Summary:
Such an option would be useful for people that are used to watch videos
in the fullscreen mode.
By default, we still dim fullscreen windows because watching videos in
fullscreen mode is not the only one use-case. One could have a text
editor in fullscreen mode on one screen and Konsole on another screen.
In that case, it would be desired to dim the text editor if the latter
is active. Also, because we don't have stats of how the fullscreen mode
is used by KDE Plasma users.
BUG: 399822
FIXED-IN: 5.15.0
Test Plan:
* Unchecked the "Fullscreen windows" checkbox;
* Opened Konsole;
* Opened Firefox in the fullscreen mode;
* Pressed Alt+Tab;
* (Firefox stayed bright)
Reviewers: #kwin, #plasma, davidedmundson
Reviewed By: #kwin, #plasma, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16216
Summary:
The Dim Inactive effect expects that the windowClosed signal always
proceeds the windowDeleted signal. But in some cases that's not the case.
If a window gets destroyed before becoming ready for painting, only
the windowDeleted signal will be emitted. In addition to that, KWin will
activate that window, which means we'll probably start a transition for
it.
Because this effect cannot terminate active transitions for such
windows, KWin can crash in postPaintScreen.
This change addresses the crash in postPaintScreen by adding extra clean
up stuff in the windowDeleted slot to make sure that there are no
transitions for deleted windows.
The proper fix would be to not emit windowActivated signal for windows
that are not ready for painting.
BUG: 399612
FIXED-IN: 5.14.1
Test Plan:
Ran
```
x <- seq(5, 15, length=1000)
y <- dnorm(x, mean=10, sd=3)
plot(x, y, type="l", lwd=1)
```
in RKWard multiple times.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16130
Summary:
In order to check whether a window is on some particular virtual
desktop, one has to use isOnDesktop.
Also, this change adds implicit support for the new virtual desktop protocol.
Test Plan:
Switched between virtual desktops with a Konsole window being on all
desktops.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16103
Summary:
If a window was moved to another virtual desktop, then it would be faded
in. The desired behavior is to not animate it at all.
Test Plan: Moved a Konsole window between virtual desktops, it stayed opaque.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D16102
Summary:
If a modal window is closed and some alternative effect that animates
the disappearing of windows is enabled(e.g. the Glide effect, or the
Scale effect), the Dialog Parent effect can cause flickering of the
parent window because its animation duration doesn't match duration of
those alternative effects.
Also, if the Fade effect, the Glide effect, and the Scale effect are
disabled, the Dialog Parent will keep the parent window alive for no
good reason.
This change addresses that problem by adding keepAlive property to
`animate` function so scripted effects have more control over lifetime
of animated windows.
If both a modal window and its parent window are closed at the same time
(and there is no effect that animates the disappearing of windows), the
Dialog Parent will stop immediately(because windowDeleted will be
emitted right after windowClosed signal).
If both a modal window and its parent window are closed at the same time
(and there is effect that animates the disappearing of windows), the
Dialog Parent won't reference the latter window. Thus, it won't cause
flickering. I.e. it will "passively" animate parent windows.
BUG: 355036
FIXED-IN: 5.15.0
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14919
Summary:
This lets other effects know whether they should inhibit or not which
reduces
visual glitches of overlapping animations.
BUG: 321201
FIXED-IN: 5.15.0
Test Plan: Switched desktops, they still faded
Reviewers: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15474
Summary:
If one wants to drag a maximized window while he or she has enabled both
the Wobbly Windows and the Maximize effect, visual artifacts can be
shown.
When the Maximize effect animates transition from maximize to restore,
some parts of the window can overshoot repaint regions(because of
wobbliness), leaving us with the visual artifacts.
To fix that, we have to take into account current scale and translation
when calculating dirty region in the Wobbly Windows effect.
BUG: 370612
FIXED-IN: 5.14.1
Test Plan: When dragging maximized windows, there are no visual artifacts anymore.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: abetts, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15961
Summary:
The Scale effect and the Glide effect have to animate only ordinary
windows(i.e. the ones that are considered to be apps).
On X11, in order to distinguish ordinary windows from combo box popups,
popup menus, and other popups, those effects check whether given window
is managed.
On Wayland, there is no concept of managed/unmanaged windows.
XDG Shell protocol defines 2 surface roles:
* xdg_toplevel;
* and, xdg_popup.
The former can be used to implement typical windows, the ones that can
be minimized, maximized, etc.
The latter can be used to implement tooltips, popup menus, etc. Thus,
that's a good criteria to filter popup windows.
CCBUG: 398100
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: #kwin, graesslin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15117
Summary:
If a window is being slided in and for some reason it gets closed, the
window will be slided out. The problem is that there is a jump between
the slide in animation and the slide out animation.
The reason for that is we cancel the slide in animation when the slide
out animation is started.
It makes sense to cancel previously active animations because they have
different durations. But visually, it doesn't look good.
TimeLine tries to preserve progress value when changing duration. Thus,
let's utilize that to fix the jump.
This change matters only with animation speed factor > 1.0.
CCBUG: 264276
Test Plan: Manually.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: abetts, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15626
Summary:
With the Oxygen cursor theme, a visual glitch can appear in the
bottom-left corner of the cursor when the screen is zoomed in.
The reason for that is we're using GL_REPEAT for GL_TEXTURE_WRAP_S
and GL_TEXTURE_WRAP_T. So, when the linear filter samples neighboring
texels in the bottom, it can sample some texels from the top (because of
GL_REPEAT).
To fix that, we have to set the wrap mode to GL_CLAMP_TO_EDGE.
BUG: 338254
FIXED-IN: 5.14.0
Test Plan:
Before:
{F6303912}
After:
{F6303913}
Tried other cursor themes(Breeze and Adwaita), everything looks okay.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15949
Summary:
This means that if one opens/closes a window whilst present windows (for
example) is active we don't have two effects meddling with the opacity.
Like glide and scale this disables if it's invoked during an active full
screen effect, but it does not cancel animations that are running when a
full screen effect is launched.
Test Plan:
Windows still fade normally as before
Ran sleep ; dolphin with present windows / cube
Present windows fades windows itself so it's hard to see any difference
But it's more technically correct
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: zzag, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15933
Summary:
The "Force" part in WindowForceBackgroundContrastRole and WindowForceBlurRole
is confusing. If WindowForceBlurRole is set on a window, background
behind it won't be blurred.
By setting WindowForceBlurRole we tell the Blur effect "that's fine to
do your business behind transformed windows."
The Slide effect only translates windows, it doesn't distort them, etc.
So, we can set WindowForceBackgroundContrastRole and WindowForceBlurRole
for all windows.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15707
Summary:
Full window repaints issued by the Sliding Popups effect can hide bugs in
other effects that animate the disappearing of windows (e.g. Scale).
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15822
Summary:
If isActive() returns false, neither paintScreen nor paintWindow nor
postPaintScreen will be called.
So, `if (m_active)` checks are redundant.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15708
Summary:
The Show Paint effect is useful when debugging repaint regions issued by
effects. The only headache with it is necessity to enable/disable it.
Consider the following workflow:
* Do some change to an effect;
* Compile KWin (or the effect);
* Go to System Settings and enable the Show Paint effect;
* Test effect, check repaint regions, etc;
* Disable the Show Paint effect;
* Go to the step 1.
This workflow is really exhausting. Also, when testing repaints in a
nested compositor, things become quite messy.
Because purpose of this effect is to debug repaints (and because this
effect is not meant for daily usage), I think that's fine to change
how it's activated.
This patch improves the workflow by changing the way how this effect
gets activated. Instead of enabling/disabling it, one can just use a shortcut
to activate or deactivate the effect.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: broulik, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15703
Summary: This is second part of {D15175}, and aimed at fixing Bug 390366.
The problem was that effect relied on isManaged() to detect OSDs and notifications, that should be painted on top of the cube. On Wayland, the desktop window itself is not managed, which made it "sticky".
Instead we use isSpecialWindow() check to explicitly make notifications and OSDs sticky.
It still requires fixing Plasma::Dialog, since it does not set isSpecialWindow() flag correctly.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15496
BUG: 390366
FIXED-IN: 5.15.0
Summary:
Bugs occurred because KWin was not very happy when windows were painted during CubeSlideEffect::paintScreen().
Another issue is that blur, although it was supposed to, did not work at all (haven't found appropriate bug on bugzilla).
As well as background contrast effect.
This patch does the following thing:
- Adopted WindowForceBlur / WindowForceBackgroundContrast logic from SlideEffect, instead of panels/stickyWindows QSets (those become useless anyway)
- Added shouldAnimate code, which determines whether a window should be animated with the cube (i.e. ordinary windows) or should stick (i.e. panels or pinned windows, if corresponding options are checked in the settings)
- It paints an additional non-transformed screen, on which it paints only "sticky" windows. This is done because otherwise KWin would apply blur not behind the OSD, but on the same place on moving cube face.
- (in addition) switched to new Qt5 connect syntax.
Reviewers: #kwin, zzag
Differential Revision: https://phabricator.kde.org/D15175
BUG: 361516
BUG: 362360
FIXED-IN: 5.15.0
Summary:
An opacity animation calls multiplyOpacity not setOpacity, therefore we
want to always fade between 0 and 1, not up to the window opacity.
Reviewers: #kwin, zzag
Reviewed By: #kwin, zzag
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15476
Summary:
The Track Mouse effect can be toggled either by pressing modifier keys
and moving mouse or by pressing a shortcut. It's not possible to use
the latter and then the former without changing config.
But there is one caveat, in order to use shortcut, you have to uncheck
all modifier keys. This seems to be not very intuitive.
In addition to that, the KCM allows to change shortcut even if there is
some checked modifier.
As the title says, this change makes possible to use both modifier keys
and shortcut to activate this effect without changing config.
KCM:
{F6237308, layout=center, size=full}
BUG: 398124
FIXED-IN: 5.14.0
Reviewers: #kwin, #plasma, #vdg, davidedmundson
Reviewed By: #kwin, #plasma, #vdg, davidedmundson
Subscribers: broulik, abetts, ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15272
Summary:
Summary of changes:
* Use QVector to store colors
* Add Q_OBJECT macro
* Port away from QRegion::rects
* Fix coding style
* Use default member initialization
* Use nullptr
* Reserve rects in paintXrender
The behavior of this effect haven't been changed, it still acts as before.
Test Plan: Compiles, and the Show Paint effect is still a psychedelic thing.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15424
Summary:
The desktop file parser supports only QString, QStringList, Int, Double,
and Bool. QUrl is not a supported type for some reason.
Thus, let's use QString for X-KWin-Video-Url.
Reviewers: #kwin, broulik
Reviewed By: broulik
Subscribers: Zren, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15373
Summary:
Modification of undeclared variables is illegal in the strict mode, e.g.
```lang=js
mainWindows = window.mainWindows();
```
is illegal.
Test Plan: The Dialog Parent effect works with both QScriptEngine and QJSEngine.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15413
Summary:
The x-coordinate of the area's left edge and y-coordinate of the area's
top edge are adjusted by 1px leading to a gap between the frame and
magnified area. Because area has type of QRect, we have to adjust only
coordinates of the right and bottom edge by 1 px.
Because QRectF::right() == QRectF::x() + QRectF::width(), we can use
QRectF, which leads to more cleaner code because we don't need to do 1px
adjustments.
Test Plan:
Before:
{F6235388, layout=center, size=full}
After:
{F6235439, layout=center, size=full}
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15275
Summary:
* effects.h includes client.h and forward declares Client, both at the
same time. Thus, delete the include;
* the blur effect includes effects.h. That, most likely, is a leftover
after 3f5bf65a9e.
Test Plan: Compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D15191
Summary:
While BuiltInEffects has effectData() function, many functions repeat
s_effectData.at(index(effect)), which is what effectData() is doing.
By using effectData(), we'll get rid of those repetitions and maybe make
easier transition to other underlying data structure that stores metadata
for builtin effects.
Test Plan: Compiles, all enabled builtin effects are loaded and working.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13587
(cherry picked from commit 7bfaa6e913)
Summary:
The Dim Inactive effect sees the world a little bit differently.
m_activeWindow is currently active window that can be dimmed later on.
In most cases, it's the same as effects->activeWindow(). In rare cases,
it can be nullptr, even when effects->activeWindow() is not equal to nullptr
(e.g. when active window is a context menu popup).
canDimWindow is a helper that returns true if a given window should be
dimmed, otherwise it returns false. It has one special case: if a given
window is equal to m_activeWindow, return false. I.e. don't dim active
windows.
Currently, if user changes config of this effect, active window becomes
dimmed.
The reason for that is we hit that special case when deciding whether
effects->activeWindow() should be m_activeWindow.
This change addresses that problem by resetting m_activeWindow so we
don't hit that special case.
Test Plan:
* Opened KCM of this effect;
* Changed strength;
* (the KCM window stayed bright after I clicked "Apply" button).
(everything else works as expected)
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14973
Summary:
The Dim Inactive effect was rewritten mostly to fix most of issues with
it, e.g. after leaving a full screen effect(e.g. Desktop Grid) windows
sometimes are not dimmed back, or when a window becomes inactive there
is no smooth transition, etc.
{F5956124}
//Before: the window is not smoothly dimmed.//
{F5956127}
//After: the window is smoothly dimmed.//
In combination with an effect that animates the disappearing of windows,
e.g. Glide, the rewritten Dim Inactive effect doesn't "flash" windows.
If an active window has been closed, it will stay bright. If an inactive
window has been closed, it will stay dimmed.
Among other changes, the KCM has been re-designed to follow common KCM
design in Plasma:
{F5956128, layout=center, size=full}
The way the rewritten Dim Inactive effect handles flashing/flickering problem can be
reused in the Dialog Parent effect.
### Demo
{F5959885}
//Before: dimming of a window group.//
{F5959886}
//After: Dimming of a window group.//
Depends on D13740
CCBUG: 359251
Test Plan:
Test plan #1
* Activated the Desktop Grid effect
* Dimmed windows smoothly brightened
* Left desktop grid
* Windows dimmed back
Test plan #2
* Opened Dolphin and its Preferences window
* Clicked on desktop, both Dolphin and the Preferences window dimmed
* Clicked on Dolphin, both windows smoothly brightened back
Reviewers: #kwin, #plasma, #vdg, davidedmundson
Reviewed By: #kwin, #plasma, #vdg, davidedmundson
Subscribers: davidedmundson, abetts, ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13720
Summary:
* Slightly improve readability;
* Check that offset and location have been passed;
* Sanitize slide in/out duration (if any of those is equal to 0, KWin
will crash).
Test Plan:
* Launched Yakuake;
* Pressed F12 several times (Yakuake still slides in/out).
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14862
Summary:
Comments like "// Call the next effect." are sort of
// Add 1 to foo.
foo += 1
they don't give any useful information and it would be better without
them.
Test Plan: Still compiles.
Reviewers: #kwin
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14728
Test Plan: Compiles and the Application Launcher is still sliding.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14823
Summary:
The existing Data struct has some serious problems:
(a) naming is not intuitive, SlideInterface uses more cleaner terminology
so let's use that (and because Wayland is the future);
(b) fadeInTime and fadeOutTime should be slideInDuration and slideOutDuration
respectively. The Sliding popups effect doesn't fade windows, it slides
them;
(c) mWindowsData should be m_animationsData because other parts of this
effect refer to it as "anim data"(e.g. setupAnimData).
This effect uses its own Location enum class instead of KWayland::
Server::SlideInterface::Location because it would be better to not
depend on platform specific data structures.
As a side effect, this change also fixes QHash abuse. The Sliding popups
effect is still hashing windows twice in prePaintWindow and paintWindow.
But I think that's acceptable because usually there would be only one
active sliding window.
CCBUG: 331118
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14301
Summary:
Slided popups are clipped twice:
* first, when filtering window quads in prePaintWindow;
* then, when doing scissor test (the opengl scene plugin does scissor
test for transformed windows).
Because of that, we don't need to filter window quads. Filtering window
quads only adds overhead.
This change simplifies code and "fixes" incorrect clipping when a slided
popup has shadows.
Test Plan:
* Put Plasma panel on the left screen edge;
* Open and close the Application Launcher.
(repeat for top/right/bottom screen edge)
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, graesslin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14450
Summary:
* Use new connect syntax
* Fix coding style
* Port to TimeLine
* Delete unused includes
* Use interpolate helper
* Drop WindowInfo class
Behavior of this effect hasn't been changed.
Test Plan: Opened/closed an "Open File" dialog, it still flies in/out.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, anthonyfieroni, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14685
Summary:
It's superseded by the new scale effect(D13461).
Existing users of this effect will be migrated to the new scale effect.
Depends on D13461
Reviewers: #kwin, #plasma, #vdg, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13462
Summary:
The new effect scales windows as they appear and disappear.
As the the most of window animation effects, it is a monolithic effect,
i.e., if you enable scale effect, it will animate *both* the appearing and
disappearing.
The main difference between the Scale effect and the Scale in effect is
that the Scale in effect only animates windows as they appear. There is
no corresponding "the Scale out" effect, which is odd. Other points that
differentiate the Scale effect from the Scale in effect:
* it is more subtle;
* it doesn't animate the log out screen;
* it doesn't conflict with the Fade effect, etc.
... and overall, the Scale effect supersedes the Scale in effect.
{F5904947}
//Window open animation.//
{F5904948}
//Window close animation.//
{F5905283, layout=center, size=full}
//KCM.//
Test Plan:
* Enabled this effect
* Opened/closed System Settings
Reviewers: #kwin, #plasma, #vdg, davidedmundson
Reviewed By: #kwin, #plasma, #vdg, davidedmundson
Subscribers: ngraham, davidedmundson, fvogt, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13461
Summary:
The Glide effect should not animate the Application Dashboard because
it's not an ordinary application or a dialog. Same applies to Kickoff,
panel popups, etc.
The most obvious solution would be to add "plasmashell plasmashell"
window class to the blacklist, but we still would like to animate some
of plasmashell's windows, for example, Empty Trash Bin confirmation
dialog (if the trash bin icon is on the desktop).
One could notice that the Empty Trash Bin confirmation dialog, Task
Manager Settings window, and other plasmashell's windows that we want
to animate have decorations. So, we can use that as a heuristic.
Test Plan: Opened/closed the Application Dashboard.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, abetts, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14367
Summary:
If a modal window is near some of screen edges, it will be distorted
in undesired way when it's being animated.
In order to keep perspective distortions invariant, no matter where
the modal window is on the screen, we have to move that modal window
to the origin, scale it, rotate it, translate it, apply perspective projection,
and then move it back.
Test Plan:
* Opened Kate
* Opened "Open File" dialog (during the in animation, it was distorted as expected)
* Closed that dialog (during the out animation, it was distorted as expected)
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14687
Summary:
If both the Glide effect and the Sheet effect are enabled,
they will conflict. Expected behavior would be:
* the Sheet effect animates only modal windows;
* the Glide effect animates the rest of normal windows.
In order to resolve the conflict, the Sheet effect has to grab
modal windows. Because it's quite specialized effect, we have
to ignore whether modal windows have been grabbed by the
Glide effect.
Test Plan:
* Enabled both the Glide effect and the Sheet effect;
* Opened Kate;
* Opened "Open file" dialog;
* Closed the dialog.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: abetts, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14560
Summary:
Currently, the fade effect animates both the appearing and the
disappearing of the logout screen. We don't want that because
the logout effect should do that.
D14582 addresses that problem by adding "ksmserver ksmserver" window
class to the blacklist of the fade effect. With that change, only the
logout effect animates the appearing of the logout screen. But there is
a problem... If user clicks the cancel button, the logout screen
instantaneously disappears, instead of smoothly fading out.
This change addresses that problem by adding "out" animation.
Depends on D14582
Test Plan:
{F6175011}
//Now, only the logout effect animates the appearing and the disappearing of the logout screen.//
{F6175013}
//No smooth transitions when the logout effect is disabled.//
Reviewers: #kwin, #plasma, #vdg, davidedmundson
Reviewed By: #kwin, #plasma, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14592
Summary:
The appearing of the logout screen is animated by both the Fade effect
and the Logout effect. The former should not animate the logout screen
because that's the job of the latter.
Test Plan:
Clicked the shut down button, the log out screen smoothly faded in.
Clicked the cancel button, the log out screen instantaneously disappeared.
Reviewers: #kwin, #plasma, davidedmundson
Reviewed By: #kwin, #plasma, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14582
Summary:
This change doesn't add new features or bugfixes, it only makes code
look uniform.
Test Plan: Still compiles.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14608
Summary:
The Fall Apart effect and the Sheet effect look like "candies" so
let's move them to corresponding category.
Test Plan: {F6167489, layout=center, size=full}
Reviewers: #kwin, #plasma, #vdg, ngraham, davidedmundson
Reviewed By: #kwin, #plasma, #vdg, ngraham, davidedmundson
Subscribers: ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14517
Summary:
We have two exclusive categories in the Appearance category:
minimize-animations and show-desktop. But it's hard to draw a line
between them, i.e. one can't say whether given effect belongs to the
minimize-animations category or to the show-desktop category.
This change moves show desktop effects to their own category so we have only
one exclusive category in the Appearance category.
Before:
{F6160592, layout=center, size=full}
After:
{F6161173, layout=center, size=full}
Reviewers: #kwin, #plasma, #vdg, ngraham
Reviewed By: #vdg, ngraham
Subscribers: davidedmundson, graesslin, ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14458
Summary:
That's not really "clear" what's going on with opacity values. Use
interpolate helper to improve a little bit readability.
Test Plan: Minimized/uniminized System Settings, still works as expected.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14553
Summary:
Don't cast translation values from double to int because it makes
animation a little bit choppy.
It makes significant difference only when animation speed is set to
"Very slow".
Test Plan:
- Go to 'System Settins > Display and Monitor > Compositor';
- Set animation speed to "Very slow"(it scales animation durations by 20x);
- Minimize/uniminimize System Settings.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14552
Summary:
The Wobby Windows effect is more a "candy" rather than a standard effect,
so it makes more sense to move it to the Candy category.
Test Plan:
Opened the Desktop Effects KCM, the Wobby Windows effect is in the Candy
category:
{F6160383, layout=center, size=full}
Reviewers: #kwin, #plasma, #vdg, ngraham, broulik
Reviewed By: #plasma, #vdg, ngraham, broulik
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14455
Summary:
Having these two enabled doesn't make sense. Also, Window Aperture + eye
On Screen looks really weird.
Test Plan:
Opened the Desktop Effects KCM, both the Window Aperture effect and the
eye On Screen effect are in an exclusive category:
{F6160394, layout=center, size=full}
Reviewers: #kwin, #plasma, #vdg, davidedmundson, ngraham
Reviewed By: #kwin, #plasma, #vdg, davidedmundson, ngraham
Subscribers: ngraham, davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14456
Summary:
There are several reasons why I "re-wrote" the Glide effect:
* it doesn't work correctly because it suffers from undesired perspective distortions: {F5914378}
The worst part is that windows are distorted so much on multiple monitor setups that it's hard to say whether that's glide animation.
* window close animation is not quite intuitive: if the close button is
located at the top and I click it, I would expect that window is
rotated around the bottom edge, not the top; (IMHO)
* it's too much distracting when working on something for quite good
amount of time: e.g. when editing photos, which involves a big number
of different dialogs;
* there are issues with deletion of QTimeLine;
* windows are not gracefully released if some other effect grabs them;
* its code doesn't follow common coding style in KWin.
So, the "new" Glide effect is more subtle, it's possible to have
different rotation edges for window open/close animations, it doesn't
animate special windows(like audio volume feedback), the code is simpler
and readable. Yet, there are some issues with QTimeLine, which are
common to all effects in KWin anyway.
### Demos
{F5889803}
//Window Open Animation//
{F5889804}
//Window Close Animation//
{F5889805, layout=center, size=full}
//KCM//
CCBUG: 394245
Test Plan:
* Enabled the Glide effect
* Closed System Settings
* Opened it again
Reviewers: #kwin, #plasma, #vdg, davidedmundson
Reviewed By: #kwin, #plasma, #vdg, davidedmundson
Subscribers: ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13338
Summary:
Kdelibs coding style states the following about whitespace placement:
> For pointers or references, use a single space before '*' or '&', but not after
Source: https://community.kde.org/Policies/Kdelibs_Coding_Style#Whitespace
Also, putting a whitespace after ! is not common in KWin.
Test Plan: Switched between virtual desktops.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14260
Summary:
When the Sheet effect was written, isModal worked only for Client
windows, not Deleted windows:
bool EffectWindowImpl::isModal() const
{
if( Client* c = dynamic_cast< Client* >( toplevel ))
return c->isModal();
return false;
}
so the Sheet effect had to track windows by using WindowInfo class, e.g.
class WindowInfo
{
public:
bool deleted;
bool added;
bool closed;
};
the biggest drawback of that method is that WindowInfo for each modal kept around
as long as those modals existed. It also was adding little overhead, e.g.
void SheetEffect::paintWindow( EffectWindow* w, int mask, QRegion region, WindowPaintData& data )
{
if( windows.contains( w ) && ( windows[ w ].added || windows[ w ].closed ) )
Things changed with a8160b3c31afa1db24084147ad4ce50cf3c0314a. With that
commit, WindowInfo kept only for modals that are currently being
animated, but isModal still worked only with Client windows, so
IsSheetWindow hack had been introduced.
Long story short: we don't need IsSheetWindow hack anymore because
isModal now works with Deleted windows.
Test Plan: Pressed Ctrl+O in Kate.
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14246
Summary:
The maximum size of `newQuads` is known in advance, so we can avoid
unnecessary reallocations when adding transformed window quads to
`newQuads`.
Test Plan: Minimized/unminimized System Settings.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14117
Summary:
If the Desktop Grid effect doesn't use the Present Windows effect to
layout windows, windowAt helper can return a window that doesn't belong
to current activity because it doesn't check whether that window belongs
to current activity.
This change addresses that problem by adding corresponding check.
BUG: 301447
FIXED-IN: 5.13.4
Test Plan:
//Unchecked "Use Present Windows effect to layout the windows".//
* Switched to activity #1
* Switched to virtual desktop #1
* Launched Konsole and maximized it(to increate hit area)
* Switched to activity #2
* Switched to virtual desktop #2
* Launched Dolphin and maximized it
* Activated the Desktop Grid effect, clicked on virtual desktop #1 (activity #2 is still active)
* Switched to activity #1
* Activated the Desktop Grid effect, clicked on virtual desktop #2 (activity #1 is still active)
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D14046
Summary: That's mostly to analyze what options people use in bug reports.
Test Plan:
* Enabled the Slide effect
* Ran `qdbus org.kde.KWin /KWin supportInformation`
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: davidedmundson, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13843
Summary:
In addition to porting to TimeLine, this change also fixes quadratic
scaling of animation durations:
```lang=cpp
animData.fadeInDuration = animationTime(mFadeInTime);
animData.fadeOutDuration = animationTime(mFadeOutTime);
```
where
```lang=cpp
mFadeInTime = animationTime(...);
mFadeOutTime = animationTime(...);
```
Depends on D13740
Test Plan: Opened/closed Kickoff.
Reviewers: #kwin, mart
Reviewed By: #kwin, mart
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13801
Summary:
Currently, type of the rotationDuration is std::chrono::milliseconds.
std::chrono::milliseconds is an unregistered datatype so we can't really
use it with Q_PROPERTY.
Test Plan: Ran `qdbus org.kde.KWin /KWin supportInformation`.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13839
Summary:
D9638 made docks to slide to "fix" the problem when switching to a
virtual desktop that has a window in full screen mode:
{F5615542}
As it turns out, people don't like this kind of behaviour. Another
problem with sliding of docks is that pager goes away.
This change disables sliding of docks by default. One can enable sliding
of docks by checking "Slide docks" checkbox in slide effect KCM.
Yet, transition to/from virtual desktop with a window in full screen
mode doesn't look great but that's somewhat acceptable:
{F5915681}
//(we don't see issues that are present in the video above because the new slide effect elevates docks if sliding of docks is disabled)//
Test Plan: Switched between virtual desktops, the default panel didn't slide.
Reviewers: #kwin, #plasma, #vdg, ngraham, graesslin
Reviewed By: #kwin, #plasma, #vdg, ngraham, graesslin
Subscribers: ngraham, graesslin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13566
Summary:
Currently, effects like Maximize, Slide Back have problems with setting
WindowForceBlurRole. They store previous state of WindowForceBlurRole.
This is wrong. Instead they should either ignore previous state of
WindowForceBlur or refcount forced role.
There's no need for refcounting right now. For example, if several effects
force blur or background contrast, they are most likely in a conflict.
Please notice that the Desktop Grid effect uses the Present Windows
effect only to calculate transformations.
Some other problems with the code that sets WindowForceBlurRole:
* Maximize effect stores previous state of WindowForceBlurRole only
for one window. It ignores the fact that there could be several
active maximize animations;
* Desktop Grid/Present Windows/Slide back don't clean after themselves.
So, after using those effects for good amount of times, memory usage
will bump.
Test Plan:
* Enabled blur for Konsole
* Maximized Konsole
* Activated Present Windows
* Activated Desktop Grid
* Raised another window(to trigger Slide Back)
Reviewers: #kwin, fredrik
Reviewed By: fredrik
Subscribers: fredrik, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13479
Summary:
Some people may not like the sliding of desktop background. Add
corresponding option to disable the sliding of desktop background.
By disabling the sliding of desktop background and docks, one can
get old slide effect.
{F5912713, layout=center, size=full}
Test Plan:
* Unchecked "Slide desktop background" checkbox, switched desktop;
* Checked "Slide desktop background" checkbox, switched desktop.
Reviewers: #kwin, #plasma, #vdg, mart
Reviewed By: #kwin, #plasma, #vdg, mart
Subscribers: romangg, abetts, ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13542
Summary:
On wayland blur on secondary monitor would not render correctly.
BUG: 393723
Depends on D12452
Test Plan:
- use more than one output
- log in in a wayland session
- open a transparent window (for example: Konsole with transparent and blur enabled profile)
- drag the window to another screen
- blurs the content under the window corretly
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: apol, zzag, davidedmundson, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12678
Summary:
In D12678 blur was changed to use `blitFromFramebuffer()` instead of `glCopyTexSubImage2D()`
Now it checks if the GPU supports it.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13246
Summary:
Blur should now work on Wayland when scaling is used.
This does not affect X11 as `GLRenderTarget::virtualScreenScale()` is always 1 on X11
BUG: 391387
Depends on D12678
Test Plan:
- log in in a Wayland session
- turn display scaling to 2x
- open a transparent window (for example: Konsole with transparent and blur enabled profile)
- blurs the content under the window corretly
Reviewers: davidedmundson, #kwin
Reviewed By: davidedmundson, #kwin
Subscribers: romangg, apol, zzag, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12700
Summary:
While BuiltInEffects has effectData() function, many functions repeat
s_effectData.at(index(effect)), which is what effectData() is doing.
By using effectData(), we'll get rid of those repetitions and maybe make
easier transition to other underlying data structure that stores metadata
for builtin effects.
Test Plan: Compiles, all enabled builtin effects are loaded and working.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13587
Summary:
* Drop abstract BlurShader class
* Delete evil "using namespace KWin"
* Fix includes
* Use smart pointers
* Turn BlurShader into a QObject
* Fix coding style
* Add missing default cases
* Use default member initialization
* Delete methods that are used only once
* Use more const
* Use QRect::{top,right,bottom,left} methods in the setBlurRect method
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13110
Summary:
Window parts disappear very rapidly, it feels not really pleasant.
Animate also opacity so window parts disappear over time. This
makes fall apart animation more pleasant.
### Before
{F5912359}
### After
{F5912360}
Test Plan:
* Enabled fall apart effect
* Closed System Settings
Reviewers: #kwin, #plasma, #vdg, davidedmundson
Reviewed By: #kwin, #plasma, #vdg, davidedmundson
Subscribers: ngraham, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13528
Summary:
The Fall Apart effect doesn't grab windows so a conflict could happen
if an alternative window open/close animation effect is enabled(e.g.
Fade, Glide).
### Before
{F5912324}
//Fall apart and Fade conflict with each other.//
### After
{F5912325}
//Only Fall apart animates the disappearing of System Settings.//
Test Plan:
* Enabled fall apart effect and fade effect
* Closed a window
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13527
Summary:
HBoxLayout was a bad choice for label-spinbox pairs. Use appropriate
layout(FormLayout) for such things.
Test Plan: The KCM still looks the same.
Reviewers: #kwin, mart
Reviewed By: #kwin, mart
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13422
Summary:
WindowBackgroundContrastRole property is a bool or undefined.
QVariant::isValid() returns true for QVariant(false) which is not what
we want for this code.
toBool on an invalid QVariant will return false.
Test Plan:
NA. Was based on code review.
To get a bug you'd have to PresentWindows/Slide effect manipulate a sliding popup, which
AFAIK doesn't happen.
Reviewers: #kwin
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13478
Summary:
Do not construct QStringList with classes of windows that ask for
permissions. Instead, create a static set of those window classes (to
avoid the unnecessary construction of QStringList and make lookups
faster).
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13440
The main problem was that inside the effect there was manualVerticalAngle,
which did not represent the actual rotation angle of the cube during the
animation, but used to calculate the position of the reflection. The actual
angle was calculated on-the-fly and was not exposed outside.
Brief description of what the code does:
- variables currentAngle and verticalCurrentAngle now always represent the
current position of the cube. They are updated when one uses the mouse and
inside the rotateCube() method, which is called in prePaintScreen().
- two queues, animations (used for Start / Stop / Left / Right) and
verticalAnimations (used for Up / Down) are used for scheduling the animations
if i.e. user presses several keys in a row. The code checks whether the last
animation has finished (and thus we need to start a new one) inside
prePaintScreen() and postPaintScreen()
- when the animation starts, code saves the starting position of the cube
inside startAngle, startFrontDesktop and verticalStartAngle variables, which
are used to calculate the actual cube position during the animation later.
This is done by startAnimation() and startVerticalAnimation(), which also
calculates the QTimeLine curves needed for animation
BUG: 213599
BUG: 373101
Differential Revision: https://phabricator.kde.org/D9860
Summary:
In D12678 blur was changed to use `blitFromFramebuffer()` instead of `glCopyTexSubImage2D()`
Now it checks if the GPU supports it.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13246
Summary:
Blur should now work on Wayland when scaling is used.
This does not affect X11 as `GLRenderTarget::virtualScreenScale()` is always 1 on X11
BUG: 391387
Depends on D12678
Test Plan:
- log in in a Wayland session
- turn display scaling to 2x
- open a transparent window (for example: Konsole with transparent and blur enabled profile)
- blurs the content under the window corretly
Reviewers: davidedmundson, #kwin
Reviewed By: davidedmundson, #kwin
Subscribers: romangg, apol, zzag, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12700
Test Plan:
* Maximized Konsole with enabled blur
* Everything works as expected
Reviewers: #kwin, mart
Reviewed By: #kwin, mart
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13156
Summary: It improves a little bit readability and comprehensibility of the code.
Reviewers: #kwin, mart
Reviewed By: #kwin, mart
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13116
Summary:
When disconnecting from `blurChanged` signal, `(w, connection)` pair is
being looked up three times. We can do better by using `QMap` in a more
STL-like way.
Reviewers: #kwin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D13118
Summary:
On wayland blur on secondary monitor would not render correctly.
BUG: 393723
Depends on D12452
Test Plan:
- use more than one output
- log in in a wayland session
- open a transparent window (for example: Konsole with transparent and blur enabled profile)
- drag the window to another screen
- blurs the content under the window corretly
Reviewers: #kwin, graesslin, davidedmundson
Reviewed By: #kwin, davidedmundson
Subscribers: apol, zzag, davidedmundson, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12678
Summary: For more details, see D12452.
Reviewers: #kwin, davidedmundson, fredrik, mart
Reviewed By: #kwin, davidedmundson, mart
Subscribers: romangg, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12466
Summary: Use the blur effect even while the window is being maximized/unmaximized.
Test Plan:
Before:
{F5828510}
After:
{F5828511}
Reviewers: #kwin, #vdg, graesslin, ngraham
Reviewed By: #kwin, #vdg, graesslin, ngraham
Subscribers: ngraham, graesslin, zzag, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12623
Summary:
Use the blur effect even when the present windows is used.
Previously it was only enabled for the close buttons and the dock.
Test Plan: {F5828442}
Reviewers: davidedmundson, fredrik, #vdg, #kwin, graesslin, ngraham
Reviewed By: #vdg, #kwin, graesslin, ngraham
Subscribers: ngraham, zzag, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12619
Summary:
`QGuiApplication::primaryScreen()->logicalDotsPerInch()` sometimes reports incorrect scale value, for example 95.951 (or even lower) instead of 96.0 at 1x scale and this caused to simply darken blurred areas instead of noising them.
This patch sets a minimum 1x scale for the noise texture, because realistically we will never be below that.
Reviewers: davidedmundson
Reviewed By: davidedmundson
Subscribers: davidedmundson, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12519
Summary:
When you have two windows ontop of each other and you turn them
transparent, evidently you'll be able to see through them.
Not only does it look unpolished if the desktop window flashes through
your windows, it can pose a privacy risk as you'd be able to briefly
look through the lock screen.
This patch fades apps to black intead of to transparent. As this looks
weird for panels, so windows are also faded to opaque (if relevant) at
the same rate.
BUG: 388384
Reviewers: #plasma, graesslin
Subscribers: luebking, plasma-devel, kwin, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9608
Summary:
Resetting timeline while animating a window causes some visual "glitches",
see videos below. Even though we can't use `QTimer::toggleDirection`,
that's safe to delete code which resets timeline because `prePaintScreen`
figures out correct direction of the timeline.
Before
{F5809862, layout=center, size=full}
After
{F5809898, layout=center, size=full}
Reviewers: #kwin, davidedmundson
Reviewed By: davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12254
Summary:
Resetting timeline while animating a window causes some visual "glitches",
see videos below. Even though we can't use `QTimer::toggleDirection`,
that's safe to delete code which resets timeline because `prePaintScreen`
figures out correct direction of the timeline.
Before
{F5809835, layout=center, size=full}
After
{F5809850, layout=center, size=full}
Test Plan:
* Set duration to 5000
* Furiously click an icon in the task manager
Reviewers: #kwin, davidedmundson
Reviewed By: davidedmundson
Subscribers: kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D12253
ModelViewMatrix used to paint windows (which is aware about
multi-monitor configuration) was overriden by reflectionMatrix when
painting reflections, leading to wrong placement of reflections.
Now we just multiply old matrix and reflection matrix.
BUG: 378688
Differential Revision: https://phabricator.kde.org/D10465
ModelViewMatrix used to paint windows (which is aware about
multi-monitor configuration) was overriden by reflectionMatrix when
painting reflections, leading to wrong placement of reflections.
Now we just multiply old matrix and reflection matrix.
BUG: 378688
Differential Revision: https://phabricator.kde.org/D10465
Summary: This is a follow-up for D11377, as requested by @graesslin. The patch removes the default shortcuts for the {nav Move zoomed area} actions.
Test Plan:
Deployed KWin with patch, killed and restarted KWin, created and logged into new user account, then zoomed in:
- {key Meta Ctrl Arrows} do not move the zoomed view
- The actions are still visible (without shortcuts) in {nav System Settings > Shortcuts > Global Shortcuts > KWin}
- You can still set custom shortcuts for the actions, and they work
Reviewers: #kwin, graesslin
Reviewed By: #kwin, graesslin
Subscribers: graesslin, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11526
Summary:
KWin's window management powers are not as discoverable as they could be--particularly tiling, which by default has no visible UI and no keyboard shortcuts. Resolving this issue is highly relevant to {T6831}.
This patch re-assigns the {key Meta arrowkeys} shortcuts that are currently used for `move zoomed area` (which are pretty esoteric, infrequently-used actions), adding {key ctrl} to their shortcuts. This allows us to use their valuable {key Meta arrowkeys} for more useful and commonly-used window management actions:
- {key Meta Left}: quick tile window to the left
- {key Meta Right}: quick tile window to the right
- {key Meta Up}: quick-tile window to the top
- {key Meta Down}: quick-tile the window to the bottom
The patch also sets some default shortctuts for minimize and maximize:
- {key Meta PageDown}: minimize window
- {key Meta PageUp}: maximize/de-maximize the window
Test Plan:
Do a clean build
`make test` (no new test failures)
Reboot
Create and log into a new user account
- {key meta up} tiles the active window to the top
- {key meta down} tiles the active window to the bottom
- {key meta left} tiles the active window to the left
- {key meta right} tiles the active window to the right
- {key meta PageDown} minimizes the active window
- {key meta PageUp} maximizes and de-maximizes the active window
- {key meta ctrl up} moves the zoomed area up
- {key meta ctrl down} moves the zoomed area down
- {key meta ctrl left} moves the zoomed area to the left
- {key meta ctrl right} moves the zoomed area to the right
Reviewers: #kwin, #plasma, romangg
Reviewed By: #kwin, #plasma, romangg
Subscribers: mart, romangg, broulik, jnoack, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D11377
Summary:
The new slide effect tries to separate each virtual desktop
as much as possible. This separation makes the new slide
effect more intuitive than the old one.
Test Plan:
* switch between virtual desktops
* or, move a window to another virtual desktop
Reviewers: #vdg, #kwin, #plasma, graesslin, ngraham
Reviewed By: #kwin, #plasma, graesslin
Subscribers: mart, graesslin, abetts, ngraham, plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9638
Summary:
Added the option to turn on noise behind the blurred area.
The lowest strength value disables it completely, so it is optional and is disabled by default.
Test Plan:
Edit: this new screenshot shows the updated noise generation.
Edit2: separated the screenshots so you can flick through them to clearly see the differences
{F5694024}
{F5694031}
{F5694025}
{F5694028}
Reviewers: #kwin, #vdg, fredrik
Reviewed By: #vdg, fredrik
Subscribers: davidedmundson, matheusm, romangg, ivan, zzag, ngraham, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10281
Summary:
Since the new blur is more efficient "fastblur" or "simpleblur" is not needed anymore for fullscreen blur.
Even my old low-end laptop from 2009 (with Intel T3300) can easily do fullscreen blur now with the new method without any hitch at all.
Reviewers: graesslin, #kwin, #plasma, #vdg, fredrik
Reviewed By: #vdg, fredrik
Subscribers: avaragic, fredrik, ngraham, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10181
Summary: The default blur value of 5/15 is too low.
Test Plan:
Before:
{F5681825}
After:
{F5681826}
Reviewers: #vdg, #kwin, fredrik
Reviewed By: #vdg, fredrik
Subscribers: ngraham, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10180
Summary: In D9848 the file permissions in effects/blur where accidentally changed from 644 to 755.
Test Plan: {F5674656}
Reviewers: #kwin, hein
Reviewed By: hein
Subscribers: kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D10100
Summary:
Updated the old and outdated blur method to use the much more efficient dual kawase blur method.
Now with this we can do virtually infinite blur with very very little performance cost.
The dual kawase blur method is basically downscaling and upscaling an image, but combined with the kawase blur shader.
Comparison: https://i.imgur.com/mh6Cw61.png
Left is old, right is new.
Comparison was done with the strongest blur setting in a VM running on an Intel i7-4790 and a GTX980
We can see here that the performance is even better with this new method.
Reviewers: #plasma, #kwin, graesslin, fredrik
Reviewed By: fredrik
Subscribers: hein, dos, luebking, broulik, romangg, zzag, anthonyfieroni, mart, davidedmundson, fredrik, ngraham, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9848
Summary:
It is known to create problems especially on multi-screen and is not as
important on Wayland as it used to be on X11 thanks to things like
buffer age and in general better rendering.
Test Plan: Opened the config module and verified that the option is
hidden
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9879
Summary:
Currently, slide effect doesn't handle a case when there
is a moving client. This results in having window jumps.
This commit fixes it by fixing position of the moving client
during switching to another desktop.
Test Plan: * send window one desktop to the left/right using shortcuts
Reviewers: #kwin, #plasma, graesslin
Reviewed By: #kwin, #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D9487
Summary:
At the moment, there is no way to tweak duration of the slide animation.
This change adds a configuration module so it is possible to change
the duration.
Test Plan:
* enable virtual desktops
* go to `System Settings > Desktop Behaviour > Desktop Effects`
and select Slide effect under "Virtual Desktop Switching Animation"
* click settings/options button and change duration
Reviewers: #kwin, #plasma, graesslin
Reviewed By: #kwin, #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D9382
Especially the BlurEffect::expanded() method is called a lot.
Saves creating a temporary QVector.
Differential Revision: https://phabricator.kde.org/D9101
Summary:
Without Xwayland KWin starts so fast that the creation of the EffectFrame
triggers a crash in the Wayland integration as the KWin internal
connection isn't fully setup.
To workaround this crash the creation of the EffectFrame is delayed till
the first usage. It doesn't make sense to try to fix the actual crash as
it would require to defer the creation of all Effects.
Test Plan: New test case added which crashes without this fix.
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8821
Summary: Fixes the build with D8705
Test Plan: Just adds includes, I wonder if it should go into Plasma/5.8 and /5.11 too
Reviewers: #plasma, davidedmundson
Reviewed By: #plasma, davidedmundson
Subscribers: graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D8706
Summary:
Instead of calling reconfigure() on screen size changes, which deletes
and recreates the effect, we can just update the one texture that's mapped to
the screen size.
---
From the wayland commit.
>What surprises me is that BlurManager recreates for Output changes.
>That sounds like a bug in KWin (or an area which could be improved).
I had thought the same and wrote this (though wanted to have kwayland fixed first)
Test Plan:
Logged in and out (my screen resizes on startup due to scaling)
Tested on my X machine by turning a screen off. Nothing broke, plasma
panels looked the same.
Note: Eike tried this patch last week and claimed kwin still crashed.
We don't have a backtrace so it could have been something unrelated,
applied wrong or that he was deliberately lying to wind me up.
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin, #kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7877
Summary:
Similar to the Blur patch. Arguably rven less reason as this doesn't
have a texture the size of the workspace.
We don't need to delete and recreate the entire effect every time the
screen changes; This deletes the wayland global which causes quite a bit
of extra work for the clients.
Test Plan:
Changed resolution under X, and scale under wayland
Panel looked the same and nothing exploded
Reviewers: #plasma, graesslin
Reviewed By: #plasma, graesslin
Subscribers: graesslin, plasma-devel, kwin, #kwin
Tags: #plasma
Differential Revision: https://phabricator.kde.org/D7937
Keeps it from loading the Svg and all the Plasma stuff (Theme etc) that comes with it on startup.
Differential Revision: https://phabricator.kde.org/D8011
Summary:
Several effects announce a support property atom on the root window. This
change forwards the KWin::Application's signal that the xcbConnection
changed to the EffectsHandler so that the effects can respond to it.
All effects which announce a support property connect to this new signal
and re-announce the property. In case the xcb connection died (future
XWayland crashing case) it is set to XCB_ATOM_NONE by that. In case the
xcb connection got created (future delayed XWayland startup) the atom is
set to the proper value.
In addition all usages of the support properties are guarded, so that no
nonesense actions are performed if the support property is XCB_ATOM_NONE.
Test Plan: Only compile tested as we don't have XFree KWin yet
Reviewers: #kwin, #plasma
Subscribers: plasma-devel, kwin
Tags: #kwin
Differential Revision: https://phabricator.kde.org/D7761
