This method replaces the X-KDE-ORDERING property in the Effect's desktop
files. This change is a preparation step for integrating the new Effect
Loader which doesn't read the ordering information. Thus it needs to be
provided by the Effect itself so that the EffectsHandler can properly
insert it into the chain.
Also for the built-in Effects on the long run it doesn't make much sense
to install the desktop files. And binary plugin effects will migrate to
json metadata which also doesn't have the KService::Ptr. Thus overall it
simplifies to read this information directly from the Effect.
Affected effects
* Blur and Contrast Shader to get atom name
* Glide effect for the slide atom
* startupfeedback for cursor size - read from config now and cached
* showfps used an xsync, replaced by flush
* logout effect for creating hack items
REVIEW: 116828
Most is just switched to the ::read(). That should be enough for all the
Effects which have a KSharedConfig::Ptr underneath. If not we just need
to find a good place to put the reload.
Instead of using EffectsHandler::sendReloadMessage we generate the dbus
interface in each plugin and call the reconfigure slot directly. That way
it's more type safe and we don't need to link kwineffects from the
configs.
REVIEW: 116875
There are no advantages for the effects KCM to have all the effect
config modules in one plugin.
By having a plugin per effect we can use the KPluginTrader to easily
find the configuration plugin for a given effect and load it.
To make this possible the following changes are done:
* config_builtins.cpp is deleted
* add_subdirectory is used for all effects which have a config module
* toplevel CMakeLists.txt contains the sources again for the effects
which have a config module, but effects which don't have a config
module are still included and thus the macro is still used
* plugin created for the config module, name pattern is:
kwin_effectname_config
* plugin installed to ${PLUGIN_INSTALL_DIR}/kwin/effects/configs
* desktop file adjusted to new plugin name and keyword removed
* desktop file converted to json as meta data and no longer installed
* Uses K_PLUGIN_FACTORY_WITH_JSON
* Macros for config are dropped from kwineffects.h
REVIEW: 116854
KWin already has a de facto OpenGL 2 dependency through QML. Combined
with the fact that the OpenGL 1 backend is basically unmaintained and
also unused, it's better to remove it for the new major release.
This change includes:
* Removal of cmake option KWIN_BUILD_OPENGL_1_COMPOSITING
* Removal of KWIN_HAVE_OPENGL_1 compile option and all code
ifdef'ed with it (partially removal of if-else constructs)
* Removal of CompositingType::OpenGL1Compositing (flags are kept
as a core flag should get introduced)
* Driver recommendation for OpenGL1Compositing changed to XRender
(should be evaluated whether the drivers can provide GL2)
* Removal of configuration option "GLLegacy"
* Removal of fooMatrix function in kwinglutils
* Removal of ARBBlurShader
* Removal of legacy code path in GLVertexBuffer
* Removal of GLShaderManager::disable
* if-blocks with ShaderManager::instance()->isValid() removed
REVIEW: 116042
Rational behind this change is that displayWidth and displayHeight are
X specific API calls in kwinglobals. For the future it's easier to only
rely on functionality which goes through the EffectsHandler API which
allows easier adjustments in KWin core.
displayWidth() and displayHeight() are only used to get the size or the
complete rect of all screens. This is also provided by:
effects->virtualScreenGeometry() or
effects->virtualScreenSize()
REVIEW: 116021
As all effects have always been compiled into the same .so file it's
questionable whether resolving the effects through a library is useful
at all. By linking against the built-in effects we gain the following
advantages:
* don't have to load/unload the KLibrary
* don't have to resolve the create, supported and enabled functions
* no version check required
* no dependency resolving (effects don't use it)
* remove the KWIN_EFFECT macros from the effects
All the effects are now registered in an effects_builtins file which
maps the name to a factory method and supported or enabled by default
methods.
During loading the effects we first check whether there is a built-in
effect by the given name and make a shortcut to create it through that.
If that's not possible the normal plugin loading is used.
Completely unscientific testing [1] showed an improvement of almost 10
msec during loading all the effects I use.
[1] QElapsedTimer around the loading code, start kwin five times, take
average.
REVIEW: 115073
* "" needs to be wrapped in QStringLiteral
* QString::fromUtf8 needed for const char* and QByteArray
* QByteArray::constData() needed to get to the const char*
In effects it's obvious that compositing is enabled, so specifying the
translucent element is no problem.
In tabbox a context property "compositing" is injected which decides
whether "translucent" or "opaque" elements should be used. Here the
translucent elements are only used if the Blur effect is available - for
this a new Effect::Feature Blur is introduced and in addition it is
tested whether the theme provides the translucent element.
Also the masking is adjusted to ensure that only the shadow is not
blurred.
Reason for this change is that Plasma theme seems not always to pick up
whether compositing is used when used from inside KWin. It does not cover
the Desktop Change OSD which uses PlasmaCore.Dialog and there we cannot
(yet) inject that we use compositing.
Overall I'm quite unhappy with this patch and I do hope we can fix it in
the proper place in the lifetime of 4.10 and revert this patch.
CCBUG: 311995
REVIEW: 108438
Instead of each effect, which needs to announce support, having custom
code to create a property and set it on the root window, there is now a
common API in EffectsHandler to take care of this.
The methods takes care of creating the atom if it has not already done
and set the property on the root window. Furthermore it allows multiple
effects to announce the same property without getting in conflict with
each other.
As a further convenience the property is automatically removed when the
effect is unloaded, so less things an effect author has to care about.
REVIEW: 107815
A decoration can provide the AbilityAnnounceAlphaChannel in addition to
AbilityUsesAlphaChannel. If this ability is provided the decoration can
enable/disable the use of the alpha channel through setAlphaEnabled().
The base idea behind this mechanism is to be able to tell the compositor
that currently alpha is not needed. An example is the maximized state in
which the decoration is fully opaque so that there is no need to use the
translucency code path which would render all windows behind the deco.
In addition also the blur effect honors this setting so that behind a
known opaque decoration no blurring is performed.
Oxygen is adjusted to disable translucency in maximized state and Aurorae
is adjusted to allow themes to enable/disable translucency. For Plastik
translucency and with that also blurring is disabled.
REVIEW: 106810
The logic has already ensured that the ARBBlurShader can only be used
when using the OpenGL1 compositor, the OpenGL 2 compositor needs to use
the GLSLBlurShader.
This change moves the complete ARBBlurShader into a KWIN_HAVE_OPENGL_1
ifdef section.
As a side-effect the ::create method can now return a NULL pointer which
makes more sense then returning an ARBBlurShader in case that the
GLSLShader is not supported.
REVIEW: 106738
If the build option is enabled KWIN_HAVE_OPENGL_1 is passed as a compile
flag when build against OpenGL.
This compile flag is meant to replace the KWIN_HAVE_OPENGLES. So far code
has been ifdefed for special behavior of OpenGL ES 2.0 and to remove
fixed functionality calls which are not available in OpenGL ES 2.0.
With this build flag the fixed functionality calls which are only used in
the OpenGL1 Compositor can be removed and keeping the KWIN_HAVE_OPENGLES
for the real differences between OpenGL 2.x and OpenGL ES 2.0.
E.g. a call like glColor4f should be in an
glColor4f(1.0, 1.0, 1.0, 1.0);
while a call like glPolygonMode should be in an
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
Building for OpenGL ES 2.0 of course implies that KWIN_HAVE_OPENGL_1 is
not defined.
Given that the Catalyst driver is now supporting direct rendering and by
that can use the OpenGL 2 code path we do no longer need to force
disable the Blur effect and Lanczos filters which used to crash in the
ARB shader path.
The ARB shader path - which can only be used in OpenGL 1 - is kept
disabled for Catalyst.
CCBUG: 270818
CCBUG: 286795
REVIEW: 106798
The main usage of ShaderManager::isValid was to have OpenGL2 specific
code pathes. Now we have an actual OpenGL2Compositing type and we know
that the ShaderManager is valid if we have this compositing type and we
know that it is not valid on OpenGL1Compositing. This gives us a much
better check and allows us to use the isValid method just for where we
want to check whether the shaders compiled successfully.
In addition some effects require OpenGL2, so we do not need to check
again that the ShaderManager is valid. Such usages are removed.
The supportInformation is extended to also read the properties
on all effects. In addition each effect can be queried just for
itself through D-Bus, e.g.:
qdbus org.kde.kwin /KWin supportInformationForEffect kwin4_effect_blur
All effects are extended to provide their configured and read
settings through properties. In some cases also important
runtime information is exposed.
REVIEW: 105977
BUG: 305338
FIXED-IN: 4.9.1
The public member variables for opacity, saturation and brightness
are removed in favor for getter and setters. The variables are
moved into a private class. Those are now qreal instead of double.
To make usage inside the effects easier a multiply method is added
which multiplies the current value with passed in factor and returns
the new value in a functional programming style.
This commit is the top-most of a patch series to refactor
ScreenPaintData and WindowPaintData. Other related commits are:
* 0811772
* ebdc7ec
* 2c8dd8d
* 7699726
* 68e0201
* 611cb09
REVIEW: 105141
BUG: 303314
FIXED-IN: 4.10
No effect has ever made use of contents opacity. Which means it
is not needed. Removing means faster effects as we used to
multiply the value (always 1.0) with the opacity in each frame
for each window.
Effects can specify their minimum requirements in their
desktop file:
* OpenGL
* OpenGL 2 (GLSL required)
* Shaders (either ARB or OpenGL 2)
The configuration module uses this information in combination
with which backend KWin is currently using. So if e.g. OpenGL
is used and an effect requires OpenGL 2 a detailed error
message can be showed that OpenGL 2 is required.
BUG: 209213
FIXED-IN: 4.9.0
REVIEW: 104847
This makes kwin in OpenGL2 mode more coherent with kwin_gles.
Despite some fullscreen effects they should now make the same
(pure) OpenGL calls.
REVIEW: 103804
This reduces the repaints in cases where several blur regions are
stacked on top of each other (e.g. oxygen-transparent) and the topmost
layer needs to be updated (e.g. a blurry window is moved).
The old blur version wrongly marked a cache region as valid with the
reason that this region would never become visible. It didnt matter
because the only case that this region could become visible was a
movement of the window on top, which back then would have forced a
workspace repaint of that region and as such would have invalidated
the cache anyway. With the introduction of addLayerRepaint the
last point is no longer true and we have to track the valid cache
regions more carefully.
This patch adds a new function Toplevel::addLayerRepaint, that in contrast
to addWorkspaceRepaint does not invalidate every blur texture cache that
overlaps with that region. As the name suggests it rather invalidates the
to the window associated layer at that position. This is especially useful
in the case of move/resize events in combination with oxygen-transparent,
where the altered window is almost always the topmost window and the blur
texture cache of the windows underneath are unchanged.
For the case of fully opaque windows the behaviour of addLayerRepaint
and addWorkspaceRepaint should be same.
REVIEW: 103906
Too many crash reports in the fglrx driver when using ARB shaders.
It's a pity to disable functionality for all fglrx users, but it's
better than crash reports.
Blur effect can still be enabled manually and Lanczos can still be
enabled through the environment variable.
REVIEW: 103556
CCBUG: 270818
CCBUG: 286795
Finally it is possible :-) If it causes an impact on performance
during the release candidates I'm going to revert.
REVIEW: 103375
BUG: 255106
FIXED-IN: 4.8.0
This fixes graphical glitches that appear next to the borders of plasma
tooltips. Additionally I added a variable that forces the effect to
drop the cache, which might be useful in the future to fix bugs.
This should fix 2 issues with the blur effect:
- It is now sufficient to have a damaged EXPANDED blurArea to trigger
an update of the caching texture.
- No glitches in cases where the taskbarthumbnail effect paints a
thumbnail of a blurred window.
CCBUG: 288568
This patch introduces some kind of damage propagation. In the old version of the blur effect
we had to repaint the whole window if sth behind the blurred area was damaged. The new texture
cache, which was introduced by the last patch, gives us the opportunity to only update parts of
blurred background texture. This means that the damaged area can only propagate with the speed
of the blurring radius per window layer.
REVIEW: 102665
This patch adds an optional texture cache to the blur effect such that damaged windows in
front of the blurred region dont trigger a repaint of the whole blurred region which pretty
often results in a avalanche repaint of nearly the whole screen.
REVIEW: 101977
This is actually a bloody hack by forcing the screen to be
repainted in each frame. This needs to be fixed in a different
way or we at least have to turn blur off by default for GLES in
the next release.
Optimize the region of the screen that's painted in each frame,
and paint the windows top-to-bottom when the damaged region doesn't
intersect any blurred areas.
The branch contains the first step in reworking the kwineffects
library. This includes:
* replacing virtuals by signals and slots
* dropping some unused methods
* remove KWin::TimeLine
More to come.
Conflicts:
kwin/workspace.cpp
QMatrix4x4 accepts data in row-major order, but returns them in
column-major order, which is not documented and because of that
I expected them to be in row-major order.
This commit fixes it and rewrites the shaders to apply the matrix
multiplications in the right order.
REVIEW: 100759
All previously existing windowAdded methods are renamed to slotWindowAdded.
EffectsHandlerImpl is connected to Workspace's clientAdded signal, which is
emitted a little bit earlier than the previous direct method call. This might
change behavior.
Another signal is added to Workspace to signal that an unmanaged is added.
Since the EffectFrames have been moved into KWin core nothing in the
Effects lib actually used Plasma. The only remaining method is moved
to core as it's not used in the Effects. The Effects itself still
link against Plasma, so nothing changes for them.
The Plasma includes in the kwineffects header seemed to pull in
quite some additional headers, so the includes in some effects have
to be adjusted (most often KConfigGroup). This should speed up the
compilation of the library and the effects.
It now uses a GLShader for GLSL shaders and pushes it using the
ShaderManager.
It does not work with the nouveau driver plus GLES, but it works
with fglrx + desktop GL 2.x, so I assume it is a driver problem here.
svn path=/trunk/KDE/kdebase/workspace/; revision=1213663
The following changes were in SVN, but were removed from git:
M wallpapers/Air/metadata.desktop
M wallpapers/Autumn/metadata.desktop
M wallpapers/Blue_Wood/metadata.desktop
M wallpapers/Grass/metadata.desktop
M wallpapers/Hanami/metadata.desktop
M wallpapers/Horos/metadata.desktop
M wallpapers/Media_Life/metadata.desktop
M wallpapers/Plasmalicious/metadata.desktop
M wallpapers/Quadros/metadata.desktop
Adding a new AbilityUsesBlurBehind which can be set by decorations with
alpha channel to request that the background can be blurred. This improves
the situation for our completely opaque default Oxygen decoration.
This change is a behavior change in comparison to 4.5! Translucent decorations do
not get blurred by default any more.
CCMAIL: craig.p.drummond@googlemail.com
svn path=/trunk/KDE/kdebase/workspace/; revision=1195274
This allows using Lanczos filter also on systems not supporting GLSL.
See http://svn.reviewboard.kde.org/r/5777/
svn path=/trunk/KDE/kdebase/workspace/; revision=1195273
svn path=/trunk/KDE/kdebase/workspace/; revision=1191511
The following changes were in SVN, but were removed from git:
M wallpapers/Aghi/metadata.desktop
M wallpapers/Air/metadata.desktop
M wallpapers/Autumn/metadata.desktop
M wallpapers/Blue_Wood/metadata.desktop
M wallpapers/Ethais/metadata.desktop
M wallpapers/Evening/metadata.desktop
M wallpapers/Fields_of_Peace/metadata.desktop
M wallpapers/Finally_Summer_in_Germany/metadata.desktop
M wallpapers/Fresh_Morning/metadata.desktop
M wallpapers/Grass/metadata.desktop
M wallpapers/Hanami/metadata.desktop
M wallpapers/Media_Life/metadata.desktop
M wallpapers/Plasmalicious/metadata.desktop
M wallpapers/Quadros/metadata.desktop
M wallpapers/Red_Leaf/metadata.desktop
BlurEffect::supported().
- Don't announce support to clients if the shader failed to compile,
or the FBO is invalid.
svn path=/trunk/KDE/kdebase/workspace/; revision=1179268
svn path=/trunk/KDE/kdebase/workspace/; revision=1177799
The following changes were in SVN, but were removed from git:
M wallpapers/Blue_Wood/metadata.desktop
M wallpapers/Ethais/metadata.desktop
M wallpapers/Fields_of_Peace/metadata.desktop
M wallpapers/Finally_Summer_in_Germany/metadata.desktop
M wallpapers/Grass/metadata.desktop
M wallpapers/Media_Life/metadata.desktop
M wallpapers/Quadros/metadata.desktop
Currently only scaled or translated windows were excluded,
but it is possible to also have windows with just changed
window quads (e.g. magic lamp).
CCBUG: 243693
svn path=/trunk/KDE/kdebase/workspace/; revision=1169160
svn path=/trunk/KDE/kdebase/workspace/; revision=1155392
The following changes were in SVN, but were removed from git:
M wallpapers/Autumn/metadata.desktop
M wallpapers/Blue_Wood/metadata.desktop
M wallpapers/Grass/metadata.desktop
M wallpapers/Hanami/metadata.desktop
It uses a new config group Blacklist in kwinrc with two subgroups for Lanczos and Blur.
The key of each entry in the group referrences the vendor either using GL_VENDOR or GL_RENDERER, e.g. "Intel" in renderer for Intel based chips.
The value of the entries is a stringlist containing exactly the renderer information. This way it is possible to blacklist several mesa driver versions which are buggy.
The blacklist is currently empty and will be filled with a kconf update script (which could also be done by distributions). So all users who experience problems and are subscribed to the bugs receiving this message, please upload your glxinfo.
An example for a blacklist:
[Blacklist][Lanczos]
NVIDIA=GeForce 9400M/PCI/SSE2
CCBUG: 243181
CCBUG: 242985
svn path=/trunk/KDE/kdebase/workspace/; revision=1146195
svn path=/trunk/KDE/kdebase/workspace/; revision=1144023
The following changes were in SVN, but were removed from git:
M wallpapers/Autumn/metadata.desktop
M wallpapers/Blue_Wood/metadata.desktop
M wallpapers/Ethais/metadata.desktop
M wallpapers/Grass/metadata.desktop
M wallpapers/Hanami/metadata.desktop
M wallpapers/Media_Life/metadata.desktop
Used in cube animation for all sticky windows and in desktop grid for the add/remove desktops window.
svn path=/trunk/KDE/kdebase/workspace/; revision=1137489
The texture needs to be drawn on screen coordinates on the offscreen
framebuffer in the horizontal pass, otherwise pixels that fall below
the screen won't be clamped to the screen edge in the subsequent
vertical pass. This is because the offscreen buffer is the same size
as the screen.
This change also gets rid of the need to clear the offscreen buffer
before blurring the screen contents behind each window, and reduces
the CPU computations done on the blur region.
svn path=/trunk/KDE/kdebase/workspace/; revision=1137134
svn path=/trunk/KDE/kdebase/workspace/; revision=1121015
The following changes were in SVN, but were removed from git:
M wallpapers/Aghi/metadata.desktop
M wallpapers/Curls_on_Green/metadata.desktop
M wallpapers/Plasmalicious/metadata.desktop
M wallpapers/The_Rings_of_Saturn/metadata.desktop
This makes the blending work correctly when the alpha bits are zero,
which is apparently the case with NVidia.
svn path=/trunk/KDE/kdebase/workspace/; revision=1102471
Applications can use this hint to specify the region under the
the window where the blur effect will be applied.
svn path=/trunk/KDE/kdebase/workspace/; revision=1100036
