial will be incorrect and we need to update it to the
serial from the seat. The serial stored in the seat is changed to
std::optional so we can properly check if it is set.
A good portion of geometry handling code was written during the X11
times. The main difference between X11 and Wayland is that kwin doesn't
know where a window will exactly be after resize() or moveResize().
In order to handle Wayland specifics, every window has a bounding
geometry that is being manipulated by move(), resize(), and moveResize().
The frameGeometry(), the clientGeometry(), and the bufferGeometry() are
not manipulated by move(), resize(), and moveResize() directly. Almost
everything that manipulates geometry should use moveResizeGeometry().
This creates a problem though, since the clientGeometry() will be
updated only after the client provides a new buffer, kwin has absolutely
no idea what the client geometry for a given move resize geometry will
be.
Another side of the coin is that decoration updates are performed
asynchronously on wayland, meaning that you cannot use border properties
for anything related to geometry handling and you should avoid using
borderLeft(), borderTop(), borderRight(), and borderBottom() in general.
clientGeometry(), bufferGeometry(), and border*() are good only if you
want to forward an event or render something. They can't be used for
manipulating the geometry.
Unfortunately, AbstractClient::checkWorkspacePosition() needs both,
which is a bit of a problem. To add more oil to the fire, contents
of a decorated window can be snapped to a screen edge. This goes against
the nature of geometry updates on wayland, where we try to indicate
the bounds of the frame geometry and avoid using client and buffer
geometries.
In order to make geometry handling more correct on wayland, this change
removes the ability to snap the contents of a decorated window to a
screen edge. This allows to avoid using the client geometry in
checkWorkspacePosition(), which is a very important function that ensures
the window is inside the workspace.
There is nothing wrong with snapping the frame rather than its contents
and that's what kwin used to do. It was changed with the removal of
"Display borders on maximized windows" option, the relevant commit
didn't provide any reasoning behind the change.
The dpi of bouncing icon may not match the dpi of the screen, which
can make the linear filter sample texels from the opposite edge when
using the default wrap mode.
BUG: 448947
setWlSource will delete the X11Source while XToWlDrag did not
finish leading to potential crashes. Since it's only set when
creating a WlToXDrag, only remove it in this case.
We can also replace the virtual with a type check if we have to do
it anyways which also makes it clearer what is going on.
Detected using ASAN, declaration of the type is:
typedef union xcb_client_message_data_t {
uint8_t data8[20];
uint16_t data16[10];
uint32_t data32[5];
} xcb_client_message_data_t;
The SeatInterface cleans up currentSelection and currentPrimarySelection
when the AbstractDataSource::aboutToBeDestroyed() signal is emitted, but
since the data source and primary data source have parent objects, they
can be potentially destroyed without emitting the aboutToBeDestroyed()
signal and thus leaving dangling pointers in SeatInterface.
CCBUG: 449101
This will take care of showing user-visible error messages in case the
plugin does not exist.
While we get a log message from KCoreAddons with the change of 728b449891,
the user does not get prompted. Especially if the kcmshell/systemsettings
was not opened from the command line, spotting those error messages is more difficult.
Drag and drop objects slightly outlive wayland's DND concept as we have
to cancel the client and wait for a response.
This normally is fine, except in the case that the drag ended because
the sender quit.
Calling setWlSource on drag ends creates a matching pair with
Dnd::startDrag where we first set the source and has parralels with
clipboard.
Selection::handleSelectionRequest checks for the presence of a source.
I could not reproduce the original bug.
BUG: 448920
While in principle Mesa should already check if the buffer can be scanned
out, this may not always work. If we can't create a framebuffer object for
the buffer, fall back to compositing.
CCBUG: 448818
XCURSOR_SIZE * scale factor is not the way to compute the current cursor
size. For example, with breeze cursor theme at an output with a scale of
2 and cursor size 24, cursor images will have the effective size of (64, 64).
Also, the cursor can change when passing over user interface elements.
In order to accommodate for all of that, this change makes kwin reserve
enough of space for a cursor of size 256x256. "256" is a magical number
that comes from DRM. With many drivers, the maximum cursor size is 256.
BUG: 448840
If there's only one configure event that changes the position of the
window and it gets acknowledged but no buffer is attached yet, and a new
configure is sent, then the ConfigurePosition flag won't be inherited
by the new configure event and the window will be misplaced.
In order to fix that, this change makes XdgSurfaceClient pop the last
acknowledged configure event from the m_configureEvents list only when
it's about to be applied for sure.
BUG: 448856
Encoders are not really relevant for the test result, except that one of
the encoders for the connector must be compatible with the crtc.
The kernel usually exposes only a single encoder per connector for this
reason, but if a driver exposes multiple then that means KWin will do a
lot more tests than is necessary.
In order to prevent that from happening, do fewer syscalls and simplify
code, only check supported encoders once per connector.
When setting the default value for `ElectricCornerRatio` in the UI form
we also need to update the default indicator for this field.
*Default value for this setting is 25%*
| BEFORE | AFTER |
|---|---|
|||
BUG: 448886
FIXED-IN: 5.24
Historically, noBorder() was used for two things:
* as a substitute for AbstractClient::isDecorated()
* to determine whether the AbstractClient should have a decoration
With async decoration updates refactoring, a few things around
noBorder() have changed, which exposed an existing bug in the handling
of borderless maximized windows.
It's possible to have a case where an initially maximized window makes
an xdg_toplevel.set_maximized request before the initial commit, but
creates the decoration object after the initial commit.
Since XdgToplevelClient::userCanSetNoBorder() would return false when
maximize() is called in XdgToplevelClient::initialize(), m_userNoBorder
won't be updated and therefore the window can end up having a server
side decoration.
Previously, it wasn't the case because kwin would do nothing if the
decoration is installed and its preferred mode changes after the initial
commit but before the surface is mapped. With async decoration fixes,
kwin would react as expected, which unfortunately has exposed the bug.
The root cause of the problem is the fact that noBorder() is overloaded,
which makes it error-prone.
This patch changes how the noBorder property is treated. Now, it only
indicates whether the compositor wants the window to have no borders. If
noBorder() is true, it means that the compositor doesn't want the window
to have a server-side decoration; on the other hand, if noBorder() is
false, it doesn't imply that the window should have a decoration.
BUG: 448740
X11Client can grab pointer when starting interactive move or resize so
all pointer events go to it and kwin can update the move resize geometry
based on the current interactive move-resize mode.
However, on Wayland, X11Client::motionNotifyEvent() is disabled and
pointer events go through a code path that requires no X11 pointer grab.
This signal is sent back to the ksldapp after the greeter has registered
a window with the compositor. Only once ksldapp gets this signal does it
release the lock delaying suspend.
With xdgshell/layershell we have a roundtrip of configuring before the
window is even exposed, so we move to a different signal. This also
helps encapsulate lockscreen code.
Ideally we want to add code tracking frame rendering per screen tracked
too, but that would be based off this change.
CCBUG: 316734
On wayland cursors are managed by kwin. During a move resize operation
kwin updates its own cursors in pointer_input. There is no need to sync
any cursor changes back to the X server as we end up setting it twice.
19c471405e7eb4b6026db24d776d205125dbc013 introduced a regression if
there are two gbm backend and the backend fail to choose drm format.
This fix does two things:
1. Current buffer format should not be reset after create new buffer,
otherwise current.format may just be empty after resetOutput.
2. force xrgb 8888 need to be set on the primary backend.
BUG: 448790
If the user is currently typing, do not highlight windows based on the mouse position. If the user types a window title before the effect opening animation is finished, he ends up in a situation where only one window is on the screen but it is deselected (because the mouse is not on the window) or another window is selected because of the mouse. With this change, the mouse input does not overwrite the window highlighting based on the search entered **if the user is currently typing.**
As the placeholder output gets added or removed in response to other outputs
getting enabled or disabled, the output list may change while iterating over
them and applying changes.
BUG: 448454
BUG: 448474
CCBUG: 448697
FIXED-IN: 5.24
Currently, finishInteractiveMoveResize() relies on a hidden behavior
in the sendToOutput() function that makes it treat fullscreen windows
differently, which is confusing.
With this change, finishInteractiveMoveResize() will use the
checkWorkspacePosition() function to make sure that the geometry of the
fullscreen window is adjusted to the new monitor. It allows to make
sendToOutput() more straightforward.
It also fixes checkWorkspacePosition() using wrong geometry type in the
fullscreen window path.
A while ago, geometryRestore() had to have a sane value even if the
window is not maximized because checkWorkspacePosition() used it.
Since checkWorkspacePosition() doesn't use geometryRestore() anymore, we
can stop updating the geometry restore.
geometryRestore() is no longer updated after mapping the window, so
setQuickTileMode() has to update geometryRestore() explicitly to the
correct value.
With this change, geometryRestore() will be updated as follows:
* if the window is tiled, geometryRestore() is valid, nothing to do
* the window has been dragged to the top edge, set geometryRestore() to
the geometry that the window had when starting move
* otherwise, use the current move resize geometry
After calling setMaximize(), the window should cover the maximize area.
The commit message of 516ea86341 doesn't
explain why only the y coordinate is enforced or why the x coordinate is
not enforced.
In order to make some sense of the code, this change removes the semi-
random enforcement of the y coordinate.
If the window is inactive and it enters fullscreen mode for some reason,
it can create a situation where keyboard goes to a window occluded by
the fullscreen window.
This change makes XdgToplevelClient::setFullScreen() not raise the
window. It's the responsibility of whoever requested the fullscreen mode
change.
If the configure event is acknowledged, the window's stack layer will be
invalidated and recomputed. If the window is active, it will be promoted
to the ActiveLayer, otherwise its stack position won't change.
dontInteractiveMoveResize() was added to workaround kwin sending bad
configure events when double clicking mpv to make it fullscreen.
With async geometry updates fixed, dontInteractiveMoveResize() can be
finally removed.
Another reason to remove dontInteractiveMoveResize() is that it can make
kwin crash with a debug build. For example, if you enable resizing
maximized windows in breeze decoration settings and resize a maximized
window, kwin would eventually crash in
the AbstractClient::handleInteractiveMoveResize() function because neither
isInteractiveMove() nor isInteractiveResize() return true.
Based on the implementation of wl_display_connect, WAYLAND_SOCKET is
always preferred over WAYLAND_DISPLAY, which means it is OK to have both
of them set. This allows subprocess of input method to have the correct
WAYLAND_DISPLAY variable set.
As formats are per output and also checked on crtc changes, there
is no reason to restrict used formats to those that are supported
by all primary planes anymore.
When the crtcs get switched around between outputs, their primary
planes and thus the supported formats also get switched around. In
order to make sure that doesn't cause any problems, always check
whether or not the format+modifiers used are supported.
Otherwise animated cursors won't work. Hopefully, this will fix pointer
input test.
It would be great to refactor cursor handling so it's simpler, it can be
done later.
Userspace is expected to do a modeset and set link-status to good again,
if link-status gets bad. This is needed to prevent some black screen situations.
BUG: 448177
This was deprecated in during the 5.24 development period. All KDE
consumers are ported away from it. Third parties will get meaningful
runtime messages which instruct them to register the plugins without keywords.
The create overloads which take keywords were already deprecated in KPluginFactory.
Currently, the invert effect doesn't work because it can't load its
fragment shader because builtin effects are static libs. We need
Q_INIT_RESOURCE() before reading shader code.
This modularizes builtin effects more, which makes easier to add and
remove builtin effects, as well as allows to have per effect resources.
Technically, changing the inner workings of the ShaderManager is an
API incompatible change, but ShaderManager::generateShaderFromResources()
can be used only by builtin effects so it's okay.
ShaderManager::generateShaderFromResources() had to be changed because
two resource files can't share the same prefix. Appending "_core" was
inspired by QtQuick.
We need CMAKE_INSTALL_FULL_LIBEXECDIR, otherwise `lib/x86_64-linux-gnu/libexec/kwin-applywindowdecoration`
will be the resulting path, which does not contains the cmake install prefix.
Consequently KNS would fail to find it at runtime.
BUG: 447284
FIXED-IN: 5.24.0
After finishing interactive resize, the window needs to be gravitated.
However, it won't be gravitated because isInteractiveMoveResize() will
return false.
In order to fix that, every configure event needs to carry the gravity,
that way the window can be gravitated even after leaving interactive
resize.
The gravity concept is a generic way to describe how a window must be
positioned during interactive resize. It works both when resizing the
window using a pointer or touch.
X11Client implicitly relied on the finishInteractiveMoveResize() function
to call moveResize() to synchronize the move resize geometry with the
server geometry. However, after removing that moveResize(), X11Client
got slightly broken.
A resize sync request may arrive shortly after finishing resize. In
order to properly handle it, this change makes X11Client handle late
sync requests.
It also makes handling interactive resize on x11 similar to how it's
done on wayland.
The main problem with not letting X11Client finish interactive resize
is that the Toplevel::bufferGeometry() may end up with an outdated value
and SurfacePixmapX11 will fail to create due to a mismatch between
Toplevel::bufferGeometry() and the server side geometry of the frame
window.
KWin loads glGetGraphicsResetStatus() on its own to handle ARB and EXT
extensions. After moving graphics reset handling to the RenderBackend,
kwin doesn't use its own glGetGraphicsResetStatus() function, but instead
uses the one provided by libepoxy, which panics if
glGetGraphicsResetStatus() is not in core spec. This change makes the
OpenGLBackend use kwin's glGetGraphicsResetStatus() function instead of
the one provided by libepoxy to avoid a crash.
This adds support for reading values from a "Libinput/Defaults" group in
the input config file. This allows specifying global defaults for
devices, that are preferred over the libinput defaults. Because of the
cascading mechanisms of KConfig, this then allows distributions and
hardware vendors to supply system-wide defaults for devices.
Rather than an awkward combination of template functions, function
pointers and multiple calls to almost-the-same-but-not-entirely
functions, make ConfigData itself a template and use type erasure to
store them in the config map. This makes the data object aware of its
type and allows us to specialise the reading of config values through
template specialisation. It also removes the need for multiple
constructors and setters in the ConfigData object.
As of now, we update cursor metadata only when the screen content changes, but
this results into not having smooth cursor movement. We can update only mouse
cursor location when it changes and send an empty buffer with mouse cursor
metadata so clients can have update mouse location.
If the source rectangle is not set, we need to use the surface size
given by the attached buffer. It's computed as buffer size / scale, but
the buffer can also be transformed. In other words, we need to compute
the natural surface size as follows - buffer size / scale and transpose
the result if the buffer is rotated 90 or 270 degrees.
If the first condition would match (for instance after moving a window),
`windowMove` would be `nullptr`, triggering the crash later.
By the looks of it, it was maybe a typo.
BUG: 445335
FIXED-IN: 5.24
CC: @nicolasfella
This provides a better fix for the header positioning bug in
the properties list sheet, instead of the previous workaround
(which wasn't enough in some situations)
Upstream bugfix (in the Kirigami component) is not advisable as
it could cause unintended consequencies in other uses/apps
See also: https://bugs.kde.org/show_bug.cgi?id=422289
BUG: 421583
FIXED-IN: 5.24
Currently KWin always uses the Options configured in kxkbrc because
QByteArray::constData() is never nullptr. This means that the system
default is ignored completely. Read ResetOldOptions to distinguish
between explicitly setting no options and using the system default.
After recent refactor changes to improve resizing of xdg-toplevel
surfaces with an aspect ratio, the resize effect got really broken. The
resize effect has always been a problem child on wayland.
Unlike X11, geometry updates are performed asynchronously on Wayland.
It's not possible to have a smooth transition after finishing
interactive resize from the resized state to the normal state, geometry
will jump from last moveResizeGeometry() to the current frameGeometry()
and when the client repaints the window, the window size will jump back
to the move resize geometry size. There are no ways to fix that without
contradicting to how the effect is advertised to work, e.g. sending
configure events behind the back. Keeping the frame geometry out of sync
with the xdg_surface window geometry size is also not the option,
geometry updates are already too complex (due to being async).
Another wayland related issue with the resize effect is that the
compositor doesn't know about aspect ratio or any other size
constraints, except min and max size. The client can provide a smaller
buffer to account for various geometry constraints. It will be confusing
to have a mismatch between resize outline and the final real geometry.
Aspect ratio or other geometry constraints won't be exposed to the
compositor, it's a common decision of many wayland devs (including KDE).
To some extent, the wayland issues can be addressed by performing content
updates, with active feedback, the mismatch between outline and the
final geometry would become less severe, but it won't be any different
than resizing without the effect.
Given the wayland issues and in part maintenance costs, this change
drops the resize effect. Note that it can be still reimplemented without
kwin core changes, but it would still suffer from the aforementioned
issues.
BUG: 443434
Currently the plugin needs to set a property in oder to be considered configurable.
In kpackage we have the concept of optional and required files, based on the existence of those
optional files we can define different behavior. For example in Plasma the applets can optionally have a config ui.
Because here we don not use The KPackage:Package class, it is simpler to check the existence of the files on disk.
In KWin we are allowed to break compat and here all first party consumers
have already been ported for quite a while.
Also the querying is very inefficient, because for every plugin where the
X-KDE-ConfigModule property is not defined all available KCMs have to be opened and
their metadata parsed.
This way we also get rid of the deprecation warning for KPluginMetaData::readStringList.
Doe to 1a0031c08a3b41458eb5bf2097b4cd6452ba3d09 we no longer require json metadata to be embedded.
Also we did not use the metadata anywhere, except for finding the correct plugin.
This way we do not need to embed json metadata in the plugins
and can consequently drop the metadata files entirely.
The resulting metadata object might still be invalid, however KCoreAddons
can handle such cases. See https://phabricator.kde.org/T15094 regarding
create better KCoreAddons API for such cases.
Not sure if this was left out on purpose as a kind of deprecation.
It would be necessary to allow port the tabbox switchers to the newer 3.0 API and use their components (such as `Workspace`)
Probably for `Plasma/5.25` now.
It's consistent with m_nextDecoration and m_requestedStates contains
both requested and "not requested" states (i.e. the ones set by kwin
without waiting for acknowledged from the client, e.g. activated).
Running a Plasma Wayland session as root is not insecure, it is in fact the
opposite. There is no way for other users to somehow influence this session
due to the user separation and the user is more likely to only use this for
administrative actions. This is in contrast to regular user sessions, which
most likely start a mix of unprivileged programs next to privileged windows
like some with authorized kauth helpers or even just sudo in a konsole tab.
This change replaces abort() with Q_ASSERT and Q_UNREACHABLE() macros to
make kwin code base consistent. Besides that, Q_UNREACHABLE may
potentially provide the compiler more info that can be used to generate
more efficient machine code.
When moving or resizing a window on X11, the window based screen edges
won't receive pointer input, so handleInteractiveMoveResize() explicitly
pokes the ScreenEdges to check if there's any approached screen edge.
On Wayland, it's not an issue. This change moves X11-specific code to
X11Client to avoid checking screen edges twice.
When finishing interactive resize operation, the move resize geometry is
already good and the client should have sent the corresponding configure
event. So, this moveResize() call is redundant.
This change moves code that is responsible for quitting maximized
horizontally or vertically mode to the start of the interactive resize
operation. It makes handling of MaximizeFull mode consistent, and it
kills one moveResize() call at the end of the interactive resize
operation, which is good because it makes simpler handling of resizing
aspect ratio aware windows on wayland.
However, in order to make resizing of aspect ratio aware windows good
for real, we will need to augment configure events with gravity info.
On Wayland, the move resize geometry and the frame geometry are
completely out of sync.
This change synchronizes emitting of the clientStepUserMovedResized
signal to the move resize geometry changes.
It simplifies code of InternalClient and XdgSurfaceClient, and makes
adding support for other shell surface protocols easier as there's less
boilerplate stuff that you would need to take care of.
With internal clients and xdg-shell clients, geometry updates occur in
asynchronous fashion when interactively resizing the window.
As is, performInteractiveMoveResize() will call resize() if the move
resize geometry is different from the current frame geometry. This can
result in kwin sending excessive configure events.
With this change, kwin will send less configure events during
interactive resize.
It's not practical, regular users don't care about window geometry. One
could argue that it can be useful for creating window rules, but window
rules kcm pulls relevant properties from kwin.
If needed, one can reimplement this feature as a QtQuick script that creates
an overlay window positioned above the window that is being interactively
moved or resized.
Instead of only allowing the current format, send the default tranches modified
to only contain formats and modifiers suitable for scanout.
In order to not fail when we can't do direct scanout with a given format
(because that may require a modeset, which we don't allow), keep a blacklist
of attempted formats and modifiers for the current client.
The fixed size of 1080p makes windows change their size and place. To
prevent that from happening, make the placeholder screen the same size
as the last disconnected screen.
This is not a bullet proof solution, only a fast one. Ideally KWin
should remember the window layout on a given monitor setup and restore
it when reconnected.
BUG: 447419
FIXED-IN: 5.24
This makes the Scene less overloaded and it's needed for things such as
render layers.
In hindsight, it would be great to merge checkGraphicsReset() and
beginFrame(), e.g. make beginFrame() return the status like in QRhi or
VkSwapchain. If it's OUT_OF_DATE or something, reinitialize the
compositor.
Same as real hardware wl_keyboard, key should be sent before modifier
change. For example, Left Ctrl press and release should produce
key events in the order of Control_L and Control+Control_L.
When creating the texture containing the window decorations, the drawing
code now directly handles the rotation for the left and right
decoration, instead of rotating the image after it has been drawn.
The padding, to prevent texture bleeding, is now a fixed value instead
of being scaled. With this change, there are no longer visual artifacts
for window decorations with rounded corners, when the scaling value is
fractional.
On X11, if buffer age is unsupported, kwin can do some quirks like
copying parts of the front buffer to back buffer to avoid repainting the
whole screen.
Currently, the copying is performed in the opengl scene, which is not
perfect because it makes the scene responsible not only for painting the
scene but also some low level platform specific shenanigans.
This change moves the copying step to the glx and egl backends. It
simplifies the opengl scene, makes it less overloaded and more open to
changes, but it also duplicates code, which is not ideal. However, given
the de-facto deprecated state of the X11 platform, it's sort of acceptable
as the main focus is now on wayland session and the things that are
needed to make it fly as expected.
Usually, a client will only use text input v2/v3. Do not return the focused
surface for text input if it has no relevant text input resource.
If text-input object is created after surface get the focus, send
enter to this text input object. Ensure sendEnter and sendLeave always
appear in pair.
Also, use the same technique in text-input-v2 for text-input-v3 to
handle per resource's enable/disable state, and only send update to
enabled text-input-v3 object.
It can help clients predict how KWin will react. Sometimes, the noise of
seeing a virtual keyboard pop up is reason enough not to focus an input
field.
Observed in kdevelop, that isEnabled() could be false when switching
between different tabs with Ctrl+Tab. But Qt may still call show()
if you click on the texteditor widget. This leads to isEnabled == false but
setActive(true) is called. This causes kdevelop in a usable state because
keyboard grab will be created and no key event will reach application
because isEnabled == false. Under normal circumstances, key will reach
widget first and triggers another text_input_v2 enable to make input
method work properly.
text-input-v3 does not have preedit styling, instead, it can only
specify the range of cursor. Try to keep track of any
highlight/selection style range and combine them together. If it matches
the cursor position, use it as the cursor range.
Ctrl+Meta+D is already taken by the Minimize All script. "W" in Meta+W
stands for "window". Meta+O wasn't chosen because it's one of a
finger-stretcher.
BUG: 445800
This commit makes 10 bits per color channel the default color depth, which
should reduce banding on outputs that support color formats with more than
8 bits per color channel. In order to support this the commit also removes
the dependency of the EglGbmBackend on a specific format and EglConfig and
instead makes those per-Output properties.
Qt usually request InputMethod::hide() upon unfocus, but
InputMethod::show() is actually never called if focus transfer is done
by keyboard, which leads to a permanent disabled input method state.
It can be easily reproduced with a window with two text field, e.g.
QFileDialog, by pressing tab to switch the focused widget.
The semantics of hide/show should not deactivate the input method.
Instead, it should simply hide/show the input panel. Also it should not
be a hard request for input method to permanently hide the window. When
input method asked to show it again, the input panel window should be
shown.
zwp_input_method_v1 has some different semantics comparing to
text-input-v3. There is no way to indicate that "clear preedit" with
zwp_input_method_v1. In some client (Namely, Gtk), receiving an empty
preedit string will also trigger replace selection action. For example,
focus into address bar in firefox will automatically select the URL in
the address bar, and a following empty preedit string will clear the
selection which is not desirable.
To avoid such behavior, simply send an empty "done()" to clear text
input v3 preedit if preedit is empty.
This allows us to decouple effects more and reduce the number of random
odd build failures on freebsd. Besides that, it provides more fine
grained control over logging, for example, one could select log output
from some concrete effect, etc.
This may be problematic for certain client, e.g. firefox, and cause
input always reset after any key press. Also, sending reset on an
activate also does not match the text input v3 semantics.
zwp_input_method_v1 does not support generic double buffered event.
deleteSurroundingText need to be followed with done().
zwp_input_method_v1 preedit event order is preeditCursor,
preeditStyling, preeditString. To align it with text-input-v3 semantices,
send done() after receiving preedit_string() from input method.
Currently drag-and-drop doesn't work on FreeBSD because relevant input
parts of kwayland-server are not compiled there.
HAVE_LINUX_INPUT_H is set to 0 on FreeBSD because linux/input.h is in
/usr/local/include and check_include_file() doesn't look there.
Regardless of that, as FreeBSD developers pointed out, including
linux/input.h is the recommended way to get input event codes so let's
make it a hard dependency.
Currently, it's possible to have the case where the pointer input device
handler or the touch input device handler thinks that there's a focused
window, but the corresponding focused surface in wayland seat is unset,
because the pointer hovers the server side decoration.
If the server side decoration is destroyed, the input device handler will
fail to update wayland seat's focused surface.
In order to make pointer input device handler and touch input device
handler code more intuitive, this change makes focusUpdate() functions
ignore the decoration.
BUG: 411884
BUG: 440380
While finding this to be benficial when working on the activity
switcher I think it makes sense in general to keep focus on the
current client instead of potentially switching away.
KWin does not update activity status when setting `_KDE_NET_WM_ACTIVITIES`
to nullUuid outside of KWin, which causes "All Activities" not working
as expected for KWindowSystem.
`X11Client::activityList` is not kept in sync with
`AbstractClient::m_activityList`. Move `m_activityList` from private to
protected, and use it in `X11Client::readActivities`
BUG: 440496
They are used only by InternalClient. AbstractClient doesn't need to
handle the destruction of DecorationBridge because its lifetime matches
kwin's lifetime.
Currently, if a window switches between SSD and CSD, it is possible to
encounter a "corrupted" state where the server-side decoration is wrapped
around the window while it still has the client-side decoration.
The xdg-decoration protocol fixes this problem by saying that decoration
updates are bound to xdg_surface configure events.
At the moment, kwin sort of applies decoration updates immediately. With
this change, decoration updates will be done according to the spec.
If the compositor wants to create a decoration, it will send a configure
event and apply the decoration when the configure event is acked by the
client. In order to send the configure event with a good window geometry
size, kwin will create the decoration to query the border size but not
assign it to the client yet. As is, KDecoration api doesn't make
querying the border size ahead of time easy. The decoration plugin can
assign arbitrary border sizes to windows as it pleases it. We could change
that, but it effectively means starting KDecoration3 and setting existing
window deco ecosystem around kwin on fire the second time, that's off the
table.
If the compositor wants to remove the decoration, it will send a
configure event. When the configure event is acked and the surface is
committed, the window decoration will be destroyed.
Sync'ing decoration updates to configure events ensures that we cannot
end up with having both client-side and server-side decoration. It also
helps us to fix a bunch of geometry related issues caused by creating
and destroying the decoration without any surface buffer attached yet.
BUG: 445259
Many effects use the stacking order property of the effects handler in
their constructors. This means that windows should have compositing
setup by the time effects are loaded.
After changing how binary effect plugins are loaded, i.e. not queueing
loading effects, but loading them immediately, some effects broke
because the effects handler is created before windows setup compositing.
This change attempts to fix those effects by rearranging compositor
startup code so windows setup compositing first, then create the effects
pointer.
move() and resize() functions are not convenience helpers around the
moveResize() function. They communicate what kwin wants to see after the
corresponding change is applied. It's needed to make asynchronous
geometry updates work.
This change replaces a moveResize() during XdgToplevelClient
initialization with explicit move() and resize() function calls instead,
so it's more clear what the expected end result is.
A few plasma components cache QSGTexture. Those components rely on
texture references going away with QSGNode users. However, with the
current tear down logic, OffscreenQuickView won't destroy any paint
nodes.
Destroy QQuickRenderControl before QQuickWindow to ensure that are no
paint nodes left alive after OffscreenQuickView.
BUG: 444429
BUG: 444381
BUG: 444077
BUG: 444306
For all the task switchers on my system there is no KCM installed:
```bash
rg 'X-KDE-ParentComponents=(PlasmaXLight|org.kde.breeze.desktop|org.kde.breezedark.desktop|org.kde.breezetwilight.desktop|org.kde.breeze.desktop|org.kde.breezedark.desktop|org.kde.breezetwilight.desktop|org.kde.plasma.mycroft.bigscreen|small_icons|big_icons|compact|text|present_windows|thumbnail_grid|thumbnails|informative)'
```
As the docs state, this is only for buildin effects. Which means it is internal API.
Also I consider the choice of displaying a KCM *or* the preview odd, IMHO the preview
is the most important part.
I stumbled upon this when reviewing the metadata files as part of the preparation
for https://phabricator.kde.org/T14564.
Also this way of plugin loading is discouraged for performance reasons, because all the
plugins from the namespace have to be reopened to get their metadata.
Use standard easing curves in animations. OutCubic for the intro
animation and the InCubic for the outro animation.
Hidden opacity options were removed because I don't think they are
needed anymore. I made the starting opacity 0.4 to make the animation
look closer to what it would have been with an ease-out curve without
realizing it.
The output management test checks the implementation of output
management capabilities in the virtual backend, which is not helpful.
This change replaces it with a more useful test that verifies how
windows are placed after an output change.
Currently, if you move the cursor really fast between two outputs, there
may be stuck cursor on the previous output.
We need to query the old cursor visibility status before updating the
cursor position, otherwise the drm backend may not schedule an update to
move the cursor offscreen.
It's fine to have the animation duration hardcoded to 250ms. The main
issue with reading kscreen effect's config is that it adds inter-effect
dependencies, which is simply not worth the trouble.
The intro and the outro animations are very short and they usually
affect all windows on the screen. Windows have to travel a lot and in
very short time, this doesn't look.
Similar to other windows, this change makes the overview effect use the
out cubic curve for window movements (even though the HIG suggests us
using the InOutCubic easing curve). That way, user will look at
flatter parts of the easing curve more, i.e. the windows would move less
chaotically and simply jump to their target position.
Similar to the WindowHeap, this change makes the overview effect use the
out cubic everywhere else so the intro and the outro animations look
coherent.
Another advantage of the OutCubic easing curve is that it makes the
overview effect look more responsive and subtle.
Currently, the wayland server updates the server side decoration mode,
which is counter-intuitive, because it doesn't cache the last preferred mode.
With ServerSideDecorationInterface::preferredMode(), it can be simpler.
This commit does away with the special handling of the legacy cursor and
makes it be applied directly in DrmPipeline, using the same state as the
atomic cursor and without dirty flags.
Effect loading is already tested using integration tests, for example
the maximize test verifies that the maximize effect is loaded _and_ it
actually does something useful when a window is maximized or restored,
testScriptedEffectLoader only verifies that the effect is loaded, which
is less helpful than what integration tests provide us.
But perhaps the main problem with these tests is that they require us
building a mockverse around them. This litters code with ifdef
preprocessor directives and makes changing such code a living nightmare.
Another problem with these two tests is that they cannot use OpenGL
because it means mocking OpenGL, which we obviously not going to do.
With integration tests, it's not a problem.
The bottom line is that unit tests can be useful but they make life
notoriously difficult when it comes to testing components that depend on
other components.
The cursor being set out-of-band with atomic commits creates problems
because it can create false positive for atomic tests, if the cursor
state gets changed in between an atomic test and its matching commit.
This commit also ports the cursor to a swapchain instead of only one
image. This is not strictly required but may prevent artifacts and
will be needed for future optimisations.
Context properties don't work with QML effects. At the moment, no effect
needs to access the options object, but it makes the QML API consistent.
The workspace is already a singleton type.
The natural geometry can live in a different coordinate space than the
target area. Remove the premature optimization so the cell is properly
placed if the two are in different coordinate spaces.
Currently, the ExpoLayout wants the natural geometry to be in the local
coordinate space because of the default layout mode.
With the natural layout, the ExpoLayout will run a simple loop that
repels overlapping cells.
Once no two items overlap, the items will be scaled down based on their
bounding rectangle and the target area.
The problem is that the ExpoLayout includes the area where items will be
eventually placed when computing the bounding rectangle, which can
result in a sort of a bug where almost all windows are shifted to one
side of the screen, which is not at 0,0.
This change removes the target area from the bounding rect math so the
coordinate space where natural geometry is specified is irrelevant.
It fixes the issue where windows can be shifted to one side of the
screen after adding or removing a window. It also makes the ExpoLayout
API more simpler on the QML side and ensures that no relayouting will be
performed if only the position of the WindowHeap changes.
If the decoration is destroyed before the window is mapped, kwin can
respond with a configure event that has 0x0 size. New tests check that
problematic case.
BUG: 444962
Kwin announces a format with alpha when Dma-Bufs are available, even
when the texture doesn't contain any. This results in clients segfault
when trying to access the buffer assuming a maxsize wrt. the announced
format by ways of dimensions and bpp.
This patch moves the format masking to affect the Dma-Buf transport
only.
