Swipe with three fingers
- left to switch to the previous virtual desktop
- right to switch to the next virtual desktop
- up and down to toggle the overview
CCBUG: 439925
The .clang-format file is based on the one in ECM except the following
style options:
- AlwaysBreakBeforeMultilineStrings
- BinPackArguments
- BinPackParameters
- ColumnLimit
- BreakBeforeBraces
- KeepEmptyLinesAtTheStartOfBlocks
The anonymous variant of qmlRegisterType() is deprecated in Qt5 and
gone in Qt6.
This however now requires us to specify a module URI and major version
number. I used the names and (lowest) versions used already for other
types nearby where available, and fell back to "org.kde.kwin" and 0
otherwise.
In conjunction with a buffer format with alpha channel this allows
to have KWin's backdrop transparent to see through to a display
layer below.
Signed-off-by: Eike Hein <eike.hein@mbition.io>
The tablet mode code checks whether we are currently in tablet mode
based on whether or not we have a touch screen and a pointer. For some
devices, a touch screen or pointer device may be detected but we would
like to ignore it, since it incorrectly influences the tablet mode.
This reads the udev tag "kwin_ignore_tabletmode" from libinput devices
and will skip devices with that tag when trying to determine whether we
are in tablet mode or not.
ScreenLockerWatcher was written whislt overthinking DBus.
An interface does not have to have the same lifespan as the service the
other end. DBus connections works in terms of established "match rules",
these can be set up before a service is created the other side and they
remain if a service closes. The only part that needs doing is re-fetch
any cached properties.
There's also need to check the intial service names at startup. We can
just let our call to GetActive fail. It's far faster.
This class was getting convoluted in both ifdefs and Qt6 porting all to
solve something that isn't real.
There should be no behavioural differences.
It was added to work around Xwayland crashing at startup due to a mesa
issue, see commit 58fa92e40b.
It's been almost 6 years since that change. No other major wayland
compositor forces EGL_PLATFORM, so lets remove the workaround.
The main motivation behind this change is to get rid of code that's not
straightforward and should be unnecessary in general.
These are two conceptually different tasks that were intertwined.
On it's own it doesn't accomplish anything but is an important refactor
for longer term goals, namely:
- moving xwayland into kwin_wayland_wrapper with our wayland restart
handling support
- having multiple X connections
Behaviour should be the same.
support realtime activation for screenedges gestures, making it possible
for effects to show half-triggered states while dragging from
the edge with a finger, making them much more usable
In 52bc46069e, some code was shuffled
around to improve code readability. However, it was overlooked that
spa_meta_bitmap->offset is initialized too late, after QImage dest is
constructed. That's the reason why the left edge of the cursor is
wrapped around horizontally.
This change fixes the cursor glitch by ensuring that
spa_meta_bitmap->offset is initialized to proper value before getting
pointer to bitmap data. While on this, this change also moves
spa_meta_bitmap initialization code around to make spa_meta_bitmap setup
look less like a bowl of spaghetti, i.e. spa_meta_bitmap is initialized
first, and QImage dest is created with spa_meta_bitmap's values.
Virtual machines aren't properly supporting atomic mode setting yet, which
causes the cursor to be offset, and will cause more issues with overlay
planes. In order to prevent that from impacting users, fall back to legacy,
unless KWIN_DRM_NO_AMS is set.
BUG: 427060
FIXED-IN: 5.24.4
Some effects (AnimationEffect) transform windows without setting
PAINT_SCREEN_WITH_TRANSFORMED_WINDOWS flag. Make the scene disable
render optimizations if that's the case.
Whether AnimationEffect does a right thing is up to debate.
Window painting is no longer split in two phases - PAINT_WINDOW_OPAQUE
and PAINT_WINDOW_TRANSLUCENT.
PAINT_WINDOW_TRANSLUCENT is used as a hint to the occlusion culling
logic to ignore the opaque region.
Given that, the handling of the opaque region can be simplified. If no
effect sets the PAINT_WINDOW_TRANSLUCENT flag, then the opaque region
can be used as is.
It's not possible to get the surface damage before calling
Scene::paint(), which is a big problem because it blocks proper surface
damage and buffer damage calculation when walking render layer tree.
This change reworks the scene compositing stages to allow getting the
next surface damage before calling Scene::paint().
The main challenge is that the effects can expand the surface damage. We
have to call prePaintWindow() and prePaintScreen() before actually
starting painting. However, prePaintWindow() is called after starting
rendering.
This change makes Scene call prePaintWindow() and prePaintScreen() so
it's possible to know the surface damage beforehand. Unfortunately, it's
also a breaking change. Some fullscreen effects will have to adapt to
the new Scene paint order. Paint hooks will be invoked in the following
order:
* prePaintScreen() once per frame
* prePaintWindow() once per frame
* paintScreen() can be called multiple times
* paintWindow() can be called as many times as paintScreen()
* postPaintWindow() once per frame
* postPaintScreen() once per frame
After walking the render layer tree, the Compositor will poke the render
backend for the back buffer repair region and combine it with the
surface damage to get the buffer damage, which can be passed to the
render backend (in order to optimize performance with tiled gpus) and
Scene::paint(), which will determine what parts of the scene have to
repainted based on the buffer damage.
They still aren't realtime animated, but by making them respond to the
realtimeGesture() call, they can use callbacks to determine if they should be shown
or not. This allows you to swipe up, have it trigger, then swipe down in the same
motion and get it to untrigger without ever having to release.
Fixed a bunch of bugs and polished the slide effect.
Plugged the slide effect into the new VirtualDesktopManager interface desktopChanging() to allow for mac os style desktop switching.
BUG: 448419 BUG: 401479
Hard to avoid as long as we don't have CI coverage yet, but that will take
a bit more time, we need KWin (and all its dependencies) to fully build
first.
The raspberry pi exposes opaque formats for the cursor plane, and interprets
them as being opaque as well... Considering that we effectively don't support
anything else with the QPainter anyways, just hardcode ARGB8888 until we paint
the cursor with OpenGl.
This reverts commit ca7fc44814.
Reverting work with no explanation is unacceptable, especially when
you've already been asked to stop multiple times.
CWG has already been contacted regarding this conduct, which is
starting to seem like vandalism of KDE's codebase. I am CCing sysadmins
and officially recommending an emergency recovation of commit access
for uhhadd@gmail.com to prevent further abusive behavior.
CCMAIL: uhhadd@gmail.com
CCMAIL: sysadmin@kde.org
This reverts commit 154528cdef.
This commit was reverted with no explanation, context, or discussion. In
the future, please discuss things like this before doing them. KWin is a
community project, not a personal playground.
CCMAIL: uhhadd@gmail.com
KColorScheme::createApplicationPalette is quite expensive and DecorationPalette::palette is called quite a lot
Cache the result and only update when needed
This fixes a bug introduced in https://invent.kde.org/plasma/kwin/-/merge_requests/2045 where it would no longer check if it should redraw the whole region unless the data clip intersected. This would lead to flickering in certain cases
BUG: 421135
Allows removing some CMake checks config-kwin.h contents. This is
supported by all compilers and required for C++17. While touching those
lines I also cleaned up an unnecessary HAVE_UNISTD_H check (glibc always
has it and and incorrect use of HAVE_SYS_PROCCTL_H.
fbdev has been deprecated and unmaintained for a while. With Linux 5.14
including SimpleDRM driver, we can drop it. (at the time of writing this
commit message, the latest Linux version is 5.16).
[1/6] Make autotests create fake input devices
The goal of this patch set is simulating user input in unit tests via
InputDevices and no longer use the Platform to fake input. This matches
more closely with how input is processed when running a full plasma
wayland session, i.e. with the DRM and libinput backends.
This line had several problems:
1. Using un-namespaced `units` properties
2. Using `width` in a Layout
3. Using largeSpacing instead of gridUnit for indentation
All are fixed with ths commit.
The QStringView::to[Number]() methods in Qt5 cause one extra allocation
compared to the QStringRef counter-part. As long as we aren't on a hot
path this is probably not worth the extra #ifdef though.
when an aurorae theme does not contain "mask" element we can safely assume that blur is not supported. In such case all blur calculations must not run at all. This will make all solid aurorae themes much lighter by default.
kwin disables ptrace for a good reason - to prevent other processes from
attaching to kwin and snooping sensitive data or taking control of kwin.
But, that will also make things such as memory statistics unavailable to
read, etc.
On the other hand, the supported platforms where kwin runs all have
security measures in places to forbid shady processes ptrace'ing kwin.
For example, on Linux it's YAMA.
On Linux, by default, a process can ptrace only its descendants. For
example, this can be used by debuggers; otherwise you would need to be
the superuser to attach to any process.
This change drops our ptrace logic in favor of system provided security
measures. It allows the System Monitor to gather kwin's memory usage
statistics and also simplifies code, the current debugger detection
logic is not really robust.
If the system provided security measures are proven to be insufficient,
we can add the ptrace disabling logic back, but it would be great to
avoid that because system monitor won't be able to gather resource usage
statistics, which can be useful for detecting memory leaks in plasma
wayland session, etc.
when aurorae decorated windows become maximized and back to normal, after a while they all start to disable blur for their decorated maximized windows.
- bug was tracked down to aurorae fault sending empty QRegions for its maximized windows. What probably happens is that because mask FrameSvgItem enabled borders change from AllBorders to NoBorder, mask FrameSvgItem calculations can not catch up
- the new approach is lighter than the previous one and simpler as margins and enabledborders for mask framesvgitem are not changed and in the c++ side no QRegions calculations are needed at all for maximized windows
- in my system with the new code changing from normal window to maximized one feels a bit snapper
the target is called ConfigCore, the relevant cmake config is not.
notably KF5ConfigConfig.cmake is the present file, so look for the
correct name, otherwise the dependency isn't found
Qt6 insists on that. We can do this either by including the moc files,
or by including the corresponding headers in the header defining the
properties, the former seems cleaner when possible.
Having blurRegion to identify if a decoration supports blur or not instead of the metadata-json way has the following benefits:
- decorations can now provide both blur or not based on user preference
- theme engines such as Aurorae do not have to enforce blur or not to their themes and they can support blur enabled and disabled themes at the same time if they want to
- blurRegion is empty by default so the Korners bug will be fixed for all solid aurorae themes. Breeze and Oxygen have set **blur:false** so nothing changes for them.
- all aurorae themes that do not require blur will free up system resources by default
Maliit does client side animation by default but can be told to disable
them using an environment variable. Since we now want to do this
animation in KWin, always disable the client side animations in Maliit.
It feels slightly weird to unconditionally add a Maliit-specific
variable, but at the same time all other solutions are more error prone
and would likely need more code.
This adds support for animating showing/hiding of the input method panel
to the sliding popup effect, if the input panel is of type "Toplevel".
This is mainly intended to animate showing the virtual keyboard and has
been primarily tested with Maliit. It replaces the client-side animation
that Maliit would do, instead doing the animation on the KWin side which
provides a significantly smoother experience.
This makes it easier to cross-compile KWin since it is no longer necessary
to have all the KWin dependencies on the host machine. This could be
partially addressed by moving the strip-effects-metadata.cpp into a
separate folder than can be built as a top-level project, thereby reducing
the dependencies to just QtCore. However, it still means we have to build
a native binary. Since all this script is doing is removing some JSON keys,
we could also use a python script and avoid the need to compile a
build-time helper program.
Otherwise when we render it, we do so upside down and screen sharing
looks broken.
This only happens when the shadow buffer is in use, so it's not all that
common.
This is an approach for aurorae engine to publish masks for its decorated windows in order to avoid out of window blurring at the decoration corners. Aurorae themes are now able to specify a **mask** element inside **decoration.svg** file like plasma themes already do. Mask is used afterwards to calculate theme's blur region.
| Before | After |
| ------ | ----- |
|||
Adjusted Aurorae theme for testing: [ROUNDED-DARK.tar.gz](/uploads/082f60ad4311e3e296b7faeeb7c97dac/ROUNDED-DARK.tar.gz)
BUG:395725
Otherwise the connection isn't severed when the layer is destroyed,
leading to crashes when screen resolution changes.
We don't actually need `this` to access `workspace()`, and we have
a guarded `output` as sender in the other case.
Notifications are really only useful in a setting with a full
shell environment where there is a notification center to display them.
Signed-off-by: Victoria Fischer <victoria.fischer@mbition.io>
Currently, if the pointer surface has to change between two surfaces,
the compositor must do the following
seat->setFocusedPointerSurface(nullptr);
seat->notifyPointerMotion(newPos);
seat->setFocusedPointerSurface(focus);
The pointer motion is needed so the enter event has correct position,
setFocusedPointerSurface(nullptr) is needed to avoid sending a bad
motion event before the leave event.
This change makes the pointer focus api less error prone by splitting
setFocusedPointerSurface() in two functions - notifyPointerEnter() and
notifyPointerLeave().
notifyPointerEnter() takes new focus surface as well as the position
where the pointer has entered the surface so the focus update can be
atomic and without any corner cases.
notifyPointerLeave() is used to clear pointer focus.
This commit expands the QImage-to-GL formatTable to include entries
for RGBX64, RGBA64_Premultiplied, and Grayscale16 image formats.
Uploading 16-bit-per-channel formats is supported by OpenGL and, with
the GL_EXT_texture_norm16 extension, GLES.
This ensures that we get a warning if the config header is not included
instead of compiling the code as if it was disabled. Interestingly, some
checks already used #if KWIN_BUILD_*, so those were generating -Wundef
warnings when the feature is disabled. Commit 886173cab assumed that all
those features were already 01, so this unbreaks the build if any of the
features is disabled.
Fixes: 886173cab ("Reduce ifdefs in Workspace::supportInformation()")
We should use the output area as the margin size as where to position
rather than the panelSize.
This ensures that the keyboard ends up in the right place right above
the panels.
This reverts commit 3d0bdc56a4.
seat->setFocusedPointerSurface() before notifyPointerMotion() is needed
to prevent sending a motion event that's outside the previously focused
surface.
BUG: 449273
It is automatically called (and documented as such) by KCModule
after the constructor is run.
This avoids calling a virtual method from the constructor.
Signed-off-by: Eike Hein <eike.hein@mbition.io>
None of the features it adds ontop of `QComboBox` are used.
Allows to drop the dependency on KCompletion.
Signed-off-by: Eike Hein <eike.hein@mbition.io>
Instead of having the render backends manage layers, have DrmGpu and DrmPipeline
do it. This makes it possible to unify code paths for leased and normal
outputs, remove some redirection and have more freedom with assigning layers
to screens.
It's leftover after the times when widget style was using wayland
connection. Breeze had to destroy all wayland resources before
terminating the internal connection.
Currently, the blur effect will shrink an opaque region even if it
doesn't intersect m_currentBlur.
This ensures that the blur effect won't do a stupid thing such as
clipping the opaque region of the desktop window.
We already try to ensure that the surface damage is within render target
bounds. Avoid clipping surface damage in render backend, which is a bit
excessive task and perhaps it should be done an abstraction level above.
If the main surface is translucent (e.g. it contains only the drop
shadow) but its subsurface is opaque, the "window->isOpaque()" check
will produce a false positive.
It's not guaranteed that there will be current render target in
postPaintScreen() as all painting have been completed. paintScreen() is
a much safer place to pick color.
It's not guaranteed that there will be current render target in
postPaintScreen() as all painting have been completed. Furthermore,
even the docs of the postPaintScreen() function indicate that no
painting should be done there, you can do only cleanup things, e.g.
schedule a repaint, etc. paintScreen() is a much safer place to
capture screenshot.
When casting from integer to pointer, promoting the integer to (u)intptr_t
will ensure that the resulting type can be converted to a pointer without
problems. These two casts changed in this commit trigger a warning when
building for CHERI-enabled architectures such as Arm Morello. This is not
just limited to CHERI, the cast from xcb_pixmap_t (uint32_t) to void*
should also be flagged by -Wint-to-void-pointer-cast when using Clang,
however, it appears that warning only handles C-style casts, and not
reinterpret_cast (https://github.com/llvm/llvm-project/issues/53964).
Software cursor has always been a major source of problems. Hopefully,
porting it to RenderLayer will help us with that.
Note that the cursor layer is currently visible only when using software
cursor, however it will be changed once the Compositor can allocate
a real hardware cursor plane.
Currently, software cursor uses graphics-specific APIs (OpenGL and
QPainter) to paint itself. That will be changed in the future when
rendering parts are extracted from the Scene in a reusable helper.
At this point, it's safe to assume that only X11 has weird rendering
model, which stands in the way of making rendering abstractions nice and
intuitive, so let's check operation mode. If OperationModeX11 is
dropped, this will also simplify finding X11-specific code in kwin.
This is the first tiny step towards the layer-based compositing in kwin.
The RenderLayer represents a layer with some contents. The actual
contents is represented by the RenderLayerDelegate class.
Currently, the RenderLayer is just a simple class responsible for
geometry, and repaints, but it will grow in the future. For example,
render layers need to form a tree.
The next (missing) biggest component in the layer-based compositing are
output layers. When output layers are added, each render layer would
have an output layer assigned to it or have its output layer inherited
from the parent.
The render layer tree wouldn't be affected by changes to the output
layer tree so transition between software and hardware cursors can be
seamless.
The next big milestone will be to try to port some of existing kwin
functionality to the RenderLayer, e.g. software cursor or screen edges.
The responsibilities of the Scene must be reduced to painting only so we
can move forward with the layer-based compositing.
This change moves direct scanout logic from the opengl scene to the base
scene class and the compositor. It makes the opengl scene less
overloaded and allows to share direct scanout logic.
Consider the cases where we get a touch move or touch up but we never
received a touch down before.
In the case of move, we'll simulate a touchDown right there and move on
with reality.
In the case of touch up, we'll just ignore the event as simulating could
just be more confusing.
BUG: 450338
Xcursor loading code has hardcoded search paths, in order to take into
account distros installing app data in a different location,
libwayland-cursor sets the ICONDIR to the icon directory computed based
on the install prefix.
However, that won't work with gitlab CI because it relocates binaries. A
more robust way to find cursors would be to use QStandardPaths to find
all the icon directories on the system.
Another advantage of using own cursor loading code is that it allows us
to reuse cursor images that are symlinks. For example, with
breeze_cursors, almost half of the files in the cursors directory are
symlinks.
The main disadvantage of this approach is that we would have to keep the
search paths up to date. However, on the hand, there are not that many
of them, e.g. ~/.icons, ~/.local/share/icons, /usr/share/icons,
/usr/local/share/icons. The last three are implicitly handled by the
QStandardPaths.
It's specified as a Path in the kcfg file and the KCM will replace the
/home path into $HOME, and I imagine it may do some others likethat.
BUG: 450430
Rather than assuming the input panel to always be less than or equal to
the maximized area, ensure it is. This ensures that the input panel gets
placed correctly when there maximized area is smaller, like when there's
a panel on the side.
Additionally, don't skip the entire positioning code when "m_output" is
empty, to avoid the placement not happening when Kickoff is open.
Whilst global shortcuts are blocked by grabbing the keyboard, user set
up manual scripts can still invoke a global action.
Given we already have code to deactivate when locking it makes sense to
also prevent activation.
BUG: 450331
qApp is defined differently depending on whether QCoreApplication,
QGuiApplication, or QApplication is included.
Use QGuiApplication::instance() to improve code readability.
CCBUG: 450359
qApp is defined differently depending on whether QCoreApplication,
QGuiApplication, or QApplication is included.
Use QGuiApplication::instance() to improve code readability.
CCBUG: 450359
This really should not fail unless we did something seriously wrong
on our end, such as changing GL context during paintScreen.
If we add an invalid `GLSync` to the queue it can lead to very hard
to debug crashes in seemingly unrelated parts of the rendering
process, when the queue is drained, potentially seconds after the
actual failure that occurred here.
Signed-off-by: Eike Hein <eike.hein@mbition.io>
If a window appears on the screen, the highlight window effect will try
to fast-forward animation to the target state by setting the animation
duration to 0. However, TimeLine doesn't like that because it will
eventually lead to division by zero.
This change makes the highlight window effect fast-forward the
transition to highlight or ghost state by using the complete() function.
BUG: 450323
Allows to drop the direct dependency on KDeclarative only used
for `QmlObjectSharedEngine` outside of `KCModuleQML`
Signed-off-by: Eike Hein <eike.hein@mbition.io>
paintScreen() already tries to ensure that the damage region doesn't go
outside the scene geometry. With this change, it will try to clip the
damage region to the render target rect, which saves us an extra region
intersection and simplifies code that calls paintScreen().
Having a render loop in the Platform has always been awkward. Another
way to interpret the platform not supporting per screen rendering would
be that all outputs share the same render loop.
On X11, Scene::painted_screen is going to correspond to the primary
screen, we should not rely on this assumption though!
Neither SceneQPainter nor SceneOpenGL have to compute the projection
matrix by themselves. It can be done by the Scene when setting the
projection matrix. The main benefit behind this change is that it
reduces the amount of custom setup code around paintScreen(), which
makes us one step closer to getting rid of graphics-specific paint()
function and just calling paintScreen().
This allows us to make the GLRenderTarget a bit nicer when using it to
wrap the default fbo as we don't know what the color attachment texture
is besides its size.
This means that the responsibility of ensuring that the color attachment
outlives the fbo is now up to the caller. However, most of kwin code
has been written that way, so it's not an issue.
It's effectively unused and removing it allows us to get rid of
GLTexture field, which is very useful for abstracting the concept of a
"render target" across OpenGL and QPainter backends.
It's currently being used only by the X11 standalone backend. We should
either port the X11 backend to manual dirty state tracking or waiting
until it gets dropped. The main motivation for getting rid of the dirty
state tracking in the GLTexture is that it keeps kwin open for
alternative opengl wrappers, e.g. QOpenGL, and it simplifies GLTexture
code.
Because the GLRenderTarget and the GLVertexBuffer use the global
coordinate system, they are not ergonomic in render layers.
Assigning the device pixel ratio to GLRenderTarget and GLVertexBuffer is
an interesting api design choice too. Scaling is a window system
abstraction, which is absent in OpenGL or Vulkan. For example, it's not
possible to create an OpenGL texture with a scale factor of 2. It only
works with device pixels.
This change makes the GLRenderTarget and the GLVertexBuffer more
ergonomic for usages other than rendering the workspace by removing all
the global coordinate system and scaling stuff. That's the
responsibility of the users of those two classes.
In order to support layered rendering and tiled outputs KWin needs to be
able to split rendering of outputs into multiple surfaces. This commit
prepares the drm backend for that, by moving most of the code in EglGbmBackend
out to a EglGbmSurface class, which will later be used for overlay surfaces
and rendering to multiple connectors side by side.
In doing that, this commit also cleans up the code a bit, removes a lot of
now unnecessary multi-gpu stuff and potentially makes modesets a little
bit more efficient by re-using resources more often.
This allows to track per effect dependencies more precisely. The main
problem with a library and a comment next to it saying who needs it is
that the comment can get easily outdated.
/proc/%/exec always points to the canonical/real path of a binary,
the exec field of a .desktop might contain a symlink and therefore
differ from canonical path.
Explicitely canonicalizing the path in exec prevents this mismatch.
The first move() in X11Client::createDecoration() will alter the client
size, which will result in the subsequent resize() incorrectly resizing
to a smaller window size.
In order to fix that issue, this change makes X11Client adjust the
frame geometry atomically after creating or destroying window decoration.
BUG: 449988
If the window is initially maximized, there won't be any current
decoration when XdgToplevelClient changes the maximize mode, we need to
use m_nextDecoration.
BUG: 450053
With the xdg_toplevel.configure_bounds event, the compositor will be
able to indicate the client the maximum desired surface size.
It can be used to prevent mapping too big application windows, etc.
